9010 / 9020 Controller - MSA
Download
Report
Transcript 9010 / 9020 Controller - MSA
9010 / 9020
Controller
EVERY LIFE HAS A PURPOSE…
9010 / 9020 Controller
9010 / 9020 Controller
Target Markets
General Industry
Oil, Gas &
Petrochemical
Water & Wastewater
LPG
9010 / 9020 Control Card
9010
Single Channel Control Card
Factory Configured
9020
Dual Channel Control Card
Factory Configured
9010 / 9020 Controller
Control Module Features
Operates with complete range of
2- or 3-wire gas sensors including:
Toxic
Combustible
Oxygen
User-friendly configurable operation
Leading edge SMD technology throughout
9010 / 9020 Controller
Control Module Features
Provides real-time self-diagnostics
Each module comes with an independent AC/DC
power supply transformer
AC/DC automatic switching in case of
AC power failure
User defined access codes prevent accidental or
undesired tampering
9010 / 9020 Controller
Control Module Features
Each module has two SPDT relays with change-over
contacts for verification of Warning and Alarm
conditions
Default and configuration data
stored in non-volatile memory
3 Adjustable Alarm levels for Caution, Warning &
Alarm (indicated by LED’s)
9010 / 9020 Display Features
4-digit back-lit LCD
Choice of unit of
measure
(LEL, LELm, PPM, %
Vol, g/m3 or blank)
Alarm status
Cal, Time-out / Off, CWA
Delay ON, Alarm inhibit
9010 / 9020 Keypad Features
Simple 3-key operation
Keypad allows for:
Configuration
Calibration
Routine operation
▲
▼
9010 / 9020 Output Signals
Analog (normal) - 0-20, 4-20 mA (selectable)
isolated
Analog (fault) - 0,2,4,20 mA / frozen (selectable)
RS 485 for connection to a printer
9010 / 9020 Controller
Configuration and Calibration
No tools required for adjustment
Utilizes keypad
Remote non-intrusive calibrator
Adjustable Calibration Timer
Reminds user of selected calibration interval
User selectable 0-999 days
CAL message appears on display
9020 Component Side View
9010 / 9020 Enclosures
General Purpose Plastic
Protection against dust and
rain
1 – 9010 (1 point)
1 – 9020 (2 points)
4 lbs
9010 / 9020 Enclosures
Nema 4X Metal
Protection against
dust and rain
External Horn Acknowledge Button
5-10 – 9010
(up-to 10 points)
5-10 – 9020
(up-to 20 points)
67-100 lbs
Also Available in Stainless Steel
9010 / 9020 Enclosures
Explosion Proof Metal
Suitable for Class 1, Div. 1
& Div. 2 areas
1-2 – 9010
(up-to 2 points)
1-2 – 9020
(up-to 4 points)
52-86 lbs
9010 / 9020 Enclosures
Rack Mount
Standard Rack Configuration
Wiring in rear
10 – 9010 (up-to 10 points)
10 – 9020 (up-to 20 points)
23 lbs
9010 / 9020 Sensor Options
Passive catalytic sensor
Electrochemical sensor
Infrared sensor (via specific interface PCB)
Ultima® X Transmitters
FlameGard® 5 Flame Detectors
Ultima® MOS-5 Gas Detector
Ultima® OPIR-5 Open Path Gas Monitor
9010 / 9020 Controller