Transcript Slide 1

United States
Version 4.0
National CAD Standard
Université St-Esprit de KASLIK – Faculté des Beaux Arts
National CAD Standard
Université St-Esprit de KASLIK – Faculté des Beaux Arts
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
Version 4.0
United States
Version 4.0
National CAD Standard
Université St-Esprit de KASLIK – Faculté des Beaux Arts
Presented by:
Roland Aboujaoude
[ARCHITECT],
[USEK]
[Nov 2011]
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
United States
Who Should Care
about the NCS?
• Architects
• Engineers (all
types)
• Facility Managers
• Owners
• Specifiers
• Draftspeople
• Students
• Academic Faculty
**
HOW STANDARDS HELP
RELEVANCY
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
RELEVANCY
**
NCS BACKGROUND & CONCEPTS
NATIONAL CAD STANDARD™ CONCEPTS
WHAT IS
THE NCS?
• Interrelated tools,
guidelines and
standards for
drawings
• Specifies Graphic
Organization
• MasterFormat™,
PageFormat™ and
SectionFormat™
organize specs;
NCS organizes
drawings
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
• NCS is known as the “National Cad
Standards”
for
architecture,
engineering and construction; it is
called also “the standard”.
• NCS intent during the design phase
is to speed the transfer of information
between
owner,
designer,
consultants,
contractors
and
subcontractors.
• During construction, NCS intent is to
reduce time in finding and referencing
information between owner, designer,
consultants, products suppliers and
manufacturers.
Version 4.0
National CAD Standard
A Consensus Standard Incorporating Industry Publications
• NCS Scope of work:
• DataOrganization:
(Organize cad files) it addresses
issues such as layer name, discipline
designators, line weights, pen
assignments
and
the
graphic
organization of the construction
drawing sheets.
• Data exchange: Helps to guarantee
the future utility of today’s Cad data
files.
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
United States
National CAD Standard
A Consensus Standard Incorporating Industry Publications
COMPONENTS
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
Version 4.0
United States
Version 3.1
National CAD Standard
A Consensus Standard Incorporating Industry Publications
• Chapter 1: Layers:
• Discipline - Major group Minor Group – 2nd minor group
- status
• (Page 40 - ---)
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
United States
(mandatory)
AA - AAAA - AAAA - X
Major Group
(mandatory)
AA - AAAA - AAAA - X
One or Two Minor Groups
(optional)
AA - AAAA - AAAA - X
Status
(optional)
**
NCS: AIA CAD LAYER GUIDELINES
AIA CAD LAYER GUIDELINES OVERVIEW
AIA CAD
LAYER
GUIDELINES
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
AA - AAAA - AAAA - X
Discipline Designators
LEVEL 1 (MANDATORY)
LEVEL 2 (OPTIONAL)
G General
H Hazardous Materials
V Survey / Mapping
B Geotechnical
W Civil Works
C Civil
L Landscape
S Structural
A Architectural
I Interiors
Q Equipment
F Fire Protection
P Plumbing
D Process
M Mechanical
E Electrical
T Telecommunications
R Resource
X Other Disciplines
Z Contractor/Shop Drawings
O Operations
AI
**
AS
AD
CG
CP
SF
DP
EL
Architectural
Interiors
Architectural Site
Architectural
Demolition
Civil Grading
Civil Paving
Structural Framing
Process Piping
Electrical Lighting
NCS: AIA CAD LAYER GUIDELINES
DISCIPLINE DESIGNATORS
DESIGNATORS
• One or Two Alpha
Characters
• Mandatory
• Coordinated With
Drawing Set
Organization
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
DISCIPLINE
**
NCS: AIA CAD LAYER GUIDELINES
MAJOR GROUP DESIGNATORS
• Identifies: Major
Building Systems
or
• Drawing Views,
or,
• Annotations.
