Transcript Setting Out Rods - The Jo Richardson Community School

Edexcel Level 2
BTEC Extended Certificate in
Construction
Unit 8
Exploring Carpentry and Joinery
Name:
Academic Year:
Jo Richardson Community School
Performing Carpentry Operations using Hand tools
In your practical sessions, you will be given a number of tasks involving wood joints.
Below, identify and explain the use of hand tools and equipment used to perform carpentry and joinery tasks.
Hand Tool
Picture
Description of how it is used
Pencil
Steel Rule
Tri-square
Marking Gauge
Wooden Mallet
Bevel-Edged
Chisel
Tenon Saw
Name:
Jo Richardson Community School
BTEC First Diploma in Engineering
Unit 1:Exploring Carpentry and Joinery : Materials, Tools and Equipment
Assignment No:1
Task:1a
Grading Criteria: P1
Performing Carpentry Operations using Hand tools
In your practical sessions, you will be given a number of tasks involving wood joints.
Below, identify and explain the use of hand tools and equipment used to perform carpentry and joinery tasks.
Hand Tool
Picture
Description of how it is used
Combination Square
Marking Knife
Mortice Gauge
Sliding Bevel
Claw Hammer
Mortice Chisel
Wheel Brace
Bradawl
Hand Screwdrivers
Bench Holdfast
Jack/Plough/Block
Plain
Name:
Jo Richardson Community School
BTEC First Diploma in Engineering
Unit 1:Exploring Carpentry and Joinery : Materials, Tools and Equipment
Assignment No:1
Task:1a
Grading Criteria: P1
Handling Materials, Tools and Equipment
Using the information you have collected from Task 1a, demonstrate that you can identify and explain the use of hand tools and
equipment used to perform carpentry and joinery tasks.
Name:
Jo Richardson Community School
BTEC First Diploma in Engineering
Candidate No:
Unit 7 : Exploring Carpentry and Joinery: Materials, Tools and Equipment
Assignment No: 1
Task: 1b
Grading Criteria: P1
Requisition Orders
Complete three requisition orders for hand tools, equipment and PPE needed to perform given carpentry and joinery tasks.
1,……………………………………………………..
2,……………………………………………………..
3,……………………………………………………..
Name:
Jo Richardson Community School
BTEC First Diploma in Engineering
Candidate No:
Unit 7 : Exploring Carpentry and Joinery: Materials, Tools and Equipment
Assignment No: 1
Task: 1c
Grading Criteria: P2
Identifying Materials
In your practical sessions, you will be given a number of tasks involving wood joints.
Below, identify and explain the properties of materials used during a given carpentry and joinery exercise.
Material
Picture
Properties of Material
Name:
Jo Richardson Community School
BTEC First Diploma in Engineering
Unit 1:Exploring Carpentry and Joinery : Materials, Tools and Equipment
Assignment No:1
Task:1d
Grading Criteria: P3
Cutting List
Produce an accurate cutting list with all materials, quantities and dimensions needed to perform a given carpentry and joinery
task.
Name:
Jo Richardson Community School
BTEC First Diploma in Engineering
Candidate No:
Unit 7 : Exploring Carpentry and Joinery: Materials, Tools and Equipment
Assignment No: 1
Task: 1e
Grading Criteria: P4
Performing Carpentry Operations using Hand tools
In your practical sessions, you will be given a number of tasks involving wood joints.
Below, create a step-by-step diagram to demonstrate how you made the Lap Joints and The Housing Joint.
You must identify and justify the use of hand tools and materials safely to minimise health, safety and welfare risks.
Name:
Jo Richardson Community School
BTEC First Diploma in Engineering
Unit 1:Exploring Carpentry and Joinery : Materials, Tools and Equipment
Assignment No:1
Task:1f
Grading Criteria: M1
Minimising Health, Safety and Welfare Risks (Merit)
Demonstrate that you can select and justify the use of the correct tools, materials and PPE for a given task in an approved
manner to minimise health, safety and welfare risks.
