Transcript Blueprint Reading for the Machine Trades, Sixth Edition Unit 4

Blueprint Reading for the
Machine Trades, Sixth Edition
Unit 4: Reading Multiview
Drawings
Russ Schultz and Larry Smith
PowerPoint presentation created by
LaVonne Vichlach
1
Reading the Drawings



Sufficient number of dimensions on a
print to enable you to produce the
drawing
Each dimension appears only once
Drafter may place dimension on
different view than expected
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
2
Reading the Drawings


Need to be proficient at reading
multiview drawings
May need to calculate dimensions not
provided from surrounding information
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
3
Spacer
Block
Calculate
A
.62
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
4
Spacer
Block
Calculate
B
.66
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
5
Spacer
Block
Calculate
C
.64
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
6
Spacer
Block
Calculate
D
1.94
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
7
Spacer
Block
Calculate
E
1.04
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
8
Spacer
Block
Calculate
F
1.28
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
9
Spacer
Block
Calculate
G
1.30
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
10
Spacer
Block
Calculate
H
1.92
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
11
Spacer
Block
Calculate
I
1.14
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
12
Spacer
Block
Calculate
J
.10
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
13
Spacer
Block
Calculate
K
1.94
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
14
Spacer
Block
Calculate
L
.82
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
15
Spacer
Block
Calculate
M
1.04
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
16
Basic
Dimension
Quiz
Which of the three
basic dimensions
are shown in the
front view-height,
width, or depth?
Height
Width
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
17
Basic
Dimension
Quiz
Which of the three
basic dimensions
are shown in the
top view-height,
width, or depth?
Width
Depth
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
18
Basic
Dimension
Quiz
Which of the three
basic dimensions
are shown in the
right-side viewheight, width, or
depth?
Height
Depth
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
19
Basic
Dimension
Quiz
Which of the three
basic dimensions
are shown in the
bottom viewheight, width, or
depth?
Width
Depth
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
20
Basic
Dimension
Quiz
Which of the three
basic dimensions
are shown in the
left-side viewheight, width, or
depth?
Height
Depth
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
21
Basic
Dimension
Quiz
Which of the three
basic dimensions
are shown in the
rear view-height,
width, or depth?
Height
Width
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
22
Dimension
Calculations 1
1. Height
dimension?
1.30
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
23
Dimension
Calculations 1
2. Width
dimension?
2.00
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
24
Dimension
Calculations 1
3. Depth
dimension?
1.10
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
25
Dimension
Calculations 1
Calculate
A
.50
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
26
Dimension
Calculations 1
Calculate
B
.80
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
27
Dimension
Calculations 1
Calculate
C
.70
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
28
Dimension
Calculations 1
Calculate
D
.50
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
29
Dimension
Calculations 1
Calculate
E
.60
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
30
Dimension
Calculations 1
Calculate
F
.20
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
31
Dimension
Calculations 1
Calculate
G
1.30
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
32
Dimension
Calculations 1
Calculate
H
2.00
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
33
Dimension
Calculations 1
Calculate
I
1.50
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
34
Dimension
Calculations 1
Calculate
J
.50
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
35
Dimension
Calculations 1
Calculate
K
.60
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
36
Dimension
Calculations 1
Calculate
L
1.10
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
37
Dimension
Calculations 1
Calculate
M
.60
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
38
Dimension
Calculations 1
Calculate
N
.50
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
39
Precedence of Lines
When visible lines, hidden lines, or
centerlines coincide in same view-a
preferred line is illustrated.
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
40
Precedence of Lines