• Mandatory
• Coordinated With
Drawing Set
Organization
• User-defined
Major Groups are
NOT Permitted
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
Discipline: A - Architectural
ANNO - General Information
AREA - Area
BAGS - Baggage Handling Equipment
CLNG - Ceiling Information
COLS - Columns
DETL - Detail Information
DOOR - Doors
ELEV - Elevations
EQPM - Equipment
FLOR - Floor Information
GLAZ - Windows
LITE - Lights
PROP - Properties Information
ROOF - Roof Information
SECT - Sections
STAT - Demolition (used only in creating Existing
Demolition model files)
WALL - Walls
MAJOR GROUP
DESIGNATORS
FULL
PART
IDEN
PATT
Full Height
Partial
Identification
Pattern
• Differentiates a
Major Group
• One or Two Sets
of Four Characters
• Optional
• May be UserDefined: A-Z, 0-9, ~
**
NCS: AIA CAD LAYER GUIDELINES
MINOR GROUP DESIGNATORS
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
MINOR GROUP
DESIGNATORS
N
E
D
F
T
M
X
1-9
**
New work
Existing to remain
Existing to demolish
Future work
Temporary work
Items to be moved
Not in contract
Phase numbers
NCS: AIA CAD LAYER GUIDELINES
STATUS FIELD DESIGNATORS
• Differentiates
Construction Phase
or Type
• Optional
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
STATUS FIELD
DESIGNATORS
AA – N NN
DESIGNATORS
SHEET TYPE
0 General (symbols
legend, notes, etc.)
1 Plans (horizontal)
2 Elevations (vertical)
3 Sections (sectional,]
wall & stair)
4 Large Scale Views
5 Details
6 Schedules and
Diagrams
7 User Defined*
8 User Defined*
9 3D Representations
(isometrics,
perspectives,
photographs)
AA – N NN
SEQUENCE
01-99
**
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
SHEET TYPE ND SEQUENCE DESIGNATORS
• *User-Defined
Sheet Type
Designators May
NOT Fall in Another
Category
•Always Include 2digit Sequence
Designator
• Do NOT use “00”
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
SHEET TYPE
& SEQUENCE
Sheet Title
G - 001
C - 001
S - 101
A - 101
A - 201
A - 301
A - 601
P - 101
P - 601
M - 101
E - 101
E - 102
E - 501
Title Sheet
Notes and Symbols
Foundation Plan
Floor Plan
Exterior Elevations
Wall Sections
Door and Frame Schedule
Plumbing Site Plan
Plumbing Riser Diagram
HVAC Plan
Power Plan
Lighting Plan
Electrical Details
**
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
SHEET NAME EXAMPLES
DESIGNATORS
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
Sheet
SAMPLE
DRAWING
Sheet Title
CD-101
CG-101
LI-101
SF-101
SF-501
AS-101
AG-101
IN-601
ES-101
EP-101
EL-101
TI-101
Site Demolition Plan
Grading Plan
Landscape Irrigation Plan
Roof Framing Plan
Framing Details
Architectural Site Plan
Signage Plan
Interior Finish Schedules
Electrical Site Plan
Electrical Power Plan
Electrical Lighting Plan
Intercom Plan
**
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
SHEET NAME EXAMPLES
DESIGNATORS
• Hyphen Must
Follow Level-2
Discipline
Designator (NEW)
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
Sheet
SAMPLE
DRAWING
SHEET ORGANIZATION
SHEET ORGANIZATION: MODULE 2
**
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
MODULE 2
B
279 x 432 (11 x 17)
C
432 x 559 (17 x 22)
D
559 x 864 (22 x 34)
E
864 x 1118 (34 x 44)
TYPICAL USES
Project book; supplemental
drawings; mock-up sheets.
Supplemental drawings;
mock-up sheets.
Small projects in preferred
plan scale.
Projects in preferred plan
scale; government projects.
Large projects in preferred
plan scale; mapping & GIS.
