Slides-IT2-OperMaintenance4-14-02
Download
Report
Transcript Slides-IT2-OperMaintenance4-14-02
Introduction
Itemiser2 Maintenance Course
Objectives
Trace Detection
ITEMISER2 Overview
Log-on and Calibration
Shift Maintenance
Weekly Maintenance
Monthly Maintenance
Questions and Comments
Trace Detection
Traces are microscopic
amounts of particles and vapor
Traces are transferred to
objects and people
The Itemiser2 can detect traces
to a billionth of a gram, or, a
grain of salt cut into 1000
pieces
Trace Detection
Itemiser2 Sampling Demonstration
Trace Detection
Review
What are explosive traces?
How are explosive traces
transferred?
How can you describe a
billionth of a gram?
How do you know when the
Itemiser2 detects explosive
traces?
Itemiser2 Overview
Sample Trap Holder
Display Screen
Desorber
Printer
Itemiser2 Overview
Status Indicator
Function
Buttons
List of
Substances
Select Scan Display Screen
Software Version
Itemiser2 Overview
Plasmagram
Substance
List
Plasmagram Display Screen
Itemiser2 Overview
Review
Which Itemiser2 component
heats the sampling trap?
Which display screen highlights
a detected substance in red?
What do the colors of the status
indicator mean?
Which display screen shows a
snapshot of the last sample?
How can you tell which version
of software you are running?
Log-on and Calibration
Log-on Demonstration
Log-on and Calibration
What is Calibration?
Calibration introduces a
known substance into
the system.
After the Itemiser2
identifies the substance,
the software adjusts the
positions for all the other
programmed substances.
Calibration can be
affected by changes in
temperature,
atmospheric pressure,
and humidity.
Log-on and Calibration
Calibration Demonstration
Log-on and Calibration
Review
What are the different log-on
numbers and their levels?
Why do you calibrate the
Itemiser2?
Which traps do you use to
calibrate the Itemiser2?
The calibration peak is normally
found between which two
numbers?
How often should you calibrate
the Itemiser2?
Shift Maintenance
Calibrate
Clean Fan Filter
Check Printer Paper
Check Supplies
Decontaminate Work Area
Record keeping
Shift Maintenance
Shift Maintenance Demonstration
Weekly Maintenance
Perform Shift Maintenance
Power Down Unit
Clean Desorber
Inspect Filter
Clean Sample Air Line
Clean Membrane
Calibrate
Record keeping
Weekly Maintenance
Weekly Maintenance Demonstration
Monthly Maintenance
Power Down Unit
Perform Weekly Maintenance
Change Dryer
Inspect Dopant
Change Membrane
Calibrate
Record keeping
Monthly Maintenance
Monthly Maintenance Demonstration
Course Review
Trace Detection
ITEMISER2 Overview
Log-on and Calibration
Shift Maintenance
Weekly Maintenance
Monthly Maintenance
Questions and Comments
Detector Schematic