Name:
Jo Richardson Community School
BTEC First Diploma in Engineering
Candidate No:
Unit 7 : Exploring Carpentry and Joinery: Materials, Tools and Equipment
Assignment No: 1
Task: 1g
Grading Criteria: M1
Applying Safe Working Practice
Demonstrate, through practical activity, that you can apply safe working practice and select the appropriate PPE when using
hand tools, equipment or workshop machines to perform a carpentry and joinery task.
Name:
Jo Richardson Community School
BTEC First Diploma in Engineering
Candidate No:
Unit 7 : Exploring Carpentry and Joinery: Health, Safety and Welfare Practices
Assignment No: 2
Task: 2a
Grading Criteria: P5
Applying Safe Working Practice
Demonstrate, through oral questioning, that you can identify safe working practice and select the appropriate PPE when using
hand tools, equipment or workshop machines to perform a carpentry and joinery task.
Name:
Jo Richardson Community School
BTEC First Diploma in Engineering
Candidate No:
Unit 7 : Exploring Carpentry and Joinery: Health, Safety and Welfare Practices
Assignment No: 2
Task: 2b
Grading Criteria: P5
Identify Risk and Hazards
Identify two potential hazards when using hand tools, equipment or workshop machines to perform a given carpentry and
joinery task and suggest the appropriate PPE control methods to minimise the risks.
1
JOB:
Name and Picture of Equipment,
Machinery or Tools
Identified Hazards
Level of Risk
Ways to Prevent Accidents
Identified Hazards
Level of Risk
Ways to Prevent Accidents
2
JOB:
Name and Picture of Equipment,
Machinery or Tools
Name:
Jo Richardson Community School
BTEC First Diploma in Engineering
Candidate No:
Unit 7 : Exploring Carpentry and Joinery: Health, Safety and Welfare Practices
Assignment No: 2
Task: 2c
Grading Criteria: P6
Applying Good Practice (Merit)
Photographic record with annotations explaining safe working practice and use of PPE when using hand tools, equipment or
workshop machines to minimise health, safety and welfare risks.
Photo of Practical Task
Name and Picture of Equipment,
Machinery or Tools
Identified Hazards
Description of Practical Activity
Name:
Jo Richardson Community School
BTEC First Diploma in Engineering
Candidate No:
Unit 7 : Exploring Carpentry and Joinery: Health, Safety and Welfare Practices
Assignment No: 2
Task: 2d
Grading Criteria: M2
Setting Out Rods
Physical evidence of a third angle orthographic produced as a rod for marking out work ready for manufacture.
Photo of third angle orthographic projection
Name:
Jo Richardson Community School
BTEC First Diploma in Engineering
Candidate No:
Unit 7 : Exploring Carpentry and Joinery: Carpentry and Joinery Skills
Assignment No: 3
Task: 3a
Grading Criteria: P7
Setting Out Rods
Photographic evidence with annotations showing the use of a setting out rods for marking out work.
Photographic evidence
Photo of Practical Task
Photo of setting out rod
Description of Practical Activity
Name:
Jo Richardson Community School
BTEC First Diploma in Engineering
Candidate No:
Unit 7 : Exploring Carpentry and Joinery: Carpentry and Joinery Skills
Assignment No: 3
Task: 3b
Grading Criteria: P7
Set out and Cut Joints in Timber
In your practical sessions, you have been given several wood joints to practice.
Below, discuss the selected wood joint. Include diagrams, pictures, practical uses, tools, safety, materials, PPE etc…
Half Lap Joint
Name:
Jo Richardson Community School
BTEC First Diploma in Engineering
Candidate No:
Unit 7 : Exploring Carpentry and Joinery: Carpentry and Joinery Skills
Assignment No: 3
Task: 3c
Grading Criteria: P8
Set out and Cut Joints in Timber
In your practical sessions, you have been given several wood joints to practice.
