Transcript jc technology group co., limited

Specialized in alarm system, CCTV research,
manufacturing and trading
Want to know about us?
• JC TECHNOLOGY GROUP CO., LIMITED is an integrated and hitech corporation. We are engaged in designing, developing and
manufacturing security & safe products, such as alarm systems,
CCTV surveillance systems and home access control.
• We adopts the advanced import SMT production line for all our
production, and uses the best quality testing equipment, such as
oscilloscope, spectrum analyzer, and phone tester etc… we have
four busy production line at this moment, and with market
expansion, more production line is in preparing.
• Due to high quality and fashionable-designed products with our
sincere and professional service, we have gained high reputation
from our global clients.
Pasting by machine
Testing
Hand Pasting
Checking
CO
sensor
Gas
sensor
Wired
accessories
Shock
sensor
Smoke
senor
Water
sensor
Heat
sensor
Independent CO Detector JC-370T
◆ High reliability electrochemical sensor
◆ Stand-alone battery powered
◆ Adopt microprocessor control
◆ Malfunction auto-check indicator
◆ Sound and light alarm output
◆ Detect carbon monoxide
◆ SMT craft, high stability
◆ Executive standard: GB15322; EN50291; UL2034
*Operating voltage: DC 9V battery
*Detection area: 20 m2
*SPL: 85 dB / 3m (10ft)
*Dimension: Φ107 * 45MM
Independent CO Detector JC-371T &JC-372T
◆ Standby current:<15μA
◆ Alarm current:<30mA
◆ Operating temperature: -10 ℃ to +50 ℃
◆ Operating Humidity:≤ 95% RH
◆ Detection area: 20 m2
◆ SPL: 85 dB / 3m (10ft)
◆ Size: Φ106* 53MM
JC-371T Power supply: DC 9V battery
JC-372T Power supply:AC110-265V, 9V back-up battery
LCD CO detector(Independent) JC-376T
◆Sensor: Electrochemical CO sensor
◆Sensitivity/Alarm Time:
Within 60~90 minutes @ 50ppm CO concentration;
Within 10~40 minutes @ 100ppm CO concentration;
Within 3 minutes @ 300ppm CO concentration
◆LCD Displayer(optional): 3 digits LCD displayer
◆Audibility: 85dB ( at 1m distance ), Frequency 3±0.5KHZ
◆Led Indication /Sound Pattern :
Standby: Green Led flashes once every 30 seconds
Alarm: Red Led quickly flashes 4 times with unit chirping every 5 seconds,
then repeat.
*Power Supply : 3*1.5V AA batteries
*Dimension: 100mm*40mm, Weight: 0.2kg
CO+ smoke detector JC-377T
◆Alarm Sound: ≥85dB(3m)
◆Sensor: Combination optical, Carbon Monoxide Sensor
◆Low Battery Alert Remain: 7-15 days
◆Alarm Density:
1-Co: 30ppm,alarms not activate within 120minutes
50ppm, alarms within 60~90 minutes
100ppm, alarms within 10~40 minutes
300ppm, alarms within 3 minutes
2-Smoke: 1%~5%/FT OBS
*Operating Voltage: DC 9V Battery
*Dimension: Φ140X41mm
◆ Dedicated chip signal processing, and more energy efficient, more stable
◆ Alarm output: sound and light alarm
◆ Infrared photoelectric sensor
◆ Anti-electromagnetic interference
◆ SMT technology
◆ Be able to adapt to changes in the environment
◆ Dust and pest proof, anti-white light interference
*Operating voltage: DC 9V battery
*Detection area: 20 m2
*Sensitivity: 2.06% ft
*SPL: 85 dB / 3m (10ft)
*Dimension: Φ107 * 45MM
◆Dedicated chip signal processing, and more energy efficient, more stable
◆Alarm output: sound and light alarm
◆Infrared photoelectric sensor
◆Anti-electromagnetic interference
◆SMT technology
◆Be able to adapt to changes in the environment
◆Dust and pest proof, anti-white light interference
*Operating voltage: DC 9V battery
*Detection area: 20 m2
*Sensitivity: 2.06% ft
*SPL: 85 dB / 3m (10ft)
*Dimension: Φ107 * 36mm
◆ MCU processing technology
◆ Alarm mode: built-in sound and light alarm + relay output
◆ Infrared photoelectric sensor
◆ Anti-electromagnetic interference
◆ SMT technology
◆ Be able to adapt to changes in the environment
◆ Dust and pest proof, anti-white light interference
* Operating voltage: DC 12-30V
* Detection area: 20 m2
* Sensitivity: 2.06% ft
*Dimension: Φ104 * 55mm
◆Auto-reset and reset by power off
◆Alarm output N.C./N.O. optional
◆Infrared photoelectric sensor
◆Alarm mode: network output / LED indicator
◆SMT adopted, Strong adaptability to circumstance
◆Dustproof, mothproof, anti-white light
◆Alarm Sound: ≥85dB(3m)
◆Detecting area:80 square meters( installation height of 6m-12m), and 60
square meters (height of less than 6m)
◆Sensitivity: class I
◆Alarm output: relay output
*Operating voltage: AC 110-230V
*Dimension: 104mm dia.*51mm deep
*Products unit weight：0.215kg
◆ Alarm output: relay output + sound and light alarm+ electromagnetic pulse
output
◆ Adopt micro-processing and SMT technology, good stability
◆Malfunction auto-check indicator
◆Auto-reset
◆Automatic break-down-checking function
◆Can be connected with solenoid valve and extractor fan etc.
