Transcript AQ3 THASMS-presentation-in-english111012

THASMS
AQ3-PureWaterSystem
DEVICE FOR CLEANING AND WATER TREATMENT
THASMS AQ3
THASMS Units can recycle and purify any toxic water
into clean drinking water, again and again.
Today’s Global Water Crisis has created an urgent need
for THASMS AQ3 water units!
APPLICATIONS
• Purifies water contaminated with micro-organisms and
organic and inorganic materials – cleans filthy RIVERS!
• Produces drinking water and utility; for use in
Pharmacy, Food and other industrial sectors, including
Agriculture – super crops -preventing soil depletion!
• Recycles and purifies all Waste Water; guaranteeing a
sustainable clean environment.
• Desalination of sea water – advanced technology.
• Produces drinking water and utility water for
agriculture and industrial recycling cleaning systems.
• Regenerates and re-recovers any Waste Water in all
fields of human activities, including natural sources.
THASMS-AQ3 Pure Water System
THE SIMPLIFIED SCHEME OF THE THASMS TECHNOLOGY
WASTE SUPERCONCENTRATE
3
4
2
5
INTENTIONALLY OPTIMIZED
WATER FOR VARIOUS PURPOSES
(DRINKING, GROWING PLANTS,
FOOD INDUSTRY, ETC.)
12
11
10
6
1
WASTE OR
SALT INPUT
WATER
MECHANICAL
IMPURITIES
LARGER THAN
0.8 mm
REMOVING
7
9
8
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
standard mechanical prefiltration
glass prefiltration
cascade mechanical prefiltration
magnetic resonance
nanomembrane seperation
UVC sterilization
HF membrane filtration
ionization
mineralization
MC optimlzation
following optimization a) –by using the output water
following optimization b) –by using the output water
I. Grade: PRE FILTRATION (inlet water is deprived of most mechanical and chemical contaminants) by a system of mechanical and absorption filters
II. Grade: NANOMEMBRANE SEPARATION (residual water fouled nanomembrane is divided into the permeate outlet, which is free from virtually
100% of the inorganic and inorganic substances, and waste super concentrate)
III. Grade: STERILIZATION (nanomembrane separation output water is sterilized by powerful UVC lamp and subsequently filtered dead little bodies of
bacteria on the HF membrane)
IV. Grade: OPTIMIZATION (output water (after sterilization) is optimized according to the purpose for which it is intended. Water is structured and
enriched with an optimum amount of minerals (and possibly organic matter in the case of agrooptimalization))
THASMS-AQ3 Pure Water System
Technology
The Technical Parameters
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Type of treatment of contaminant - totally non-chemical(physical) or mechanical treatment type of an output
product: technological and drinking water
Technology of treatment: compounded TMC and amorphous alumino-silicate filtration, cascading mechanical
filtration , membrane hybrid separation
Maintenance of equipment: Non-chemical, using levitation of particles in pulsating multispectral
electromagnetic field based on principal of magnetic and ultrasound resonance.
Performance of the equipment : min 0,5m3 , max 10m3 per day purified technological and drinking water in
one module, minimum possible waste concentrate
Automatic control of operation, 600 - 1200 liters / 24 hour, Visual and audible fault indication
The operating pressure in the system : 2,3 - 3,8 bar , in turbo mode 9-16 bars,
The temperature of input water : min 4 deg C - max 45 deg C.
TDS: > 10 000 ppm, SDI: > 10 turbidity, pH: 0 - 14
Power input : min 0,75 and max 2,5Kw, Power consumption. Energy from 55 to 100 W / h
Affectivity of filtration : min95 , max 98 %
Refuse concentrate : 70 : 1 after moisture elimination
Type of separation: bacteriological, biological, mineral, chemical, gaseous
Elimination of refuse; concentrated solids will be used in additional processing program
Longevity of the system : when periodically maintained : 30 years
Source of contaminant may be a river, lake, artesian well, pool, well, brackish water, rain water tank, process
tank or overflow of wastewater treatment
Output is a modified water technology, according to further sterilized, remineralization, oxygenated, ionized,
structured, etc. ...
Storage tank plastic or stainless steel from 12 L to 350 L, Design frame, gauges, UV lamps - stainless steel
- Extremely low power consumption
- Low input and output pressures
- Operation of the network, battery or solar panel
- Noise level to 15 db
- Super compact design
- The minimum possible size
- Wall and floor
- The minimum possible pulse waste
- The maximum possible output per hour
- Two types of water technology; remineralization and
sterilization
- Triple check, extreme bacteria-FREE
-- Vacuum extraction of membrane permeate
- Optimized linear regulation waste
- A combination of composite and hollow fiber membrane
- The possible operation without power. Energy, at reduced
performance
- Traffic can be switched on turbo + 30%
- Best price-performance ratio
- The best ratio of treated wastewater and the market
- Low maintenance costs
- Customer service
- Extremely long life with stable parameters
- Optimization of operating conditions on the ground
- Automatic pulse cleaning dynamic membranes
- Automatic control of activity and intensity of UV lamps
- Automatic level control mineralization
- Stainless steel main parts
•
•
•
•
•
•
•
•
•
•
•
THSMS-AQ3 is an unrivalled providing the
highest efficiency water purifying technology
Its high capacity can meet global municipal and
industrial recycling needs
Produces water for any use from demineralised
to drinking; with easy control increasing the
mineral contents and oxygen to specially
adjusted water for pharmacy, the food industry
and the industry.
