Transcript Analog – ISDN Converter

Analog – ISDN Converter
Connected to Avaya Integral Enterprise PBX
1
Analog – ISDN Converter
Connected to Avaya Integral Enterprise
1…4
ISDN trunk
1…8
Analog trunk/tie
Analog Network
Avaya Integral Enterprise
with ADM media module
1 2 3 4 5 6


Analog – ISDN Converter
One Analog – ISDN Converter is connected to ADM media module
with one STSM sub modules for 8 analog trunks.
For each additional converter, one STSM sub module is needed.
Analog – ISDN Converter
Key features
 Support of CLIP on analog line
 Up to 32 trunk lines, only one slot in IE module for ADM
board instead of 4 slots with ATx boards
 Converter is connected to Integral Enterprise via ADM Media
Module with STSM Submodule
 No Media Module for analog trunk (ATA,ATB,ATC) needed
Analog – ISDN Converter
Front view
Power LED
Analog – ISDN Converter
Rear view
USB connectors
Main switch
Fuse
IEC socket
Line connectors
Analog – ISDN Converter
Connection Options / rear








8 analog trunk lines
4 internal T0 port to connect to the BRA port of PBX
4 internal T0 port for synchronization with an ISDN exchange line in
hybrid mode
Line and PBX connections with terminal strips
4 USB ports for individual converter programming
IEC socket
Fuse 200mA
Power switch
Analog – ISDN Converter
Features








8 analog trunk line ports
4 internal T0 port for connection with BRA port of ISDN PBX
Caller ID (CLIP and CNIP) including date and time
Call forwarding (busy / no reply / unconditional)
Call brokerage (HOLD)
Conference calls (3PTY)
Automatic call back (CCBS)
Configuration software for Windows (2000/XP)
Analog – ISDN Converter
Trunk line features *











Tone (DTMF) and Pulse dialling
Recognition of dial and busy tone
Number and name presentation (CLIP/CNIP) with date and time
Remedial suppression of the own number (CLIR)
Recognition of charge pulses (12 kHz / 16 kHz)
Flash at trunk line, duration adjustable
Call forwarding on busy, if nobody answers the call, permanent
(CFB, CFNR, CFU)
Brokering (HOLD); flash time adjustable
Three-party conference call (3PTY)
Automatic callback to busy subscriber (CCBS)
Operating key sequences adjustable
* If supported and activated by network provider
Analog – ISDN Converter
ISDN features *








Point to Multipoint (PTMP) and Point to Point (PTP) connection
Number and name presentation (CLIP/CNIP) with date and time
Remedial suppression of the own number (CLIR)
Charge information during the call (AOCD)
Call forwarding on busy, if nobody answers the call, permanent
(CFB, CFNR, CFU)
Call Brokerage (HOLD)
Three-party conference call (3PTY)
Automatic callback to busy subscriber (CCBS)
* Depending on the functions which are available at the trunk line
Analog – ISDN Converter
Technical data

Operating voltage:



Power consumption
Exchange line connection:
Internal S0:

S0-synchronisation port:


PC/data connection:
Case:



Dimensions:
Weight:
Safety:
230V AC; +/-10 %; 50 Hz,
Internal power supply, fuse 200mA
12 W min., 24 W max.
8 analog ports, DTMF, CLIP/CNIP support
4 BRA, Point-to-Multipoint Connection
(PTMP), Euro ISDN (DSS-1)
Point-to-Multipoint (PTMP) or Point-toPoint (PTP) Connection
USB (V1.1, compatible to V2.0)
Metal, 1 HU, 19“ chassis
with Alloy front panel
(w x h x d) 483 mm x 44,4 mm x 300 mm
approx. 3,2 kg
CE
Analog – ISDN Converter
Supplier
Meiknologic GmbH
Hölderlinweg 19a
64285 Darmstadt
Germany
Phone: +49-6151-6698653
Fax: +49-6151-912223
E-Mail: [email protected]