Transcript Slide 1

Mobile Number Portability (MNP)
Implementation in Wire Line Switches
Meeting at Circle Office
Dated 12.01.2010
Agenda
1. What is MNP-An overview?
2. DOT guidelines.
3. What is required to be done in Wire Line Switches and
why?
4. Post MNP-How to make Wire Line switches
compatible with Mobile Network?
5. Implementation Plan
6. What is required to be done in CDR Billing Project?
7. Responsibilities of Nodal Officers of the Circles
8. Timelines
9. Discussions
Steps already taken:
• Completion of Field Trial at Bangalore
• Issuing of instructions along with technical note
vide letter dated 15.12.2009.
• Issuing of List of RN
• Finalization of solution for making CDR Billing
Project compatible with MNP.
• Development and field trial of C-DOT patch
required for above solution completed.
What is Number Portability?
• Portability of Mobile Numbers between all GSM
and CDMA operators within the same Service
Area.
• A Mobile subscriber can change his/her operator
within the same Service Area without changing
his/her number.
• No Portability beyond Service Area.
• Portability between GSM and CDMA network of
same operator in same service area possible.
What is Number Portability?
Later Mobile Number is
provisioned in Recipient
operator’s HLR
First Mobile Number is deprovisioned from Donor
operator’s HLR
9420023456
PSTN
HLR
HLR
Wireless
Operator A
Wireless
Operator B
Subscriber changes Mobile Service Provider
while keeping its mobile number
CMTS Licensed Service Area

9420023456

Some Definations
• IAM (Initial Address Message)- One of the CCS-7
Message, used to seize the circuit between two xges,
contain Calling and Called party number
• SSTP- Stand alone STP
• STP- Signaling Transfer Point
• RN- Routing Number
• MCHA- Mobile Clearing House Administration
Some Definations-Contd
NPDB- Number Portability Database
RN – Routing Number
TAX – Trunk Automatic Exchange
ILD – International Long Distance TAX
NPDB – Number Portability Database
Home RN – Operators own RN
PSTN – Public Switched Telephone Network, here
BSNL Wire line Network
PLMN – Public Land Mobile Network, here BSNL GSM
Mobile Network
Porting Definations
Not Ported – Mobile Numbers belonging to BSNL. These numbers will be
defined in the NPDB with HLR (PC & SSN) information .Will be defined in
the Range DN Table of the NPDB
Imported – Number ported into BSNL from another network. These numbers
will be defined in the NPDB with HLR (PC & SSN) information. Will be
defined in the Single DN Table of the NPDB.
Ported Out – Number Ported out to another network from BSNL . These
numbers will be defined in the NPDB with RN information . Will be defined
in the Single DN Table of the NPDB.
Foreign Number – Other Operator subscriber not known to be ported. These
numbers will be defined in the NPDB with RN information. Will be defined
in the Range DN Table of the NPDB.
DOT Guidelines
• In first Phase MNP is to be implemented in 4
metros and all 5 “A” category LSAs – 9 LSAs in
total
• In second phase – “B” and “C” category Circles
• Deadline: 31.03.2010
What is to be done in land Line switches and why?
Presently calls are being routed to concerned operator based on dialed number
Post MNP ; to route the Mobile calls to correct operator switches has to determine the present
operator of the dialed number(B)
To know the present operator of the dialed number(RN) , switches need to be connected with
external database i.e. LPDB
After getting the RN, switch routes the call to concerned operator based on RN+B Information
.
Routing and Charging of Mobile Calls in Pre MNP Scenario- Routing of calls from local Xge to L-II TAX
Voice and Signaling path
LEX
PC: 2000
Routing Table
Route Code -> Destination
9..……
09…….
->PC 4000
->PC 4000
(Associated Mode)
PSTN
Cloud
L-II TAX
PC:4000
Route Code->
94282..……
98382…….
09……
Routing Table
Destination- Signaling Point Code
-> Send to PC 4001 (BSNL MSC)
-> Send to PC 4005 ( BHARTI MSC)
-> send to PC 5000 (L-I TAX)
Charging Table
Charging Table
Route Code -> Charging
9..……
09…….
-> by Next Higher Xge
->by Next Higher Xge
Route Code ->
94282..……
98382..……
094500…….
099567…….
