Transcript A. Foeth bv - Gebruikte machines en procesapparatuur

Harselaarseweg 23
3771 MA BARNEVELD
The Netherlands
Tel.:
0031-342415551
Fax:
0031-342417845
E-mail:
[email protected]
Website: www.foeth.nl
A. FOETH BV
USED MACHINERY
NR. 146 / JANUARI 2017
GEBRUIKTE MACHINES – GEBRAUCHTE MASCHINEN – MACHINES D’OCCASIONS
A. Foeth BV is one of Europe’s largest dealers of used process equipment with over 100 years of experience.
The equipment mentioned in this paper is just a selection of all the machinery available.
If you cannot find the particular machine you are looking for, please fax or mail us your requirements.
Premises in Barneveld – the Netherlands
with a total area of 32,000 sq.m.
1. Various.
2. Z-blade mixers, change pan mixers,
masticators, conches.
3. Conical, tumbler, plough share mixers,
foam mixers.
4. Ribbon blenders, mixer-granulators.
5. Vacuum processing vessels, screw
conveyors, heat exchangers.
6. Reactors, stirring vessels.
7. Reactors, stirring vessels.
8. Size reduction
9. Sieves, colloid mills.
058H376, 1 CONICAL DRYER, HOSOKAWA MICRON,
type 40-VDC-26, stainless steel, 4000 ltr., Jckt.
268K277, 1 REACTOR, HANAG, stainless steel, 8540 ltr.,
vac./6 bar, Jckt. (13 bar), 15 kW.
257K224, 1 LOEDIGE MIXER, type FKM-3000, stainless
steel, 3000 ltr., 90 kW, 3 choppers.
263K272, 1 VIBRO SIEVE, ALLGAIER, type VTS-600/2,
stainless steel, 2 Decks, Dia. 600 mm.
10. Sand mills, dissolvers, butterfly mixers,
three-roll mills.
11. Screw presses, roll-compactors,
scraped surface heat exchangers,
spheronizers.
12. Pressure filters, nutsche filters, filter
presses, belt filters.
13. Centrifuges, rotating vacuum drumfilters, colloid mills.
14. Film evaporators, fluid bed dryers.
15. Tumbler dryers, ovens, tray dryers.
16. Paddle dryers.
17. Coating pans, drum coaters, in-line
reactors.
18. Conical and tumbler dryers, roll dryers.
19. Extruders, hot- and cold mixers, container mixers.
20. New conical mixers.
You can find us from the A30 exit
Harselaar. Follow direction Harselaar.
250K260, 1 PISTON HOMOGENIZER,
ALFA LAVAL, type SHL-05, 200 bar,
400 ltr./Hr.
237K245, 1 NUTSCHE FILTER
DRYER, OLSA, stainless steel, 0,07 m2
vac./4,5 bar, Jckt. (4,5 bar).
237K244, 1 NUTSCHE FILTER/
DRYER, EFCI, hastelloy, 0,22 m2,
vac./3,9 bar, Jckt. (vac./6 bar), 4 kW.
263K280, 1 FLUIDBED DRYER/
GRANULATOR, GLATT, type GPCG3, 3-5 kg, + sprayer.
266K279, 1 VIBRO SIEVE,
ALLGAIER, type VTS-1200/3, stainless steel, 3 Decks, Dia. 1200 mm.
250K266, 1 GRANULATING SIEVE,
FREWITT, type MGI-628, stainless
steel, Dia. 122x440 mm, 1,1 kW.
WE ARE IN THE MIDDLE OF THE
NETHERLANDS; 45 MIN. (BY CAR)
FROM SCHIPHOL AIRPORT.
A TRAIN LEAVES EVERY 30 MIN.
DIRECTLY FROM THE AIRPORT TO
AMERSFOORT.
Please note
In stock
All listed machinery is in stock and
directly available.
Export
Approx. 75% of our machinery is being
exported worldwide.
Visit
You’re welcome to visit our premises –
opening hours are 8.30-16.30 on the
regular working days.
Workshop
We have our own workshop for machinery to be checked or overhauled.
A. Foeth b.v.
270K282, 1 COATING PAN, BRUCKS,
type modell X, stainless steel, Dia.
1600 mm, 2,2 kW.
-
Barneveld
The Netherlands
-
Tel. 0031 (0)342415551
Fax 0031 (0)342417845
E-mail:
[email protected]
Website: www.foeth.nl
JANUARI 2017
2
Z-BLADE MIXERS – KNEADERS
Z-BLADE MIXERS
Partnr.
067G291
056H237
045F188
086F472
041H141
058G263
074F363
038H122
041H140
079Z305
035H099
079F435
101A516
030U170
015F353
115T714
105A476
002B004
038P171
062C287
054F306
012Y114
062R250
066X406
262K268
124M557
212K061
015X120
054Z209
088X452
104K359
012Y112
012Y115
012Y113
012Y111
012Y116
001B017
118S459
206K013
255K250
072H310
033B200
067Y400
Make
AMK AACHEN
MEILI
WINKWORTH LTD
LINDEN
Partnr.
090A440
033E083
101R435
038H120
027U165
024H055
002E002
183A603
186K643
164H746
082Z322
090U632
090U631
043X307
017M048
276D1160
033B201
Make
MICKLE LABORATO
WERNER&PFLEIDERER
BRABENDER
IKA JANKE & KUN
WERNER&PFLEIDERER
HERMANN LINDEN
WERNER&PFLEIDERER
LAIM
WERNER&PFLEIDERER
J. BORGONIEN
WERNER&PFLEIDERER
HERMANN LINDEN
HERMANN LINDEN
WERNER&PFLEIDERER
WERNER&PFLEIDERER
BAKER AND PERKINS
Partnr.
070K204
005S020
017H052
083B501
069C433
243D976
208H932
162D588
002H002
072Y444
045Y257
045Y258
064W275
045Y256
061H254
044H144
078H352
101S392
240K231
019G056
052Y337
067E417
137H649
064W269
156M594
032H073
240K230
065A300
017Z060
050Z196
050Z194
084Z416
084Z415
015C031
265K274
072G336
010I041
040T246
083B500
002H001
083B499
020C055
083B498
050Z188
050C290
118X753
Make
Type
Capacity (Ltr.)
BONNET
VOEGELE
PD 150
HERMANN LINDEN
LPMD-2
2,0
IKA MASCHINENBAU
HKV5-VHVX-VE
2,5
DALTON CORP. JAPAN 5-DMV
3,0
MOLTENI
1.5
5,0
SEGER+CREMER
5,0
MOLTENI
1.5
5,0
MOLTENI MILANO
I-5 S.V.
7,0
GUSTAV SPANGENBERG VM-8
8,0
DIETER WERNER
VM-8
8,0
DIETER WERNER
VM-8
8,0
GRIESER & FAULHABER VPL-8
8,0
GUSTAV SPANGENBERG VM-8
8,0
HERBST GMBH
HR 15-7
2000
HERBST & CO.
Rapid HR-V 15
15,0
COLLETTE
MP-20
SUTER
PRH-25
25,0
BEAR WODSCHOW
Varimixer AR-30
30,0
BEAR WODSCHOW
Varimixer RN-30
30,0
DRAIS
FH-30
30,0
SPANGENBERG
SNM 50
50,0
60,0
GRIESER & FAULHABER VPL-60
60,0
E.KOLB.LOHER
80,0
DRAISWERKE
FH-80 EST
80,0
BEAR WODSCHOW
Varimixer R-100
100,0
ARTOFEX AARAU
RG-102
100,0
MOLTENI MILANO
I-150 SV
150,0
COLLETTE
MPH-150
150,0
COLLETTE
MPH-150
150,0
DRAIS
FH-3
165,0
DRAIS
FH-3
165,0
COLLETTE
MPH-300
300,0
DRAISWERKE
FH-300 S Torrma
300,0
LOEDIGE GMBH
FH-300 S
300,0
SPANGENBERG
VM320
320,0
TOPOS
350,0
MOLTENI ITALY
PH-500 S.V
500,0
MOLTENI MILANO
I-500
500,0
MOLTENI MILANO
PH-500 S.V
500,0
MOLTENI MILANO
PH-900 SV
750,0
DRAIS
FH-800 S
COLLETTE
MPH-900
900,0
MIRALLES S.A.
MPHDH-1000
1000,0
COLLETTE
MPH-1500
1500,0
WINKWORTH
ERWEKA
WERNER&PFLEIDERER
HERMANN LINDEN
WERNER&PFLEIDERER
BATTAGGION
AMK AACHEN
WERNER&PFLEIDERER
AMK AACHEN
LINDEN
WINKWORTH
AMK AACHEN
LINDEN
LINDEN
WERNER&PFLEIDERER
GUITTARD/RPA
MEILI
AMK
TONNAER B.V.
BAKER PERKINS
BACHILLER S.A.
WERNER&PFLEIDERER
WERNER&PFLEIDERER
WINKWORTH
UTV CHEMIE
APV CHIMIE
APV CHIMIE
F. AOUSTIN & CIE
APV CHIMIE
HERMANN LINDEN
WERNER&PFLEIDER
HERMANN LINDEN
GUITTARD
GUITTARD
GUITTARD
BUSS
Type
Capacity (Ltr.)
BAUART III U
1,0
Laborkneter
1,0
2-Z
1,2
LK II 2
2,0
3,0
8Z
4,5
AR-400/LK-5 W
5,0
UK-III Grösse 5
5,0
KIII-10A
10,0
LUK-6
10,0
IP 2C 10 AP/S
12,5
VI U-20
20,0
20,0
UK-20-K-5
20,0
VIU-20/IV
20,0
K II N 35
35,0
16 Z SS
36,0
II U-40
40,0
K II 35
50,0
K III 60 I
60,0
UK-80 K4UH
80,0
M-54
100,0
100,0
II U-110
110,0
TZU-125
125,0
140,0
AMB-150 Atex
150,0
175,0
200,0
UK-14-X
200,0
29Z SS JKT
235,0
M-40 SL
250,0
M-40 SL
250,0
M-40 SL
250,0
M-40 SL
250,0
M-40 SL
250,0
K-IV 300 SP
300,0
UK 14-VI H
300,0
K-II N-450
450,0
M<-57
500,0
M-57L
500,0
Polymix M-200
1500,0
SR-3000
3000,0
Material
1.4571
SS
SS
SS
316
SS
SS
SS
321/316
SS
304
SS
MS
MS
1.4571
MS
SS
SS
Brass
MS
1.4571
MS
MS
SS
SS
MS
SS
MS
SS
SS
SS
MS
MS
MS
MS
MS
1.4571
SS
1.4571
SS
SS
MS
SS
Motor (kW)
1,1
0,75
0,37
0,55
0,75
1,1
0,8
3,0+2,8
3,0+2,2
2,0
10/15
5,5+3,0
3,0
No motor
4,0
No motor
5,5
No motor
15,0
No motor
7,5
11,0
7,5
2x 2,2
7,4/10,0
7,5
5,5
7,5
45,0
45,0
45,0
45,0
45,0
16/24
75,0
22,0
8,8
30,0
75,0
110,0
056H237, 1 Z-BLADE MIXER,
MEILI, stainless steel, 1 ltr., Jckt.,
0,75 kW.
058G263, 1 VACUUM Z-BLADE
MIXER, WINKWORTH, type 8Z,
stainless steel, 3,0-4,5 ltr., Jckt.,
1,1 kW.
038H122, 1 Z-BLADE MIXER,
WERNER AND PFLEIDERER,
type UK-III, stainless steel, 5 ltr.,
Jckt., 0,8 kW.
