Transcript DeltaV Engineering Tutorial

DeltaV Operation,
Operate
This tutorial will demonstrate how to
open an experiment, make
configuration changes and download.
DeltaV Operation,
Operate
Open the DeltaV Explorer
Go to the Start >
Engineering >
DeltaV Explorer >
DeltaV Operation,
Operate
• The DeltaV Explorer is the main utility used
to initiate changes to the control algorithms
and physical hardware.
• In our case we will be using the Explorer to
open each experiment with the “Control
Studio”. Our experiments are under
“AREA_A”
• Example: Open LAB1, Right click:
• DeltaV configuration is “Object
Oriented”,similar to Simulink.
• The toolbar on the left side is the pallet of
control functions or objects
• Select the object of interest by left click
• The list in the lower right details all the
parameters for each object.
• Example LI1-1 has a X_SCALE or field
scale of 0 to 20 inH2O (68 DegF)
If you want to know what the object is, right click and select
What’s this? You will the be able to gain access to the Help Files.
• In this lab, we will be doing software wiring
or connecting objects
• To wire, left click on the object’s connection
terminal and drag the wire to the other
terminal
Wire Here
• Once the change is made, we need to
“Download”, but save first then Download
Save then Download
Select Download Now
Next it will ask you if this is what you want to do for sure,
Keep on saying Yes …
Dunkin is now doing his thing and we are downloading, click OK here
Congratulations! You have finished Downloading!