Transcript Document 1145255

www.sineco.com
RS &RT series
“RS & RT” industrial circular connectors are a range of multiway connectors available in 8 shell
sizes and 8 insert arrangements all intermateable. “RS & RT” is equipped with identical shells from
military connectors complying to MIL-C-26482 spec.
Features and benefits
• Suitable for shielding applications
• Available in 8 shell sizes and 9 insert arrangements.
• Available in plug and receptacle versions for both male and female contacts.
• Different insert orientations possible.
• Plastic inserts with flammability rating: UL94-V0.
• 2 levels of water protection: Dynamic IP67 and IP68 both versions are IP69K
• 2 levels of salt spray: 48h and 96h
• Metal bayonet ring:
- Metal wave spring loaded
- Locks with audible positive “click”
- Assures 500 matings and unmatings
• Operating temp: -40°C to +105°C or +125°C
• Insulation resistance: 5000 MΩ min.
• Test potential: 2000 VAC (standard)
• RoHS compliant
Amphenol Sine Systems – NEW PRODUCTS 2009
Order guide 1__Plug & Receptacle
Part numbering Sequence(料号规则）
RT
0
RT
RS
6
16
19
P
shell size
0 – standard
0W –high density
N
(H or H6)
Type of contacts
Application
Insert arrangement
Insert Polarisation
Body variation
Notes :
Body variation : 0 : Wall mounting receptacle
6 : Cable plug
7 : Jam nut receptacle for rear panel
mounting
Shell size :
10, 12, 14, 16, 18, 20, 22, 24
Insert arrangement :
Type of contacts : P : Pin contacts
S : Socket contacts
Insert polarisation : N : Standard version
W, X, Y, Z : Different orientations
(consult factory)
(Design variation)
(Plating)
EC- end cap & standard seal for
wire 18~14 AWG
MM- end cap & reduced seal for
wire 24~20 AWG
……
Application : no letter: standard version (no o-ring)
H : Standard version, water protection IP 67 & IP 69K
H6 : Water protected IP 68 & IP 69K (only needed
for wall mounting & jam nut receptacles)
Design variation : No letter : Standard version
Others : Special versions
Plating :No letter : standard is nickel plating (48h
salt spray)
1: Black anodised, jam nut (96h salt spray)
2: Black anodised coupling ring (96h salt spray)
Amphenol Sine Systems – NEW PRODUCTS 2009
Order guide 2__contacts
1. Stamped & formed contact (连续模端子)
SS
20
M
(---)
1
F
Contact Type
Wire Awg size
contact size
Contact Packaging
Design Variation
Plating
SP=Male
14(crimp AWG
14)
M=size 16
Blank= 3,000 pc
reel
1=wire and
insulation crimp
for size 20-26
T=Tin
SS=Female
16(crimp AWG
18~16)
W=size 20
L=loose piece
1=Wire crimp for
size 14 & 16
F=Gold Flash
11=Wire and
insulation crimp
for size 16
G=Gold (plating thickness:
blank=10u"; if other
thickness, pls label the
thickness, for example:
30u", label "G30"
20(crimp AWG
22~20)
A=2.5mm
24(crimp AWG
26~24)
12(crimp
AWG14~12)
…..
Amphenol Sine Systems – NEW PRODUCTS 2009
Order guide 2__contacts
2. Machined contact (机加工端子)
MS
20
M
(---)
23
F
Contact Type
Wire Awg size
contact size
Contact
Packaging
Design Variation
Plating
MP=Male
14(crimp AWG
16~14)
Bulk pack
23=crimp barrel
T=Tin
MS=Female
16(crimp AWG
20~16)
W=size 20
12E0**= PCB tail, for RT00(
wall mouting receptacle); "**"
is outer length of PCB tail.
F=Gold Flash
A=2.5mm
12E7**= PCB tail, for RT07(
Jam nut mouting receptacle);
"**" is outer length of PCB
tail.
G=Gold (plating thickness:
blank=10u"; if other
thickness, pls label the
thickness, for example:
30u", label "G30"
RS8=Radsok
3.6mm,crimp barrel
S=plating silver(5um)
20(crimp AWG
22~20)
24(crimp AWG
26~24)
28(crimp AWG
30~28)
M=size 16
12(crimp AWG14~12)
6（Crimp 6~5AWG,
16mm2)
8（Crimp 8~7AWG,
10mm2)
…..
Amphenol Sine Systems – NEW PRODUCTS 2009
Order guide 2__contacts
3. Rocksolid contact
MS
20
M
(---)
23
F
Contact Type
Wire Awg size
contact size
Contact Packaging
Design Variation
Plating
RS=Female
14(crimp AWG
16~14)
Bulk pack
23=crimp barrel
F=Gold Flash
16(crimp AWG
20~16)
M=size 16
G=Gold (plating thickness:
blank=10u"; if other
thickness, pls label the
thickness, for example:
30u", label "G30"
W=size 20
20(crimp AWG
22~20)
24(crimp AWG
26~24)
…..
Amphenol Sine Systems – NEW PRODUCTS 2009
RS & RT series different point
RS SERIES
• RockSolid™ female contact
RT SERIES
•Stamped contact
•Formed contact
Amphenol Sine Systems – NEW PRODUCTS 2009
Connector types
1.
