Trade of Plumbing – Phase 2 Module 1 – Unit 1 Module 1
Download
Report
Transcript Trade of Plumbing – Phase 2 Module 1 – Unit 1 Module 1
Trade of Plumbing – Phase 2
Module 1 – Unit 1
Module 1:
Thermal Process and Mild Steel
Pipework Code of Behaviour & Health &
Safety Guidelines
Unit 1 – Training Services Unit
Trade of Plumbing – Phase 2
Module 1 – Unit 1
Welcome
Develop – Knowledge,
Skills, to enter the labour market.
Health & Safety, prevent accidents
at the place of work
Trade of Plumbing – Phase 2
Module 1 – Unit 1
Standards of Behaviour in the Training Centre
Smoking in designated
areas
Cigarette ends to go into
containers
No antisocial behaviour
No bulling
No loitering
No littering
Do not clock-on for others
No wilful damage of
property & equipment
Do not remove goods from the centre
Theft = dismissal
Sexual harassment = dismissal
Racism = dismissal
Setting of fire alarms = dismissal
Interfering with fire alarms = dismissal
Close circuit TV in operation
Do not appear in an unfit state = home
No wilful damage of property &
equipment = dismissal
Trade of Plumbing – Phase 2
Module 1 – Unit 1
Payment of Training Allowance
Clock card – first day
Payment weekly for clocked hours only
Lost or damaged card = €6.00
First week pay made at end of second week
Payment made to your bank account – pay slip
Bank account details, name, number sort code
Trainees must give ID, Drivers License on first day
Travel allowance if you live more than 3 miles away
Accommodation allowance if you live 16 miles away
You will receive travel or accommodation not both
Sick pay paid with doctors certificate
Sick pay for 3 days in 3 months or 6 days in 6
months
Queries – Services To Business (STB) department
Trade of Plumbing – Phase 2
Module 1 – Unit 1
Time Keeping and Attendance
Monday
Tuesday
Wednesday
Thursday
Friday
08.30-15.45
08.30-15.45
08.30-15.45
08.30-15.45
08.30-12.45
You MUST be on time
Do not clock out early
Queue in an orderly manner
Rules:
Clock In late or clock out twice one week = verbal warning
Repetition: Written Disciplinary Review (DR1)
Repetition: Written Disciplinary Review (DR2)
Repetition: Written Disciplinary Review (DR3) and dismissal
Do not leave without notifying instructor, always clock out and in
when you return
Failure to notify instructor within 5 working days of absenteeism =
dismissal
Absent for 10 days in total = dismissal
Trade of Plumbing – Phase 2
Module 1 – Unit 1
Canteen Behaviour
Safety clothing & footwear must be worn
Queue in an orderly manner
Sit in allocated areas only
No smoking
Adhere to canteen timetables
Show courtesy to canteen staff
Purchased goods cannot be exchanged
Return tray and utensils to trolley
Shoplifting = dismissal
CCTV in operation
Sick pay paid with doctors certificate
Place soft drink cans in bins provided
Trade of Plumbing – Phase 2
Module 1 – Unit 1
Car Park Behaviour
MAX speed limit – 5MPH
Follow road arrows & signs
Park at rear of building
Park at your own risk
Do not park in Staff Only marked spaces
No sport allowed
Keep car park litter free
Warning stickers will be placed
CCTV in operation
Trade of Plumbing – Phase 2
Module 1 – Unit 1
Classroom Behaviour
No smoking
Use of mobile phones prohibited
Keep the classroom tidy
Do not enter other classrooms without
permission
Use of personal stereos prohibited
Food & drink is not permitted
Wearing of overalls and boots is not
permitted
Trade of Plumbing – Phase 2
Module 1 – Unit 1
Workshop Behaviour
No smoking
You MUST wear protective clothing and
boots
Use of personal stereos prohibited
Use of mobile phones prohibited
Keep the work area clean & tidy
Do not enter other workshops without
permission
Wearing of rings, neckchains etc. is not
permitted
Food & drink is not permitted
Trade of Plumbing – Phase 2
Module 1 – Unit 1
Disciplinary Procedure
Verbal Minor breach of rules:
The Instructor issues a verbal warning
DR1*
Continuous breach of the Rules:
The Instructor issues a Disciplinary Review Form, signed by the
Instructor, Trainee/Apprentice and Assistant Manager
DR2*
Continuous breach of the Rules:
The Instructor issues a Disciplinary Review Form, signed by the
Instructor, Trainee/Apprentice and Assistant Manager and a copy is
sent to Employer of Apprentice
DR3*
DISMISSED FROM COURSE
* Disciplinary
Review DR Example, next slide
Trade of Plumbing – Phase 2
Module 1 – Unit 1
Computer User Policy
Use computers, professionally,
responsibly etc.
Do not expect privacy
Computer system belongs to the ETB
Do not take software to nor remove software
from the classroom
DO NOT USE computer resources for any of
the following:
Sending, receiving explicit, profane etc.
material
Handling or storing commercial or personal
advertisements
Do not waste computer resources, i.e. sending
mass emails etc.