002E002, 1 DOUBLE SHAFT
KNEADER, WERNER AND
PFLEIDERER, type LUK 8,0 K3,
stainless steel, 8 ltr., vacuum,
Jckt., 4,8/6,0 kW.
079Z305, 1 MIXTRUDER,
WERNER+PFLEIDERER, type
LUK-6X/AS 2, stainless steel,
10 ltr., Jckt., screw discharge.
041H140, 1 MIXTRUDER, LINDEN, type K-III 10A, stainless
steel, 10 ltr., vacuum, Jckt., 3 kW,
+ screw discharge.
035H099, 1 BATTAGGION, type
IP2C 10 AP/S, stainless steel,
12,5 ltr., vacuum, Jckt., 3 kW,
+ screw discharge.
079F435, 1 MIXTRUDER, AMK,
type VI U-20, stainless steel,
20 ltr., vacuum, Jckt., electric
heating.
015F353, 1 MIXTRUDER, AMK,
type VIU-20/IV, stainless steel,
32 ltr., Jckt., 5,5 kW., screw discharge.
002B004, 1 Z-BLADE MIXER,
AMK, type II U-40, stainless
steel, 40 ltr., Jckt., 4 kW.
262K268, 1 MIXTRUDER,
TONNAER, type TZU-125, stainless steel, 125 ltr., Jckt., screw
discharge.
255K250, 1 Z-BLADE MIXER,
GUITTARD, type M57S, stainless
steel, 500 ltr., 8,8 kW.
212K061, 1 Z-BLADE MIXER,
BACHILLER, type AMB-150
Atex, stainless steel, 150 ltr.,
2x2,2 kW.
206K013, 1 Z-BLADE MIXER,
LINDEN, TYPE KII N-450, stainless steel, 450 ltr., 22 kW.
072H310, 1 Z-BLADE MIXER,
GUITTARD, type M57L, stainless
steel, 500 ltr., Jckt., 30 kW.
067Y400, 1 Z-BLADE MIXER,
BUSS, type SR-3000, stainless
steel, 3090 ltr., Jckt., 110 kW.
MISCELLENEOUS KNEADERS
Type
Capacity (Ltr.)
813301
HKD-T 0.6
LKS-1
LUK 8.0 K3
R6
LDUK 6-IINS
UK-14 X/AU
K-IV-S 2000 SP
K-IV-S 2000 SP
UK-19 VI H SU
UK-19 VIH SUI
0,5
0,5
0,6
1,0
1,0
8,0
12,0
18,0
30,0
200,0
2000,0
2000,0
2250,0
2250,0
2500,0
3000,0
Material
SS
SS
SS
MS
SS
SS
SS
MS
SS
MS
SS
SS
1.4571
MS
MS
MS
Motor (kW)
1,6/2,2
0,18
2,3/3,7
1,1
4,8/6,0
1,5
7,5
0,55
30,0+17,5
200,0
200,0
110,0
75,0
75,0
132,0
PLANETARY CHANGE PAN MIXERS
Material
MS
316
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
150
SS
20,0
SS
SS
SS
SS
SS
SS/ALUM
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
304
SS
1.4571
MS
SS
SS
MS
SS
SS
SS
SS
SS
SS
Motor (kW)
0,37 KW
7,5/9,0
1,1+0,55
0,6
0,37/0,22
0,55
1,1
0,30/0,37
0,55
0,55
0,75
0,55
SS
SS
1,8
1,0
1,0
2,2
3,6
1,5
4,0
Motor
13,5
3,0
5,5
4,0
4,0
5,5
9,2
11,0
11,0
9/11,0
22,0
22,0
22,0
30,0
18,5
2x 37,0
15,0
PLANETARY MIXERS
017H052, 1 PLANETARY
MIXER/DISSOLVER, LINDEN, type LPMD-2, stainless
steel, 2 ltr., vacuum, Jckt.
002H002, 1 PLANETARY
MIXER, MOLTENI, type I5S,
stainless steel, 5 ltr., Jckt.
064W269, 1 PLANETARY
CHANGE PAN MIXER, GRIESER UND FAULHABER, type
VPL-60, stainless steel, 60 ltr.,
Jckt.
072G336, 1 PLANETARY
MIXER, LOEDIGE, type
FH-300 S, stainless steel,
300 ltr., 11 kW.
032H073, 1 VACUUM PLANETARY CHANGE PAN MIXER,
DRAIS, type FH-80 EST, stainless steel, 80 ltr., Jckt.
002H001, 1 PLANETARY
MIXER, MOLTENI, type
I 500, mild steel, 500 ltr.,
22 kW.
A. Foeth b.v.
-
078H352, 1 PLANETARY
CHANGE PAN MIXER,
COLLETTE, type MP-20,
stainless steel, 20 ltr., Jckt.,
0,75 kW.
061H254, 1 PLANETARY
CHANGE PAN MIXER,
HERBST, type HR 15-7,
stainless steel, 15 ltr.
050Z194, 1 PLANETARY
CHANGE PAN MIXER, COLLETTE, type MPH-150, stainless
steel, 150 ltr., 4 kW.
083B499, 1 VACUUM
PLANETARY MIXER,
MOLTENI, type PH-500
SV, stainless steel, 500 ltr.,
Jckt., 22 kW.
Barneveld
The Netherlands
017Z060, 1 VACUUM
PLANETARY MIXER MOLTENI,
type I-150SV, stainless steel,
150 ltr., 5,5 kW.
020C055, 1 VACUUM
PLANETARY MIXER,
MOLTENI, type PH-900 SV,
stainless steel, 750 ltr., Jckt.
-
044H144, 1 VACUUM
PLANETARY CHANGE
PAN MIXER, HERBST, type
Rapid HR-V, stainless steel,
electric heated.
040T246, 6 PLANETARY
CHANGE PAN MIXERS,
TOPOS, stainless steel, 300 ltr.,
9,0/11,0 kW.
050Z188, 1 PLANETARY
MIXER, COLLETTE, type
MPH-900, stainless steel,
900 ltr., 18,5 kW.
Tel. 0031 (0)342415551
Fax 0031 (0)342417845
240K231, 1 PLANETARY
CHANGE PAN MIXER,
WODSCHOW, type AR-30,
stainless steel, 30 ltr., 1 kW.
052Y337, 1 VACUUM
PLANETARY MIXER
DRAIS, type FH-30, stainless steel, 30 ltr., Jckt.
265K274, 1 VACUUM PLANETARY CHANGE PAN MIXER,
DRAIS, type FH-300S Tormat,
stainless steel, 300 ltr., 9,2 kW.
067C290, 1 PLANETARY
CHANGE PAN MIXER,
TALLERES MIRALLES,
type MPHDH-1000, stainless steel, 1000 ltr., + dissolver stirrer.
118X753, 1 PLANETARY
MIXER, COLLETTE, type
MPH-1500, stainless steel,
1500 ltr., 18,5 kW.
E-mail:
[email protected]
Website: www.foeth.nl
JANUARI 2017
3
CONICAL MIXERS
Partnr.
031A157
071G334
000R122
117I362
000K379
000K289
245K203
062I196
000K184
275K289
000K394
069B391
000N555
066H281
085G413
000K314
073B405
065C358
016F158
030S190
Make
NAUTAMIX HAARLEM
CONICAL MIXER
VRIECO
CONICAL MIXER
CONICAL MIXER
HOSOKAWA NAUTA
CONICAL MIXER
NAUTAMIX
CONICAL MIXER
NAUTAMIX HAARLEM
CONICAL MIXER
CONICAL MIXER
HOOSOKAWA MICRON
CONICAL MIXER
HOSOKAWA MICRON
NAUTAMIX HAARLEM
HOSOKAWA MICRON
KRAUSS MAFFEI
CONICAL MIXERS
Type
Capacity (Ltr.)
20,0
HV-50
50,0
HV-50
50,0
0,6 VB-1
60,0
HV-300
300,0
HV-600
600,0
HV-600
600,0
600,0
HV-1000
1000,0
MBX-10
1000,0
HV-1500
1500,0
MBXU-15 RW
1500,0
HV-2000
2000,0
HV-2000
2000,0
25-LFR-43
4000,0
HV-3000
3000,0
80 RB-4
8000,0
MBX-100 S
10.000,0
100 RV-4
10.000,0
Titus mixer
37.500,0
Material
316
SS/Teflon
SS
MS
SS
SS
304
SS 316
SS
SS
SS
1.4301
SS
SS
316
SS
304
MS
304
SS
Motor (kW)
0,55
0,75
0,75
1,5/0,55
3,0
3,0
3,0
4,0/0,37
2,2+0,15
4,0
11,0+0,55
4,0
4,0
5,5+0,55
5,5
1,3+14,5
15,0+1,5
11,0+1,1
22,0
TUMBLER MIXERS
Partnr.
041F172
144P678
063F288
021F066
021F065
121M545
038R378
040F268
041B216
095T577
025Y184
088B537
036S123
001W017
029F132
063E235
047B233
024B115
163N782
048A252
045H154
004Y028
Make
Type
NIRO ATOMIZER
TELSCHIG GMBH
WAB BACHOFEN
WAB BACHOFEN
JONES
PATTERSON KELLE
ENGELSMANN AG
SEGLER GMBH BERGE
ZONDERVAN
ROBERT BOSCH
PAUL O. ABBÉ
GLADIATOR
20”CLS ZZ+LB+P
RSM6/60
Turbula T-10 B
Turbula T-10 B
DY 25
Partnr.
065E269
254K249
041G194
065E270
028H066
069C298
063G294
063C289
063C288
001A027
061G279
030H077
260K261
156I485
001A025
267K275
263K269
060P266
020Y106
098W483
117Z457
061H329
041B215
063S240
058B358
238K179
165M611
142S653
063A305
026T148
097X499
071Z339
086A461
026W131
030E106
020Y107
051A285
008U041
239K220
060R288
062B445
085C409
003C006
017X077
061G282
061G283
083K285
020Y108
072Y445
020Y109
087U562
104W505
084Y579
012S030
039G145
217K069
017C108
024W116
217K070
084A392
241K200
247K224
142P670
079W358
062X389
049G201
257K282
061H328
016A187
016A188
016A186
026Z150
016A185
Make
LÖDIGE
LÖDIGE
LÖDIGE
LÖDIGE
LÖDIGE
LÖDIGE PADERBORN
LOEDIGE
HOSOKAWA MICRON
HOSOKAWA MICRON
DRAIS MANNHEIM
HOSOKAWA MICRON
GUSTAV EIRICH
LÖDIGE
DRAIS
DRAIS MANNHEIM
LÖDIGE
LÖDIGE
SA-ET
DRAIS MANNHEIM
DRAIS
DRAIS
LOEDIGE
SEGLER GMBH BERGE
LÖDIGE
LÖDIGE PADERBORN
LÖDIGE GMBH
LÖDIGE
LÖDIGE
LÖDIGE
LÖDIGE
LÖDIGE
FAIRFIELD DALTON LTD
DRAIS MANNHEIM
DRAIS
KEK-GARDNER
DRAIS MANNHEIM
LÖDIGE
MINOX
LÖDIGE GMBH
MORTON
LÖDIGE PADERBORN
LOEDIGE
LÖDIGE
LÖDIGE
LOEDIGE
LÖDIGE
LOEDIGE
DRAIS MANNHEIM
DRAIS
DRAIS MANNHEIM
DRAIS
MORTON MACHINES
DRAIS MANNHEIM
SGM
LOEDIGE
LÖDIGE GMBH
ZYKLOS GMBH
DRAIS
LÖDIGE GMBH
DRAIS
MAP ITALY
LÖDIGE GMBH
LÖDIGE
MTI MISCHTECHNIK
MTI
LOEDIGE GMBH
LÖDIGE
LOEDIGE
LÖDIGE
LÖDIGE
LÖDIGE
LÖDIGE
LÖDIGE
ENGELSMANN
WAB BACHOFEN
SCHEPENS
SERVOLIFT/SCHOLL
SEEBECKWERFT
LINDOR
EBERHARD HOESCH
Capacity (Ltr.)