Super-affordable in comparison with traditional
solutions
Significant lower operating costs & minimum
energy consumption
Long life - 30 years for the regular maintenance
Electronic monitoring and control at a distance
Small units can be modified to fit any system,
easy to install
Solar activated – goes to work immediately
Environmental benefits of reduced water
pollution and sustainable water-use
Improves health and can reduced disease and
deaths in third world countries
AQ3_200_4_UV_REM_SOL
AQ3_200_4_UV_REM_PWR
TYPES of APPLICATION
• Water filtration for a family (capacity 0,5 M3 – 2,) as drinking water plus
utility water, a substantial reduction in consumption of water, as well as
the reduction in pollution of the environment
• Full recycling of water systems; complete separation of objects from the
source water (sanitation sought by survivalists)
• Purifies systems and offers standby management of water for farms and
agricultural farms with inadequate resources of safe water
• Desalination of water systems for ships and areas without enough fresh
water (solar panel activated)
• Systems cleaning and adjustments of water for villages and towns
• Systems cleaning and adjustments of water for industrial use
• Mobile water cleaning systems and adjustments of water for the army,
industry, agriculture and ecology
THSMS -AQ3 Pure Water System is able to clean water from any
types of contaminants with 99.9% efficiency
All Types Micro-organisms
•
All species micro-organisms Cryptosporidium, Giardia lamblia, Heterotrophic plate count, Legionella, total Coliforms
(including fecal and E.Coli), Turbidity, Viruses (enteric)
Disinfection
•
Acids. Bromate, Chlorite, Haloacetic, total Trihalomethanes (TTHMs), Chloramines (as Cl2), Chlorine (as Cl2), Chlorine
Dioxide (as ClO2)
Inorganic Substances
•
Antimony, Arsenic, Asbestos, Barium, Beryllium, Cadmium, Chromium, Copper, Cyanide, Fluoride, Lead, Mercury, Nitrate,
Nitrite, Selenium, Thallium
Organic Substances
•
Acrylamide, Alachlor, Atrazine, Benzene, Benzo (a) pyrene (PAH’s), Carbofuran, Carbon Tetrachloride, Chlordan,
Chlorobenzene, 2,4 -D Dalapon, 1,2 - Dibromo-3 -chloropropane (DBCP), o-Dichlorobenzene, p-Dichlorobenzene, 1,2 Dichloroethane, 1,1 -Dichloroethylene, cis-1,2 -Dichloroethylene, trans-1,2 -Dichloroethylene, LEM, 1,2 -Dichloropropane, di(2 -ethylhexyl) adipate, Di- (2 -ethylhexyl)phthalate, Dinoseb, Dioxin (2,3,7,8 -TCDD), Diquat, Endothall, Endrin,
Epichlorohydrin, Ethylbenzene, Ethylene Dibromide, Glyphosate, Heptachlor, Heptachlor z , Hhexachlorobenzén,
Hexachlorocyclopentadiene, Lindane, Methoxychlor, Oxamyl (vydate),, Polychloronared, biphenyls (PCBs),
Pentachlorophenol, Picloram, -, Styrene, Tetrachlorethane, Toluenu, Toxaphene, 2,4,5 -TP (silvex), ), 1,2,4-Trichlorobenzene,
1,1,1-Trichloroethane, 1,1,2-Trichloroethane, Trichloroethylene, Vinyl chloride, Xylenes (total)
Radio-Nuclides
•
Alpha particles, Beta particles and photon emitters, Radium 226 and Radium 228 (combined), Uranium
COMMUNITY WASTE WATER
Pathogens: (Giardia Lamblia, Salmonella, Shigella, Typhoid, Yersinin enterocolitica and Viral Hepatitis and
others)
Non-metallic contaminants: (phosphates, nitrogen and others)
Synthetic organic contaminants: (pharmaceutical drugs, chlorinated solvents, hydrocarbons and others)
INDUSTRIAL WASTE WATER:
Metallic contaminants: (aluminum, arsenic, barium, cadmium, copper, chromium, iron, lead, lithium,
manganese, mercury, molybdenum nickel, silver, uranium, and zinc)
Non-metallic contaminants: (acids, ammonia, nitrate, phosphates, boron, chloride, cyanide, fluoride,
radium, selenium, sulfates and various radioactive isotopes)
Synthetic organic contaminants: (pesticides, chlorinated solvents, hydrocarbons and poly-chlorinated biphenols (PCBs) and others)
FILTHY RIVER:
Combination of all contaminants : pathogens, metallic contaminants, non-metallic contaminants, synthetic
organic contaminants from community, industrial and agricultural waste water.
•Pathogen (for instance: Escherichia coli)
, THSMS remove more than 99%, quantity depends on the concentration in 1 liter of water
•Non-metallic contaminants (for instance: nitrate), THSMS remove more than 99%, quantity depends on the concentrations
in 1 liter
•Metal contaminants (for instance mercury:), THSMS remove more than 99quantity depends on the concentration in 1 liter of water
•Synthetic organic contaminants (for instance: pesticides), THSMS remove more than 99%, quantity depends on the concentration
in 1 liter of water.