DATA CENTER SERVICES
Download
Report
Transcript DATA CENTER SERVICES
CMS
CMS Data Services is Your
TOTAL SOLUTION
COMPANY
DATA CENTER SERVICES
& PRODUCTS
Why Should You Clean Your Data
Center?
Dirt, dust, carbon, construction debris, calcium
carbonate, paper dust, synthetic fibers, human and nonhuman organic fibers and other un-seen sources of
contamination are leading causes of internal corrosion
and equipment malfunction in today’s computer systems.
Manufacturer’s Quotes
Fuji Film: regarding high performance magnetic particles and a magnetic layer .2um
thick ATOMM-II technology, “Even with a special black coating to keep the friction
coefficient consistently low, there is friction. Friction product equals metal particles
that get airborne and move through mission-critical systems”.
IBM states in their systems support manual: “Many failures are caused by dirt and
fiber particles, which pick up a minute electrical (static) charge and attach to the
recording head surfaces…Hardware and application maintenance is critical to keep
your systems running at peak performance. Unplanned interruptions shouldn’t impact
your business”.
HP acknowledges that during recent years a growing concern has developed in
computer rooms where conductive contaminates (metallic particulate contamination)
are formed on the bottom of some raised floor tiles. HP recommendation: “…your site
be evaluated for metallic particulate contamination before installation of electronic
equipment since metallic contamination can cause permanent or intermittent failures
on your electronic equipment”.
The CMS Solution
CMS Data Services has a
national network of operations
managers and technicians who
specialize in data center
cleaning.
Data Center Cleaning Services
we offer:
Environmental Analysis
(airborne particulate testing,
ferrous metal tests,
concrete seal integrity, etc.)
Sub-floor Cleaning
Equipment Cleaning
Floor Surface Cleaning
Concrete Seal
Disaster Recovery
Zinc Whisker Testing and
Abatement
Subfloor Cooling & Airflow
Air stratification
efficiency requires a
balanced airflow
Maximizing data center
cooling efficiency
through Cooling
Capacity Balancing
Two keys to increased
cooling capacity
Balanced airflow
Managed airflow
Managed airflow
(Eliminating unmanaged
openings)
Lost air from ‘cable cut
outs’ create a short circuit
of airflow. (Air that returns
to the ‘Computer Room
Air Conditioner’ without
passing through a heat
load)
A great deal of Airflow
can be recouped and
redirected to the thermal
load by covering these
openings
High velocity air flow
High air velocity creates
harmful airflow patterns
that negatively affect air
pressures.
Perforated tiles located at
places where there is
improper airflow velocity
will cause the perforated
tile not to flow to its fullest
potential.
How does inefficient
subfloor air delivery
affect you?
Makes for
inefficient
Cooling
capacity
Overall air
stratification
Uncontrolled subfloor air
velocity hurts cooling
capacity
Which causes:
Inefficient thermal load
removal
Hot spots
Cool air not to reach
equipment on high racks
Not fully populating
equipment racks
Limits placement of
equipment on all areas of
the floor
Energy to be wasted
AIR PLUMES
Insufficient airflow from
the perforated tiles hurts
air stratification
Stratification requires
both high CFM and
balanced volume of
airflow to the thermal
load
Until now subfloor velocity
has been totally
overlooked…
NOW there is a system to
eliminate problems due to
airflow velocity
The Solution:
1. Engineer subfloor
airflow solutions with
Computer Fluid
Dynamics (CFD)
2. Adjust the subfloor
airflow velocity to
enable perforated tiles
to maximize their airflow
3. Eliminate cable cut out
short circuits
4. Provide continuous
engineering support for
continued airflow
management
Before and after example
Low and Uneven Airflow
High and Even Airflow
Perforated tile
comparison
before and after subfloor
Low Velocity – High Velocity
Next step
Build a Computer Fluid Dynamics (CFD) of
your data center (complete with airbalancing analysis)
Compare side-to-side with engineered
solution
Analyze the energy savings
Computational Fluid
Dynamics (CFD)
What We Need…
•Plenum height
•Location and flow rate of CRAC
•Perforated tile arrangement
•Cable cut-out openings
•Under floor obstructions
What We Deliver
We provide quick, reliable, and
cost-effective solutions to
computer cooling needs by first
calculating the airflow rates
based on the current
configuration of your data
center; then engineer a solution
with our program.
Finally, we will offer you a sideby-side comparison.
CMS
Relocation Services
Our data center relocation services include:
Conducting a complete inventory of assets
Monitoring asset movement
Selecting qualified contractors
Implanting security measurements
Minimizing potential downtime by identifying and analyzing potential
risks
Ensuring that transportation can handle capacity
Checking connectivity requirements at the new location
Ensuring quality cabling methods
Assist IT department in network connectivity issues
CMS
Access Floor Panels
(Parts & Installation)
New Floor Panels
Replacement Parts
Used Floor Panels
Floor
Adjustment/Leveling
Complete
Construction
Remodeling
Zinc Whisker
Abatement
CMS
Contamination
Audits/Lab Services
CMS Data Services
provides a full range
of inspection and
testing services to
identify contaminants
and soil, verify the
source, and offer
solutions to fix the
problem.
CMS
Environmental and
Security Monitoring
Systems
What do you want to monitor – we have
the solution!
Temperature
Water
Humidity
Smoke
Security Concerns
Our solutions monitor environmental and equipment
parameters at remote and/or critical sites. No external
PC or software is required for it to function. Contact us
for specific information.
CMS
Inventory and Audit
Services
70% of organizations have a 30% discrepancy between a planned
inventory and their actual inventory.
Major reasons to conduct an inventory
Planning and orchestrating moves
Leverage pre and post-merger and acquisition activities
IT Help desk – asset database reset
Maximize liquidation and dispositions
Lease verification and tracking
Software licensing compliance
Audit and regulatory issues
Whether your company is large or small, sooner or later you will need to
update your master list of IT Assets. Call on CMS Data Services to
ensure consistent and accurate data capture.
CMS
Additional Services
Power Audits
Cable Mining and Organization
Cleanroom Cleaning and Maintenance
Disaster Recovery
Cleaning and Contamination Control Supplies:
Tacky mats, tile pullers (stand-up and regular),
cleaning solutions and supplies, staticdissipative v-belts for air-handlers, HEPA and
ULPA-filtered vacuums, filters for air-handlers,
cleanroom supplies.
CMS
Contact Us:
CMS Data Services
Mark Kempin
Direct: 973-317-2810
Cell: 201-532-6486
[email protected]
Your TOTAL SOLUTION COMPANY