8,0
10,0
10,0
35,0
45,0
ELTE-650
50,0
Freifallmischer
100,0
100,0
250,0
RVB-10
275,0
MY 7/4743
300,0
300,0
CDM
350,0
Turbula T-500 C
500,0
500,0
Bicone-500 L
NG-1200
800,0
950,0
TM 10 S
1000,0
L-2000
2000,0
DKM-3150
14.000,0
Material
MS
SS
SS
SS
304
MS
SS
318
SS
304
316
SS
1.4541
316
304
1.4301
304
1.4541
SS
1.4571
Motor (kW)
0,37
7,5/8,6
0,25
0,37
0,37
Motor
0,75+3,6
0,37
4,0
1,5
3,0
7,5
1,5
2,2
7,5
15,0+22,0
Hydr.driv
1,0/1,4
1,1/6,6
3,0
90,0
LOEDIGE/POWDER TURBO MIXERS
Type
Capacity (Ltr.)
M5
5,0
M-5 R
5,0
M-5 R
5,0
M5 R
5,0
M-5R
5,0
M-20
20,0
M-20 MK
20,0
Cyclomix 50
50,0
CYCLOMIX 50
50,0
T-50 FM2
50,0
Cyclomix 50
50,0
R7
75,0
FM-80 D 1Z
80,0
T0
100,0
T-100
100,0
FM-130 D
130,0
FM-130 D 1MZ
130,0
T-160
160,0
Turbumix TM-200
200,0
HT-2
250,0
HT-250
250,0
FKM-300 D
300,0
SD-600
300,0
KM-600D
300,0
FKM-300D
300,0
FKM-300D/1MZ
300,0
FKM-300D REI
300,0
FM-300D
300,0
FM-300D
300,0
FKM-300 D1Z
300,0
300,0
300,0
T-400 FM II
400,0
KT-400
400,0
400 E
400,0
Turbumix TM-400
400,0
FKM-600D
600,0
PSM-600 D-1 MZ
600,0
FKM-600D
600,0
FKM-600 D
600,0
FKM-600 D
600,0
FKM-600 D
600,0
FKM-600D/2Z
600,0
FKM-600D 2Z
600,0
FKM-600 D
600,0
FKM-600 D
600,0
FKM 600DA
600,0
Turbumix TM-630
630,0
T-630
630,0
Turbumix TM-630
630,0
T-630
630,0
FKM-900D
900,0
HT-1000
1000,0
WSM
1200,0
FKM-1200D
1200,0
FKM-1200D/2Z
1200,0
ZB-1500/1000
1500,0
TC-1600
1600,0
FKM-2000D/3Z
2000,0
T-2000 FMI
2000,0
WBHX-2400P
2400,0
FKM-3000D
3000,0
FKM-3000D
3000,0
H-3300 PH
3300,0
K-3500
3500,0
KM-4200D
4200,0
FKM-4200 D
4200,0
FKM-8000 D/6 Z 8000,0
FKM-15000D/12ZF15.000,0
FKM-15000D/12ZF15.000,0
FKM-15000D/12ZF15.000,0
FKM-15000D-12ZF15.000,0
FKM-15000D/12ZF15.000,0
Material
SS
SS
SS
SS
SS
SS
1.4571
1.4404
1.4404
SS
SS
Coated
SS
MS
SS
SS
SS
MS
1.4541
SS
SS
1.4541
MS
SS
1.4541
SS
MS
1.4571
SS
1.4541
SS
SS
SS
SS
SS
1.4541
SS
SS
SS
SS
1.4541
1.4541
SS
MS
1.4541
1.4541
MS
1.4541
MS
1.4541
SS
316
1.4541
SS
SS
SS
MS
1.4571
SS
MS
1.4301
1.4541
MS
1.4541
SS
SS
MS
SS
1.4571
1.4571
1.4571
1.4571
1.4571
Motor (kW)
0,75
0,75
0,75
0,75
0,75
1,5
1,5+1,0
30,0
30,0
4,0
15,0
3,0/5,5
3,7/4,4
3,0
5,0
4,0+4,0
2x 4,0
5,5
7,5
22,0
18,5
11,0
3,0
5,5
11,0
4,0
5,5
11/18,0
11,0/18,0
15,0
7,5
7,5+4,0
22,0
11,0
11,0+4,0
8,2/11,0
11,0
15,0
11,0
18,5
11,0
15,0
5,5
No motor
15,0
15,0
13,5
12,0/18,0
16,0/24,0
12,0/18,0
7,5
75,0
90,0+37,0
45,0
22,0
18,5
18,5+15,0
50,0
30,0
55,0+5,5
37,0/43,0
90,0
No motor
45,0
37,0
55,0
45,0
75,0
120/145
120/145
120/145
No motor
120/145
031A157, 1 CONICAL MIXER,
NAUTAMIX, stainless steel,
20 ltr., 0,55 kW.
245K203, 1 CONICAL MIXER,
HV-600, stainless steel, 600 ltr.,
+ chopper.
062I196, 1 CONICAL MIXER,
HOSOKAWA NAUTA, stainless
steel, 600 ltr., 4 kW + 0,37 kW.
069B391, 1 CONICAL MIXER,
NAUTAMIX, type MBXU-15 RW,
stainless steel, 1500 ltr., Jckt.,
11 kW + 0,55 kW.
066H281, 1 CONICAL MIXER,
type HV-2000, stainless steel,
2000 ltr., 4 kW.
084G413, 1 CONICAL MIXER,
HOSOKAWA, type 25-LFR-43,
stainless steel, 4000 ltr., Jckt., +
chopper.
073B405, 1 CONICAL MIXER,
HOSOKAWA, type 80 RB-4,
stainless steel, 8000 ltr.,
10,0/14,5 kW + 0,66/1,3 kW.
016F158, 1 CONICAL MIXER,
HOSOKAWA MICRON, type 100
RV-4, stainless steel, 10.000 ltr.,
11 kW+1,1 kW.
POWDER TURBO MIXERS
254K249, 1 LOEDIGE MIXER,
type M5R, stainless steel, 5 ltr.,
Jckt., 0,75 kW.
063G294, 1 LOEDIGE MIXER,
type M-20 MK, stainless steel, 20
ltr., Jckt. + chopper.
263K269, 1 LOEDIGE MIXER,
type FM-130 D, stainless steel,
130 ltr., 4 kW + chopper.
058B358, 1 LOEDIGE MIXER,
type FKM-300 D, stainless steel,
300 ltr., Jckt., 11 kW + chopper.
008H011, 1 RINGLAYER
MIXER, LOEDIGE, type CB-60P,
stainless steel, 550 ltr., Jckt.,
110 kW.
003C006, 1 LOEDIGE MIXER,
type FKM-600 D/2Z, stainless
steel, 600 ltr., 5,5 kW, 2 choppers.
217K070, 1 LÖDIGE MIXER,
type FKM-2000D/3Z, stainless
steel, 2000 ltr., 30 kW, + 3 choppers.
241K200, 1 POWDER TURBO
MIXER, MAP, type WBHX2400 P, stainless steel, 2400 ltr.,
37/43 kW.
247K224, 1 LOEDIGE MIXER,
type FKM-3000 D, stainless
steel, 3000 ltr., 90 kW, + 2 choppers, 2 nozzles.
257K262, 1 LOEDIGE MIXER,
type FKM-4200 D, mild steel,
4200 ltr., 45 kW, 4 choppers,
4 nozzles.
049G201, 1 LOEDIGE MIXER,
type KM-4200, stainless steel,
4200 ltr., Jckt., continuous,
5,5 kW.
061H328, 1 LOEDIGE MIXER,
type FKM-8000 D/6 Z, stainless
steel, 75 kW, + 6 choppers.
TUMBLER MIXERS
041B216, 1 CONTAINER
MIXER, SEGLER, type FR-100L,
stainless steel, 100 ltr., 4 kW.
025Y184, 1 TUMBLER
MIXER, BOSCH, stainless
steel, 250 ltr., 3 kW.
021F065, 1 SHAKER MIXER,
WAB, type T-10B, 0,37 kW.
163N782, 1 V-TYPE TUMBLER MIXER, material
stainless steel, 950 ltr., with
liquid injection and chopper.
A. Foeth b.v.
-
063E235, 1 SHAKER MIXER,
WAB, type Turbula T-500 C,
7,5 kW.
048A252, 1 TUMBLER MIXER,
SEEBECKWERFT WESER,
type TM 10-S, stainless steel,
1000 ltr., motor 1,1/1,6 kW.
Barneveld
The Netherlands
-
088B537, 1 V-TYPE TUMBLER
MIXER, ABBÉ, type RVB-10,
stainless steel, 500 ltr., 7,5 kW.
024B115, 1 TUMBLER MIXER,
SANDOZ SCHOLL, type
NG1200, stainless steel, 1200
ltr., 7,5 kW.
029F132, 1 CONTAINER MIXER WITH 8 CONTAINERS, ENGELSMANN, type CDM, stainless steel, with coating, 350 ltr.
045H154, 1 LINDOR
MIXER type L-2000, stainless steel, 2000 ltr., 3 kW.
Tel. 0031 (0)342415551
Fax 0031 (0)342417845
144P678, 1 ZIG-ZAG
TUMBLER MIXERAGGLOMERATOR, NIRO
ATOMIZER, stainless steel,
7,5/8,6 kW.
004Y028, 1 DOUBLE
CONE TUMBLER MIXER,
HOESCH, type DKM-3150,
stainless steel, 14.000 ltr.,
90 kW.
E-mail:
[email protected]
Website: www.foeth.nl
JANUARI 2017
4
UNIVERSAL MIXERS AND GRANULATORS
UNIVERSAL MIXERS/GRANULATORS
042W187, 1 UNIVERSAL
MIXER, HENSCHEL, type HU/G15, stainless steel 15 ltr., 1,1 kW,
+ chopper.
029G106, 1 UNIVERSAL
MIXER/DRYER, GUEDU, type
12, stainless steel, 18,5 ltr.,
vacuum, Jckt., 1,1 kW.
050F239, 1 VACUUM UNIVERSAL MIXER, AEROMATIC
FIELDER, type GP150, stainless steel, 150 ltr., Jckt., 11 kW,
+ chopper.
098A526, 1 UNIVERSAL MIXER,
RPA, type Novamix NX-400,
stainless steel, 400 ltr., Jckt.,
24 kW, + chopper.
041H133, 1 UNIVERSAL
MIXER, TK FIELDER, type PMA800/2G, stainless steel, 800 ltr.,
Jckt., 37 kW, + chopper (11 kW).
107T743, 1 UNIVERSAL MIXER,
THYSSEN HENSCHEL, type
HU/G 1750, stainless steel,
1750 ltr., 60/90 kW, + chopper.
086B542, 1 UNIVERSAL MIXER,
HENSCHEL, type HU/G-2300,
stainless steel, 2300 ltr., 64/90
kW, + chopper.
188MN157, 1 UNIVERSAL
MIXER, THYSSEN HENSCHEL,
type HU/G5000, stainless steel,
5000 ltr.
