Lab11 - 數位晶片設計實驗室
Download
Report
Transcript Lab11 - 數位晶片設計實驗室
Department of Computer Science and Information Engineering
National Cheng Kung University
Experiment on Digital System
Advanced Practice
2014-12-24/25
Digital Integrated Circuit Design Laboratory
Reference Links
Altera Quartus II Handbook
Altera Quartus II Web Edition - Free (Create a user account)
北瀚科技股份有限公司 SMIMS – FPGA Board
數位IC設計入門-Verilog,滄海書局,2008 (ISBN 978-986-6889-90-5)
2
Outline
Traffic Light System
Snake
Scrolling Text
LFSR
3
Department of Computer Science and Information Engineering
National Cheng Kung University
Traffic Light System
Digital Integrated Circuit Design Laboratory
Traffic Light System
Please use the following components:
3 LEDs (green, yellow, and red)
2 Seven-Segment Display
1 LED Dot Matrix Display
1 button
The layout:
5
Traffic Light System
LEDs :
Seven-Segment Display :
Count down from 13 to 1 when the LED is green or yellow, then
count down from 7 to 1 when the LED is red.
LED Dot Matrix Display :
10 seconds for green light, then 3 seconds for yellow, then 10
seconds for red light, and then back to green light.
Show img.1 when the LED is green or yellow
Show img.2 when the LED is red
Button :
img.1
img.2
Reset the system – LED green, Seven-Segment Display13, and
show img.2
6
Department of Computer Science and Information Engineering
National Cheng Kung University
Snake
Digital Integrated Circuit Design Laboratory
Snake
Please use 4 Seven-Segment Displays, 1 switch, and 1
reset button.
The layout is as follow:
8
Snake
The positive (switch = 0)movement of the snake is:
a0a1a2 → a1a2a3 → a2a3b3 → a3b3g3 → b3g3g2 → g3g2g1 → g2g1g0 →
g1g0e0 → g0e0d0 → e0d0d1 → ……..
The negative (switch = 1)movement is the reverse
direction.
When reset is pressed, the snake bake to the initial
state.
Reset state
9
Department of Computer Science and Information Engineering
National Cheng Kung University
Scrolling Text
Digital Integrated Circuit Design Laboratory
Scrolling Text
Please use 3 LED Dot Matrix Displays, 1 switch, and 1
reset button.
The layout is as follow:
11
Scrolling Text
The text pattern are :
The text scrolls to left when switch is 0, and scrolls to
right when switch is 1.
When reset is pressed, the test bake to the initial state.
Reset state
12
Department of Computer Science and Information Engineering
National Cheng Kung University
LFSR
Digital Integrated Circuit Design Laboratory
LFSR
LFSR (Linear-feedback Shift Register) can be used as a
random integer generator in hardware design.
The architecture of LFSR could be described as
shift registers, and there exists an extra feedback wire.
14
LFSR
In this exercise, the feedback is Q[0] xor Q[3], and the
initial state of the registers are all 1.
Please complete a random generator based on the
architecture above.
15
LFSR
Please use 2 Seven-Segment Displays, and 2 buttons
(one for reset and another for generating a number).
The layout is as follow:
When reset is pressed, show 00 and assign 1 to the all
registers.
When generate is pressed, show the random number.
16
Department of Computer Science and Information Engineering
National Cheng Kung University
Appendix
Digital Integrated Circuit Design Laboratory
Dot Matrix
The dot matrix is controlled by 8 column lines and 8
row lines.
When the column line and the row line are both 1, the
dot will be turned on.
0 0 0 0 0 0 0 0
0
0
0
0
0
0
0
0
0 0 1 0 0 0 0 0
0
0
0
1
0
0
0
0
18
Dot Matrix
Scan the rows frequently, and control the column lines,
the image could be showed by Persistence of vision.
0 0 0 1 1 0 0 0
1
0
0
0
0
0
0
0
0 0 1 0 0 1 0 0
→
0
1
0
0
0
0
0
0
0 1 0 0 0 0 1 0
→
0
0
1
0
0
0
0
0
1 0 0 0 0 0 0 1
→
0
0
0
1
0
0
0
0
→…
=>
19
Notice
wire and reg type define
always begin …裡面變數… end ,宣告 reg type
always begin …… end 外面變數,宣告 wire type
需搭配 assign 使用
reg == register
在組合電路中使用 reg type,合成 → 線 (net)
在循序電路中使用 reg type,合成 → Flip-flop (register)
Inferred latch
在組合電路中,case、if…else…若沒有寫滿,合成後會產生latch
Notice
建議請勿在 C:\ 與 Desktop 建立專案
請勿命名中文資料夾或數字開頭資料夾
請確認 Device family 是否與 FPGA 晶片符合
Family: Cyclone / Device: EP1C6Q240C8
top module name & project name 需要一致
燒錄檔案至 FPGA 前,Double-check Pin Assignment
設定錯誤的 Pin,會導致 VeriInstrument 無法執行
連接 FPGA 板後,請先確認是否可以正常燒錄與動作
VeriLite USB Driver (For all students)
USB Blaster
如果出現無法辨識硬體裝置,請先將 JTAG 拔除後,先裝 VeriLite USB Driver 後,再裝上去 JTAG,讓電腦去辨
識 USB Blaster 裝置,接著去指定到 USB Blaster Driver目標資料夾 C:\altera\8.0\quartus\drivers\usb-blaster
Number Representation
May be represented using
Format
Binary, decimal, hexadecimal,
<size>’ <base_format> <number>
base_format:
b, d, h,
Example
4'b1111; 16'd255
23456 (32-bit decimal # by default); 'hc3 (32 bit)
12'b1111_0000_1010