Valor 1000W Launch Slides CP3-1
Download
Report
Transcript Valor 1000W Launch Slides CP3-1
Valor 1000 CP3
Valor 1000W CP3-1
May, 2007
Oct, 2009
Valor 1000W Series - Mission
Compete in low cost wet food production/ portioning
segment with simple, portable and low cost precision
scale
1
Internal use only
Valor 1000W Series - Concept
Address New Markets…
Food production, sanitary weighing
Wet, harsh working conditions
Low cost compact food portioning
With New Product….
High profile, red LED display, internal battery
Removable stainless steel pan, smooth housing
“Water-in, water-out” design concept, IP65 PCB sealed
Deliver Ohaus Value
Good performance, good quality, low cost
Check and accumulate application modes
Easy to clean, spray and keep sanitary
2
Internal use only
Valor 1000W Series - USP’s
Water Resistant IP65 design
“Water-Proof” housing
Sealed & compartmentalized internal electronics
Internal lead acid battery
Solid performance
Resolutions up to 7,500d
Level bubble and feet maximize accuracy
1.5 second or less stabilization time
Friendly operation
Bright dual LED displays front and rear
Easy to clean, Easy transport size
Simple Check weigh, and accumulate functions
3
Internal use only
Valor 1000W Series - Std Features
Standard Features
Water-Proof IP65 Design
ABS plastic housing with SS pan
Weighing units: kg, lb
Check weigh and Accumulate modes
Level bubble and adjustable feet
Internal rechargeable ~30 hour lead acid battery
6-digit, 7-segment LED front and rear
Stability indication, Auto zero tracking
Power saving auto shut off
Subtractive Tare up to capacity
Resolutions up to 7500d
Fast response time
4
Internal use only
Valor 1000W Series – Models/Apps
V11PW3
V11PW6
V11PW15
V11PW30
3kg x 0.5g
6kg x 1g
15kg x 2g
30kg x 5g
Applications
“All Wet Market” (markets
selling seafood, meats and
other wet goods)
Food Industry
Food institutions
Pre-packaged food sector
Check weigh
Ingredient mixing
5
Internal use only
Valor 1000W Series - Competition
Valor 1000W
CAS SW
Kern FAB
A&D SK
Gram DV
Capacities
3-30kg
2-20kg
3kg, 6kg, 15kg
1-30kg
1-30kg
Resolution
7,500d
2,000e
1,500e
5000d (2000e)
Housing
ABS plastic
ABS Plastic
ABS Plastic with SS pan
ABS Plastic
Display
Red LED
255 x 190 mm
Stainless Steel
LCD
9.05 x 7.48”
Stainless Steel
Front LCD
11,000d (non apvd)
ABS plastic, adjustable
feet
Backlit LCD
Modes
Checkweighing
Accumulation
None
None
None
None
Approvals
None
NTEP, OIML
EC/OIML
NSF, NTEP/PMT/CW&M on
SK and SK-D only
None
Options
None
Dual display
None
Dual display
AC adapter
None
Pan Size
Power
Units
LCD
9.05 x 7.48”
229x196 mm
SS Pan
Stainless Steel
AC or Standard Lead
AC adapter standard, 2xD
6 'D' size batteries
AC or Standard Lead acid AC or 6 “AA” batteries for
acid
Battery ~200 hours
size batteries not included (not included) for 600-1200
Battery ~30 hours
to 500-1000 hours
up to 500hr
hours
SK series – lb/g or lb/kg
lb, kg
lb, oz, kg, g
g,kg
SK-Z – lb, lb:oz or g
Weigh in g only
SK-D – lb/g or lb/kg
6
Internal use only
Valor 1000W Series – OH Positioning
Cap x Read
Valor 1000
Valor 1000W
Valor 2000
Valor 3000
Valor 5000
3gk x 0.5g
3kg x 0.5g
3kg x 0.5g
200g x 0.01g
3kg x 0.5g
6kg x 1g
6kg x 1g
6kg x 1g
2000g x 0.1g
6kg x 1g
15kg x 2g
15kg x 2g
15kg x 2g
30kg x 5g
30kg x 5g
15kg x 2g
30kg x 5g
3kg x 0.1g
6kg x 0.2g
15kgx 1g
30kg x 1g
Housing
IP Rating
Max d
Units
Display
Pan size
Power
Type Approvals
Certifications
Modes
ABS Plastic
ABS Plastic