NOT SHOWN:
A0-A4, A-F
**
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
COMMON SHEET SIZES
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
MARK SIZE mm (in)
A
216 x 279 (8.5 x 11)
COMMON
SHEET
SIZES
• Production Data
Area
• Drawing Area
• Title Block Area
SHEET LAYOUT AREAS
**
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
SHEET
LAYOUT
DATA AREA
• Production
Information:
•Production block
•File path
•Sheet file name
•Default settings
•Pen assignments
•Printer/ plotter
commands
•Overlay drafting
control data
•Reference file (s)
•Layers plotted
•Production hours
•Scanning scale
block
**
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
PRODUCTION DATA AREA
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
PRODUCTION
Contains:
•Keynotes
•Key plans
DRAWING AREA
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
DRAWING AREA
**
•Schedules
•Other graphic
Information
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
DRAWING
AREA
D
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
DRAWING AREA GRID
**
1
B
B
A
A
5
4
3
2
1
2
3
4
5
C
•Columns are
Numbers
C
D
• Divided into
Modules
•Rows are Letters
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
DRAWING
AREA
D
1
2
3
4
5
C
B
A
**
MODULE **
1
2
3
4
5
D
C
• A Drawing May
Comprise Several
Modules
B
• Use Module
Coordinates for ID
A
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
DRAWING AREA GRID MODULE
• Modules Identified
by Letter & Number
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
DRAWING
AREA
GRID
XXXX
XXX
XX
• Drawing Number
as Determined by
Coordinate
XX
XXXXX
XX
XXXX
XXXX
XXX
XXXXX
XXX
C4
**
XXXXXXXX XXXX XXXXXX
X:X
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
DRAWING NUMBER
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
DRAWING
AREA
AREA
Contains:
• Designer
• Project
• Issue Block
• Client/
Management
• Sheet Title
• Sheet ID
Information
**
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
TITLE BLOCK AREA
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
TITLE BLOCK
Vertical Text Format
AREA
Horizontal Text Format:
TITLE BLOCK TEXT ALIGNMENT
**
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
TITLE BLOCK
Contains:
• Name
• Address
• Telephone & Fax
• E-mail address
• Consultants
• Professional Seals
**
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
DESIGNER BLOCK COMPONENTS
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
DESIGNER
ID BLOCK
Contains:
• Project name
• Project address
• Building / facility
name
• Construction
phase sequence
• Project logo
**
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
PROJECT ID BLOCK COMPONENTS
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
PROJECT
ID BLOCK
Contains:
• Phase Issue
Dates
• Addendum issue
dates
• Clarification dates
• Revision issue
dates
**
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
ISSUE BLOCK COMPONENTS
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
ISSUE
BLOCK
BLOCK
Contains:
• Drawing
Preparer’s Project
Number
• CAD Drawing File
Number
• Drawn by
• Checked by
• Copyright
Always Horizontal,
Regardless of Text
Format.
**
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
MANAGEMENT BLOCK COMPONENTS
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
MANAGEMENT
BLOCKS
• Always Horizontal,
Regardless of Text
Format
SHEET TITLE AND SHEET ID BLOCKS
**
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
SHEET TITLE
SHEET ID
ROOM FINISH SCHEDULE
ROOM #
ROOM
NAME
FLOOR
BASE
WALL
CEILING
NOTES
101
ENTRY
VCT
RUBBER
PAINT
SAP
1
102
OFFICE
CPT
RUBBER
PAINT
SAP
2
SCHEDULES
**
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
SCHEDULES: MODULE 3
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
MODULE 3
DRAFTING CONVENTIONS
DRAFTING CONVENTIONS: MODULE 04
**
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
MODULE 04
CONVENTIONS
Includes:
DRAFTING CONVENTIONS
**
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
DRAFTING CONVENTIONS OVERVIEW
• Drawing
Orientation and
North Arrow
• Grid System
• Drawing Block
Format
• Drafting Layout
• Scale
• Lines
• Dimensions
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
DRAFTING
CONVENTIONS
Subjects Covered:
• Material
Indications
• Cross-Ref
• Symbols
• Drawing Types
DRAFTING CONVENTIONS
General
Plans
Elevations
Sections
Large Scale Views
Details
Schedules &
Diagrams
3-D
Representations
• Mock-Up
Drawing Set
**
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
DRAFTING CONVENTIONS OVERVIEW
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
DRAFTING
• Sides of Building
Parallel with Sheet
Edges
• Detail Orientation
Same as Floor Plan
**
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
ORIENTATION AND NORTH ARROW
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
ORIENTATION
& NORTH
ARROW
Fine
0.18
1.00
Thin
0.25
1.40
Extra Wide 0.70
LINE WIDTHS
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
**
0.50
Wide
2.00
Medium 0.35
LINE
WIDTHS
Line Width in mm
151
• Each Door Has
Unique ID
152A
• Door Number
Same as Room No.
