Transcript Slide 1

Temporary C/M for Water dripping in 310 DC
Apply instant bonding glue(
Quick fix,Anabond etc) across
the strip
Paste the strip on rib( located below the
evaporator) and press it
After pasting the Strip water falling from
evaporator falls chiller tray and no splashing
on ref compartment
Applicomp, Bangalore
Permanent C/M for Water dripping in 310 DC
Topic : Water Dripping in Ref compartment – 310 DC
Description : Modification of rib below Evaporator to ensure water drips in Chiller tray during defrost
Previous condition
Chiller tray
Improved condition
Water falling
from rib in
chiller tray edge
and splashing
Rib Width – 39 mm
Backlogs:
39mm
Chiller tray
Rib Width increased
to 52 mm
Water falling
inside chiller tray
& no splashing
out side
52 mm
Person Name:
Gururaj
Department:
Production
Area:
Vacuum
Forming
Enrichments:
Quality
1. Water drops from rib falling near edge 1. Rib width increased to 52 mm
2. During defrost water drops falling
of the chiller tray.
inside chiller tray
2. In some sets water drops splashing out
3. There is no splashing of water drops in
side chiller tray and falling in ref
ref compartment
compartment
Continual Improvement Process
Date :
07/06/14
Productivity
5S & 3R
Cost
Safety
Others
Applicomp, Bangalore
√