Transcript Slide 1

We don’t just go with the flow, we create it.
Introduction to Chemflo and FRX
• Do your customers use 316 SS end suction centrifugal
pumps?
• Do you need an answer to high priced 316 SS units?
• Do your customers need a better option than a stamped
stainless steel pump?
• Are lead times hurting your sales efforts?
• Would you like to capture that 316SS pump business?
• Then MP Pumps Chemflo and FRX pumps may be your
answer!!
• Two of our fastest growing lines at MP Pumps
Product Description
• Chemflo pumps are 316 SS investment cast pumps
• Developed to be a high quality, cost effective presence
for MP Pumps in the stainless steel pump market
• Broken into two groups
– Small Chemflo’s (CF 1-4)
• 5 HP or less, small motor frames
• NPT threaded connections
– Large Chemflo’s (CF 5-9)
• 5 HP up to 40 HP, larger motor frames
• ANSI 150 class flat flange connections
Product Description
• Flows up to 450 gpm and head up to 460’
• Many standard and optional features such as
– Wide range of mechanical seals
– Pedestal, close coupled, or Pumpak®
– Multiple drive options available
– Cast bosses for flush ports
• Numerous applications throughout the industrial,
agricultural, marine, commercial, and OEM markets
• Excellent option for the customer looking to upgrade to a
investment cast 316 SS pump
Small Chemflo family
• Small Chemflo pumps (CF 1-4)
• Sizes
– 1.5” x 1” (CF 1-2)
– 2” x 1.5” (CF 3-4)
• Available in several drive and mounting configurations
– Pedestal mounted
– PumPak®
• Close coupled to
– Electric motors
– Hydraulic motor (.22 and .37 cu. in.)
Small Chemflo family
• Flows up to 200 gpm and head up to 128’
– CF3 pump has a “High Flow” impeller
• Enclosed impellers are being evaluated
• And the small Chemflo pumps are available in…
– Nickel Bronze Aluminum (NiBrAl) CA958 material
– CFB 1 thru 4
– Same investment cast quality product
– Excellent choice for warm seawater applications
– Desalination units
– Sales brochures on our website for CFB pumps
Small Chemflo family
•
•
•
•
•
•
•
•
•
No thin wall stampings or welds
NPT threaded connections
Open impellers
Drive sleeve design
T-2100 mechanical seals
– Carbon/Ceramic/Viton
Seal flush connections optional
C-face to 56C and 145TC motors
56C frame motors do not need a base
145TC frame motors require a base
Large Chemflo family
• Large Chemflo pumps (CF 5-9)
• Sizes
– 2” x 1.5” (CF5)
– 3” x 2” (CF6)
– 2” x 1” x 8” (CF7)
– 3” x 1.5” (CF8)
– 2” x 1” x 10” (CF9)
• Available in several drive and mounting configurations
– Pedestal mounted
– PumPak®
• Close coupled to
– Electric motors
– Hydraulic motors (1.16 and 1.59 cu.in.)
Large Chemflo family
• Flows up to 450 gpm and head up to 460’
• ANSI 150 class flat flanges
• Enclosed impeller
• Seal flush connections optional
• Type 2100 mechanical seal
• Carbon/Ceramic/Viton
Large Chemflo family
• Drive sleeve design
• C-faced to 145TC thru 286TSC
• Hydraulic driven units in CF 5-8
• Engine drive available for CF 5/6
• Bearing housings have cast feet
• All close coupled units require motor base
Chemflo Applications
• Pharmaceutical
• Chemical transfer
• DEF (Diesel Exhaust Fluid) – for larger volume transfer
in stationary bulk transfer applications
• Potable water
• Deicing – spraying salt brine on roads or landing strips
for pretreatment
• Desalination
• Breweries
• Produced water
Fractional Horsepower 316 SS Pumps
• A little pump with a lot of value!
• Stainless steel pumps for lower flow transfer of fluids
from water to chemicals to petroleum.
• Four sizes available
•
½”, ¾”, 1”, and 1-¼”x 1”
• Patented ¾” self priming unit!
Fractional Horsepower 316 SS Pumps
• AC, DC, and Hydraulic drives available
• Various seal options available
• ISO 8846 marine ignition proof motor available
• Flows up to 74 gpm and head up to 87’
• Solves those small pump application needs!
FRX 75-SP ¾” Self-Priming pump
•
•
•
•
•
•
•
•
•
•
The FRX 75-SP
Patented ¾” self priming unit!
Self-primer lifts up to 12’
AC, DC, and Hydraulic drives available
ISO 8846 marine ignition proof motor available
12 and 24VDC
115 and 230 VAC
.08 cu. in. hydraulic motor
Flows up to 21 gpm and 28’ of head with electric motor
Flows up to 30 gpm and 21 psi with hydraulic motor
FRX 75-SP ¾” Self-Priming pump
Fractional Horsepower 316 SS Pumps
• FRX 50 and FRX 75 available with DC motors
• FRX 50 has ½” NPT or 1” Hose connections
• FRX 50 and FRX 75 utilize open impellers
• FRX 100 and 125 impellers can be trimmed
• FRX 125 has High Flow impeller
Fractional Horsepower 316 SS Pumps
• Pump discharge can be vertical or horizontal
• We continually strive to grow and offer new products
• In the future, FRX 100 with DC electric motor
• Looking for applications and interest in this product
• Newly released additions to the FRX line…
Introducing…
• The FRX 75H (Hose)
FRX 75H details
•
•
•
•
•
•
•
•
•
316 SS investment castings
1” hose connections
Carbon/Ceramic/Viton mechanical seal
Same performance as the standard FRX 75
Drive options available:
115 VAC ODP and TENV
230 VAC TENV
12V, 24V, and 32VDC
FRX 75 H 1" x 1" Hose Connection End Suction
Centrifugal Pump
Introducing…
• The FRX 75P (PPS)
FRX 75P details
•
•
•
•
•
•
•
•
•
•
Polyphenylene Sulfide material housing and cover
316 SS impeller
1” hose connections
Carbon/Ceramic/Viton mechanical seal
Same performance as the standard FRX 75
Drive options available:
115 VAC ODP and TENV
230 VAC TENV
12V, 24V, and 32VDC
FRX 75 P 1" x 1" Hose Connection End Suction
Centrifugal Pump
FRX Dual rated motor
•
•
•
•
•
•
•
1/6 HP, 1ph, 115/230V, 50/60Hz
Preset to low voltage setting
18” cable and 115V plug
Easily switched to 230V
Switch inside of conduit box
Remove low voltage plug
Adds to versatility of FRX 75
FRX Applications
•
•
•
•
•
•
•
•
•
•
•
Circulating
Dispensing
Low volume transfer
DEF (Diesel Exhaust Fluid) – for bulk to tote, tote to tote
and small metering and dispensing
Marine A/C units
Bait well circulation
Warewash
Marine hydraulics cooling
Agricultural
Saltwater brine de-icing
Heat tracing
What is the sell?
• High quality investment cast 316 SS pumps
• Versatility of the Pumpak® option
• Pricing, Pricing, Pricing!!!!
• Feedback from distributors is extremely positive!
• Generally lead times are 2 to 3 weeks A.R.O.
• Large amount of in stock spare parts
Webinar Series Continues
• We will be continuing our webinar series later
this summer.
• We are interested in your feedback on webinar
subjects that you would like to see.
• Contact us with your ideas.
• Check out our website, www.mppumps.com