Visible line over
hidden line
Visible line over
centerline
Hidden line over
centerline
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
41
Precedence of Lines
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
42
ADJ Holding
Block
1. What is the
name of the
object?
Adj Holding
Block
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
43
ADJ Holding
Block
2. Of what
material is the
object made?
(Do not
abbreviate.)
Hot-rolled
steel
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
44
ADJ Holding
Block
3. To what scale
(half, full,
double) is the
object drawn?
Full
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
45
ADJ Holding
Block
4. What system
of dimensioning
(fractional,
decimal, metric)
is used?
Metric
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
46
ADJ Holding
Block
5. What decimal
increments (inches,
centimeters,
millimeters) are
used?
Millimeter
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
47
ADJ Holding
Block
6. What angle of
projection (first,
second, third)
is used?
Third
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
48
ADJ Holding
Block
7. What tolerance
is assigned to
each
dimension?
0.5 MM
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
49
ADJ Holding
Block
8. What is the
height
dimension?
38 MM
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
50
ADJ Holding
Block
9. What is the
width
dimension?
68 MM
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
51
ADJ Holding
Block
10. What is the
depth dimension
at maximum
material
condition?
39.5
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
52
ADJ Holding
Block
Enter the
dimensions from
the drawing
11A011 for the
letter A.
39
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
53
ADJ Holding
Block
Enter the
dimensions from
the drawing
11A011 for the
letter B.
55.5
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
54
ADJ Holding
Block
Enter the
dimensions from
the drawing
11A011 for the
letter C.
22
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
55
ADJ Holding
Block
Enter the
dimensions from
the drawing
11A011 for the
letter D.
41
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
56
ADJ Holding
Block
Enter the
dimensions from
the drawing
11A011 for the
letter E.
24
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
57
ADJ Holding
Block
Enter the
dimensions from
the drawing
11A011 for the
letter F.
25.5
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
58
ADJ Holding
Block
Enter the
dimensions from
the drawing
11A011 for the
letter G.
24.5
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
59
ADJ Holding
Block
Enter the
dimensions from
the drawing
11A011 for the
letter H.
14.5
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
60
ADJ Holding
Block
Enter the
dimensions from
the drawing
11A011 for the
letter I.
6.5
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
61
ADJ Holding
Block
Enter the
dimensions from
the drawing
11A011 for the
letter J.
12
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
62
ADJ Holding
Block
Enter the
dimensions from
the drawing
11A011 for the
letter K.
10
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
63
ADJ Holding
Block
Enter the
dimensions from
the drawing
11A011 for the
letter L.
7.5
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
64
ADJ Holding
Block
Enter the
dimensions from
the drawing
11A011 for the
letter M.
18.5
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
65
ADJ Holding
Block
Enter the
dimensions from
the drawing
11A011 for the
letter N.
4.5
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
66
ADJ Holding
Block
Enter the
dimensions from
the drawing
11A011 for the
letter O.
14.5
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
67
Dimension
Calculations 2
1. Height
dimension?
1.32
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
68
Dimension
Calculations 2
2. Depth
dimension?
1.58
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
69
Dimension
Calculations 2
Calculate
A
.48
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
70
Dimension
Calculations 2
Calculate
B
1.38
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
71
Dimension
Calculations 2
Calculate
C
.32
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
72
Dimension
Calculations 2
Calculate
D
.34
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
73
Dimension
Calculations 2
Calculate
E
.66
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
74
Dimension
Calculations 2
Calculate
F
.30
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
75
Dimension
Calculations 2
Calculate
G
.58
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
76
Dimension
Calculations 2
Calculate
H
1.86
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
77
Dimension
Calculations 2
Calculate
I
.32
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
78
Dimension
Calculations 2
Calculate
J
.36
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
79
Dimension
Calculations 2
Calculate
K
.04
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
80
Dimension
Calculations 2
Calculate
L
.66
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
81
Dimension
Calculations 2
Calculate
M
.32
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
82
Dimension
Calculations 2
Calculate
N
.96
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
83
Accumulated Tolerances




Drawings are dimensioned to control
tolerance of important features
Double dimensioning is avoided
Machinist needs to calculate dimensions
Calculated dimension will accumulate
tolerance of every dimension used---true of
addition and subtraction
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
84
Dimensioning Methods


Three different methods of dimensioning
same shaft
Tolerances on step may vary depending
on dimensioning method
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
85
Chain Dimensioning





Includes length of each step
Individual tolerance for each step is
controlled
Does not include overall length
Each step has a tolerance
Overall length accumulates
tolerance of each step
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
86
Broken-Chain Dimensioning




Includes overall length and all but one
step length
Tolerance on overall length
All but least important step is controlled
Undimensioned length accumulates
tolerance of all dimensions used to
calculate it.
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
87
Datum Dimensioning