Charging
->Charging Defined(intra operator-intra circle)
->Charging Defined(inter operator-intra circle)
-> Charging Defined (inter Circle- intra operator)
-> Charging Defined (inter Circle- inter operator)
Routing and Charging of Mobile Calls in Pre MNP Scenario- Routing of calls from L-II
TAX to L-I TAX/MSC
From
LEX
Route Code->
94282..……
98382…….
09……
L-II TAX
PC:4000
Routing Table
Destination
-> Send to PC 4001 (BSNL MSC)
-> Send to PC 4005 ( BHARTI MSC)
-> send to PC 5000 (L-I TAX)
Charging Table
Route Code ->
Charging
94282..…… ->Charging Defined(intra operator-intra circle)
98382..…… ->Charging Defined(inter operator-intra circle)
094500……. -> Charging Defined (inter Circle- intra operator)
BSNL
MSC
(PC:4001)
BHARTI
MSC
(PC:4005)
PSTN
Cloud
L-I
TAX BSNL
(PC:5000)
Routing and Charging Scenario in Present ( Pre MNP) Scenario
•Routing and Charging is done in Exchanges based on Dialed
Digits ( B Party Number)
• For Routing the Fixed to Mobile calls ROUTE CODES are
created in Xges
•Charging is also based on dialed digits.
•By analyzing the Dialed Digits ( B Party Number) in exchanges it
is possible to route the code to corresponding MSC/ Landline
Xge( for further routing to corresponding MSC)
•First 2 or 5 Digits (2 Digits Access Code + 3 Digit MSC code) of a
mobile number determines the Mobile operator of the number.
Routing and Charging Scenario in Post MNP Scenario
Issues:
•In exchanges it would not be possible to route the Fixed to
Mobile call to corresponding MSC by analyzing the Dialed Digits
( B Party Number) , because now any Mobile number can
belong to any Operator in the Service Area.
•Mobile number no longer determines the Mobile operator of
the number.
•As per DOT guidelines determination of correct Terminating
Mobile Operator is the responsibility of the Originating
Operator.
What is required to solve the problem:
Issues:
1. Getting information for determining present operator of the
Mobile Number
2. Using this information to determine correct Routing and
Charging in the exchanges.
What is required to solve the problem:
Solution: Getting the extra ROUTING information
• This extra information will be provided by the Route Number
given by the DOT to each operator (one for GSM network and
one for CDMA network).
•RN for each Mobile Number will be stored in one central
Database (NPDB).
•Associated RN of each Mobile Number will determine the
present operator of the number.
•This RN changes when a mobile number is ported to other
Mobile Operator.
What is required to solve the problem-contd:
Solution: Getting the extra information
• These NPDB will be integrated with SSTP
•SSTP will intercept IAM (Initial Address Message) passing
through it and will scan the B Party Number.
•SSTP will get the appropriate RN for the B party number
(retrieved from IAM) from integrated NPDB
•SSTP will prefix the RN with B party number in the IAM and
send it to next destination.
What is required to solve the problem-contd:
Solution: Using the extra information
• RN codes need to be created in exchanges.
• CCS 7 messages related to Fixed to Mobile Calls need to pass
through SSTP network, at least once, before call is handed over
to corresponding MSCs.
•Determination of corresponding MSC ,where call can be
routed, is based on RN.
Logical Connectivity of Exchanges with SSTP
Routing and Charging of Mobile Calls in Pre MNP ScenarioRouting of calls from local Xge to L-II TAX
PSTN
Cloud
L-II TAX
PC:4000
LEX
PC: 2000
SSTP
Routing and Charging of Mobile Calls in Post MNP ScenarioRouting of calls from local Xge to L-II TAX
L-II TAX
PC:4000
LEX
PC: 2000
SSTP
PSTN
Cloud
s
SSTP
Route Number Solution
Centralized Solution
Operator 1
NP Database
Operator 2
NP Database
NPAC
NP
Database
Operator 3
NP Database
N
Operator 4
NP Database
•Central Database containing the information of association of each mobile
number with Mobile Service Operator
•Each Operator has been given two unique 4 digit Number( one for GSM and
one for CDMA operator) called Routing Number(RN)
•Number is called Routing Number as it is used to route the call to correct
Service Provider
Flow of RN from NPDB to PSTN Exchanges
SSTP Cloud
CCS-7 Links
RN
PSTN Cloud
NPDB
Physical Connectivity of Exchanges with SSTP in Post MNP and Call Flow
1. IAM message is tunneled
through the permanent C-7
connection from L-II TAX to SSTP
2. RN is retrieved by
SSTP from NPDB
NPDB
RN(BHARTI
GSM)=5555
9444923456
Trunk
Group
C7 link
LEX
PC: 2000
Voice Path
C- 7 HSL
connectivity
Nailed Up C7 Connection
L-II TAX
5. A new IAM is formed by L-II TAX
based on the Routing Table and RN
information
6. IAM is sent to corresponding MSC
C7 link
CH
i
CH
i
CH
i
C4
i
CH
ii
CH
CH iin IAM is
3. B number
replaced by RN+B
4. Modified IAM is sent
towards L-II TAX
SSTP
BHARTI
MSC
(PC:4005)
7. MSC checks whether
the RN is same as Home
RN, if yes, call proceeds
otherwise call is rejected
PSTN
Cloud
Before MNP: Voice and Signaling Path for Fixed to Mobile Calls
SDCA-B
SDCA-A
SDCA-C
BSNL/Pvt.
