Housing quality standards - DuPage Housing Authority

Download Report

Transcript Housing quality standards - DuPage Housing Authority

DuPage Housing Authority
711 East Roosevelt Road Wheaton, IL 60187
PH: 630-690-3555 FAX: 630-690-0702
HOUSING AUTHORITY GOAL
“To provide decent, safe, sanitary
and affordable housing.”
Housing Quality Standards
CITIES INSPECTED
DHA inspects units for close to 3,500 families covering over 50 cities
throughout DuPage, Kendall, Kane and Grundy Counties. We
perform inspections for DuPage Housing Authority, Kendall Housing
Authority, Rental Housing Support Program and Ogden Manor.
HOUSING QUALITY STANDARDS GENERAL
REQUIREMENTS
H.Q.S. consists of (13) performance requirements:
1.
Sanitary facilities
7. Interior air quality
2.
Food preparation and refuse disposal
8. Water supply
3.
Space and security
4.
Thermal environment
5.
Illumination and electricity
6.
Structure and materials
9. Lead-based paint
10. Access
11. Site and neighborhood
12. Sanitary conditions
13. Smoke and Carbon Monoxide
detectors
INSPECTION TYPES:
- Initial
- Annual
- Re-inspection
- Special
- Quality Control
INITIAL INSPECTION PROCESS
(NEW MOVE)
• LL/ Owner submits completed RFTA packet
• RFTA (move packet) is processed and approved
• Packet is forwarded to inspection department where a date for inspection is scheduled
• Inspection is completed. If unit fails, landlord will be notified of fail items.
• Once unit passes, rent portions will be provided by Leasing and Contracts department.
• Landlord notifies Leasing and Contracts department once keys have been physically
issued to tenant.
• Contract and Leasing department generates H.A.P. contract once all paperwork is verified
for appropriate dates, initials, and signatures
• Housing Assistance Payments are released to landlord once Contracts are executed
• The timeframe from receipt of RFTA packet at front desk to date inspection is performed
is targeted at10 business days. Possible causes for delay can include: processing delays
due to missing paperwork, delays due to rent negotiations and unit not being ready for
inspection.
INITIAL INSPECTION
•
Also known as “move-in” inspection.
•
Unit is checked for HQS compliance.
•
Picture documentation is taken of rooms throughout the unit.
•
Rent reasonableness certification is reviewed and confirmed
at time of inspection.
•
Review is made to ensure that certification is accurate based
on current unit condition.
•
Upon completion of inspection landlord/owner is provided
pass/ fail letter with results.
•
If fails inspection landlord has 7 days to make repairs unless
they are extensive and require more time.
•
If unit passes inspection the packet along with a copy of the
Yardi inspection pass letter is forwarded to Leasing and
Contracts department.
ANNUAL INSPECTION
• Annual inspections are performed according to H.U.D. guidelines within 364 days of
the previous annual inspection. Annual inspections are currently being scheduled 4560 days ahead of the previous years inspection. Tenants are usually provided at least
2 weeks notice prior to inspection. The annual inspection is a basic inspection to
determine unit suitability.
• If any deficiencies are found the inspector will determine if it is a 24 hour or 20 day
violation. Inspector will also determine who is responsible.
• If the unit fails inspection or there are recommendations, letters with descriptions of
required repairs and responsible party will be mailed to tenant and landlord.
• If unit passes inspection a letter will only be included on file, it will not be mailed to
either party unless requested. All inspection results and information will be
available on the tenant/ landlord portal.
SPECIAL INSPECTION
Special inspections can be requested by the landlord, tenant or a third party. The
request for a special inspection can be anonymous. Inspectors will asses concerns and
determine if unit is H.Q.S. compliant. The same timeframes apply as annual inspections
if the unit fails, 24 hour and 20 day violations.
REINSPECTION
• A re-inspection is performed following a failed inspection.
• For an initial (move in) inspection we schedule re-inspection once we have been
notified that the repairs have been completed. In this case repairs must be
completed within 7 days of the failed inspection. If re-inspected and it is confirmed
that repairs are not completed as required than we may cancel the RFTA packet and
tenant will have to locate another suitable unit.
• For annual and special inspections a re-inspection is scheduled 20-30 days after unit
has failed inspection.
• For all other inspections, failure to pass at the time of reinspection will initiate the
abatement/ termination process.
QUALITY CONTROL INSPECTIONS
• Quality Control inspections are performed to ensure that inspections are being
completed as required by H.U.D. guidelines.