Each step length is measured from a
common surface or baseline
Accumulation is limited to not more than
two tolerances
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
88
5-Step
Shaft
D
A
C
B
Enter the
appropriate letters (A
thru D) into the
corresponding
numbered balloons
shown.
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
89
5-Step
Shaft
Enter the
appropriate letters
(A thru D) into the
corresponding
numbered balloons
shown.
A
C
E
D
B
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
90
5-Step
Shaft
What is the
tolerance on
the overall
length?
.01
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
91
5-Step
Shaft
What is the
tolerance on the
length of step B?
.05
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
92
6-Step
Shaft
1. Is (a) first-angle
or (b) third-angle
projection used?
(b) thirdangle
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
93
6-Step
Shaft
2. Is the circular
view (a) a top or
(b) a bottom
view?
(a) Top
view
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
94
6-Step
Shaft
3. Is the part (a)
concentric or (b)
eccentric?
(b)
concentric
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
95
6-Step
Shaft
4. Is the part
(a) symmetrical or
(b)
nonsymmetrical?
(a)
symmetrical
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
96
6-Step
Shaft
5. What is the print
tolerance for each
dimension
shown?
 .01
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
97
6-Step
Shaft
6. What is the
overall length of
the shaft?
3.60
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
98
6-Step
Shaft
7. What is the
MMC of
shoulder E OD?
1.51
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
99
6-Step
Shaft
8. What is the
MMC of the
bore ID?
1.49
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
10
0
6-Step
Shaft
9. What is the
tolerance on the
length of
shoulder A ?
 .02
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
10
1
6-Step
Shaft
10. What is the
tolerance on
the length of
shoulder D ?
 .01
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
10
2
6-Step
Shaft
11. Why are the
answers to
questions 9
and 10
different?
A requires two
dimensions to solve
–two tolerances
accumulate
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
10
3
6-Step
Shaft
12. Why is there no
hidden line
representing the 1.50
bore diameter in the
circular view?
Precedence of lines
rule-corresponds to
1.50  step
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
10
4
Enter the
appropriate letters
G, H, I J, L, and M
into corresponding
balloons.
K
I
J
G
M
H
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
10
5
Enter the
appropriate letters
N and L into
corresponding
balloons.
N
L
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
10
6
Surface
Identification
3
G B
C
H A
I
E
D
F
Enter the letters from the
front view into the
corresponding balloons
in the top view. Nearclosets to viewer’s eye.
Far-blocked from view by
near surfaces.
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
10
7
All tolerances are assigned a
tolerance of  .01. This example
is the broken-chain methodtolerances accumulate.
A and B
 .01
A and C
 .02
A and E
 .04
B and F
 .04
C and F
 .03
B and G
 .02
C and G
 .03
E and G
 .05
F and G
 .06
Surface
Identification
3
Maximum tolerance accumulation
=  .06
All tolerances are assigned a
tolerance of  .01. This example
is the datum method controls
tolerance accumulation.
A and B
 .01
A and C
 .01
A and E
 .01
B and F
 .02
C and F
 .02
B and G
 .02
C and G
 .02
E and G
 .02
F and G
 .02
Tolerance
Calculations
Maximum tolerance accumulation
=  .02
Tolerance
Calculations 2
Calculate reference
dimensions and their
accumulated
tolerances. Tolerances
always add. Phantom
lines represent the
limits.)
40  2
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
11
0
Tolerance
Calculations 2
Calculate reference
dimensions and their
accumulated
tolerances. Tolerances
always add. Phantom
lines represent the
limits.)
40  2
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
11
1
Tolerance
Calculations 2
Calculate reference
dimensions and their
accumulated
tolerances. Tolerances
always add. Phantom
lines represent the
limits.)
40 +4/-0
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
11
2
Tolerance
Calculations 2
Calculate reference
dimensions and their
accumulated
tolerances. Tolerances
always add. Phantom
lines represent the
limits.)
20  2
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
11
3
Tolerance
Calculations 2
Calculate reference
dimensions and their
accumulated
tolerances. Tolerances
always add. Phantom
lines represent the
limits.)
20 + 4/-0
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
11
4
Tolerance
Calculations 2
Calculate reference
dimensions and their
accumulated
tolerances. Tolerances
always add.
(Phantom lines
represent the limits.)
20  2
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
11
5
Hole
Identification 1
Determine the hole
diameter that
corresponds with
each encircled
letter shown on the
orthographic views.
A
.375
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
11
6
Hole
Identification 1
Determine the hole
diameter that
corresponds with
each encircled letter
shown on the
orthographic views.
B
.370
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
11
7
Hole
Identification 1
Determine the hole
diameter that
corresponds with
each encircled letter
shown on the
orthographic views.
C
.375
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
11
8
Hole
Identification 1
Determine the hole
diameter that
corresponds with
each encircled letter
shown on the
orthographic views.
D
.370
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
11
9
Hole
Identification 1
Determine the hole
diameter that
corresponds with
each encircled letter
shown on the
orthographic views.
E
.380