026A131, 1 VACUUM RIBBON
BLENDER, AMBLES, double
shaft, stainless steel, 100 ltr.,
Jckt.
013B033, 1 HIGH SHEAR
MIXER/GRANULATOR, COLLETTE, type Gral 300, stainless
steel, 300 ltr., 14,5/18,5 kW.
Material
SS
SS
316L
SS
SS
1.4541
SS
316L
SS
SS
SS
SS
SS
1.4404
316
316
SS
SS
SS
SS
1.4541
1.4541
SS
SS
Motor (kW)
1,1+0,5
1,1
Hydr.driv
4,5/6,2
DC Motor
7,5/11,0
Hydr. driv
14,5+4,5
12,5+5,5
Hydr. driv
30,0
36,0+5,5
37,0
36,0
26,0
37,0+11,0
20,0
60/90
64,0/90,0
55,0
63,0/85,0
062A304, 1 HIGH SHEAR MIXER/
GRANULATOR, COLLETTE, type
Gral-600, stainless steel, 600 ltr.,
36 kW.
RIBBON BLENDERS
RIBBON BLENDERS
036E144, 1 RIBBON BLENDER,
WP, stainless steel, 2,5 ltr.,
0,37 kW + electric heating.
Partnr.
Make
Type
Capacity (Ltr.)
064F333 ZANCHETTA
Rotolab
2,0
042W187 HENSCHEL
HU/G-15
15,0
026G106 GUEDU FRANCE
Type 12
18,5
040B264 ZANCHETTA SRL LUCCA Roto P-50
50,0
095B566 ZANCHETTA
Roto mix 120
120,0
098A536 LÖDIGE
MGT-125 P
125,0
100Z418 LÖDIGE PADERBORN
MGT-125 P
125,0
050F239 AEROMATIC FIELD
GP-150
150,0
084T495 COLLETTE
GRAL-150
150,0
004Y082 ZANCHETTA
Roto 200P
200,0
013B033 COLLETTE
GRAL-300
300,0
079A399 COLLETTE
GRAL-300
300,0
095B567 ZANCHETTA SRL ITALY Roto-300P
300,0
098A526 RPA AOUSTIN PROCESS Novamix 400
400,0
062A304 COLLETTE
GRAL-600
600,0
049Z225 COLLETTE
GRAL-600
600,0
081A493 COLLETTE
GRAL-600
600,0
035F152 COLLETTE
GRAL-600 PRO
600,0
041H133 TK FIELDER LTD
PMA-800/2G
800,0
085N421 GUEDU
1600 LE/PO
1600,0
107T743 THYSSEN HENSCHEL
HU/G 1750
1750,0
086B542 HENSCHEL
HU/G-2300
2300,0
086S374 FUKAE POWTEC
FS-GC-1200J
2400,0
188MN157 THYSSEN-HENSCHEL
HU/G 5000
5000,0
078H348, 1 RIBBON BLENDER,
stainless steel, 25 ltr., Jckt.,
1,1 kW.
032W094, 1 RIBBON BLENDER, SPANGENBERG, type
TMA-500, stainless steel, 500 ltr.,
Jckt., 15,5 kW.
Partnr.
036E144
104X554
078H348
218K174
026A131
032W94
099T613
203X712
094Y671
094P375
083H366
094Y670
171M709
033H111
033H118
033H159
033H116
147F710
058H373
058H372
003H009
003H008
Make
Type
Capacity (Ltr.)
WERNER & PFLEIDERER
2,5
ALPINE
K-15L
15,0
SRI VEENWOUDEN
25,0
AMIXON GMBH
AM-100
100,0
AMBLES ANDEVILLE
100,0
SPANGENBERG
TMA 500
500,0
SPANGENBERG
TMA-500
500,0
SPANGENBERG
500,0
FEHRE & CO. GMBH
550,0
ALPINE
KM 10
1000,0
WERNER & PFLEIDERER Simplex 17
1000,0
FEHRE & CO. GMBH
1260,0
ALPINE
KM 20
2000,0
DINNISSEN
2000,0
DINNISSEN
2000,0
SRI VEENWOUDEN
2000,0
SRI VEENWOUDEN
2000,0
DRAIS
2500,0
CORNELOUP S.A.
3000,0
CORNELOUP S.A.
3000,0
DRAISWERKE
S-3000
3000,0
DRAISWERKE
S-3000
3000,0
Material
SS
SS
SS
1.4404
SS
SS
SS
SS
1.4571
SS
MS
1.4571
SS
SS
304
1.4301
1.4301
SS
304L
304L
1.4541
1.4541
Motor (kW)
0,37
0,55
1,1
5,5
15,5
15/18
15,0
2,2
11,0
6,6
3,0
24,0
7,5
7,5
11,0
10,0
22,0
7,5
7,5
14,0/28,0
14,0/28,0
FOAM MIXERS
033H111, 1 RIBBON BLENDER,
DINNISSEN, stainless steel,
2000 ltr., 7,5 kW.
033H159, 1 RIBBON BLENDER,
SRI, stainless steel, 2000 ltr.,
11 kW.
003H008, 1 RIBBON BLENDER,
DRAIS, type S-3000, stainless steel, 3000 ltr., Jckt.,
14,0/28,0 kW.
058H373, 1 RIBBON BLENDER,
CORNELOUP, stainless steel,
3000 ltr., Jckt., 7,5 kW.
115Z441, 1 FOAM MIXER, MONDOMIX, stainless steel, Jckt.
097A495, 1 FOAM MIXER,
MONDOMIX, type E-50, stainless
steel, Jckt., 15 kW.
PADDLE MIXERS
PADDLE MIXERS
229K161, 1 DOUBLE SHAFT
PADDLE MIXER, FORBERG,
type F-20-H-LAB, stainless steel,
20 ltr., 2,2 kW.
079F431, 1 DOUBLE SHAFT
PADDLE MIXER, TATHAM, type
WT-400 LTR, stainless steel,
400 ltr., 5,5 kW.
269K287, 1 DOUBLE
SHAFT PADDLE
MIXER, stainless
steel, 75 ltr., 4 kW.
213K041, 1 DOUBLE SHAFT
PADDLE MIXER, CHEMPLANT,
type F-60, stainless steel, 60 ltr.,
3 kW.
235K164, 1 DOUBLE SHAFT
PADDLE MIXER, FORBERG,
type F-750 PMS, stainless steel,
750 ltr., 11 kW.
093B570, 1 DOUBLE
SHAFT PADDLE
MIXER, FORBERG,
type F1500+FDB,
mild steel, 1500 ltr.,
37 kW.
A. Foeth b.v.
041H143, 1 PADDLE
MIXER, JENSEN,
type JMT-3000, mild
steel, 3000 ltr., 75 kW.
-
010B067, 1 DOUBLE SHAFT
PADDLE MIXER, FORBERG,
type F120S, stainless steel,
120 ltr., 1,9 kW.
229K105, 1 DOUBLE SHAFT
PADDLE MIXER, WOLFKING,
type TSM-850 L, stainless steel,
850 ltr., 2x 4 kW.
104X554, 1 TRUNCATED CONE
MIXER, ALPINE,
type K-15L, stainless
steel, 15 ltr., 0,55 kW.
Barneveld
The Netherlands
-
061H332, 1 PADDLE MIXER,
BÜHLER, stainless steel, 250 ltr.,
3 kW.
Partnr.
016A150
064Y421
113X585
229K161
213K041
269K287
010B067
066G344
066G345
066G346
061H332
066G343
079F431
079F430
008H011
053P249
045R150
235K164
082G399
229K105
096Z370
271K296
271K295
271K294
271K297
093B570
041H143
Make
Type
VAN BEEK
VOMM MILANO
FORBERG
FORBERG/CHEMPL
TR-200
TMR1
F-20 LH-LAB
F-60
Capacity (Ltr.)
FORBERG CANADA
EMDE NASSAU
EMDE NASSAU
EMDE NASSAU
BÜHLER
EMDE NASSAU
TATHAM/FORBERG
TATHAM/FORBERG
LOEDIGE
AVA-HUEB GMBH
AVA-HUEB GMBH
FORBERG A/S
F-120 S
WOLFKING A/S
VELATI MILANO
GERICKE AG
GERICKE AG
GERICKE AG
GERICKE AG
HALVOR FORBERG A/S
JENSEN GMBH
TSM-850L
WT-400 LT Mix
WT-400 LT Mix
CB-60 P
HRM 600
HRM 600
F-750
GMS-1200
GMS-1200
G<MS-1200
GMS-1200
F-1500
JMT-3000
20,0
60,0
75,0
120,0
125,0
125,0
125,0
250,0
250,0
400,0
400,0
550,0
700,0
700,0
750,0
800,0
850,0
1000,0
1200,0
1200,0
1200,0
1200,0
1500,0
3000,0
Material
SS
SS
316
316L
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
1.4541
SS
SS
SS
SS/MS
SS
SS
1.4541
1.4541
1.4541
1.4541
MS
MS
Motor (kW)
No motor
2,2+1,5
2,2
3,0
4,0
2,0+0,55
2,2
2,2
2,2
3,0
5,5
5,5
5,5
110,0
55,0
55,0
11,0
7,5
2x 4,0
15,0
15,0
15,0
15,0
37,0
75,0
096Z370, 1 DOUBLE SHAFT
PADDLE MIXER, VELATI, stainless steel, 1000 ltr,. with lifting
device.
171M709, 1 TRUNCATED CONE
MIXER, ALPINE,
type KM20, stainless
steel, 2000 ltr., 24 kW.
017C108, 1 INTENSE
MIXER, ZYKLOS,
type ZB1500/1000,
mild steel, 1500 ltr.,
15 kW+18,5 kW +
7,5 kW.
Tel. 0031 (0)342415551
Fax 0031 (0)342417845
063C288 1 INTENSIVE HIGH
SPEED SHEAR MIXER,
HOSOKAWA MICRON, type
Cyclomix 50, stainless steel,
50 ltr., Jckt., 30 kW.
218K174, 1 AMIXON CONICAL
MIXER, type AM-100, stainless
steel, 100 ltr., 5,5 kW.
E-mail:
[email protected]
Website: www.foeth.nl
JANUARI 2017
5
VACUUM PROCESSING VESSELS
PROCESSING VESSELS
Partnr.
173M672
208K029
087F445
033C064
004Y057
063F292
107S404
208K028
026G114
100Z417
056Y336
046C161
062R251
089Z336
032E107
088F463
061H272
013X045
010E098
035C080
061H273
084W393
035C079
015H039
004Y045
218K054
085A411
084W395
066F303
044T383
079P423
040Z162
104X551
073C355
Make
BROGLI
ESCO LABOR
UNIMIX H&R
FRYMA RHEINFELDEN
PRESSINDUSTRIA S.P.A.
BROGTEC GMBH
FILLWORTH
IKA WERKE
FRYMA AG
BECOMIX
UNIMIX HAAGEN&RINAU
FRYMA AG
KRIEGER
FRYMA
NANYANG INDUSTRY
FRYMA AG
ESCO-LABOR
BROGLI
FRYMA
RAYNERI MONTAIGU
ESCO-LABOR
HAAGEN & RINAU
BECOMIX
HAAGEN & RINAU
HAAGEN & RINAU
COMEC ITALY
FRYMA RHEINFELDEN
WOLFF APPARATEBAU
HAAGEN&RINAU
HAAGEN & RINAU
HAAGEN+RINAU
BROGLI AG
OSKAR KRIEGER
BECOMIX STUHR
Type
Capacity (Ltr.)