◆Can be used to detect natural gas and LPG
◆Alarm mode: Network output/sound &flash alarm
◆Alarm indication: red LED flash
◆Fault signal: red LED shine and buzzer scream for long time.
*Operating voltage:12VDC
*Alarm SPL :≥85dB@m
*Dimension:115*74*41mm
◆ Alarm output: relay output + sound and light alarm+ electromagnetic pulse
output
◆Adopt micro-processing and SMT technology, good stability
◆Malfunction auto-check indicator
◆Auto self-check function
◆Auto reset function
◆SMT design
◆Installation way: wall mounted
◆Can be used to detect natural gas and LPG
*Operating voltage: AC85-265V
*Rated power: ≤3W（AC220V）
*Alarm SPL: ≥85DB/M
*Alarm mode: Network output/sound &flash alarm
*Dimension: 115*74*47mm
*Products unit weight：0.255kg
◆Gas species: LPG& Natural gas
◆Auto reset after alarm
◆MCU process
◆Sensor with high stability and low power consumption
◆Auto check and indication for malfunction
◆Detecting natural gas and LPG
◆SMT adopted
◆Alarm output: Relay output; sound & flash alarm
*Operating voltage：AC 220V
*Sound level: 85dB/3 meters
*Installation：Ceiling mounted
*Dimension: ¤104*51mm
◆High reliability sensor
◆MCU processing adopted
◆Malfunction auto-check indicator
◆Designed to detect Natural gas, LPG
◆SMT manufacture technology, good stability
◆Be able to work with electromagnetic valve
◆Digital LED display for gas concentration
◆Sensor: Catalytic type
◆Concentration display: Digital LED
◆Gas species: LPG; artificial gas
*Operating voltage:AC85V-265V
*Alarm output: Sound &LED flash alarm
*Horn output: 85dB(at 10ft)
*Rated power:2.5W
*Dimension:118.5*82*43mm
◆alarm output: N.O/N.C Optional
◆Alarm tempetature:57 degree
◆Reset after power off
*Operating voltage: 9-35V/DC
*Environment temperature:-10°C ~ 60°C
*Environment humidity:≤95% RH
*Standby current:≤100μA
*Alarm current:60mAh
*Alarm temperature: 60°C±2°C
◆Comply With BS EN 54-5; UL539
◆Photoelectric Sensing Technology
◆Low Battery Warning
◆Loud 85dB Alarm
◆Instant Test Button
◆Interconnect ability
◆57℃ (135°F) Fixed Rate
*Operating voltage: 9V Battery
*Horn output: 85dB at 10ft
*Smoke Alarm Point: 2.06%/ft
*Alarm temperature: 57℃ (135°F)
*Dimension: 124 mm(Dia)*40mm(H)
◆Comply With EN14604;UL217
◆Photoelectric Sensing Technology
◆Low Battery Warning
◆Loud 85dB Alarm
◆Interconnect ability
◆57℃ (135°F) Fixed Rate
*Operating voltage: AC power or 9V Battery
*Horn output: 85dB at 3m
*Smoke Alarm Point: 2.06%/ft
*Alarm temperature: 57℃ (135°F)
*Dimension: 124 mm(Dia)*40mm(H)
*Working voltage: built in DC9V battery or 9-12V DC
*Working current: standby: 10uA, alarm current: 30mA
*Signal output: relay N.C
*Dimension: 10*6.7*4 cm
The shock sensor. Simple to set-up, with an increased dual sensitivity range
and exceptionally high false alarm immunity, these stylish detectors are ideal
for use in almost any environment. It has a host of additional features to
further aid installation and enhance performance.
◆INCREASED DUAL SENSITIVITY RANGE;
◆EASY SET-UP PROCEDURE;
◆FULLY ADJUSTABLE DETECTION;
◆ULTRA HIGH FALSE ALARM IMMUNITY;
◆CONFORMALLY COATED ELECTRONICS;
◆SELECTABLE LED INDICATION;
◆EN 50131 GRADE 2;
◆AVAILABLE IN WHITE OR BROWN;
◆Information Processing Method: Input Pulse Count Trigger
◆Operating Mode: NC
◆Input Sensitivity: Analogue, Continuously Adjustable
◆System Reset Method: Manual And Automatic Optional
◆Pulses Required To Input: 1-8 Times, Adjustable
◆Input Pulse Interval, 0.5ms-50ms Analogue, Adjustable
◆Working voltage: DC12V；
◆Match with vibration detector, improve anti-faulse alarm ability.
◆Input sensitivity: Wired connecting, sensitivity is selective.
◆System setting: manual or automatic
*Voltage: DC12V
*Current: 20mA
*Adjustable gross attack times
*1 to 8 selectable pulse counts
*Input loop: N.C
*Sensitivity: adjustable.
JC TECHNOLOGY GROUP CO., LIMITED
ADD: Qianshi Mansion, Oubei Town,Yongjia, Wenzhou, Zhejiang, China
Zip: 325101
E-mail: [email protected], [email protected]
Tel: 0086-155-58858528, 0086-577-67128118
Fax: 0086-577-67128118
Skype: jctechsales, tracyheechina
MSN: [email protected]
Web: www.jctechgr.com www.jctechgr.com
Thank you!