Transcript TIRF Microscope Total Internal Reflection and Evanescent light

NEU259
Advanced Light Microscope
Techniques
Hiroyuki Hakozaki
National Center for Microscopy and Imaging Research
University of California, San Diego
Total Internal Reflection Fluorescence
(TIRF) Microscope
•
Total Internal Reflection
– Oil to Air : Critical Angle = 41 degree
– Oil to Water : Critical Angle = 61 degree
– Oil to Glycerol : Critical Angle = 78.5 degree
Snell’s Law
90
TIRF Microscope
• Total Internal Reflection and Evanescent light
– Refractive Index of Sample need to be smaller than
objective lens immersion
• Optics
– Using edge of NA to get TIR angle
– Move spot at back focal of
objective lens to control TIR angle
and illumination depth
TIRF Microscope:Image
TIRF Microscope: Summary
• Using evanescent light coming out from Total Internal reflection
to illuminate fluorescence dye
• Product:All major microscope company has TIRFM
• Advantage
– Illuminate only 100nm from cover-glass surface.
– Z Resolution is better than confocal microscope (500nm)
– Less cell damage because of limited excitation area
– Less Background – High sensitive imaging.
• Disadvantage
– Imaging area is limited to cover glass surface.
• References
– Cell-substrate contacts illuminated by total internal reflection
fluorescence. Axelrod D. Cell Biol. 1981 Apr;89(1):141-5.
PALM/STORM
•
•
•
•
•
PALM : Photoactivated Localization Microscope
fPALM : Fluorescence Photoactivation Localization Microscope
STORM : Stochastic Optical Reconstruction Microscope
dSTORM : Direct STORM
Use localization of single fluorophore to break diffraction limit.
PALM/STORM
• Precision of localization of each
dye is much better - ~20nm than optical resolution - ~200nm.
• Activate one dye at a time and measure
dye position by PSF, you can separate
two dyes which distance is less than
optical resolution.
Optical
Resolution
Activate
one dye
Position Detection Precision
Optical Resolution
Activate
another dye
• Need to image single molecule fast to increase
performance.
- Require to use ~200mW laser
- Use TIRFM to increase signal detection efficiency
Localization Sequence
Activation Method : PALM
Eos
Dronpa
Activation Method : STORM
•
Combine two fluorophores to control activation
Cy3-Cy5 Combination
STORM Imaging Sequence
STORM Dye Combinations
Activation : dSTORM
•
•
Dye in Triplet state react with thiolate and form the radical anion of
fluorophore F* which has several second life time.
F* can be oxidized and recover singlet state to emit fluorescence again.
Fluorephore Sate Chart
Photo Induced Activation : dSTORM
•
Excite with UV light will bring dark state fluorophores into single state
Absorption Spectra of Alexa Fluor 488
Two Color Example
C, F: PALM Image
D: TIRFM Image
E: DIC Image
PALM, STORM, dSTORM: Summary (1)
•
•
•
•
Using Photo activated dye to get nano-meter spatial resolution.
Using TIRF or Near TIRF angle illumination to reduce background to
increase detection efficiency.
Product: Zeiss, Nikon, Leica
Advantage
–
–
–
–
•
Can get very high spatial resolution (~10-20nm) in 2D.
Can get high Z resolution (~60nm)
System will be cheaper than other high resolution product – half or less.
dSTORM technique allow to use existing Fluorophores.
Disadvantage:
– Long Exposure to get image (15-30min)
– Computation is required – not direct imaging.
– Differernt Analysis software can output different result.
– Need to evaluate system performance.
– Difficult to image multiple dye compare to confocal microscope
– Two Color PALM has been demonstrated – Eos & Dronpa
– STORM has advantage in multi color imaging compare to PALM.
