Transcript MP PUMPS, INC.

We don’t just go with the flow, we create it.
Who is MP Pumps?
• Established in 1942
• Right-sized pump company
• Small enough to be creative
• Large enough to handle high volume orders
• Custom pump capabilities
• ISO 9001 and 14001 certified
• Lead times within 10 working days
• Machining and assembly done in Fraser, MI.
• That’s in the USA!
Company Capabilities
•
•
•
•
•
•
•
•
Design
Research & Development
Machining & Assembly
Quality Control
Customer Service
Technical Support
Sales Support
Global Sales
Key Markets Served
•
•
•
•
•
•
•
Industrial
Marine
Agricultural
Transportation
Warewash
Petroleum
Military
Product Line
™
™
•
•
•
•
•
The Original self priming pump of it’s kind!
Made in the U.S.A. since 1956.
Available from 1 ½” NPT to 4” NPT.
Lift capabilities up to 25’
Close coupled, pedestal, hydraulic, and engine
drives available
• Multiple impeller options to maximize performance
• Available in cast iron, stainless steel, bronze, and
aluminum
• Bronze pumps constructed with Federalloy I-836
(no lead)
• ABS type approval for FM 8,15, 30, and 40
• Agricultural flanges available
• Flomax also offers the “Cadillac” of double seals
with its charged grease cartridge offering lasting
protection against dry-run conditions.
• Pump ends are backed with a 2 year warranty!
• Our Flomax is even better today and here’s why…
Flomax pumps – Design improvements
O-ring seal for
discharge flange
Bosses drilled and
tapped for wear plate
O-ring seal between
the housing and
adapter
Fill port for priming
chamber
Flomax Applications
•
•
•
•
•
•
•
•
Filtration
Dewatering
Mining
Bilge
Ballast Transfer
DEF
Fertilizer Transfer
Water parks-water
falls
•
•
•
•
•
•
•
Fire protection
Potable water
HVAC
Deicing
Sump
Machine coolant
Fish farms
•
•
•
•
Investment Cast to Last!
Cast 316 SS pump for your critical applications
No thin wall stampings or welds
Close coupled, pedestal, hydraulic, and engine
drives available
• Competitive pricing
• Nickel Aluminum Bronze material (CF 1-4)
• Excellent for warm sea water applications
Chemflo Applications
• Pharmaceutical
• Chemical transfer
• DEF (Diesel Exhaust Fluid) – for larger volume
transfer in stationary bulk transfer applications
• Potable water
• Deicing – spraying salt brine on roads or landing
strips for pretreatment
• Desalination
• Breweries
• The STANDARD that MP Pumps was built
around.
• Also known as our Series pumps
• Sizes from 1” X ¾” up to 4” X 3” ports
• Flows up to 900 GPM and heads up to 172’
• Cast iron and bronze materials available
• Some models available with double grease seal
• Discharge port can be moved in 90° increments
• Open and enclosed impellers
Series Applications
•
•
•
•
•
•
•
•
•
Cooling towers
Chillers
Washers
Water boosting
Potable water
Machine coolant
HVAC
Scrubbers
Filtration
• A little pump with a lot of value!
• Stainless steel pumps for lower flow transfer of
fluids from water to chemicals to petroleum.
• Available from ½” up to a 1 ¼ ” X 1” pump
• Patented ¾” self priming unit!
• AC, DC, and Hydraulic drives available
• ISO 8846 marine ignition proof motor available
• Self-primer lifts up to 12’
• Solves those small pump application needs!
FRX Applications
•
•
•
•
•
•
•
•
Circulating
Dispensing
Low volume transfer
DEF (Diesel Exhaust Fluid) – for bulk to tote,
tote to tote and small metering and dispensing
Marine a/c units
Bait well circulation
Ware wash
Marine hydraulics cooling
• The only pump you want to use for
transferring ANY type of fuel.
• Three distinct versions of self-priming and end
suction centrifugals.
• Extensive R & D to ensure proper materials
• Ductile iron
• Silicon carbide seals
• Optimal motor enclosures
• Versatility of our PumPak® option
• Close coupled with drives to 20 HP
• Space savings
• Price advantage
• Economical alternative for today’s petroleum
market place
• Curves written specifically for petroleum
products
• Made in the USA
Petroleum pumps – Compatibility labels
Compatibility label for
PO/SO units.