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
12
0
Hole
Identification 1
Determine the hole
diameter that
corresponds with
each encircled letter
shown on the
orthographic views.
F
.380
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
12
1
Hole
Identification 1
Determine the hole
diameter that
corresponds with
each encircled letter
shown on the
orthographic views.
G
.380
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
12
2
Hole
Identification 1
Determine the hole
diameter that
corresponds with
each encircled letter
shown on the
orthographic views.
H
.370
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
12
3
Hole
Identification 1
Determine the hole
diameter that
corresponds with
each encircled letter
shown on the
orthographic views.
I
.370
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
12
4
Hole
Identification 1
Determine the hole
diameter that
corresponds with
each encircled letter
shown on the
orthographic views.
J
.370
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
12
5
Hole
Identification 1
Determine the hole
diameter that
corresponds with
each encircled letter
shown on the
orthographic views.
K
.375
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
12
6
Hole
Identification 1
Determine the hole
diameter that
corresponds with
each encircled letter
shown on the
orthographic views.
L
.380
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
12
7
Dimension
Calculations 3
Determine the
dimensions that
correspond to
the encircled
letters shown to
the right.
A
.45
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
12
8
Dimension
Calculations 3
Determine the
dimensions that
correspond to
the encircled
letters shown to
the right.
B
.55
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
12
9
Dimension
Calculations 3
Determine the
dimensions that
correspond to
the encircled
letters shown to
the right.
C
.55
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
13
0
Dimension
Calculations 3
Determine the
dimensions that
correspond to
the encircled
letters shown to
the right.
D
.60
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
13
1
Dimension
Calculations 3
Determine the
dimensions that
correspond to
the encircled
letters shown to
the right.
E
.50
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
13
2
Dimension
Calculations 3
Determine the
dimensions that
correspond to
the encircled
letters shown to
the right.
F
.45
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
13
3
Dimension
Calculations 3
Determine the
dimensions that
correspond to
the encircled
letters shown to
the right.
Height
1.05
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
13
4
Dimension
Calculations 3
Determine the
dimensions that
correspond to
the encircled
letters shown to
the right.
Width
1.00
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
13
5
Dimension
Calculations 4
Determine the
dimensions that
correspond to
the encircled
letters shown to
the right.
A
.60
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
13
6
Dimension
Calculations 4
Determine the
dimensions that
correspond to
the encircled
letters shown to
the right.
B
.55
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
13
7
Dimension
Calculations 4
Determine the
dimensions that
correspond to
the encircled
letters shown to
the right.
C
.55
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
13
8
Dimension
Calculations 4
Determine the
dimensions that
correspond to
the encircled
letters shown to
the right.
D
.45
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
13
9
Dimension
Calculations 4
Determine the
dimensions that
correspond to
the encircled
letters shown to
the right.
E
.60
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
14
0
Dimension
Calculations 4
Determine the
dimensions that
correspond to
the encircled
letters shown to
the right.
F
.50
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
14
1
Dimension
Calculations 4
Determine the
dimensions that
correspond to
the encircled
letters shown to
the right.
Width
1.00
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
14
2
Dimension
Calculations 4
Determine the
dimensions that
correspond to
the encircled
letters shown to
the right.
Depth
1.05
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
14
3
View Selection 3
K
Select correct orthographic
view to correspond with the
arrowhead for each pictorial
view.
View Selection 3
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
14
4
View Selection 3
M
Select correct orthographic
view to correspond with the
arrowhead for each pictorial
view.
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
14
5
N
View Selection 3
Select correct orthographic
view to correspond with the
arrowhead for each pictorial
view.
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
14
6
J
View Selection 3
Select correct orthographic
view to correspond with the
arrowhead for each pictorial
view.
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
14
7
View Selection 3
H
Select correct orthographic
view to correspond with the
arrowhead for each pictorial
view.
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
14
8
View Selection 3
F
Select correct orthographic
view to correspond with the
arrowhead for each pictorial
view.
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
14
9
View Selection 3
O
Select correct orthographic
view to correspond with the
arrowhead for each pictorial
view.
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
15
0
D
View Selection 3
Select correct orthographic
view to correspond with the
arrowhead for each pictorial
view.
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
15
1
View Selection 3
E
Select correct orthographic
view to correspond with the
arrowhead for each pictorial
view.
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
15
2
View Selection 3