ABS Plastic
SS
ABS Plastic
None
“Water-Proof“ IP65
All IP65
Some IP65
IP54
7,500d
7,500d
7,500d
20,000d
30,000d
kg,lb,g,oz
kg,lb
kg,lb,g,oz
Backlit LCD
LED
LED
Backlit LCD
Backlit LCD
250x 180mm
257x192mm
229x184mm
146x158mm
209x209mm
AC and IR lead acid
AC and IR lead acid
AC and IR lead acid
AC or 3 C battery
AC and IR lead acid
None
None
NTEP/OIML
NTEP/OIML
NTEP/OIML
None
None
NSF, USDA
NSF, USDA
NSF, USDA
Weigh, Check,
Accumulate
Weigh, Check,
Accumulate
weigh
Weigh, % S-gravity, Fl oz
Weigh, Check with LED
kg,lb,g,oz, lb:oz, dec oz, fr kg,lb,g,oz, lb:oz, dec oz, fr
oz
oz
7
Internal use only
Valor 1000W Series– Contents
Valor 1000W box includes:
1x Scale
1x SS platform
1x AC adapter
1x 5 language operator manual
8
Internal use only
Valor 1000W Series– Model Numbers
V11PWxx
V:
Family ID (V for Valor)
1:
Series level (1000 series)
1:
Version 1= First version of Valor 1000
P:
Housing Designator (X = Stainless steel, P= Plastic)
W:
Water-Proof
x:
kg Capacity Digit
9
Internal use only
Valor 1000W Series– Keypad
On/Off
Short Press: Turns scale on
Long Press: Turns scale off
Mode (right arrow)
Menu function: Shift to next digit
when setting parameters, or step
through menu settings
Zero (Yes)
Primary function: Sets display to zero
Menu function: Confirm settings
M+ (up arrow)
Primary function: Stores displayed
Tare (down arrow)
Primary function: Tares weight of
weight in accumulation memory
Display accumulation data when
display is at zero
Menu function: Increment displayed
value, or toggle through menu settings
item on pan
Set
Long Press: Enters menu mode
Menu function: Save settings and exit
Menu function: Decrement
the menu
displayed value, or toggle through
menu settings
10
Internal use only
Valor 1000W Series– Setup
Basics
Attach mains power
Charge battery 8-12 hours before
use
Set on firm level surface, adjust feet
for leveling
If Required calibrate scale before
operating
11
Internal use only
Valor 1000W Series– Setup
Calibration
Turn the scale on
During the start-up display [000000…999999], press
and hold SET until [FS--SP] is displayed
Press YES to display [P x], where x = position of
decimal point
Press to toggle through settings: 0, 1, 2, 3, 4
Press YES to select, then display [d x], where x =
scale divisions
Press to toggle through settings: 1, 2, 5, 10,
20, 50
Press YES to select, then display scale capacity
[xxxxxx] (kg)
12
Internal use only
Valor 1000W Series– Setup
Calibration
Press YES to select, then display [noLoAd]
Make sure pan is empty, then press YES to display [LoAd]
Press YES to select, then display default or last used span
weight [xxxxxx] (kg)
Press , , to edit the displayed value (as needed)
Place indicated weight on the scale, then press YES
[CALEnd] is momentarily displayed to indicate calibration
was successful, then exit to weighing mode
To abort calibration at any point, turn the scale off
13
Internal use only
Valor 1000W Series– Operation
Basic Weigh
Short press the On/Off button to turn on
scale
Segment check and software version will
be displayed
Keep pan clear and wait for stability and
center of zero indicator.
Place container on scale and press Tare
key.
Place object in container – net weight will
be displayed, stability indicator will appear.
14
Internal use only
Valor 1000W Series– Operation
Check Weigh (operate)
Use this mode to quickly compare samples to
a specified tolerance range.
Press Zero key to set the display to zero.
