Safe’T’Suction

-Patented Australian Design -Safe, Dedicated Cleaner Connection for Swimming Pools, Water Features And Ponds.

What is the Davbroz Safe’T’Suction

? Safe’T’Suction provides a safe, dedicated vacuum connection point for manual and automatic pool cleaners.

Davbroz Safe’T’Suction

? It is ideal for Wet Deck/Edge pools where a skimmer box can’t be fitted. Why would you need a skimmer box at all?

Safe’T’Suction has a patented “Flow selection device” that ensures safe and reliable cleaner operation.

How Does it Work?

Problem:

Wet Edge Catch Tank Pool Pump

Solution:

External VacuumingPoint Wet Edge Catch Tank Pool Check Valve 3-Way Valve Pump Vacuuming Point Filter Filter To Pool To Pool Problem: On standard wet-edge pools, there is no skimmer box installed. Therefore there is no easy or safe way to install a suction pool cleaner or to manually vacuum the pool or catch tank from the pool.

Solution: Install the Davbroz Safe-T-Suction. This will provide for safe vacuum connection points for manual or automatic pool cleaning. A three-way valve and check valve needs to be installed.

Safety

• UL testing laboratory in California definition of Safe’T’Suction. “ANSI/ASME A112.19.8 is intended for suction fittings, covers, grates and similar entrapment prevention devices. Your product is none of these. It is simply a component of the entire plumbing system, but not the actual suction fitting that is relied upon to prevent hair, body, finger and limb entrapment.” • Safe’T’Suction meets US Standard NSF/ANSI 50 for Water Circulation system components and Related materials for Swimming Pools, Spas and Hot tubs.

• Swimmers are never in danger of increased suction at underwater outlets as the reverse occurs when the Safe’T’Suction cleaner attachment port is in use

.

Connection with Skimmer Box

• • • Where a Skimmer is to be installed and is placed in the correct location to surface skim, the Safe’T’Suction can be installed between the skimmer and the pump on the common flow line. This provides a safe cleaner port and a shorter hose to clean the bottom and sides while the skimmer continues to draw in surface debris as it was designed to do.

Resulting in a cleaner pool.

SAFE’T’SUCTION LOCATION

• In the pool shell in or out of the water.

• Safe’T’Suction can be conveniently located close to the Spa, catch tank, water feature or pond for manual vacuuming.

• Remember that Safe’T’Suction can be installed safely anywhere along the main suction line and still operate from one pump.

Added advantages

• POWER SAVING: Safe’T’Suction operates from the common flow line and therefore uses the same pump as the pool filtration system.

• QUICK CLEAN: When a neglected pool needs to be cleaned quickly, a hand held vacuum cleaner attached to the Safe’T’Suction will clean the pool much faster than a robotic or an automatic suction cleaner. Even a pool with an infloor system will benefit for only a small cost.

• SAND: Beachside areas that are sometimes covered in sand when a strong onshore wind is blowing, have problems with infloor systems and robotic cleaners. These pools are ideally suited to a Safe’T’Suction.

• PONDS: So many ponds are unfiltered and require regular algae cleanups.

Safe’T’Suction is easily installed and the connection port can be located in the garden for hand vacuuming when needed.