BCKA 750
EL-1
1,0
5,5
VME-6
6,0
TE.3/SV/R/5
7,0
MH-5
8,9
10,0
Master plant 10
12,0
VME-12
12,0
RW-15
15,0
SR-15
15,0
VME-20
20,0
MMU-20
20,0
VME-20
20,0
20,0
VME-20
20,0
EL-20
20,0
MH-20C-1536
25,0
DT-50
50,0
MXR-50 Multimix
50,0
EL-50
50,0
SR-3/100
150,0
RW-15
12,0
175,0
SR-200
265,0
CVM-500
500,0
VME-500
500,0
VUM-400 Pharma 516,0
Unimix SR-500
750,0
SR-1000
1422,0
SRM 1250 S
1547,0
MH-2000
2000,0
MMU-2500
2870,0
RW-5000 S
5000,0
035C079, 1 VACUUM PROCESSING VESSEL, BECOMIX,
type RW-15, stainless steel, 23
ltr., Jckt., + homogenizer.
Material
SS
Glass
SS
SS
SS
1.4571
SS
1.4404
SS
1.4571
SS
316
SS
SS
SS
SS
SS
1.4301
SS
316L
SS
SS
SS
1.4541
SS
SS
SS
1.4571
1.4541
SS
SS
1.4301
1.4301
1.4541
Motor (kW)
0,150+0,250
900 Watt
0,75+0,5
0,22+0,55
2x 0,37
Pneu/Hydr.
0,18+4,0
0,5+0,12
0,37
0,37+1,1
1,1+0,75
1,1+0,75
0,37+1,5
0,75
2,2+0,55
1,5+4,0
0,75+3,0
2,2+0,75
2,2+1,1
0,37+2,5
1,5+2,2
3,0
5,5/7,8
7,5
5,5+11,0
5,5+11,0
7,5+11,0
7,5
12,0+21,0
4,0+12/22
15,0+45,0
056Y336, 1 VACUUM PROCESSING VESSEL, UNIMIX,
type SR-15, 26 ltr., stainless
steel, Jckt., with homogenizer.
218K054, 1 VACUUM PROCESSING
VESSEL, COMEC, type CVM-500,
stainless steel, 500 ltr., Jckt. 1,5 kW,
+ homogenizer (5,5/7,8 kW).
085A411, 1 VACUUM
PROCESSING VESSEL,
FRYMA, type VME-500,
stainless steel, 500 ltr.,
Jckt., with homogenizer.
208K029, 1 VACUUM
PROCESSING VESSEL,
ESCO, type EL-1, glass,
1 ltr., + homogenizer.
087F445, 1 VACUUM
PROCESSING VESSEL,
UNIMIX, stainless steel,
5,5 ltr., Jckt., with homogenizer.
244K218, 1 HEAT EXCHANGER, stainless steel,
1 m 2.
218K059, 1 HEAT EXCHANGER, stainless steel,
3,5 bar.
033H169, 1 HEAT EXCHANGER, stainless steel,
5,65 m2.
A. Foeth b.v.
-
033C064, 1 VACUUM
PROCESSING VESSEL,
FRYMA, type VME-6,
stainless steel, 6 ltr., Jckt.,
with homogenizer.
208K028, 1 VACUUM
PROCESSING VESSEL,
IKA, type MP-10, stainless steel, 12 ltr., Jckt.,
+ homogenizer.
THIS IS JUST A SELECTION OF WHAT WE HAVE.
MUCH MORE AVAILABLE ON OUR WEBSITE WWW.FOETH.NL
089Z336, 1 VACUUM
PROCESSING VESSEL,
FRYMA, type VME-20,
20 ltr., stainless steel,
Jckt., with homogenizer.
079P423, 1 VACUUM
PROCESSING VESSEL,
HAAGEN + RINAU, type
SRM 1250 S, stainless
steel, 1547 ltr., Jckt, +
homogenizer.
013X045, 1 VACUUM
PROCESSING VESSEL,
BROGLI, type MH-20C,
stainless steel, 20 ltr.,
Jckt., with homogenizer.
073H322, 1 HEAT EXCHANGER, stainless steel,
8 m2.
268K278, 1 HEAT EXHANGER, stainless steel,
18,5 m2.
062H239, 1 HEAT EXCHANGER, stainless steel,
20 m2.
026F109, 1 HEAT EXCHANGER, stainless steel,
42 m2.
Barneveld
The Netherlands
-
010E098, 1 VACUUM
PROCESSING VESSEL,
FRYMA, type DT 50,
stainless steel, Jckt., +
homogenizer.
040Z162, 1 VACUUM PROCESSING
VESSEL, BROGLI, type MH-2000,
stainless steel, 2000 ltr., with homogenizer.
HEAT EXCHANGERS TUBE/SHELL APPROX. 110 OFF AVAILABLE
HEATING SURFACES 0,5 M2 UP TO 60 M2
244K219, 1 HEAT EXCHANGER, stainless steel,
1 m 2.
063F292, 1 VACUUM
PROCESSING VESSEL,
BROGTEC, type MH-5,
stainless steel, 8,9 ltr.,
Jckt., with homogenizer.
035C080, 1 VACUUM PROCESSING VESSEL,
RAYNERI, type MXR-50, 50 ltr., stainless steel, Jckt.
104X551, 1 VACUUM
PROCESSING VESSEL, KRIEGER, type
mmu-2500, stainless
steel, 2870 ltr., Jckt, with
homogenizer.
073C355, 1 VACUUM PROCESSING
VESSEL, BECOMIX, type RW-5000S,
stainless steel, 6755 ltr., Jckt., + homogenizer, + 2 vessels.
SCREW CONVEYORS APPROX. 50 OFF AVAILABLE
LENGTHS 0,5 M UP TO 10 MTS.
201K008, 1 VIBRO FEEDER, stainless steel, Dia. 250x2000 mm.
223K136, 1 CONVEYOR SCREW,
stainless steel, Dia. 200x3200 mm.
095F509, 1 SPIRAL
219K067, 1 VIBRO FEEDER, stainCONVEYOR, JOEST, 033H106, 1 CONVEYOR SCREW,
less steel, 500x3000 mm, 2x 0,45 kW. type WUFS, stainstainless steel, Dia. 180x3900 mm.
less steel, Height
4150 mm, Jckt.
093U734, 1 HORIZONTAL CONVEYOR SCREW, stainless steel,
Dia. 250x2250 mm.
223K137, 1 CONVEYOR SCREW,
stainless steel, Dia. 300x5200 mm.
235K162, 1 HORIZONTAL CONVEYOR SCREW, stainless steel, Dia.
280x1800 mm.
038F179, 1 HORIZONTAL CONVEYOR SCREW, stainless steel,
Dia. 600x7500 mm.
071H370, 1 VERTICAL CONVEYOR SCREW, stainless steel, Dia.
250x3500 mm.
Tel. 0031 (0)342415551
Fax 0031 (0)342417845
004Y079, 1 SPIRAL
CONVEYOR, VIBRA,
type WF 8/4-50-DV,
062H238, 1 HORIZONTAL CONstainless steel, Height VEYOR SCREW, stainless steel,
5000 mm.
Dia. 200x9500 mm.
E-mail:
[email protected]
Website: www.foeth.nl
JANUARI 2017
6
REACTORS/PRESSURE VESSELS/STIRRING VESSELS
060X656, 1 REACTOR,
SCHRADER, stainless
steel, 85 ltr., vac./6 bar, Jckt.
(6 bar), 1,3 kW.
029G101, 1 REACTOR,
HAAGE, type 1220, stainless steel, 1 ltr., 200 bar,
electric heating.
078H346, 1 REACTOR, SRI
VEENWOUDEN, stainless
steel, 35 ltr., 50 bar, Jckt.
(10 bar), var. speed.
037F166, 1 REACTOR,
PACKO, stainless steel,
70 ltr., vac./7 bar, Jckt.
(11 bar), 0,25 kW.
033H165, 1 REACTOR,
MCL, stainless steel,
1500 ltr., vac./6 bar, Jckt.
(6 bar), 3,6 kW.
027G093, 1 REACTOR,
DE RIJK, stainless steel,
745 ltr., 2,5 bar, Jckt.
(2,5 bar).
026F101, 1 REACTOR,
VOEGELE, Hastelloy,
860 ltr., 6 bar, Jckt. (20 bar),
1,5 kW.
060C276, 1 REACTOR, HOEKSEMA
AND VELT, stainless steel, 140 ltr.,
9 bar, 4 kW.
040F273, 1 REACTOR, SCHÖLLERBLECKMANN, stainless steel, 230 ltr.,
47 bar, Jckt. (6 bar), 2,6 kW.
085C500, 1 REACTOR,
MONTAIR ANDERSEN,
Hastelloy, 160 ltr., Jckt.,
5,5 kW.
013X061, 1 REACTOR, ROMABAU/MIRAP, stainless
steel, 1443 ltr., vac./5 bar, Jckt. (7 bar), 3 spiral stirrers
and scraper.
050C541, 1 REACTOR, ZSCHOKKE,
1000 ltr., stainless steel, 40 bar, Jckt. (12
bar), 10 kW.
270K283, 1 PHARMA
STIRRING VESSEL,
HAAGEN+RINAU, stainless
steel, 605 ltr., vac./2 bar,
Jckt. (4 bar), 1,5 kW.
218K052, 1 VERTICAL
PRESSURE VESSEL,
BINDER, Hastelloy, 1000 tr.,
vac./3 bar, Jckt. (6 bar).
023G075, 1 STIRRING
VESSEL, FIB, stainless
steel, 3400 ltr., Jckt. (6 bar),
1,1/2,5 kW, + ultra turrax
(17,5 kW)
132X770, 1 STIRRING
VESSEL, HOESCH, type
GK6/3500/SO, Hastelloy
c.2.4610, 3500 ltr., Jckt.,
9,2+7,5 kW.
050F340, 1 REACTOR, SCHÖLLERBLECKMANN, type Autoklav 1000,
stainless srteel, 1152 ltr., 47 bar, Jckt.
(6 bar), 5,5 kW.
042B288, 1 REACTOR, GTI-FIB, stainless steel, 1300 ltr., vac./23 bar, Jckt. (23
bar), 0,75 kW.
GLASS LINED REACTORS APPROX. 60 OFF AVAILABLE
029G104, 1 REACTOR, 071F358, 1 REACTOR,
PFAUDLER, glass lined, DE DIETRICH, type
16 ltr., Jckt., 0,55 kW.
AE100, glass lined,
129 ltr., vac./6 bar, Jckt.
(6 bar), 1,5 kW.
026F103, 1 REACTOR,
DE DIETRICH, type
AE-63 L, glass lined,
90 ltr., vac./ 6 bar, Jckt.
(6 bar), 1,1 kW.
005H007, 1 REACTOR, PFAUDLER, type
AE-250, glass lined, 335
ltr., vac./6 bar, Jckt. (6
bar), 2 kW.
026F107, 1 REACTOR, PFAUDLER, type
DG-500, glass lined,
635 ltr., vac./ 6 bar, Jckt.
(6 bar), 3 kW.
047T262, 1 REACTOR,
THALE, glass lined,
1475 ltr., vac./6 bar, Jckt.
(6 bar), 5 kW.
006W034, 1 REACTOR PFAUDLER, type
BE 1600, glass lined,
2322 ltr., vac./3 bar, Jckt.
(6 bar), 11 kW.
067G290, 1 REACTOR, PFAUDLER, type
BE2500, glass lined,
3472 ltr., vac./6 bar, Jckt.
(vac./6 bar), 6,8 kW.
091F467, 1 REACTOR,
DE DIETRICH, glass lined,
127 ltr,. vac./6 bar, Jckt. (13 bar),
1,1 kW.