Operators
CMSP
Network
SDCA-D
Level-II
TAX
Local cum
Tandem Exch.
BSNL PSTN
Network
LDCA
Voice Path
Signaling Path
After MNP: Voice and Signaling Logical Path for Fixed to Mobile Calls
SDCA-B
SDCA-A
SDCA-C
BSNL/Pvt.
Operators
CMSP
Network
SDCA-D
Level-II TAX
Local cum
Tandem Exch.
SSTP/LPDB
BSNL PSTN
Network
LDCA
Voice Path
Signaling Path
Note: The connectivity between local exchanges and
SSTP may be established by creating NUC(Nailed Up
Connections) at TAX.
Prerequisites
•All Level-II to Level I C-7 Traffic already shifted to SSTP
Network
•All Level-II to Level II C-7 Traffic already shifted to SSTP
Network
•No CMTS POI at Local Exchanges
Issues in CDR Billing Project
Post MNP, RN Information will be available only in L-II /L-I TAX s not in
Local Exchanges.
For implementing Deferential charging in Retail Billing RN information
must be available in CDRs of Local Exchanges.
One of the method is to take Fixed to Mobile calls CDRs from L-II TAX and
use it for retail billing along with the CDRs generated at Local Exchanges
The above method requires major changes in software and Hardware of
Retail Billing Servers of CDR project.
Solution Finalized:
One of the alternative method is to use Charge Band Number captured in
CDRs of Local Exchanges, for determining the Intra and Inter operator call
As the CHB number captured in the CDRs of Local Exchanges will be different
in case tariff for intra BSNL and inter operator calls is different
Though CHB No information is captured by all NT switches but not by C-DOT
switches
One Patch for capturing the CHB No in CDRs of C-DOT exchanges has been
got developed
This patch is to be loaded in all C-DOT exchanges before they come under
CDR Billing Project
For SSAs already under CRD project, necessary instructions are to be issued
by IT Cell, CO/ITPC.
Responsibilities
Monitoring of Implementation and to ensure completion
of work as per schedule
Co-ordination between Wire line and Mobile Group
Interaction with HO
Holding Internal Meetings with SSA and finalization of
plan
Loading of C-DOT patch based on CDR Billing Rollout Plan
IMPLEMENTATION OF MNP IN BSNL WIRE LINE NETWORK
•
All PSTN switches in all Circles are also required to be complaint with MNP
regime for Fixed to Mobile Calls.
•
In first Phase MNP is to be implemented in 4 metros and all 5 “A” category LSAs – 9 LSAs
in total.
In second phase – “B” and “C” category Circles.
Deadline: 31.03.2010.
“IAM Relay” method is used for implementing MNP in BSNL.
The Scope of MNP implementation in Wire Line PSTN network covers following network
elements/platforms:
a) Wire Line Switches for handling Fixed to Mobile Calls.
b) Wire Line ILD Switches for handling Fixed to Mobile incoming ISD
calls.
c) Wire Line IN platform for handling Fixed to Mobile call for various IN
Services e.g. VCC,FPH,FLPP etc.
•
•
•
•
NOTE ON IAM RELAY METHOD
• In IAM Relay method SSTP must intercept all IAMs for fixed to mobile calls
originating from local exchanges and prefix the RN number with B party
number in the IAM before sending the same to Level-I/II Taxs/Tandems.