STORAGE
STORAGE
151
152
**
152B
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
DOOR SYMBOLS
• Multiple Doors
Labeled with A-Z
(New NCS 4.0
Symbol)
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
EXAMPLE
DOOR SYMBOLS
**
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
EXAMPLE
DOOR SYMBOLS
**
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
EXAMPLE
Detail Designator
A-GRID-DIMS
A-ANNO-IDEN
Door TAG
WindowTAG
WALL SECTION
Example NCS Plan
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
SECTION
EXAMPLE
A-ANNO-TAG
A-GRID-IDEN
REFERENCE GRID INDICATORS
1
2
3
4
• Vertical Grid at
Top, Numbered
Left-Right
5
D
C
B
A
**
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
REFERENCE GRID INDICATORS
•Horizontal Grid on
Right, Alphabetized
Bottom-Top
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
REFERENCE
GRID
MARKS
• Consistent
Orientation
TERMINATOR MARKS
**
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
TERMINATOR
BLOCK FORMAT
Reference Grid &
Dimension Area
Graphic Notation
Area
XXXXX
XX
Margin
XXXXX
XXX
Title Area
Drawing Module
Lines
**
**
SECTION
X:X
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
DRAWING BLOCK FORMAT
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
DRAWING
BLOCK FORMAT
GRID
Reference Grid &
Dimension Area
XXXX
XX
XX
XXX
Graphic Notation
Area
XXXXX
XX
XXXX
XXXX
XXX
Margin
XXXXX
XXX
Title Area
Drawing Module
Lines
**
**
SECTION
X:X
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
DRAWING BLOCK COMPONENTS
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
DRAWING
Drawing Module
Lines
Drawing ID
Drawing Number
Drawing Title
Drawing Scale
North Arrow
**
**
SECTION
X:X
X
X
X
X
X
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
DRAWING BLOCK TITLE AREA
Graphic Scale
(Optional)
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
TITLE
AREA
GRID
XXXX
XXX
XX
XX
XXXXX
XX
XXXX
XXXX
XXX
XXXXX
XXX
**
**
SECTION
X:X
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
BENEFITS OF NCS
• Simplifies &
organizes
• Standardizes
placement of
drawing
components
• Standardizes
placement of
information for all
drawings
• Consistent
format for all
drawings
• Works with all
projects
regardless of size
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
BENEFITS
Locate FrequentlyUsed Drawing
Block Lowest, by
Title
Move Upward, to
Left
FIRST
FOURTH
SECOND
THIRD DRAWING
DRAWING
DRAWING
DRAWING
**
NOTE BLOCK
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
BLOCK LOCATION AND ORGANIZATION
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
BLOCK
LOCATION
TERMS & ABBREVIATIONS
TERMS AND ABBREVIATIONS: MODULE 05
**
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
MODULE 5
Includes:
• Preferred Terms
• Standard
Drawing
Abbreviations
• When to Use
Abbreviations
TERMS & ABBREVIATIONS
**
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
TERMS AND ABBREVIATIONS OVERVIEW
• Formats for
Abbreviations
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
MODULE 5
Provides:
• Consistent
Communication
• Consistent
Terms
• Notes on
Common Usage
and Non-Preferred
Terminology
TERMS & ABBREVIATIONS
**
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
TERMS AND ABBREVIATIONS OVERVIEW
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
MODULE 5
TERM QUIZ
Gypsum Wall
Board
Gypsum
Wallboard
Gypsum
Board
Sheet Rock
Drywall
Gypsum
Panel
**
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
PREFERRED TERM QUIZ: NAME THIS PRODUCT
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
PREFERRED
TERM QUIZ
CAULK
CAULKING
CALK
CALKING
SEALANT
PREFERRED TERM QUIZ: NAME THIS PRODUCT
**
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
PREFERRED
TERM QUIZ
CONCRETE
UNIT
MASONRY
CONCRETE
MASONRY
UNIT
CONCRETE
BLOCK
CINDER
BLOCK
CONCRETE
MASONRY
**
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
PREFERRED TERM QUIZ: NAME THIS PRODUCT
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
PREFERRED
TERM QUIZ
GROUND
FAULT
CIRCUIT
INTERRUPTER
GROUND
FAULT
INTERRUPTER
**
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
PREFERRED TERM QUIZ: NAME THIS PRODUCT
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
PREFERRED
ABBREVIATION
QUIZ
hdwr
hw.
Hdwr.
HDW.
hdw.
