Tri-Tech Medical Inc.

Medical Gas Outlets

Medical Gas Outlets

 DISS  Ohmeda style  Allied style  Puritan style  Recessed wall  DISS Recessed ceiling  Surface wall  Console / Headwall  Ambulance / Surgical Arm

Common Backs  Recessed/Console  360º swivel inlet tube  1/2” OD copper tubing  Accommodates all styles of Outlet Latch Plates  ETL listed  Ambulance/ Surgical Arm  360º swivel inlet tube  DISS or hose barb  Accommodates all styles of Outlet Latch Plates  ETL listed

DISS Outlets

 Frontall™ design  Gangable  Full faceplate color coding  5 inch centers  Primary & secondary checks  360° positioning of extension tube

DISS Surface Outlets  Frontall™ design  Full faceplate color coding  Primary & secondary checks

Frontall™ Feature

 Allows routine service of both the primary and secondary check valves

without

removing the nameplate or gas specific portions.

 Very fast & easy to service  Primary check cartridge

Repairing DISS Front Bodies  These parts would be ordered separately  Cartridge (Negative and Positive gases)  Primary Check Seat and Ball Check (Positive gases only)  Chrome-Plated Body

Ohmeda Style Outlets

Ohmeda Style Outlets      Accepts Ohmeda gas specific compatible male adaptors Gangable 5” centers Allows routine service of both the primary and secondary check valves.

Full faceplate color coding

Ohmeda Style Surface Outlet  Accepts Ohmeda gas specific compatible male adaptors  Allows routine service of both the primary and secondary check valves.

 Full faceplate color coding

Repairing Ohmeda style fronts  Remove screws  Remove body and plate

U-clip and washer remain.

 Front body and plate

 Replace body  Replace plate and screw

XQ1000-D Ohmeda style Front Latch Body  Can be ordered as an assembly, or in parts

Allied Style Outlets

Allied Style Outlets   Accepts Allied style gas specific compatible male adapters Gangable, 5” centers     Full faceplate color coding 1/2” OD copper tubing Metal back and front plates 360º swivel inlet tube

Allied Style Surface Outlets  Accepts Allied gas specific compatible male adapters  Full faceplate color coding

Repairing an Allied Style Front  Remove screws  Remove body and plate

 Position o-ring and washer on new body  Place body on housing and replace plate

 Replace Screws

XA1000-D Front Latch Body  Can be ordered as an assembly, or in parts

Puritan Style Outlets

Puritan Style Outlets  Accepts Puritan style gas specific compatible male adapters  Gangable, 5” centers  Full faceplate color coding  1/2” OD copper tubing  Metal back and front plates  360º swivel inlet tube

Puritan Style Outlets  Accepts Puritan gas specific compatible male adapters  Full faceplate color coding

Repairing a Puritan Style Front  Using manual screwdriver, remove screws  Remove body and small plate

 Remove ONLY these parts

 Replace parts or entire body  Screw plate back in place with Manual screwdriver.  Do not over tighten

XP1000-E Puritan Latch Body  Can be ordered as an assembly or in parts

Console / Headwall Outlets  Available in DISS, Ohmeda, Puritan and Allied styles  DISS style includes Frontall™ features  Full faceplate color coding  Optional trim plate available

Console / Headwall Outlets

Console / Headwall Outlets

Ambulance / Surgical Arm Outlets  Available in DISS and Quick Connect styles  DISS and hose barb inlet connections  DISS includes Frontall™ features  Full faceplate color coding

DISS x ¼” npt outlets and DISS x hose barb outlets

Fairfield Rail

Fairfield Rail Outlets  Three different styles

Outlet Conversion Kits

Conversion Kits

Conversion Kit - Disassembly

Conversion Kits - Disassembly

Conversion Kits - Installation

Trim Plates  Single gang through six gang  Large array of on center spacing  Can be customized to meet your needs

Ohmeda to Ohmeda Conversion Kits  Available for Diamond I to Diamond III  Available for Diamond II to Diamond III  Easy to install  Easy to service