B
Select correct orthographic
view to correspond with the
arrowhead for each pictorial
view.
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
15
3
Dimension
Calculations
5
Determine the
corresponding
dimensions for
the following.
Height dimension
1.90
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
15
4
Dimension
Calculations
5
Determine the
corresponding
dimensions for
the following.
Width dimension
2.00
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
15
5
Dimension
Calculations
5
Determine the
corresponding
dimensions for
the following.
A
1.45
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
15
6
Dimension
Calculations
5
Determine the
corresponding
dimensions for
the following.
B
.52
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
15
7
Dimension
Calculations
5
Determine the
corresponding
dimensions for
the following.
C
2.10
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
15
8
Dimension
Calculations
5
Determine the
corresponding
dimensions for
the following.
D
.505
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
15
9
Dimension
Calculations
5
Determine the
corresponding
dimensions for
the following.
E
.42
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
16
0
Dimension
Calculations
5
Determine the
corresponding
dimensions for
the following.
F
1.00
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
16
1
Dimension
Calculations
5
Determine the
corresponding
dimensions for
the following.
G
.45
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
16
2
Dimension
Calculations
5
Determine the
corresponding
dimensions for
the following.
H
.495
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
16
3
Dimension
Calculations
5
Determine the
corresponding
dimensions for
the following.
I
1.13
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
16
4
Dimension
Calculations
5
Determine the
corresponding
dimensions for
the following.
J
.27
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
16
5
Corner
BRKT
1. What does
BRKT in the
title block
abbreviate?
Bracket
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
16
6
Corner
BRKT
2. What does
HRS in the
material
block
abbreviate?
Hotrolled
steel
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
16
7
Corner
BRKT
3. What does
NTS in the
scale block
abbreviate?
Not to
scale
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
16
8
Corner
BRKT
4. What is the
overall
depth
dimension?
2.22
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
16
9
Corner
BRKT
5. What is the
MMC of the
overall
height?
2.19
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
17
0
Corner
BRKT
6. What is the
MMC of the
.360 hole?
.355
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
17
1
Corner
BRKT
7. How much
tolerance can
accumulate
between the
.380 hole
centers?
 .01
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
17
2
Corner
BRKT
8. What is the
overall size of
the CORNER
BRACKET?
2.22 x 2.24 x 2.18
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
17
3
Corner
BRKT
Calculate the
value for A:
.18
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
17
4
Corner
BRKT
Calculate the
value for B:
.13
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
17
5
Corner
BRKT
Calculate the
value for C:
.37
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
17
6
Corner
BRKT
Calculate the
value for D:
.76
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
17
7
Corner
BRKT
Calculate the
value for E:
.17
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
17
8
Corner
BRKT
Calculate the
value for F:
.31
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
17
9
Corner
BRKT
Calculate the
value for G:
.80
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
18
0
Corner
BRKT
Calculate the
value for H:
.46
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
18
1
Corner
BRKT
Calculate the
value for I:
.31
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
18
2
Corner
BRKT
Calculate the
value for J:
.81
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
18
3
Corner
BRKT
Calculate the
value for K:
.04
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
18
4
Corner
BRKT
Calculate the
value for L:
.49
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
18
5
Corner
BRKT
Calculate the
value for M:
.00
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
18
6
View Selection 4
Select the correct right side view.
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
18
7
View Selection 4
Select the correct right side view.
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
18
8
View Selection 4
Select the correct right side view.
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
18
9
View Selection 4
Select the correct right side view.
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
19
0
View Selection 4
Select the correct right side view.
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
19
1
View Selection 4
Select the correct right side view.
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
19
2
View Selection 4
Select the correct right side view.
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
19
3
View Selection 4
Select the correct right side view.
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
19
4
View Selection 4
Select the correct right side view.
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
19
5
Missing Views 2
Complete
the view.
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
19
6
Missing Views 2
Complete
the view.
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
19
7
Missing Views 2
Complete
the view.
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
19
8
Missing Views 2
Complete
the view.
Schultz and Smith: Blueprint
Reading for the Machine
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
Trades, 6th edition
19
9