Using or copying software
Install unauthorised software
Set passwords without permission
Violating any law
Trade of Plumbing – Phase 2
Module 1 – Unit 1
Waste Management
&
Waste Recycling Policy
Soft drink cans
Paper
Cardboard
Metal
Batteries
Rubble –
bricks/blocks/mortar
Waste oil
General waste
Timber –
nails/screws/removed
Trade of Plumbing – Phase 2
Module 1 – Unit 1
Dismissable Offences
Third Disciplinary Review (DR3)
Failure to notify your instructor within 5 working days of
absenteeism
Bullying
Clocking on behalf of others
Malicious damage to property & equipment
Setting off the fire alarm maliciously
Interfering with fire fighting equipment
Sexual harassment
Racism
Theft
Unlawful use of the internet
Trade of Plumbing – Phase 2
Module 1 – Unit 1
Discriminatory Grounds
Discriminatory is outlawed on 9 grounds =
gender – marital status – family status
sexual orientation – religious belief – age
disability – race – member of the traveller community
Harassment = repeated or unwanted verbal or physical
behaviour
Bullying = dismissal
Sexual harassment = dismissal
Racism = dismissal
Trade of Plumbing – Phase 2
Module 1 – Unit 1
Health & Safety
Trade of Plumbing – Phase 2
Module 1 – Unit 1
Safety Declaration
Introduction
Declaration
Responsibility
Procedural documents
Safety auditing
Methodology statement
Hazard identification
Objective
Provide a safe and healthy training and work environment
Trade of Plumbing – Phase 2
Module 1 – Unit 1
Safety Declaration…….continued
Training Centre responsibility
Provide training and instruction
Make safety devices available
Staff, trainees and apprentices responsibility
Reasonable care of his/her own safety
Co-operate with the Training Centre
Use protective clothing and equipment
Report any defects in equipment etc. immediately
Do not intentionally interfere with any appliance, etc.
Trade of Plumbing – Phase 2
Module 1 – Unit 1
Accident Prevention
Injuries are caused by accident
Accidents are unplanned happenings
Unplanned happenings are initiated by unsafe actions
Take responsible attitude
Be aware of specific hazards
Fix it before you leave
Trade of Plumbing – Phase 2
Module 1 – Unit 1
Accident Prevention…….continued
Handling Materials
Not what is handled but how it's handled
Walking
Watch your step
Falls
Stack materials in a stable and steady manner
Put tools away
Don't climb
Machinery
Operate and clean using the makers instructions
Check guards
Disconnect the power supply
Handle all cutting parts with care
Ensure floor free from grease and is dry
Concentrate on the job
Trade of Plumbing – Phase 2
Module 1 – Unit 1
Accident Prevention…….continued
Tidiness
Keep the workplace tidy
First aid
If you feel ill, report to your instructor immediately
Fires
Keep fire-fighting equipment clear of obstructions
Keep doors and exits clear of obstructions
Electricity
Take care
Look at the information plate
Is the cable sound and undamaged?
Is the plug undamaged?
Compressed air
Compressed air can injure and kill
Trade of Plumbing – Phase 2
Module 1 – Unit 1
Accident Prevention…….continued
Eye protection
Always wear eye protection
Footwear
Invest and wear safety boots
Breathing Apparatus
Wear masks or breathing apparatus
Hearing protection
Wear ear protection
Trade of Plumbing – Phase 2
Module 1 – Unit 1
Computer Health & Safety
Trade of Plumbing – Phase 2
Module 1 – Unit 1
Computer Health & Safety …….continued
Trade of Plumbing – Phase 2
Module 1 – Unit 1
Unsafe Acts
Trade of Plumbing – Phase 2
Module 1 – Unit 1
Unsafe Acts…….continued
Trade of Plumbing – Phase 2
Module 1 – Unit 1
Manual Lifting
Correct way to lift
Trade of Plumbing – Phase 2
Module 1 – Unit 1
Manual Lifting …….continued
What can happen if
you do not lift
correctly
Trade of Plumbing – Phase 2
Module 1 – Unit 1
Rules of Manual Lifting
Trade of Plumbing – Phase 2
Module 1 – Unit 1
Rules of Manual Lifting…….continued
Trade of Plumbing – Phase 2
Module 1 – Unit 1
Industrial Dermatitis & You
What is industrial dermatitis?
Disease of the skin – soreness/redness/
Irritating substance
Where on the body?
Hand and arms
Eyes, face and neck
What causes industrial dermatitis?
Wide variety of things
Mineral oil, chemicals, acids, resins, solvents, degreasers
How to prevent industrial dermatitis
Wash your hand, face and neck
Do not wear dirty clothes
Action
Go to the doctor
Trade of Plumbing – Phase 2
Module 1 – Unit 1
Finally
Develop your safety sense
Attitude of mind
Alertness
Knowledge
Read the Safety Code
Play safe
Clothing
Avoid loose clothing
Hand tools
Keep your hand tools in good order