Transcript Q-1 Wased
Rules : 1) All India branches will be divided into four teams i.e. North (Delhi + Chd) / South (Hyd + Chn + Blr) /East (Kol + Gty +Bbr)/West (Mum + Vad + Ngr) 2) Each team will have four playing members, others will not be allowed to answer or help their respective teams. 3) 15 seconds will be given to answer for each question, if unanswered the same question will be passed on to audience. 4) Each question has tag money, for right answer you will get Rs. 200.00 and for wrong answer Rs. 200.00 will be deducted from your winning amount. 5) Members of Enginnering department & MARCOM will not be part of this Quiz. Arrange following Instrument’s (code wise) in increasing manner.. 1) G.A. Pressure meter 1) AIM-040 – Liquid Limit Device 2) Liquid Limit Device EO” 2) AIM-146 GA pressure meter 3) Pavement Core drilling Machine 3)AIM-442-1 Jaw Crusher 4) Jaw Crusher 4) AIM-551-1 Pavement Core Drilling Machine Q.1 AIMIL is ISO 9001 accredited organization since 1) 1999 2) 2000 3) 2000 4) 2004 Q.2 AIM-025 was developed by CSIR lab ________and licensed to Aimil…. 1) CRRI 2) CDRI 3) CBRI 4) CSMRS Q.3 The CRRI calibration charges of Bump Integrator is 1) 1 lac + Service tax 2) 90,000 + Sales tax 3) 90,000 + Service tax 4) 1 lac + Sales Tax 1) SCPT 2) SPT & DCPT 3) SCPT & DCPT 4) SPT & SCPT Q.5 Which Instrument can be used in sedimentation analysis of soil…. 1) AIM-055 2) AIM-046 & AIM-056-1 3) AIM-056-1 4) AIM-055 & AIM-057 Q.6 Vicat Apparatus is used to determine the consistency and setting time of…. 1) Concrete 2) Lime 3) Cement 4) Cement & Lime Q.7 Which Instrument is used to conduct accelerated soundness tests on cement….. 1) Le-chat mould 2) Autoclave 3) Shrinkage Bar Mould 4) All of the above Q.8 How many types of SCC flowability instrument AIMIL sell.. 1) Three 2) Four 3) Five 4) Six Q.9 How many types of Load Truss Aimil sell…. 1) FOUR 2) FIVE 3) THREE 4) TWO Q.10 How many types of CTM, Aimil manufacture 1) FIVE 2) THREE 3) FOUR 4) SEVEN Q.11 How many moulds Aimil supply with AIM-565-1 Ductility Test Apparatus……. 1) THREE 2) FOUR 3) TWO 4) Its optional… Q.12 How many “strain rate” available in our AIM-104 Direct Shear Apparatus…. 1) Twelve 2) Eighteen 3) Six 4) None of above Q.13 What is the platen speed range(mm/min.) of AIM-064-E “Load Frame Microprocessor based” 1) 0.00001 to 9.99999 2) 0.000001 to 9.999999 3) 0.001 to 9.999 4) 0.0001 to 9.9999 Q.14 According to IS:10890, High speed of planetary movement of paddle in AIM-412-4 is 1) 140+5 rpm 3) 125+5 rpm 2) 62+5 rpm 4) 280+5 rpm Q.15 The frequency range of AIM-418-2 Vibration machine is 1) 12000+500 rpm 2) 12000+400 rpm 3) 10000+300 rpm 4) 12000+100 rpm Q.16 What is the rpm of AIM-441 Ball Mill 5 kg 1) 24 2) 30 3) 48 4) 20 Q.17 Proving Ring capacity 2000 kN equals to 1) 2000 kgf 2) 200 kgf 3) 200000 kgf 4) None of the above Q.18 Which capacity of electronic balance is supplied with our AIM-9933….. 1) 15 kg x 0.5 g 2) 15 kg x 0.1 g 3) 15 kg x 1 g 4) 30 kg x 1 g Q.19 How much weight of rammer is required in Bitumen compactor for Modified Marshall test.. 1) 4.5 kg 2) 10.2 kg 3) 4.9 kg 4) 2.6 kg Q.20 In Asphalt content oven, the bitumen burnt at 1) 640 deg C 2) 525 deg C 3) 538 deg C 4) None of the above Q.21 AIM-344 Cube Mould 150 mm cube is ISI certified against ……. 1) IS 14085 2) IS 10086 3) IS 100086 4) IS 10080 Q.22 How much is the volume of AIM-113 Compaction Mould “Heavy” as per ASTM… 1) 3250 mm3 2) 2250 mm3 3) 2124 mm3 4) 2500 mm3 Q.23 How much abrasive charge is supplied with AIM-458-1 1) 10 kg 2) 15 kg 3) 5 kg 4) 20 kg Q.24 How many drill rods supply with AIM-135 Static Cone Penetrometer” 1) 15 2) 10 3) 30 4) 25 Q. 25 Identify the machine Q. 26 Identify the machine Q. 27 Identify this attachment of UTM….. Q. 28 Identify the machine Q. 29 Identify the machine Q. 30 Identify the machine :