071E336, 1 REACTOR,
PFAUDLER, type 250L, glass
lined, 330 ltr., vac./10 bar, Jckt.
(6 bar), 2,5 kW.
050F343, 1 REACTOR,
DE DIETRICH, type AE-400,
glass lined, 545 ltr., vac./6 bar,
Jckt. (7 bar), 1,35 kW.
071F409, 1 REACTOR,
PFAUDLER, type T-800, glass
lined, 865 ltr., vac./12 bar, Jckt.
(6 bar), 4 kW.
058H377, 1 REACTOR,
DE DIETRICH, type CE2500,
glass lined, vac./6 bar, Jckt.
(6 bar), 7,5/8,6 kW.
074G388, 1 REACTOR,
DE DIETRICH, glass lined,
3510 ltr., vac./6 bar, Jckt. (7 bar),
5,5/8,5 kW.
033H186, 1 REACTOR,
PFAUDLER, type E-4000, glass
lined, 4890 ltr., vac./6 bar, Jckt.
(20 bar), 11,0/16,0 kw.
069W351, 1 REACTOR, DE
DIETRICH, type AE-4000L, glass
lined, 5388 ltr., vac./6 bar, Jckt.
(8 bar).
033H110, 1 REACTOR,
THALETEC, type E-6000, glass
lined, 7100 ltr., vac./6 bar, Jckt.
(6 bar).
039E135, 1 REACTOR,
PFAUDLER, type E-8000, glass
lined, 9055 ltr., vac./4 bar, Jckt.
(6 bar), 7,5 kW.
033H184, 1 REACTOR,
THALETEC, type RWA
BE-12500, glass lined,
14.350 ltr., vac./6 bar, Jckt.
(15 bar), 18,5 kW.
055G297, 1 REACTOR,
DE DIETRICH, type BE 16000,
glass lined, 18.169 ltr., vac./6 bar,
Jckt. (6 bar), 22 kW.
A. Foeth b.v.
-
Barneveld
The Netherlands
-
Tel. 0031 (0)342415551
Fax 0031 (0)342417845
E-mail:
[email protected]
Website: www.foeth.nl
JANUARI 2017
7
REACTORS/PRESSURE VESSELS/STIRRING VESSELS
050C476, 1 REACTOR, KÜHNI, stainless steel, 1600 ltr., vac./3,2 bar, Jckt.
(16 bar), 3,6 kW.
091F533, 1 REACTOR, OLTEN, stainless steel, 2325 ltr., vac./6 bar, Jckt.
(13 bar), 7,5 kW.
050C441, 1 REACTOR, SCHOLL, stainless steel, 3475 ltr., vac./3,2 bar, Jckt.
(13 bar), 3,6 kW.
091F526, 1 REACTOR, ROMABAU,
stainless steel, 4000 ltr., vac./3,2 bar,
Jckt. (13 bar), 5,5 kW.
033H190, 1 REACTOR, NNRI, stainless steel, 5000 ltr., vac./20 bar, Jckt.
(10 bar), 15 kW.
004B184, 1 REACTOR, GRIESSER,
stainless steel, 5.200 ltr., vac./30 bar, Jckt.
(10 bar), 11 kW.
091F531, 1 REACTOR, CATTANEO,
stainless steel, 5440 ltr., vac./6 bar, Jckt.
(13 bar), 10 kW.
070A368, 1 REACTOR, R.V.H., stainless steel, 6200 ltr., vac./3 bar, Jckt.
(4 bar), 11 kW.
050C392, 1 REACTOR, ROMABAU,
stainless steel (BN2/316), 6300 ltr.,
vac./3,2 bar, Jckt. (16 bar), 7,3 kW.
071E326, 1 REACTOR, SANDOZ, stainless steel, 6300 ltr., vac./3,2 bar, Jckt.
(16 bar), 17,5 kW.
218K056, 1 STIRRING VESSEL,
PROMINOX NEVERS, stainless steel,
8020 ltr., Jckt., 11 kW.
062E216, 1 REACTOR, HAGEMANN,
stainless steel, 8200 ltr., vac./3,2 bar,
Jckt. (16 bar), 17,5 kW.
071E320, 1 REACTOR, ALPHA, stainless steel, 8580 ltr., vac./3,2 bar, Jckt.
(16 bar), 13,5 kW.
268K276, 1 REACTOR, KLEISER,
stainless steel, 8625 ltr., vac./6 bar, Jckt.
(13 bar), 30 kW.
058H379, 1 REACTOR, stainless steel,
8725 ltr., vac./6 bar, Jckt. (12 bar),
18,5 kW.
YOU CAN FIND OUR COMPLETE LIST ON OUR WEBSITE WWW.FOETH.COM
073R321, 1 REACTOR, VAN OOSTENDORP, stainless steel 10.900 ltr.,
vac./8 bar, Jckt. (7 bar), 18,5 kW.
079G410, 1 REACTOR, ADM
CHAUDRONNERIE, stainless steel,
904L, 11.000 ltr., vac./4,5 bar, Jckt.
(6 bar), 15 kW.
050C536, 1 REACTOR, ALPHA, stainless steel, 11.600 ltr., vac./6 bar, Jckt.
(13 bar), 11,5/15 kW.
035B239, 1 REACTOR, COTI, stainless
steel, 12.303 ltr., vac./3 bar, Jckt. (4 bar)
1,5 kW.
035B247, 1 REACTOR, COTI, stainless
steel, 12.520 ltr., vac./3 bar, Jckt. (4 bar),
22 kW + 9 kW.
071E325, 1 REACTOR, STIHLER,
stainless steel, 13.100 ltr., vac./2 bar,
Jckt. (6 bar), 6,8 kW.
016G066, 1 REACTOR, RHE, stainless
steel, 13.146 ltr., vac./3 bar, Jckt. (6 bar),
5,5 kW.
071E319, 1 REACTOR, ALPHA, stainless steel, 13.670 ltr., vac./3,2 bar, Jckt.
(16 bar), 30 kW.
004B158, 1 REACTOR, ELLINGHAUS,
stainless steel, 15.500 ltr., vac./7 bar,
Jckt. (9 bar), 4 kW.
104X552, 1 REACTOR, PASS + CO,
stainless steel, 14.540 ltr., vac./20 bar,
Jckt. (20 bar).
016G064, 1 REACTOR, RHE, stainles
steel, 20.610 ltr., vac./3 bar, Jckt. (6 bar),
28,0/40,0 kW.
035B249, 1 REACTOR, COTI, stainless
steel, 19.254 ltr., vac/3 bar, Jckt. (4 bar),
4 kW.
117W606, 1 REACTOR, ZEPPELIN,
stainless steel, 19.370 ltr., 40 bar, Jckt.
(6 bar), 55 kW.
050Y546, 1 REACTOR, FIB, stainless
steel, 20.800 ltr., 0,5 bar, Jckt. (2 bar),
7,5 kW.
061H364, 1 REACTOR, INOXMAURER, stainless steel, 21.050 ltr.,
vac./3,2 bar, Jckt. (16 bar), 3 kW.
035B232, REACTOR COSMIT, stainless steel, 20.158 ltr., vac./3 bar, Jckt.
(4 bar), 4 kW.
032C096, 1 HORIZONTAL STIRRING
VESSEL, JONGIA, stainless steel
20.000 ltr., –0,5/1,0 bar, 3 kW.
062E228, 1 STIRRING VESSEL,
LECHMANN, stainless steel, 21.000
ltr., vac./3,2 bar, 5,5 kW, with “Ruvastar”
stirrer.
071E303, 1 REACTOR, ALPHA, stainless steel, 21.230 ltr., vac./3,2 bar, Jckt.
(16 bar), 24 kW.
016G073, 1 REACTOR, JACKSON,
stainless steel, 21.450 ltr., 0,5 bar, Jckt.
(6 bar), 7,5 kW.
059Z221, 1 STIRRING VESSEL, EDEL,
stainless steel, 23.230 ltr., 5 kW+6,8 kW.
035B236, 1 REACTOR, COTI, stainless
steel, 24.230 ltr., vac./3 bar, Jckt. (4 bar),
4 kW.
050Y545, 1 REACTOR, FIB, stainless
steel, 30.000 ltr., vac./1 bar, Jckt.
(2,4 bar), 7,5 kW.
218K084, 1 REACTOR, CELLIER,
stainless steel, 42.100 ltr., 1 bar, Jckt.
(6 bar), 40 kW.
063R308, 1 REACTOR, ACOMETI,
1985, stainless steel, 50.000 ltr., 3,5 bar,
half coil Jckt. (5 bar), 15 kW.
A. Foeth b.v.
-
Barneveld
The Netherlands
-
Tel. 0031 (0)342415551
Fax 0031 (0)342417845
E-mail:
[email protected]
Website: www.foeth.nl
JANUARI 2017
8
GRINDERS – BREAKERS
SIZE REDUCTION/MILLS
Partnr.
135K418
080T475
044P190
026B131
176I573
278D1014
015F058
043H152
039T213
001W014
214Y698
030H081
030H082
010H020
010H021
010H018
059G275
003A052
077H385
075B494
040C134
256K252
158P833
089S309
090A437
001A043
237K181
131M459
046C162
019W121
244K209
244K210
015G035
047T238
012Y140
012Y139
012Y138
012Y118
050A273
244K208
031A173
027E101
237K221
085C501
085F457
123N602
033H161
071W369
043R200
100E4527
091C420
017B456
017B457
004Y030
059C265
059C266
104A559
160P705
064W265
058B359
059F263
033H117
100Y740
101A517
173K675
075H314
220K066
220K065
167K649
030Z132
077H384
124S572
126E627
135H610
123Y833
011K023
179I589
123Y834
125Z497
072K206
100Y738
045G317
041Z174
041Z173
041Z170
041Z171
029H155
052P271
217K074
217K073
070Y762
217K072
091I316
124N611
094Y625
021U227
215B1017
050W221
073A348
081T491
081T492
016A134
016A133
Make
Type
Dia. (mm)
TEMA
Vibraton
HOELSCHERTECHNIK
GORATOR
ALPINE
63 C
63
FRYMA AG
JMRS-80
80
ZEHNDER
100
ZEHNDER
110
NETZSCH-CONDUX
Conjet 16-11-DS
120
BAUERMEISTER
UTL-USCHL
125
UDY
Cyclone sample
125
RETSCH
SR-2
135
MICRO ATOMIZER
5 MA
140
SWECO USA
Vibro M18-5-01
145
SWECO USA
Vibro finishing
145
URSCHEL
MG-1700
150
URSCHEL
MG-17800
150
URSCHEL
MG-1700
150
NETZCH GMBH
CUM 150-SP-DN1
150
APEX
MPX 3-348
150
URSCHEL IUSA
Comitrol 1700
155
CONDUX HANAU
CLVZM 15/5
160
NEA NEUMANN & ESSER ICM 2,4-95/158
160
180
PALLMANN GMBH
PXL-18
180
200
MICROTEC GMBH
UTM-200
200
BAUER BROS OHIO
Type 148 Size 8
200
FITZPATRICK
Fitzmill M5A
200
ALPINE
250 UP
250
SHARPLES-STOKES
Tornado Mill
250
KEK LTD
4B2
250
STOKES PENNWALT
Tornado mill
250
PENNWALT FRANCE
Tornado mill
250
STOKES
Tornado 44-0
250
ALPINE
250
250
HOSOKAWA MICRON
VP-1
260
HOSOKAWA MICRON
VP-1
260
HOSOKAWA MICRON
VP-1
260
HOSOKAWA MICRON
VP-1
260
HOSOKAWA MICRON
G-1030
260
FITZPATRICK
D6A Communitor
260
APEX
Comminuting 114
260
APEX CONSTRUCTION 114 DW-SF
260
FREWITT S.A.
