Transcript Pump ZPU 01 / 02

Pump ZPU 01 / 02
High Pressure Lubricating Pump
Type ZPU 01 / 02
W83-A-0501
1
Pump ZPU 01 / 02
Technical Data
Pump Type ZPU 01 / 02
Number of pump elements
Threaded connection
Operating pressure max.
Suitable lubricants
Lubricant output
Ratio
Rated speed of drive
Reservoir size
W83-A-0501
1 or 2
Version "E": G¼"i
Version "V or F": for tube dia. 10 mm or G⅜"i
300 bar
Grease up to NLGI class 2, NLGI class 3 on request
Mineral oil with a viscosity of min. 20 mm²/s
800 cm³/h per pump element
1 : 100
1360 rpm at 50 Hz, 1634 rpm at 60 Hz
10 or 30 dm³
2
Pump ZPU 01 / 02
Identification Code
W83-A-0501
3
Pump ZPU 01 / 02
Identification Code
W83-A-0501
4
Pump ZPU 01 / 02
Standard Motors
Multi-range motor
Electrical: 220/380 V /50 Hz to 480 V / 60 Hz
Single voltage motor
Electrical: 290/500 V 50 Hz
Power P
Frequency f
RPM
Protection:
Insulation class:
0,18 0,21 kW
50
60 Hz
1370 1640 rpm
IP 55
F
For further details see motor data sheet
W83-A-0501
5
Pump ZPU 01 / 02
Design
1 - Housing
2 - Reservoir
3 - Stirring paddle with scraper
4 - Eccentric shaft
5 - Pump element
6 - Worm gear motor
W83-A-0501
6
Pump ZPU 01 / 02
Pump Element Assembly & Disassembly
1 - Check valve
2 - Blind element
3 - Delivery piston
5 - Single element
W83-A-0501
Video
7
Pump ZPU 01 / 02
Pump Element Assembly & Disassembly
Remove delivery piston
Pump element inserted
Insert pump element
Incorrect assembly
Attention: If the pump element is not mounted correctly, the delivery is not
possible. The pump may be damaged!
W83-A-0501
8
Pump ZPU 01 / 02
Low-level for Grease
Old Version:
New Version:
Intermittent (low-level)
Ultra-sonic sensor
(low and/or full level control)
1 - Reservoir
2 - Stirring paddle 3 - Magnetic switch
4 - Fixed paddle 5 - Magnet
6 - Guide plate
A = 2+1 mm
W83-A-0501
9
Pump ZPU 01 / 02
Low-level for Oil
Old Version:
Float switch
New Version:
Ultra-sonic sensor
W83-A-0501
10
Pump ZPU 01 / 02
 Pump is suitable for progressive or two-line systems
 Design is similar to Pump 215
 Pump has 1 or 2 elements - delivery per element = 800 cm³/h
 For two-line systems - pump run time should be < 20 min.
 Multi-range motor
W83-A-0501
11