Wall mounting receptacle for Pin contacts RT00
针式接触件用法兰盘面板插座
Type 1: RT001619PN
No O-ring
Type 2: RT001619PNH
O-ring
Type 3: RT001619PNHEC
End-Cap
Waterproof:
IP67
Amphenol Sine Systems – NEW PRODUCTS 2009
Connector types
2. Wall mounting receptacle for socket contacts RT00
孔式接触件用法兰盘面板插座
Type 1: RT001619SN
No O-ring
Type 2: RT001619SNH
O-ring
Type 3: RT001619SNHEC
End-Cap
Waterpro
of: IP67
Amphenol Sine Systems – NEW PRODUCTS 2009
Connector types
3. Jam nut receptacle for Pin contacts RT07
针式接触件用螺帽夹紧插座
Type 1: RT071619PN
No O-ring
Type 2: RT071619PNH
O-ring
End-Cap
Waterproof:
Type 3: RT071619PNHEC
IP67
Amphenol Sine Systems – NEW PRODUCTS 2009
Connector types
4. Jam nut receptacle for socket contacts RT07
孔式接触件用螺帽夹紧插座
Type 1: RT071619SN
No O-ring
Type 2: RT071619SNH
O-ring
Type 3: RT071619SNHEC
End-Cap
Waterproof: IP67
Amphenol Sine Systems – NEW PRODUCTS 2009
Connector types
5. Cable plug for pin contacts RT06
针式接触件用线缆插头
Type 1: RT061619PN
No O-ring
Type 2: RT061619PNH
O-ring
Type 3: RT061619PNHEC
End-Cap
Waterproof:
IP67
Amphenol Sine Systems – NEW PRODUCTS 2009
Connector types
6. Cable plug for socket contacts RT06
孔式接触件用线缆插头
Type 1: RT061619SN
No O-ring
Type 2: RT061619SNH
O-ring
Type 3: RT061619SNHEC
End-Cap
Waterproof:
IP67
Amphenol Sine Systems – NEW PRODUCTS 2009
Backshell solution(尾部附件解决方案)__Cord grip
1. Shielded cable clamp with strain relief nut for waterprotected applications(IP68)
Length
EMI shielding ring
(Beryllium copper)
Thread A
Picture
Sine P/N
Shell
Size
RT0L-10CG-S1
RT0L-10CG-S2
9/16 – 24
UNEF
5/8.5
54
11/16 – 24
UNEF
8/12.5
54
13/16 – 20
UNEF
8/12.5
60
15/16 – 20
UNEF
60
1’’ 1/16 – 18
UNEF
9.5/14.5
16
RT0L-18CG-S1
RT0L-18CG-S2
50
6/10.5
14
RT0L-16CG-S1
RT0L-16CG-S2
Thread A
6/10.5
12
RT0L-14CG-S1
RT0L-14CG-S2
Total length
(mm)
3/6.5
10
RT0L-12CG-S1
RT0L-12CG-S2
Clamping range
(Φ mm min/Max)
13.5/18
9.5/14.5
18
13.5/18
Amphenol Sine Systems – NEW PRODUCTS 2009
Backshell solution(尾部附件解决方案)__Cord grip
2. Cable clamp with strain relief nut for waterprotected applications(IP68)
Length
No EMI shielding
ring
Thread A
Picture
Sine P/N
Shell
Size
RT0L-10CG-C1
RT0L-10CG-C2
9/16 – 24
UNEF
5/8.5
54
11/16 – 24
UNEF
8/12.5
54
13/16 – 20
UNEF
8/12.5
60
15/16 – 20
UNEF
60
1’’ 1/16 – 18
UNEF
9.5/14.5
16
RT0L-18CG-C1
RT0L-18CG-C2
50
6/10.5
14
RT0L-16CG-C1
RT0L-16CG-C2
Thread A
6/10.5
12
RT0L-14CG-C1
RT0L-14CG-C2
Total length
(mm)
3/6.5
10
RT0L-12CG-C1
RT0L-12CG-C2
Clamping range
(Φ mm min/Max)
13.5/18
9.5/14.5
18
13.5/18
Amphenol Sine Systems – NEW PRODUCTS 2009
CORD GRIP ASSEMBLY
Step 1 →
Step 2 →
Step 3 →
Step 4 →
Step 5 →
EMC Grounding Ring
Amphenol Sine Systems – M23 and M40 Connectors . Confidential Information . For Internal Use Only
Backshell solution(尾部附件解决方案)__Flexgrip
Amphenol Sine Systems – NEW PRODUCTS 2009
FLEX GRIP ASSEMBLY
Step 1 →
Step 2 →
Step 3 →
Step 4 →
Step 5 →
Step 6 →
Amphenol Sine Systems – M23 and M40 Connectors . Confidential Information . For Internal Use Only
Sealing for wall mounting receptacle
（安装在法兰盘插座后面，防水用）
Part number
RTFD12B
RTFD13B
RTFD14B
RTFD15B
RTFD16B
Amphenol Sine Systems – NEW PRODUCTS 2009
Metal environmental dustcap receptacles
For dustcap without chain
skip “G” e.g. RT010DC
Part number
RT010DCG
RT012DCG
RT014DCG
RT016DCG
RT018DCG
Amphenol Sine Systems – NEW PRODUCTS 2009
Application(应用)
•
•
•
•
•
•
•
此产品系列能够广泛代替MIL-C-26482系列圆形连接器，具有以下特点：
卡口式快速连接
优良的抗振动及冲击特性
能有效解决屏蔽问题
屏蔽及夹线防水方案
优良的耐环境性能
能有效解决高压及大电流问题
产品装配使用方便快捷
模块标准化设计，批量模具生产，性价比高
散线防水方案
Amphenol Sine Systems – NEW PRODUCTS 2009
Amphenol Sine Systems – NEW PRODUCTS 2009
Thank You
for your
Time
www.sineco.com
Amphenol Sine Systems – NEW PRODUCTS 2009