MFH-6 Atex
270
THE FITZPATRICK
D6A comminutor
270
280
HOSOKAWA MICRON
FM 2
280
ALPINE AUGSBURG
B-315 P
295
PEPPINK
300-W
300
ENGELSMANN
MFL 85N/80-E1
300
BOHMTEN
R5
300
BAUERMEISTER & CO. UT-12
305
THE PASCALL
Model NO. 2
345
THE PASCALL
Model NO. 2
345
SPANGENBERG
Secomat
365
CONDUX HANAU
H-35
390
CONDUX HANAU
H-35
390
ISMAR MASCHINEN
JUNIOR VHS
400
PALLMANN
PP 4
400
PALLMANN
REF-4
400
FORPLEX INDUSTRIE
FNG-3
430
BAUERMEISTER
UT-33
440
ALPINE AUGSBURG
B-500 P
445
BAUERMEISTER
UT-22
450
PASCALL ENGINEE
Model NO. 3
450
450
HOSOKAWA MIKROP
ACM-30
465
KEMUTEC GROUP
2-HM
480
KEK GARDNER
2-HM
480
500
CONDUX
CST-680/G
550
PALLMANN GMBH
PPS-6-180
590
PALLMANN
REF 6
600
WINBERGS
60-50 T6B
600
600
DERICHS UEBACH
JDP 60-80
600
ROTOM VERKSTAED
1-78
600
600
DERICHS UEBACH
JDP 60-80
600
PALLMANN
PHM-600X350
600
ROTOM VERKSTAED
1-78
600
BAUERMEISTER
UT-32
600
HOSOKAWA MICRON
VP-4
630
FORPLEX
FL-4
650
FORPLEX
FL-4
650
FORPLEX
FL-4
650
FORPLEX
FL-4
650
ALPINE AUGSBURG
710-CWS
710
SWECO
DM 3
750
BAUERMEISTER
UT-42
780
BAUERMEISTER
UT-42
780
BAUERMEISTER
UT-42/USCH-42
780
BAUERMEISTER
UT-42
780
PALLMANN
REF 8
800
AUBEMA
2508/8
800
CONDUX
HR9/N3
900
WILLIAM BOULTON
AM-2
1100
PALLMANN
REF 12
1120
BAUERMEISTER
UT-62
1200
BAUERMEISTER
UT-62
1200
HEINRICH WIGGER
RW 14/8
1400
HEINRICH WIGGER
RW 14/8
1400
BAUERMEISTER
UT-42
800
BAUERMEISTER
UT-42 SL
800
057F261, 1 ROLL BREAKER, BAUERMEISTER, type
ZWR-252, stainless steel, Dia.
250x900 mm, 11 kW.
016A135, 1 LUMP BREAKER,
stainless steel, Dia. 160x450 mm,
5,5 kW, + feeder.
Width (mm)Motor (kW)
2,2
2,5
No motor
316
2 HP
3,5 PS
1,5
50
1,8/2,2
± 1,0
No motor
50
5,5
175
0,25
175
0,25
22,0
22,0
22,0
4,0
0,75
75
22,0
1,1
2,2
15,0
5,5
18,5
190
9,0
15,0
105
3,0/3,5
80
11,0
120
4,0
4,0
120
5,0
120
5,2
120
3,3
3,6
7,5/8,6
7,5/8,6
7,5/8,6
7,5/8,6
7,5
140
5,5
150
295
22,0/30,0
140
4,0
140
4,0
320
5,5
300
5,5
6,8
5,5
150
24,0
5,5
115
12/14,5
0,75
0,75
80
7,5
No motor
No motor
100
11,0
15,0+7,5
22,0
185
37,0
18,5
13,5
18,5
1,5
No motor
22,0+4,0
45,0
55,0
300
22,0
45,0
175
55,0+30,0
30,0
500
No motor
No motor
200
37,0
800
90,0
55,0
200
37,0
350
75,0
800
132,0
180
37,0
400
55,0
75,0
75,0
75,0
75,0
2x 74
250
0,82
200
75,0
200
75,0
220
37,0
200
75,0
No motor
800
45,0
13,0
1,5
200
No motor
No motor
400
110,0
240
75,0
240
75,0
220
45,0
220
45,0
043H152, 1 CRYOGENIC
MILL, BAUERMEISTER,
type UTL-USCHL, stainless steel, Dia. 125 mm,
1,8/2,2 kW.
237K221, 1 HAMMER
MILL, FREWITT, type
MFH-6 Atex II 2, stainless
steel, Dia. 270x140 mm,
4 kW.
075H314, 1 CLASSIFIER
MILL, HOSOKAWA, type
ACM-30, stainless steel,
Dia. 490 mm, 22 kW +
4 kW.
040C134, 1 IMPACT
CLASSIFYING MILL,
NEA, stainless steel, Dia.
160 mm, + cyclone + filter.
059G275, 1 TURBO MILL,
NETZSCH-CONDUX, type CUM
150-SP-DN1, stainless steel, Dia.
150 mm, 4 kW.
091C420, 1 GRINDING LINE,
BAUERMEISTER, type UT-12,
stainless steel, Dia. 305x115
mm, 12,0/14,5 kW.
231K181, 1 HAMMER MILL,
FITZPATRICK, type Fitzmill
M5A, stainless steel, Dia.
200x105 mm, 3,0/3,5 kW.
244K208, 1 HAMMER MILL,
FITZPATRICK, type D6A, stainless steel, Dia. 260x140 mm,
5,5 kW.
033H161, 1 PERPLEX UNIVERSAL MILL, ALPINE, type B-315,
stainless steel, Dia. 295 mm,
6,8 kW.
033H117, 1 PERPLEX UNIVERSAL MILL, ALPINE, type B-500,
stainless steel, Dia. 445 mm,
13,5 kW.
030Z132, 1 PIN DISC MILL,
CONDUX, type CST-680/G,
Dia 550 mm, 45 kW.
220K066, 1 PIN DISC MILL,
KEMUTEC, type 2 HM, Dia.
480 mm, 45 kW.
244K209, 1 HAMMER MILL,
STOKES, type 44F, stainless
steel, Dia. 250x120 mm, 5 kW.
077H384, 1 CONTRA SELECTOR MILL, PALLMANN, type
PPS-6-180, Dia. 590x175 mm,
55 kW + 30 kW.
217K073, 1 TURBO MILL,
BAUERMEISTER, type UT-42,
Dia. 780x200 mm, 75 kW.
016A134, 1 TURBO MILL,
BAUERMEISTER, type
UT-42, stainless steel, Dia.
780x220 mm, 45 kW.
059F263, 1 TURBO MILL,
BAUERMEISTER, type UT-33,
Dia. 440 mm, 18,5 kW.
100Y738, 1 TURBO MILL,
BAUERMEISTER, type UT-32,
Dia. 600x180 mm, 37 kW.
073A348, 1 TURBO MILL,
BAUERMEISTER, type UT-62,
Dia. 1200x400 mm, 110 kW.
029H155, 1 CONTRAPLEX
WIDE CHAMBER MILL,
ALPINE, type 710 CWS, Dia.
710 mm, 2x 74 kW.
244K213, 1 LUMP BREAKER
WITH DISCHARGE SCREW,
AZO, stainless steel, rotor dia.
220x800 mm, 0,75 kW.
PLEASE
OFFER US YOUR
SURPLUS
EQUIPMENT
LUMP/ROLL/TEETH ROLL BREAKERS
217K079, 1 LUMP BREAKER,
GERICKE, type SB, stainless
steel, Dia. 200x300 mm, 1,5 kW.
016A149, 1 DOUBLE SHAFT
LUMP BREAKER, stainless
steel, Dia. 220x450 mm, 5,5 kW.
060G264, 1 LUMP BREAKER,
KARL SCHNELL, type 491,
stainless steel, 500x1000 mm,
7,5 kW + bin lifter.
085C501, 1 HAMMER
MILL, FITZPATRICK, type
VFS-DC-D6A-PCS, stainless steel, Dia. 270x140
mm, “Comminutor”.
042B324, 1 LUMP BREAKER,
KÖLLEMANN, type AJK-KBDN160-1510x290, stainless
steel, 2x 160x1522 mm.
A. Foeth b.v.
-
026W125, 1 DOUBLE ROLL
MILL, MERZ, type LWBP 2/2,
stainless steel, Dia. 200x200 mm,
2x1,5 kW.
Barneveld
The Netherlands
-
027E101, 1 COMMUNITING
MILL, APEX, type 114 DW-5F,
stainless steel, Dia. 260x293 mm,
22/30 kW.
217K045, 1 BREAKER,
GERICKE, type ZBS 30.30.S,
stainless steel, Dia. 280x300 mm,
9 kW.
Tel. 0031 (0)342415551
Fax 0031 (0)342417845
Partnr.
011F035
011F034
011F033
011F036
162F807
026W125
079B438
000I489
189M737
109K444
217K079
217K045
217K046
217K047
217K075
217K077
217K078
033C166
050N164
057C249
016A149
016A132
016A147
093W466
016A136
016A135
016A146
244K213
033C165
057F261
231D847
060G264
042B324
Make
KUEENLE HEMMING
KUEENLE HEMMING
KUEENLE HEMMING
KUEENLE HEMMING
Type
Width (mm)
KTE 160 M4
KTE 160 M4
KTE 160 M4
KTE 160 M4
KARL MERZ
KARL MERZ
LWBP 2/2
LWBP 2/2
SOLIDS SYSTEMS
GERICKE
GERICKE
GERICKE
GERICKE
GERICKE
GERICKE
GERICKE
VECOPLAN-HACKER
KBDT 330X320
SB
ZBS 30.30.S
ZBS 30.30.S
ZBS 30.30.S
ZBS 30.30.S
ZB
ZB
35/8/2 V
SCHEPENS
HANS KOCK, LÜBECK
AZO OSTERBURKEN
ALPINE
BAUERMEISTER
OTTEVANGER
KARL SCHNELL
KÖLLEMANN ADENAU
51/85 DBZ
ZWR-252
491 Breaker
KB-1510X290
200
200
250
270
300
300
300
300
300
300
300
300
350
390
400
440
440
440
445
450
450
450
800
800
900
900
1000
1510
Dia. (mm) Motor (kW)
180
11,0
180
11,0
180
11,0
180
11,0
2,0
200
2x 1,5
200
1,5+0,75
300
1,5
120
3,0
150
2,2
200
1,5
280
9,0
280
9,0
280
9,0
280
9,0
200
1,5
200
1,5
280
22,0
250
2x 2,2
300
7,5
220
5,5
220
5,0
220
5,5
600
160
160
160
220
3x 0,75
500
2x 11,0
250
11,0
300
2x 4,0
500
7,5
2x 160
7,5
E-mail:
[email protected]
Website: www.foeth.nl
JANUARI 2017
9
SIEVES
VIBRO SIEVES
237K183, 1 VIBRO SIEVE,
RUSSELL FINEX, type 17300
LD/ES, stainless steel, Dia.
510 mm.
263K272, 1 VIBRO SIEVE,
ALLGAIER, type VTS-600/2,
stainless steel, 2 Decks, Dia.
600 mm.
252K246, 1 TUMBLER SCREENING MACHINE, ALLGAIER,
type TSM 950/2, stainless steel,
2 Decks Dia. 950 mm.
207K156, 1 VIBRO SIEVE,
SWECO, type US-60S 888+C,
stainless steel, 2 Decks,
Dia. 1500 mm.