• Qualified personnel will schedule and perform these inspections.
• Inspections must be performed on every inspector, and cover a cross section of cities
on units that had an annual, special, and initial inspection within the last 90 days.
VIOLATION TYPES
• 20 day violations
Examples: Missing handrail, stove burner not working, leak in plumbing, missing bedroom
detector.
• 24 hour violations
Examples: Gas leak, no working smoke detectors present, absence of functioning toilet,
utilities not in service, presence of severe mold, obstacles that prevent safe entrance or exit
from unit.
COMMON FAIL CONDITIONS:
 Missing or non-functional smoke/carbon monoxide detectors
 No handrails where required
 Cracked or broken window panes
 Inoperable stove burners
 Inoperable bathroom fans or lack of ventilation in bathroom
 Water leaks from faucets/pipes
 No temperature/pressure relief valves on water heaters
 Tripping hazards by installed floor coverings
ABATEMENT AND TERMINATION
• Abatement of subsidies is defined as: holding of payments and deducting payments for every day that the
repairs are not complete, beginning the day after repairs were due until the date the repairs were
completed and re-inspected. Termination of contracts will follow if repairs continue to be in a fail status.
• If unit fails, written notice will be provided and repair due dates will be issued. If repairs are not
completed by due date and tenant is responsible they will be placed up for termination. If repairs are
landlord responsibility they will be provided with abatement/ termination notification.
• Once the abatement/ termination process has been initiated the inspector will notify the Housing
Specialist via email, attach copies of letters and make any necessary memos.
• The Housing Specialists then enters a new DLE (date lease ends) into system and changes tenant status
from “Current” to “Notice”. Tenant should be provided a move (RFTA) packet.
• Abatement ends if repairs are confirmed prior to termination date. Letters are mailed to landlord. and
Housing Specialist is notified via email.
• Termination will be rescinded if repairs are completed prior to termination date, unless tenant has had a
new RFTA packet processed and it has reached inspection department.
• If the termination is rescinded the Housing Specialists then changes system dates back to reflect original
status prior to abatement/ termination notification.
RESPONSIBILITIES OF THE HOUSING
AGENCY:
• Ensure that all units on program meet Housing Quality Standards
• Encourage tenants and owners to maintain unit up to standards
• Schedule inspections in response to tenant or owner complaint or request
• Schedule annual inspection of the unit to ensure unit is still in compliance with
Housing Quality Standards
• Monitor and enforce the following SEMAP indicators: #2 Rent Reasonableness, #5
HQS Quality Control, #6 HQS Enforcement, #11 Pre-contract Inspections and #12
Annual HQS Inspection
• Submitting all annual inspection data to the “PIC” database.
• Generate and monitor weekly reports that include inspections with fail status, missed
inspections, abatement tracking/follow up and trend watching.
RESPONSIBILITIES OF THE TENANT:
• Live up to the terms of the lease
• Keep the unit safe and sanitary
• Cooperate with the owner by informing him or her of any necessary repairs
• Cooperate with the HA for inspections.
RESPONSIBILITIES OF THE OWNER:
• Comply with the terms of the lease
• Maintain the unit and keep it up to Housing Quality Standards
• Cooperate with tenants by responding promptly to requests for needed repairs
• Cooperate with the HA for inspections, including making necessary repairs
NEW TO DHA
• New Landlord portal allows for quicker access to inspection results, dates, letters,
and abatement status as well as all related attachments.
• Inspections are performed on IPAD allowing for live results as soon as 15 minutes
after inspection is completed through Yardi portal.
• Resources available on Landlord and Tenant portals which include; Lead Based Paint
pamphlet, “Good Place to Live” booklet, Inspection self-checklist and we will be
adding new resources in the near future.
ACCESSING INSPECTION INFORMATION
Enter Owner portal via dupagehousing.org
Under Landlords tab select “ Landlord Information Portal”
Select “Owner Portal”
Register or if already registered enter Username and
Password.
• If you are registering for first time you can obtain your
Vendor code by contacting the Housing Authority
•
•
•
•
LANDLORDS SUCCESS CIRCLE
Prepare unit for
Inspection
Keeps units
occupied
Complies with
Housing Assistance
Payment contract
Maintains unit
Enforces leases
INSPECTORS
• Mario Carrasco- HCV Program Manager of Inspections Ext. 207
• Randy Ridgeway- HCV Inspector Ext. 206
• Dan Moore- HCV Inspector Ext. 228
• Jerry Lowman- HCV Inspector Ext. 227
• Shaquille Artis- HCV Inspector Ext. 217