Other Ohmeda Conversion Kits  Available for Melco/Foregger/Linde 9/16-18 and Chemetron/NCG to Diamond III  Easy to install and service

 

NFPA 99 REQUIREMENTS FOR STATION OUTLETS/INLETS



GAS SPECIFIC TRI-TECH PRODUCT YES



STATION OUTLET TO HAVE PRIMARY AND SECONDARY CHECK YES



STATION INLET TO HAVE PRIMARY CHECK (SECONDARY CHECK PERMITTED) YES



SECONDARY VALVE TO CLOSE WHEN PRIMARY VALVE IS REMOVED YES YES YES



EACH OUTLET/INLET LEGIBLY IDENTIFIED ACCORDING TO 5.1.11.3



THREADED OUTLETS/INLETS SHALL COMPLY WITH CGA V-5 (DISS)

 

STATION OUTLET/INLET COMPONENTS THAT ARE GAS SPECIFIC NOT INTERCHANGEABLE

   

COPPER TUBES ON STATION OUTLETS SHALL BE 3/8 OD MIN AND LESS THAN 8 INCHES LONG COPPER TUBES ON STATION INLETS SHALL BE ½ OD MIN AND LESS THAN 8 INCHES LONG

   

ADDITIONAL TESTING PERFORMED BY TRI-TECH INITIAL PRESSURE TEST AND FINAL TIE IN TEST REQUIRED FOR LEAKAGE AS WELL AS THE OPERATIONAL PRESSURE TEST REQUIRED FOR FLOW IS PERFORMED ON ALL STATION OUTLETS/INLETS PRIOR TO SHIPPING YES YES YES

Tri-Tech Medical Inc.

Gas Control Panels and Gas Control Panel Conversion Kits

Gas Control Panel  Stainless steel front   Self-relieving regulator Frontall™ DISS outlet features  High quality ball valve   Painted steel rough-in box 2” Inlet & outlet pressure gauges

TRI-TECH MEDICAL GAS CONTROL PANELS: FEATURES INCORPORATES A SELF RELIEVING REGULATOR SUPPLY GAGE AND DELIVERY GAGE CARTRIDGE STYLE DISS OUTLET FOR EASY SERVICING USER INSTRUCTIONS ON THE PANEL OUTLET RISER FOR FEEDING DOWNSTREAM EQUIPMENT OR ADDITIONAL OUTLETS CAN DELIVER UP TO 250 PSI WITH AN ADEQUATE SUPPLY PRESSURE CAN BE ORDERED WITH A DISS NITROGEN, INSTRUMENT AIR, OR CARBON DIOXIDE OUTLET NP100 - NITROGEN DISS 1120 IP100 - INSTRUMENT AIR CP100 - CARBON DIOXIDE DISS 2080 DISS 1080

               

MIDAS REX EQUIPMENT: APPROX 5% OF TOOLS IN FIELD ARE OLDER TOOLS REQUIRING 50 - 200 PSI - 900 CFH - 425 LPM NEW TOOLS REQUIRE 20 - 120 PSI - 720 CFH - 340 LPM OR 481 CFH - 227 LPM NITROGEN CONTROL PANEL MAXIMUM FLOW CAPACITY BASED ON 180 PSI INLET FLOWING TO ATMOSPHERE STATIC DEL FLOW PRESSURE PSIG SCFH 100 110 930 1030 FLOW LPM 440 486 DEL PRESS FLOWING PSIG 96 106 120 130 150 170 1110 1150 1175 1180 524 543 555 557 114 119 120 120

Gas Control Panel Conversion  Converts existing panels by several major brands  Same features as our regular panel  Easy to install using a universal mounting plate over existing back box

Gas Control Panel Conversion  Existing back box

Gas Control Panel Conversion  Installing conversion connections

Gas Control Panel Conversion  Installing conversion plate

Gas Control Panel Conversion  Back of the front panel conversion

Gas Control Panel Conversion  Connecting tube

Gas Control Panel Conversion  Installing gas control panel