Transcript Powerpoint templates (products + priorities / behaviors

Automation - End User Solutions
Quality & Customer
TSX C USB FIP
USB Fipway offer, installation
configuration
and
Quality • Excellence • Support
Automation
End User Solutions
TSX C USB FIP Communication Adapter
Offer Description
 A TSXCUSBFIP adapter with its USB connection
 An installation guide
But to use the adapter the following items are required :
 A TSXFPCG010 or TSXFPCG030

To be ordered separately.
 A Fipway driver.

Included in the CD driver (ref : TLXCDDRV20M V2.5 or higher). you can
download it from the Telemecanique web site (www.telemecanique.com)
Division - Name - Date - Language
2
Quality • Excellence • Support
Automation
End User Solutions
TSX C USB FIP Communication Adapter
Offer Description bis
But that will not be enough other requirement regarding the Compatibilities exist.
 Schneider Software

Unity V3.1 or Higher
 PL7 V4.5 SP4 or Higher
If you respect all these recommendations you will be able to :
 Fipway

Connect your PC to a remote PLC
– Upload or Download application
 Fipio / WorldFip

Division - Name - Date - Language
Connect your PC to a remote PLC
– Upload or Download application
3
Quality • Excellence • Support
Automation
End User Solutions
TSX C USB FIP Communication Adapter
How to install it
 Install the Fipway driver. (The driver must be install before connecting the adapter)
 Insert the USB cable from the adapter into the USB port on your PC

The USB and ERR LEDs will light
 Messages will pop up
“Found New Hardware”
“Welcome to the Found New Hardware Wizard” window will open.
Select “No, Not this time” and click Next
Select Install the software automatically and click Next
Click Finish
If this is the first time the adapter has been plugged into the system; the “Found New
Hardward” message will pop up again and you will have to repeat all steps above.
The last message should be “New Hardware is ready to use”
.
Division - Name - Date - Language
4
Automation
Quality • Excellence • Support
End User Solutions
TSX C USB FIP Communication Adapter
How to configure it
 Open Schneider Drivers Manager

Select the USB-FIP Driver
 Configure the Fipway or Fipio Networks Parameters
(We can configure two adapters on one PC, UFP01 / UFP02)
Division - Name - Date - Language
5