Conversion - Honeywell Integrated Security
Download
Report
Transcript Conversion - Honeywell Integrated Security
Conversion Solutions
Easy, inexpensive solutions for converting analog to
digital and upgrading Wiegand to WSE
1
Introduction
2
Conversion Solutions advantage
Conversion Solutions products
Conversion Solutions configurations
Conclusion
What is Conversion Solutions?
Advantage
Easily convert Schlage Electronics and Westinghouse
analog systems to advanced digital technology
Upgrade from Wiegand to WSE digital
Maintain current investment in access control
technology
Easy, inexpensive, fast conversion
Get the benefits of digital technology
3
The advantages of WSE digital 1 of 2
Advantage
More convenient access
Longer read ranges
Faster read times
More secure and flexible
Multiple technology support
More convenient card
options
Multiple-technology
Badge
Key Fobs
Inventory control tags
Less expensive cards
4
The advantages of WSE digital 2 of 2
Advantage
Faster, more dependable
control
32-bit technology
Easier, more expansive
installation and expansion
4,000 foot wire runs
between controller
and reader
Daisy chain
components
Less expensive
30% plus cheaper
5
Choice of solutions for specific applications
Products
NexLine coax adapter
which allows the transfer of both power and data over coax
NexLine Plus
is an MSM replacement that converts four MSM points to
4-state RS-485
NexStar S-Net multiplexer
converts home-run wiring to S-Net protocol
Wiegand Interface Unit w/ DR 4205W
Upgrade Wiegand to WSE
Maintain Wiegand physical interface
6
NexLine Coax Adapter
Products
Converts coaxial wire runs
to twisted pair
Use existing coax in digital
network
Transfers power and data
over coax
Saves time and money
Simple installation, install
on both ends of coaxial
run
Combine multiple S-Net
runs with NexStar
7
NexLine Plus coax adapter/MSM replacement
Products
8
Uses existing coaxial
cable and monitor point
wire
Replaces MSM removed
during conversion process
Monitors point signals
between four monitor
inputs and a NexSentry
Controller
Supports the already
installed monitor point
wires
Reliable transfer of power
and digital data over coax
Simple installation
NexStar S-Net multiplexer
Products
Link between access
control unit and multiple
S-Net runs
Use existing coaxial cable
to connect digital readers
and other S-Net devices
Upgrade Wiegand system
to WSE digital
Uses existing wiring to
multiplex into home run wiring
scheme
9
Allows home run wiring to
connect between S-Net
devices and a controller
Repeater function allows
4,000 ft. plus wire run
NexSentry WIU • Wiegand Interface Unit
w/ DR 4205W Wiegand Proximity Reader
Products
Use existing wiring and
physical interface protocol
in upgrade to WSE digital
Supports 26- and 34-bit 5wire Wiegand protocol
Interfaces between one
controller and four DR
4205s
DR4205W DigiReader,
WSE proximity with up to
six inch read range
Easy installation
10
Easiest analog to digital conversion
Configuration
11
808S to NexSentry 4100
Configuration
12
808S to NexSentry 4100, keeping alarms
Configuration
13
Upgrading Wiegand to WSE Wiegand
Configuration
14
Upgrading Wiegand to WSE S-Net
Configuration
15
Conclusion
Easiest analog to digital conversion
Maintain current investment in access control system
Use existing coax
Use existing components
Gain benefits of WSE digital
Easy installation
Inexpensive
16
The future of access control