PALM, STORM: Summary (2)
•
•
References
PALM
– Imaging Intracellular Fluorescent Proteins at Nanometer Resolution. Eric Betzig
et al. Science Vol. 313 15 September 2006 p1642-1645
– Dual-color super resolution imaging of genetically expressed probes within
individual adhesion complexes. H. Shroff et al. PNAS Vol.104 No.51 18
December 2007 p20308-20313
– Interferometric fluorescent super-resolution microscopy resolves 3D cellular
ultrastructure G. Shtengel et al. PNAS Vol.106 March 3 2009 p3125-3130
•
FPALM
– Ultra-high resolution imaging by fluorescence photoactivation localization
microscopy. S. T. Hess, Biophys J. Vol 91 (11) Dec. 2006 p4258-72
PALM, STORM: Summary (2)
•
•
References
STORM
– Sub-diffraction-limit imaging by stochastic optical reconstruction microscopy
(STORM) M. Rust et al. Nature Method Vol.3 No.10 October 2006 p793-795
– Multicolor Super-Resolution Imaging with Photo-Switchable Fluorescent Probes
M. Bates et al. Science Vol.317September 2007 p1749-1753
– Three-Dimensional Super-Resolution Imaging by Stochastic Optical
Reconstruction Microscopy B. Huang et al. Science Vol.319 February 2008
p810-813
•
dSTORM
– Photoswitching microscopy with standard fluorophores. S. van de Linde et
al. Appl. Phys. B Vol 93 2008 p725-731
– Direct stochastic optical reconstruction microscopy with standard
fluorescent probes. S. van de Linde et al. Nature Protocols Vol.6 No.7 2011
p991-1009
– 4D Super-Resolution Microscopy with Conventional Fluorophores and Single
Wavelength Excitation in Optically Thick Cells and Tissues. D. Baddeley et al.
PLoS One, Vol. 6 (5) 2011 e20645
4 Pi Microscope
•
Point Spread Function
– (a) Confocal Microscope (2Pi)
– (b) 4Pi Microscope (4Pi)
– (c) After deconvolution Process
Objective Lens (1)
Quartz
Glycerol
Sample
Quartz
Objective Lens (2)
4Pi Microscope: Image
4 Pi Microscope: Summary(1)
• Using two identical objective lens to double the NA. Try to use
entire solid angle = 4Pi to get higher resolution.
• Product:Leica 4Pi Microscope System - $1M
• Advantage
– Has better Z resolution than confocal microscope because of small
PSF.
– XYZ resolution is around 100nm in Z and 150nm in XY.
• Disadvantage
– Expensive
– Require special sample preparation
– Use quartz cover glass
– Need to put beads for each cover glass for PSF measurement
– Require special alignment to co-align two objective lens
– Require deconvolution process
4Pi Microscope: Summary(2)
• References
– Fundamental improvement of resolution with a 4Pi-confocal
fluorescence microscope using two-photon excitation. Stefan Hell et
al. Optics Communications 93 1992 p277-282
– Properties of a 4Pi confocal fluorescence microscope. Stefan Hell et
al. J. Opt. Soc. Am. A Vol. 19 No.12 p2159-2166
– Measurement of the 4Pi-confocal point spread function proves 75nm
axial resolution. S. W. Hell et al. Appl. Phys. Lett. 64(11), 14 March
1994 p1335-1337
Stimulated Emission Depletion (STED)
Fluorescence Microscope
• Making laser spot size – PSF - smaller by using
Depletion effect of fluorophore.
• Depletion
STED Concept
•
The Concept of Super Resolution with STED Microscopy
STED Resolution
• STED PSF : 97nm resolution in Z and 104nm in XY
• Confocal PSF : 490nm resolution in Z and 244nm in XY
STED Microscope: Image
STED Microscope: Summary (1)
•
•
•
•
Using fluorescence depletion to illuminate small spot to increase resolution
to 100nm.
Product:Leica STED System $1.3M
Advantage
– Can get high resolution (100nm) in 3D
– Combining with 4Pi, Z resolution can be 33nm
– No computation require to construct image
Disadvantage
– Expensive
– Difficult to image multiple dye
– Take long time to capture image. Not fast enough for live imaging.
– Demonstrated Video Rate STED at 60nm Resolution.
STED Microscope: Summay(2)
•
References
– Breaking the diffraction resolution limit by stimulated emission:
stimulated-emission-depletion fluorescence microscope. Stefan W. Hell
et al. Optics Letters Vol.19 No.11 June 1, 1994 p780-782
– Fluorescence Microscopy with diffraction resolution barrier broken by
stimulated emission. Thomas A. Klar et al. PNAS Vol.97 No.15 July 18
2000 p8206-8210
– Focal Spots of Size r/23 Open Up Far-Field Fluorescence Microscopy at
33nm Axial Resolution. Marcus Dyba et al. Physical Review Letters
Vol.88 No.16 22 April 2002 P163901
– Nanoscale Resolution in the Focal Plane of an Optical Microscope.
