Document

Transcript Document

CUT COSTS & INCREASE EFFICIENCY

WITH INGRESSUS CONTROLLER AND BIOMETRICS/CARD SLAVES IMPLEMENTATION

LET’S LEARN ABOUT INGRESSUS CONTROLLER

• Ingressus is a serial main controller series produced by FingerTec. • With Ingressus installation, intelligent (master readers) or basic (slave) readers that are connected to the doors do not make access decision. They forward all requests to the Ingressus for access decisions .

• In case where there is no connection to the Ingressus, intelligent readers will use their internal database to make access decisions and record events while basic readers (slave) that have no database, cannot function without Ingressus.

ADVANTAGES OF INSTALLING INGRESSUS

Reduces workload on the host PC - This is significant as the PC only needs to communicate with a few of them instead of handling heavy load of master readers. High reliability and security any other systems.

– The access decision is controlled by the controller which is usually installed away and not visible to the user. The communication line is also dedicated to access purpose and is not shared with Overall cost of system implementation is lower - The system would be able to deploy inexpensive slave products at at least 25% less cost than using masters and get the same results altogether. Choose either Ingressus I or II and connect with inexpensive slaves for economical effective implementation.

GETTING TO KNOW: INGRESSUS I, II & IV

• • • • Ingressus series offers three type of centralized door access control systems, Ingressus 1, Ingressus II and Ingressus IV. Ingressus I supports up to 2 sets of door locks for one door installation; Ingressus II supports up to 4 door locks for two doors installation, and Ingressus IV supports up to 8 door locks for four doors installation.

• Ingressus is linked to slave readers via serial cable S485 or Wiegand readers for access decisions.

• • Verification via Ingressus using slaves – how does it work?

When a fingerprint template/card ID is captured at the slaves, the information and data is sent and stored in Ingressus. The result of the verification will be sent to the slave terminals for door activity (close/open).

AMAZING FEATURES OF INGRESSUS !

• 3 types of surge protection – Extending the lifespan of your products.

• Connect with all security devices – Link all security devices under one management .

• Multi-card operations – You could set multiple cards for high-secured areas.

• Readily available I/O Ports for easy implementation.

EVEN MORE FEATURES OF INGRESSUS!

 Supports various Wiegand and Card terminal formats.

 Data Communication via IP or RS485 – most common methods of communication.

 Real-Time Door Access Monitoring.

 SDK for integration with 3rd party software.

 Bundled with Ingress – powerful door access software.

LOOKING FOR A DOOR ACCESS SOLUTION THAT IS VALUE FOR MONEY?

How do FingerTec slaves help you?

• Exit terminal that is cost effective.

• A more secure exit option instead of a push button. • A simple yet advanced exit terminal to track staff movement.

Introducing FingerTec’s Slave Series

LEARN ABOUT FINGERTEC BIOMETRICS/CARD SLAVES

• All transaction logs are stored in Ingressus for easy management.

• Connect to a third party controller seamlessly with Wiegand 26-bit output.

• Flexible integration with other master terminals for a complete IN-OUT access system.

• Dustproof and water resistant – suitable for outdoor installation.

WE RECOMMEND

BIOMETRICS

 Convenient and easy to use.

 Promotes punctuality effortlessly .

 Eliminates tardiness and buddy punching .

 Accurate data records and automated data analysis.

 Economical and suitable for SMEs and big corporations.

 Centralized data system to reduce administrative costs and frustrations.

• •

MINIMAL EFFORT FOR

INSTALLATION

• • The slaves compact size makes installation a breeze! Minimalistic, unobtrusive design appropriate for any environment i.e. rooms or offices.

Less parts means less maintenance fees and minimal chances of breakdowns.

Plan Ingressus installation according to your needs.

INGRESSUS

IS ADAPTABLE TO SUIT YOUR NEEDS

Kadex Family

FingerTec readers are aplenty and many can be paired with the slaves for a variety of purpose and cost-effectiveness.

Ingressus can also be paired with an alarm siren, alarm systems, smoke detectors, access control accessories and CCTV for added security.

INGRESS ADVANCED ACCESS CONTROL SYSTEM

Every purchase of INGRESSUS is bundled with INGRESS, the advanced access control software. Find out the features and more!

• Centralized management – for concurrent branch monitoring.

• • Real-Time Alarm and Event Monitoring unusual door activity. – with the use of GRAPHICAL FLOOR MAPS, one can easily monitor door activity. Using LIVE SYSTEM CONTROL, one can remotely unlock doors and alarms can be configured to notify of Ease of use – data analysis and reporting, easy data exporting and integration.

• Advanced Time Attendance Features – Quick Setup, easily transfer large batches of users, use 29 different report templates with customizable water mark that can be exported into many popular formats.

• User-friendly features – drag-and-drop methods and shortcut icons with ribbon menus.

• All of these features FREE OF CHARGE – find out more at http://www.fingertec.com/images/w_brochure/IngressusC_e.html

GET SOME AND THEN MORE WITH

FINGERTEC

High Quality Terminals

Did you know that all of our terminals go through stringent burning tests and quality control before they reach you?

Online Resources

Did you know that we grant FREE access to technical tips, brochures in a variety of languages, and marketing materials?

After-sales Support

Did you know that we provide help through Teamviewer & Skype LiveChat , 7 days a week via our technical support team?

YOU

QUESTION

, WE

ANSWER

!

Q A Can slave terminals support any software? No, all transactions are stored the Ingressus and all data from the Ingressus will be analysed using the bundled application, Ingress.

Q A How many slaves can be paired with one master?

We offer two types of Ingressus, I & II. For Ingressus I, you can install a max of 2 slaves and Ingressus II can take 4 slaves at a time. Plan your controller purchase based on your need and you can always add in the future. Q A Does Ingressus come with its own power supply? No, you must supply an independent power source to Ingressus for security purposes because in case of power failure, doors will not be automatically unlocked.

Q If I have the Ingress software installed, do I still need TCMS V2 for attendance? A The Ingress software is perfectly equipped for all your time attendance needs, so there is no need for TCMS V2 if a client is focused on door access control as well.

Q Why should I invest in FingerTec when there are many cheaper options available? A FingerTec provides high quality hardware with powerful software and round-the-clock support – this saves you money in the long run.