Place a sample on the pan and read the
weight and under / accept / over status on
display.
Scale will beep when weight is in
tolerance or outside tolerance (user
selectable setting)
Note: When the unit of measure is changed,
checkweigh limits and setting will be reset
to “0”.
15
Internal use only
Valor 1000W Series– Operation
Check Weigh (setup)
Over and Under Limits
Press and hold Set until [SEt-F0] is
displayed.
Press YES to view the upper limit [000000]
(or last value saved). The Over LED will
illuminate
Press , , to edit the upper limit value
(must be less than scale capacity).
Press YES to confirm, then view the
lower limit [000000] (or last value saved).
The Under LED will illuminate.
Press , , to edit the lower limit value
(must be minimum of 20d scale divisions,
and less than upper limit).
16
Internal use only
Valor 1000W Series– Operation
Check Weigh (setup con’t)
Press YES to confirm, then view the alarm
setting [rUn x], where x:
0=
1=
2=
3=
Checkweigh mode is disabled
Checkweigh LEDs are active, beeper will
sound when result is outside the Accept
range
Checkweigh LEDs are active, beeper will
sound when result is within the Accept
range
Checkweigh LEDs are active, beeper is
disabled
Press to step through available settings,
then press YES to select.
Press Set to save and exit.
17
Internal use only
Valor 1000W Series– Operation
Σ
Accumulate
Accumulate
Press Zero to set the display to zero.
Place the sample on the pan or tared
container
Press M+ to store the weight of the sample.
Storage is confirmed by the display [n x],
where n is the sample number
Remove the sample and place the next
sample on the pan and press M+
18
Internal use only
Valor 1000W Series– Operation
Σ
Accumulate (con’t)
Repeat this process until all samples have
Accumulate
been weighed.
Review the accumulation data by pressing
M+ when the display is at zero.
The display first shows the number of
samples [n x]
Press M+ to view the maximum sample
weight [Hxxxxx].
Press M+ to view the minimum sample
weight [Lxxxxx].
Press M+ to view the total sample weight
[xxxxxx].
19
Internal use only
Valor 1000W Series– Specifications
Specification
s:
Models:
Capacity x Readability
Repeatability (std. dev.
±)
Linearity (±)
Weight units
Modes
Tare Range
Stabilization Time
Power Requirements
Battery Life
Display Type
Pan Size
Dimensions
Operating Temperature
Range
Net Weight
Shipping Weight
Shipping Dimensions
Ingress Protection
V11PW3
3 x 0.0005 kg
6.6 x .001 lb
1g
V11PW6
6 x 0.001 kg
13 x .002 lb
2g
1g
2g
V11PW15
15 x 0.002 kg
33 x .005 lb
5g
V11PW30
30 x 0.005 kg
66 x .01 lb
10g
5g
kg or lb
Weigh, Accumulation, Checkweighing
2/3 or full scale
≤ 2 seconds
9VDC 500mA or 12VDC 420mA AC adapter
Internal rechargeable sealed lead acid battery
30-hour typical operation with 12-hour full charge
Front and Rear, 6-digit 7-segment, 14.2mm/0.56”H LED digits
257W x 192D mm / 10”W x 7.5”D
248W x 270D x 174 minH mm / 9.8”W x 10.6”D x 6.9”H
-10° to 40°C / 14° to 104°F
≤90% relative humidity, non-condensing
3 kg / 6.6 lb
4.3 kg / 9.5 lb
4.2 kg / 9.3 lb
355W x 370D x 300H
305W x 320D x 250H mm
mm
IP65
10g
20
Internal use only
Valor 1000W Series– Value Prop
Customer Needs:
Compact, water
resistant design
Portable with good
performance
Easy to keep clean
and store after day
of use
Ohaus Solution:
Customer Value:
Water resistant
protection, IP65 PCB
sealed
Able to work reliably in
wet environments
Lightweight, battery
powered, Up to 7,500d
resolution
Easy to transport, no
power cord needed,
precision accuracy
Smooth shapes, no
gaps, or ridges,
removable pan,
portable size
Low maintenance
Trouble free operation
USP
USP
USP
21
Internal use only