Volker Westphal et al. Physical Review Letters April 15 2005 Vol.94 No.14
p143903
– Video-Rate Far-Field Optical Nanoscopy Dissects Synaptic Vesicle
Movement. Volker Westphal et al. Science Vol320, P246 April 23, 2008
Structured Illumination Microscope
•
Use Moiré pattern effect to detect sub diffraction limit object
– Maximum illumination pattern frequency (Fi) is determined by NA Fimax = F0
– Detectable Moiré pattern frequency (Fd) is also determined by NA Fdmax = F0
– Moiré pattern frequency Fd = Fs – Fi (Fs is sample image frequency)
– Fs = Fi + Fd = 2F0 : Maximum detectable sample frequency is 2F0
– Structured Illumination improved resolution 2 times ~100nm
Moiré pattern
a: Sample Image
b: Illumination Pattern
c: Moiré pattern
Saturated Structured Illumination
(Non-Linear Illumination)
(A) Structured illumination without saturation
(B) Fluorescence emission saturation
(C) Structured illumination with saturation
(A)
(B)
(C)
Structured Illumination Microscope
•
Frequency Map
– a) Frequency of LM Original Resolution
– b) Structured Illumination Pattern
– c) Frequency Components
– Black : Original Frequency
– Dark Gray : Structured Illumination
– Light Gray : Saturated Structured Illumination
– d) Frequency of Structured Illumination
– e) Rotate illumination to cover frequency in all direction
Saturated Structure Illumination Image
•
Resolution Comparison
–
–
–
–
50nm Beads sample
b: Conventional Microscope
c: Structured Illumination w/o Saturation
d: Saturated Structure Illumination
3D Structured Illumination
•
3D Structured Illumination Pattern
– 100nm Lateral Resolution
– 270nm Axial Resolution
– Difficult to use Saturated Technique because of photo stability of dye
120nm Beads Image
Creating 3D Structured Illumination
3D Structured Illumination
•
Biological Sample Image
Structure Illumination Microscope:
Summary(1)
•
•
•
Use Moiré pattern to achieve sub diffraction limit resolution
Product:Applied Precision Inc OMX, Nikon, Zeiss, Leica
Advantage
– Can improve lateral and axial resolution 2 times from diffraction limit
– 100nm Lateral, 260nm Axial
•
– Can improve lateral resolution 4 times ~50nm by using non-linear
excitation
– Can image multiple dye easily
– Fast acquisition speed <10sec
Disadvantage
– Low resolution compare to localization microscope technique.
– Saturated Illumination require high photo stability and difficult to apply for
3D imaging
Structure Illumination Microscope: Summary
(2)
•
References
– Surpassing the lateral resolution limit by a factor of two using structured
illumination microscopy. M. G. L. Gustafsson Journal of Microscopy Vol.
198, Pt 2, May 2000, p82-87
– Saturated patterned excitation microscopy—a concept for optical resolution
improvement Rainer Heintzmann et al. J. Opt. Soc. Am. A Vol.19 No.8
August 2002 p1599-1609
– Nonlinear structured-illumination microscopy:Wide-field fluorescence
imaging with theoretically unlimited resolution. M. G. L. Gustafsson PNAS
Vol 102 2005 p13081-13086
– Three-Dimensional Resolution Doubling in Wide-Field Fluorescence
Microscopy by Structured Illumination M. G. L. Gustafsson et al. Biophysical
Journal Vol.94 June 2008 p4957-4970
– Subdiffraction Multicolor Imaging of the Nuclear Periphery with 3D
Structured Illumination Microscopy. L. Schermelleh et al. Science Vol.320
2008 p1332-1336
Optical Tweezers
(a) The larger momentum change of the more intense rays cause a net force to
be applied back toward the center of the trap.
(b) When the bead is laterally centered on the beam, the net force points toward
the beam waist.
Optical Tweezers: Optics
• IR laser is commonly used for not interfering with
observation wavelength. CW Nd:YAG Laser (1064nm) is
common for this application.
• Expand laser beam to fill back focal of objective lens to use
entire NA
• Dichroic mirrors to separate
observation light and laser.
• Position Detector to detect
beads displacement .
Optical Tweezers: Example (1)
• RNA polymerase Experiment by Dr. Steven Block, Stanford
University
• http://www.stanford.edu/group/blocklab/RNAP.html
Optical Tweezers: Expmale (2)
• Dr. Kazuhiko Kinosita at Waseda University
• http://www.k2.phys.waseda.ac.jp/Knotmovies/KnotDNA.htm
Optical Tweezers: Summary
• Hold object like tweezers by using laser light.
• Advantage
– Hold and Manipulate object that has different refractive index number
from medium
– Measure force by using trapping power
A few pN – 100pN. pN = 10-12 N
– Can manipurate more than two spot
• Disadvantage
– Can’t hold big object
– Can’t hold every object in cell because of refractive index of object
• References
– Observation of single-beam gradient force optical trap for dielectric
particles. A. Ashkin et al, Optics Letters, Vol. 11, No.5, May 1986
p288-290