Compatibility label for
PG/SG units.
Compatibility label for
PE/SE units
Petrolmaxx Applications
•
•
•
•
•
•
•
•
Bulk transfer
Rail car loading & unloading
Barge loading and unloading
Locomotive refueling
Aircraft fuel transfer
Military vehicles refueling
Fuel transport trailers
Agriculture fuel carts
High Head / Low Flow Series
• Designed for fire suppression, this pump offers
higher head pressures; over 200’ for a 2” X 2”
pump.
• 1 ½” and 2” models in cast iron or bronze
• Close coupled, pedestal, engine, and hydraulic
drive options
• ABS type approval for marine operations
• Meets USCG 46 CFR requirements
• HHLF “High Output” is here!!
HHLF “HIGH OUTPUT”
HHLF Applications
•
•
•
•
•
Fire Control
High head applications over 200’
Mine dust control
Wash down for barns, ships, etc.
Bilge pump
Hot Oil Pump
• Cost leader vs. competition
• Close coupled, compact size requires less space
than competition
• Application temperatures up to 650°F
• Seal cavity temperatures of <350°F
• No cooling water needed, reduces auxiliary
equipment, and opportunity for oil/water mixing
• Impeller is closer to supporting bearing
• Less heat transferred out of the system; less
energy required to be replaced
Tempuflo Applications
• Heat transfer heat exchangers
• Circulate hot oil thru:
• tanks
• presses and platens
• molds
• mixers
• dryers
• Line tracing applications
• Fryers in the food industry
• Airplane deicing
Self-Priming Trash Pump
•
•
•
•
•
•
Let MP take out the trash!
Available in 2” and 3” NPT sizes
Close coupled or pedestal designs
Passes solids up 1 ½”
Hydraulic drive option for 3” model
Back pull out design and front clean out make
for ease of maintenance.
• 2 and 3 blade impeller designs to maximize
pump performance.
2CT Applications
•
•
•
•
•
•
Dewatering
Waste water treatment
Machine coolant
Fish farms
Filtration
Sumps
• For years MP Pumps has been a major provider
of pumps used in the transportation industry.
• Function as coolant booster and circulation
pumps
• Four distinct models: FRX, ILX, SBX, MDX
• Brushed and brushless DC motors
• Sold primarily through our network of
transportation distributors and OEM customers
• Flows up to 25 GPM and head ratings of up to
20’
Circulator Applications
•
•
•
•
•
•
Metro buses
School buses
Motor homes
Airport shuttles
Limousines
Line stripping trucks
Submersible Series
• Hook up the hydraulic lines, drop it in creek or pit
and let it run!
• Available in 2”, 2 ½”, and 3” discharge ports.
• Various size hydraulic motors for optimal
performance
• Cast aluminum body = light weight
• Will pass “pea gravel” sized particles
• Also available with a screw impeller for more
viscous applications like drillers mud.
Hydrasub Applications
•
•
•
•
•
•
Electric submersibles an issue?
Hydraulics available?
Mines
Industrial plants
Manholes
Remote locations w/no electric service
• hydraulics available from a truck or tractor
• flooded fields or ditches
• Condensate pits too hot for electric motors
S700 / BASE ASSEMBLY
Base assembly components
COUPLING GUARD
COUPLING (NOT SHOWN)
COUPLING GUARD
MOTOR RISER
RING GUARD
(OSHA COMPLIANT)
PEDESTAL RISER
GUARD RISER
BASE
(# 7 GAGE COLD ROLL STL)
What are we talking about?
MP Pump Abbreviations
Pump model and size
MP part #
Pump or Pumpak
Any
additional
features
21339 FM8 PMP C: PED 5.0 ??? ??? ??
Housing material
of construction
Impeller diameter
How the pump is driven
What are we talking about?
MP Pump Abbreviations cont.
• A full abbreviation list can be found on the MP
Pumps web site under the pricing link.
• As always, you can call our customer service
department with any questions on description
and they will be happy to help.
Web Site
• Main web site:
– http://www.mppumps.com
• Product catalogs
• Sales brochures
• I.O.M. manuals
• Pricing
• Parts lists
• Abbreviation list
Webinar series continues
• Coming in July 2012 will be our fourth webinar
dedicated to our HHLF product line.
• We will be excited to share our new “HHLF-HO”,
the high output HHLF!
• Please remember to check out our website at
www.mppumps.com