Transcript Document

Patented Space Saver EMT Fittings
Crouse-Hinds
Training Module
Patented Space Saver EMT Fittings
Outline
Applications
Product Features
Certifications and Compliances
Catalog Numbers
Marketing Materials
Patented Space Saver EMT Fittings
Applications
Cooper Crouse-Hinds Space Saver Fittings are used to:
• Join EMT conduit to a box or enclosure in dry locations or
for use in poured concrete. Concrete Tight when taped.
•Available in both Set-Screw and Compression 1/2” – 1”
Patented Space Saver EMT Fittings
Product Features
•Male Threads on the locknut allow for
more room inside box
•Smooth pulling surface won’t strip cable –
no bushing or insulated throat required
•Angled teeth on the locknut bite into
enclosure, preventing
loosening from vibration
•Produced from steel tube and zinc
electroplated for corrosion resistance
Patented Space Saver EMT Fittings
Product Features
Traditional EMT Fitting
With Plastic Bushing
Patented Space Saver
EMT Fitting
Patented Space Saver EMT Fittings
Set-Screw Connectors:
•Tri-head set screw may be installed
using a slotted, Phillips or Robertson
head screwdriver
• Knurled wrenching surface for easy
tightening
Patented Space Saver EMT Fittings
Compression Connectors:
The hex surfaces on the
compression nut provide for
easy wrenching to quickly
and
easily tighten the nut
Compression type features a split
compression ring that assures
a solid attachment to the
conduit and good ground
continuity
Patented Space Saver EMT Fittings
Labor Savings
Traditional EMT connector
protrudes inside box and
creates the cumbersome and
labor intensive need to clip
the device mounting screw to
install device.
The Space Saver EMT Connector’s
low profile design eliminates this
cumbersome and labor intensive
requirement.
Patented Space Saver EMT Fittings
Materials and Finishes
•Material: Steel
•Finish: Zinc Plated
Patented Space Saver EMT Fittings
Certifications and Compliances
•UL Standard 514B
•CSA Standard C22.2 No. 18
Patented Space Saver EMT Fittings
Catalog Numbers
Set-Screw
SS
BC
Space Saver
Box Connector
50
50 = 1/2”
75= 3/4”
100= 1”
Compression
SS
C
50
Space Saver
Compression
50 = 1/2”
75= 3/4”
100= 1”
Patented Space Saver EMT Fittings
Marketing Materials
Commercial Products Catalog
Commercial Products Pocket Guide
Newly Created Sell Sheet
Space Saver Counter Display
www.crouse-hinds.com
Patented Space Saver EMT Fittings
COMPETITORS
NONE!
Patented Space Saver EMT Fittings
Innovative Labor Saving Product
Space Saver takes up virtually no
room inside the box
Available in both set screw and
compression trade sizes 1/2” – 1”
Unique Patented Product Not Offered
By Our Competitors