• This RN+B number information used by Level I/II Taxs/Tandems to route
the call to correct service provider.
• Necessary creation of routing and charging information is required to be
done at Level I/II Taxs.
• This method requires connecting all the local exchanges with SSTP.
• Since availability of limited ports in SSTP network and large number of
local exchanges in BSNL networks, hence it has been decided only few
new technology local exchanges
For ISD Incoming Calls to be terminated on Mobile
Network.
• All ILD Gateways route their traffic to respective L1 Tax's via SSTP only.
• IAM of such calls will be relayed by SSTP after prefixing the appropriate
RN+B number.
• Calls with RN+B will be analyzed by L1 Tax's and will be routed to
respective MSCs.
For handling Fixed to Mobile Calls for various IN
Services e.g. VCC, FPH, FLPP etc.
•
For handling prepaid IN calls like VCC, FLPP, ACC ,FLPP etc,SSP functionality of only local
exchanges can be used so that only IAM is intercepted before calls enter into the Lev
II/Tandems having POI connectivity.
•
Hence all field units should ensure local exchanges connecting to SSTP are upgraded for SSP
functionality.
•
Implementing MNP in Postpaid IN Services such as FPH, UAN, VPN etc, mapped number in
SCP is to be defined with RN+B (in case translated number is mobile).
•
In few cases (where all local switches are CDOT technology) which can’t be used for SSP
functionality and only SSP functionality of LEV II tax is available then all intra circle Fixed to
Mobile-IN Prepaid traffic may be routed to respective Lev I Tax.
•
Necessary re-dimensioning of Poi's at Lev I Tax to be taken care off.
VCC(VIRTUAL CALLING CARD)
Origination customer has to be BSNL / MTNL only.
Termination can be any operator customer.
Customer dials 1802-425.
SCP will play announcement to dial the card no.
Once the 15 digit card no is entered and verified , announcement is played
to dial the destination No.
Destination no dialed is 9449828818 which is a ported no in NPDB.
CIC
|
|
•
SSP ----------- SCP--------- SSP ------ Tandem------ SSTP---------- TAX--- MSC
1802-425-15 digit Card no.
C-9449828818
9449828818
55559449828818
(In PREA 15 TRAD 6, PRE = C944982
RCE=2) Analysis 944982 to opened in TRAD 6
And routed to TAX with PTX=0 and FITX
To be given towards TAX ACH (new).
FPH (Free Phone Call) Requirement.
Originating customer can be any operator.
Terminating customer is only BSNL/MTNL
RN Value for BSNL – 5555
RN Value for MTNL – 4444
SSP ------------ SCP
Customer dials 1800-425-2222
SCP ------------ SSP
This 2222 is mapped to C-5555-9449828818 at SCP and forwarded to SSP.
SSP will strip off C and forward rest of the digit to Tandem.
___________________CIC__________________________
|
|
SSP ------------ Tandem -------------- SSTP------------ TAX
IAM (Called No-55559449828818)
|----------------------------Signaling----------------------------------|
SSP --------------------------------------- SSTP -------------- TAX ------- MSC
IAM (Called No - 55559449828818)
Now SSTP should be transparent to forward the same to the TAX, since RN is already prefixed
by SCP.
UAN call within Local Exchange
Fixed Charging
In this scenario Customer dials Service access code 1860425+ 4 digit code
(Code can be 0000 to 4999 any number). This 4 digit code is mapped with a
mobile number with RN prefixed, Eg - 55559449828818.
When customer dials the access code in return SCP returns C+RN+DN
(C55559449828818) to SSP with charge band.
SSP -------------------------> SCP
18604252222
SSP ------------------------- SCP
C55559449828818 + Charge Band
Calling party is charged 30sec pulse.
Called party is not charged.
Split Charging
In this scenario Customer dials Service access code 1860425+ 4
digit code (Code can be 5000 to 9999 any number). This 4 digit
code is mapped with a mobile number with RN prefixed, Eg 55559449828818.
When customer dials the access code in return SCP returns
C+RN+DN (C55559449828818) to SSP with charge band.
SSP -------------------------> SCP
18604252222
SSP ---------------------- SCP
C55559449828818 + Charge Band
Calling party is charged 180sec pulse.
Called party is charged as per STD charges
Thank you