HDW
PREFERRED ABBREVIATION QUIZ: “HARDWARE”
**
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
PREFERRED
ABBREVIATION
QUIZ
el
EL
elev
ELEV
ELV
PREFERRED ABBREVIATION QUIZ: “ELEVATION”
**
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
PREFERRED
ABBREVIATION
QUIZ
CP
CONC PVMT
CPMT
PCCP
CONPVMT
Concrete Pavement
**
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
PREFERRED ABBREVIATION QUIZ: “CONCRETE PAVEMENT”
CCCP
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
PREFERRED
Invert Elevation
Catch Basin
Typical
Yes
EL
GYP BD
EQ
INV EL
CB
TYP
No
El
Gyp Bd
Eq
INV. EL.
C.B.
TYP.
If thr cn be any dbt / cnfsn abt
abbrv mnng, DN’T USE.
**
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
GENERAL ABBREVIATION RULES
•No Lower Case
•No Periods
•Don’t Abbreviate
Words Less than 5
letters long
•Avoid
Abbreviations
Where Possible
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
Word
Elevation
Gypsum Board
Equals
GENERAL
RULES
SYMBOLS
Includes:
• Symbol
Classifications
3
D2
A-512
2
**
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
SYMBOLS: MODULE 06
• Over 6,000
Graphic Symbol
Representations
• How Symbols are
Organized
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
MODULE 6
3
S
D2
A-512
**
‘‘‘
&
Sheet Keynote
at
Existing
Elevation
Disconnect
End Grain
Indicator
General
Sink
Switch
Plus or
@
SD
3
21 0 2
4
Reference
Symbols
EL 100
Line Symbols
VESTIBULE
Construction
Room
Identifier
+/-Storm
Minus
101
Drain
Lumber
Three-Way
Multiply by,
Square Table
X1-3w/Switch
byChairs
Armless
Finish
Wood
2
Hour
Fire
Detail
Indicator
Number,
Resistive
Round Catch
#Construction
CB
Pound
Basin StallGrid
Reference
Shower
o Indicator
EarthDegree(s)
x
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
TYPES OF SYMBOLS
Identity Symbols
Template Symbols
Material Symbols
Text Symbols
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
ERV-1
Foot (feet)
GraphicInch
Scales
(inches)
Exhaust
Left
Single
Brick
Bench
MarkRoof
Indicator
Vent Fan
Hinged
Door
and
SYMBOL
TYPES
ORGANIZATION
NEW in 3.1:
• Symbols Now
Organized by
MF2004
• Symbols SubOrganized by Type
**
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
SYMBOL ORGANIZATION
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
SYMBOL
X
“FACE BRICK”
X
09 65 00.G GYPSUM BOARD
“ROSEY RED BRICK BY
ACME BRICK COMPANY”
09 65 00.G GYPSUM
BOARD
X
14.97
14.97
NCS: CSI’S UNIFORM DRAWING SYSTEM (UDS)
NOTES GENERAL RULES
Use Brief, Generic
Language
Use Capitalized,
Sans serif,
Proportional,
Non-stylized Fonts
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
Use:
Instead of:
**
GENERAL
RULES
GUIDELINES
• Allow Consistent
B&W Printing from
Color Files
• Consistent Color
Mapping
• Allow CAD
Vendors to
Develop Color
Mapping
**
NCS: TRI-SERVICES PLOTTING GUIDELINES
PLOTTING GUIDELINES GENERAL PRINCIPLES
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
PLOTTING
GUIDELINES
EXAMPLE
**
NCS
Color #
Pen
Plotter
Pen mm
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
0.18
0.25
0.35
0.35
0.50
1.00
1.40
0.35
2.00
0.18
0.25
0.35
0.50
0.70
1.00
Laser/Elec
MicroStation MicroStation
Plot Color
InkJet in.
Color #
line weight
0.007
0.010
0.014
0.014
0.020
0.039
0.055
0.014
0.079
0.007
0.010
0.014
0.020
0.028
0.039
Black
Black
Black
Black
Black
Black
Black
Halftone
Black
Black
Black
Black
Black
Black
Black
3
4
2
7
1
5
0
9
14
10
19
27
35
43
51
0
1
2
2
3
7
10
2
15
0
1
2
3
5
7
AutoCad
Color #
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
NCS: TRI-SERVICES PLOTTING GUIDELINES
PLOTTING GUIDELINES EXAMPLE
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
PLOTTING
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a
© 2005. All rights reserved, including World rights & Electronic rights. U.S. copyright held by The Construction Specifications Institute. v07Mar05a