Transcript LoadingAsterisk_NERev_3_25_13 - Interop

Loading Asterisk
Boot Sequence
1. Tap <F2> on your Keyboard to Enter
Setup.
2. Select Boot Sequence
Boot Sequence
1.
2.
Make sure that the CD-Rom is first in the boot
Sequence.
If not use the + - to move it to first
Loading Asterisk
Select Option 2 and hit Enter Which will install Asterisk 1.8
ONLY
Disk Partitions
From the drop down Select Remove all partitions on
Selected drives and create default layout
Disk Partitions
Click YES to remove All Partitions
Time Zone
Select Chicago from the Drop down which will put you in
the central Time zone
Password
Enter a password that will be remembered
Format
The system is now formatting the disk
Install Asterisk
The system is now Installing
Installation Complete
Remove the CD from the drive and click reboot
Configure IP Address
1.
2.
3.
4.
After the reboot the system will take you to the following menu
If you don’t select an item you will go right to the Linux Prompt
If you miss this screen, logon using user=root and the password
Type setup and you will get to this screen
Configure IP Address
1.
2.
Select Network Configuration
Tab down and hit enter on Run Tool
Configure IP Address
Select eth0 and hit enter
Configure IP Address
Select Edit Devices and hit Enter
Configure IP Address
Tab down to Use DHCP and hit the space bar to take the
asterisk out and configure a Static IP
Configure IP Address
1.
2.
3.
Tab to - Enter Static IP
Tab to - Enter Netmask
Tab to - Enter Default Gateway IP and tab to OK and click enter
Configure DNS
Using the arrow key select Edit DNS Configuration
and hit enter
Configure DNS
1.
2.
3.
Enter the hostname
Enter Primary DNS Usually the Paraclete App Server address is
the DNS Server
Click OK
Configure DNS
Click Save & Quit
Reboot
1.
2.
If not already logged on Enter User and Password and
Log on.
Type reboot at the command prompt