Below, discuss the selected wood joint. Include diagrams, pictures, practical uses, tools, safety, materials, PPE etc…
Housing Joint
Name:
Jo Richardson Community School
BTEC First Diploma in Engineering
Candidate No:
Unit 7 : Exploring Carpentry and Joinery: Carpentry and Joinery Skills
Assignment No: 3
Task: 3c
Grading Criteria: P8
Set out and Cut Joints in Timber
In your practical sessions, you have been given several wood joints to practice.
Below, discuss the selected wood joint. Include diagrams, pictures, practical uses, tools, safety, materials, PPE etc…
Dovetail Joint
Name:
Jo Richardson Community School
BTEC First Diploma in Engineering
Candidate No:
Unit 7 : Exploring Carpentry and Joinery: Carpentry and Joinery Skills
Assignment No: 3
Task: 3c
Grading Criteria: P8
Set out and Cut Joints in Timber
In your practical sessions, you have been given several wood joints to practice.
Below, discuss the selected wood joint. Include diagrams, pictures, practical uses, tools, safety, materials, PPE etc…
Through Mortice and Tenon Joint
Name:
Jo Richardson Community School
BTEC First Diploma in Engineering
Candidate No:
Unit 7 : Exploring Carpentry and Joinery: Carpentry and Joinery Skills
Assignment No: 3
Task: 3c
Grading Criteria: P8
Set out and Cut Joints in Timber
In your practical sessions, you have been given several wood joints to practice. Below, Identify tools and materials used to
accurately mark out, cut and form four common wood joints.
Wood Joint
Material
Name:
Jo Richardson Community School
BTEC First Diploma in Engineering
Tools Used
Example of a product
that uses this wood
joint
Candidate No:
Unit 7 : Exploring Carpentry and Joinery: Carpentry and Joinery Skills
Assignment No: 3
Task: 3d
Grading Criteria: P8
Set out and Cut Joints in Timber
In your practical sessions, you have been given several wood joints to practice. Demonstrate, through practical activity, that you
can accurately mark out, cut and form four common wood joints.
Name:
Jo Richardson Community School
BTEC First Diploma in Engineering
Candidate No:
Unit 7 : Exploring Carpentry and Joinery: Carpentry and Joinery Skills
Assignment No: 3
Task: 3e
Grading Criteria: P8
Set out and Cut Joints in Timber
Photographic evidence with annotations showing a range of common wood joints cut and formed to produce a simple timber
product to an acceptable industrial standard.
Photo of Practical Task
Wood joints cut
Description of Practical Activity
Name:
Jo Richardson Community School
BTEC First Diploma in Engineering
Candidate No:
Unit 7 : Exploring Carpentry and Joinery: Carpentry and Joinery Skills
Assignment No: 3
Task: 3f
Grading Criteria: P9
Set out and Cut Joints in Timber
Demonstrate, through practical activity, that you can accurately mark out, cut and form a range of common wood joints to
produce a simple timber product to an acceptable industrial standard.
Name:
Jo Richardson Community School
BTEC First Diploma in Engineering
Candidate No:
Unit 7 : Exploring Carpentry and Joinery: Carpentry and Joinery Skills
Assignment No: 3
Task: 3g
Grading Criteria: P9
Demonstrating Good Quality Practical (Merit)
Demonstrate, through practical activity, that you can accurately mark out, cut and form all carpentry and joinery tasks to a good
industrial standard with a tolerance of + or - of 3mm.
Name:
Jo Richardson Community School
BTEC First Diploma in Engineering
Candidate No:
Unit 7 : Exploring Carpentry and Joinery: carpentry and joinery skills
Assignment No: 3
Task: 3h
Grading Criteria: M3
Demonstrating High Quality Practical (Distinction)
Demonstrate, through practical activity, that you can accurately mark out, cut and form all carpentry and joinery tasks to a high
industrial standard with a tolerance of + or - of 1mm .
Name:
Jo Richardson Community School
BTEC First Diploma in Engineering
Candidate No:
Unit 7 : Exploring Carpentry and Joinery: carpentry and joinery skills
Assignment No: 3
Task: 3i
Grading Criteria: D1