246K207, 1 VIBRO SIEVE,
GEA, type SRW, stainless steel,
1120x630 mm.
201K010, 1 VIBRO SIEVE,
RUSSEL FINEX, stainless steel,
Dia. 510 mm, 2 motors.
041F170, 1 VIBRO SIEVE,
SWECO, type S-30, stainless
steel, Dia. 762 mm.
266K279, 1 VIBRO SIEVE,
ALLGAIER, type VTS-1200/3,
stainless steel, 3 Decks,
Dia. 1200 mm.
022B125, 1 TUMBLER
SCREENING MACHINE,
ALLGAIER, type TSMH2600/4, mild steel, 4 decks,
Dia. 2600 mm.
246K206, 1 VIBRO SIEVE,
GEA, type SRW, stainless steel,
1480x800 mm.
052H206, 1 TUMBLER SCREENING MACHINE, ALLGAIER, type
ATS-600-2, stainless steel, 3 decks,
Dia. 600 mm.
217K042, 1 VIBRO SIEVE,
ALLGAIER, type D-950, stainless
steel, Dia. 950 mm, 2x 0,5 kW.
052G257, 1 TUMBLER SCREENING MACHINE, ALLGAIER, type
TSI-143, stainless steel, 3 Decks,
Dia. 1400 mm.
029H147, 1 TUMBLER
SCREENING MACHINE,
MINOX, type MTS-2600/5, mild
steel, 5 Decks, Dia. 2600 mm.
065U443, 1 VIBRO SIEVE,
SPALECK, type SELU
750+1700, stainless steel,
650x1800 mm, 1,4 kW.
Partnr.
036E140
025H064
060F320
036T196
089P405
080Y528
201K010
240K189
237K183
051A286
005U013
263K272
124W655
052H206
032U183
041F170
058S200
059G268
004B051
077B461
041H137
241K202
040D157
041H135
045A240
065S379
045A242
041S132
045A237
045A239
045A241
217K042
246K207
246K204
252K246
246K205
052P272
241K201
069Z277
116Y848
051U325
008Y097
051U324
051U326
065U443
169K556
266K279
079B432
034C093
246K206
005U012
011E032
052G257
248K225
248K226
052G256
052G255
207K155
018Z068
057B334
095F506
095F507
207K156
056B327
207K153
078F400
038E136
214K039
029H147
022B125
001M008
Make
MOGENSEN GMBH
TYLER U.S.A.
TYLER U.S.A./
JÖST
RUSSEL
RUSSELL
RUSSELL FINEX
RUSSELL LONDON
RUSSELL FINEX
MURRE TECHNIEK B.V.
GOUGH
ALLGAIER WERKE
GOUGH ENGINEERING
ALLGAIER WERKE
SUPERIOR B.V.
SWECO EUROPE SA
Type
Surface (M2)
Piccolo
0,1
RO-TAP RX-29-16
0,1
RO-TAP RX-29
0,1
SUE
0,1
16350
0,2
16350
0,2
Compact 17500
0,2
1557
0,2
17300/LD/ES
0,2
09004003
0,2
Vibrecon Separa
0,3
VTS-600/2
0,3
GV 2/1 FT
0,3
ATS-600/3
0,3
SZV 800/5/6
0,3
S-30 S
0,4
0,4
FB LEHMAN
VSC
0,4
JÖST MÜNSTER
SUE
0,4
SWECO EUROPE SA
LS-30 S 66
0,4
VIBRA OFFENBACH
ESR-10/2-4
0,5
GOUGH ENGINEERING GV-3/2
0,5
0,5
VIBRA OFFENBACH
VS-1 10-5-5/3
0,5
EMILOS CAVRIAGO
Vibroscreen 900
0,6
KARL MERZ
ULA 570/50/650
0,6
EMILOS CAVRIAGO
Vibroscreen 900
0,6
MERZ
570/50-650
0,6
CUCCOLINI
GRP-900
0,6
EMILOS CAVRIAGO
Vibroscreen 900
0,6
EMILOS CAVRIAGO
Vibroscreen 900
0,6
ALLGAIER WERKE
D-950
0,7
GEA SCAN-VIBRO
SRW
0,7
GEA SCAN-VIBRO
SRW
0,7
ALLGAIER WERKE
TSM-950/2
0,7
GEA SCAN-VIBRO
SRW
0,7
RUSSEL
15555
0,7
GOUGH ENGINEERING GV-2/2
0,8
JÖST
SUE
0,8
RHEWUM
RIUS 600X1600
0,9
WILLIAM BOULTON
48/2/ST/BT MKII
1,0
SWECO VIBRO ENERGY PH-46 Y
1,0
WILLIAM BOULTON
48/2/ST/BT MKII
1,0
WILLIAM BOULTON
48/2/ST/BT MKII
1,0
SPALECK BOCHOLT
SELU-750+1700
1,1
SHARPLESS
410Y
1,1
ALLGAIER WERKE
VTS-1200/3
1,1
MINOX SIEBTECHNIK
MTS-1200
1,1
SUPERIOR B.V.
ZM 1500/750/4
1,1
GEA SCAN-VIBRO
SRW
1,2
GOUGH & CO.
Vibrevon Separa
1,3
VIBRA
G-20/8-I-S-DV
1,3
ALLGAIER PROCES
TSI-143
1,5
JOEST DUELMEN
SUZ
1,6
JOEST DUELMEN
SUZ
1,6
CUCCOLINI ITALY
VLM-1500 1X
18
CUCCOLINI ITALY
VLM-1500 1X
1,8
SWECO EUROPE
US-60 S 888+C
1,8
SWECO
US-60S-158+C
1,8
SWECO EUROPE S/A
Avalanche 60”
1,8
CUCCOLINI ITALY
VLM-1500 1X
1,8
CUCCOLINI ITALY
VLM-1500 01X
1,8
SWECO EUROPE
US-60-S 888+C
1,8
SWECO EUROPE S.A.
US-60 S 158+C
1,8
SWECO EUROPE
US-60 S 888+C
1,8
VAV SCAN-VIBRO
SRS Special
1,9
THOMAS LOCKER S.A. Rotex 43
2,0
RHEWUM REMSCHEI
WA 5/135X225/V
3,0
MINOX SIEBTECHNIK
MTS-2600/5
5,3
ALLGAIER WERKE
TSMH-2600/4
5,3
6,0
Partnr.
036Z146
007T030
034G141
109T675
240K232
030H114
065E268
034G142
026F097
078E309
050C483
237K222
029M102
083N397
018E095
238H1088
086G402
105K327
031A167
237K182
061S422
228Z795
073F362
235K163
058H374
009H023
042F194
026H095
026H096
006H015
009H022
244K212
051B303
033H170
078Y540
053G204
013X040
104W506
078Y541
092Z348
122S523
037G122
034B199
072B398
263K270
076F424
076F425
004Y083
250K266
250K267
175P847
011F032
011F029
091W525
085F456
086A515
Make
POWTEC/DEMACO
ALEXANDERWERK
GLATT AG
ALEXANDERWERK
FREWITT
VOEGELE
FREWITT
QUADRO CANADA
FREWITT FRIBOUR
STEPHAN HAMELN
GLATT
GLATT
Partnr.
278K304
279D1068
230K106
278K303
228K113
041E316
046H182
046H181
012F080
012F079
078F403
220K064
220K063
016B074
016B075
004B191
Make
AZO GMBH
JEL
AZO GMBH
POWTEK-GERICKE
SPIROMATIC
Material
MS
SS
SS
SS
SS
SS
316L
SS
SS
SS
SS
316
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
ALU
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
316
SS
SS
SS
SS
SS
SS
SS
SS
MS
304
SS
SS
321
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
316
MS
SS
MS
MS
SS
Sizes (mm)
175x480
Dia. 195
Dia. 195
500x250
Dia. 500
Dia. 510
Dia. 510
Dia. 510
Dia. 510
375x420
Dia. 600
Dia. 600
Dia. 610
Dia. 600
580x480
Dia. 762
750
Dia. 764
390x1000
Dia. 762
350x1550
Dia. 800
1200x400
300x1800
Dia. 800
570x1100
Dia. 880
100x550
Dia. 880
Dia. 880
Dia. 880
Dia. 950
630x1120
630x1120
Dia. 950
630x1120
Dia. 950
Dia. 1150
1450x555
600x1500
Dia. 1150
Dia. 1150
Dia. 1150
Dia. 1150
650x1800
Dia. 1200
Dia. 1200
Dia. 1200
1500x750
800x1480
Dia. 1300
1800x173
Dia. 1400
2200x740
2200x740
Dia. 1500
Dia. 1500
Dia. 1524
Dia. 1524
Dia. 1524
Dia. 1500
Dia. 1500
Dia. 1524
Dia. 1524
Dia. 1524
3050x630
2100x950
1350x2250
Dia. 2600
Dia. 2600
1750x3500
038E136, 1 VIBRO SIEVE,
THOMAS LOCKER, type
Rotex 43, mild steel, 3 sieve
decks, 2100x950 mm.
214K039, 1 SCREENING
MACHINE WITH DIRECT EXCITATION, RHEWUM, stainless
steel, 1350x2250 mm.
263K270, 1 GRANULATING
SIEVE, MOUNTED ON LIFTING
COLUMN, FREWITT, type
MG636, stainless steel.
250K267, 1 GRANULATING
SIEVE, FREWITT, type MG 636,
stainless steel, Dia. 122x440 mm.
034G142, 1 QUADRO MILL, type
Comil 197, stainless steel, Dia.
120x80 mm.
A. Foeth b.v.
-
Barneveld
The Netherlands
-
026H090, 1 ROTATING SIEVE,
AZO, type E360 Pharma, stainless steel, Dia.100x400 mm,
0,75 kW.
230K106, 1 ROTATING SIEVE,
AZO, type E-400, stainless steel,
Dia. 200x400 mm.
SIEVE GRANULATORS
Type
FG-90X75
KM 7 1/4
GRS-80 S
AGM
MF-LAB
PDK 8-12
GLA-ORV
Comil 197
SG-129
KG-160 P
TR-120
GRS-120
Width (mm)
75
80
80
80
90
100
100
120
120
120
120
120
145
TK FIELDER
Betagrind
150
ERWEKA GMBH
AR-400/FGS
150
VIANI
FV 190
150
ERWEKA
FGS
150
ERWEKA
KU1
150
ERWEKA
FGS
150
FREWITT FRIBOUR
Coniwitt-150
155
WERNER&PFLEIDERER Express 175/120
160
WP
160
FREWITT FRIBOUR
MGI-314
200
QUADRO CANADA
Comil U-20
205
CMA S.A. QUIMPE
Calibreur 2
210
QUADRO CANADA
Comil 196
300
ALEXANDERWERK
R-300
300
ALEXANDERWERK
R-300 V
300
ALEXANDERWERK
R-300 V
300
LB BOHLE
PRS-300
300
KEK
Betagrind
300
ALEXANDERWERK
R-300
300
ALEXANDERWERKE
300
KEMUTEC GROUP
CM-340 UB
340
KEK KEMUTEC
340
MANESTY
Rotogran IV
340
KEK
Betagrind
340
KEK
340
KEK KEMUTEC
340
KEK KEMUTEC POWDER Betagrind 300
340
MPI
S1
350
MANESTY
Rotogran IV
350
FREWITT
MG-203
440
FREWITT
MG
440
FREWITT FRIBOUR
MG-636
440
FREWITT FRIBOUR
MG-204
440
FREWITT FRIBOUR
MG-624
440
FREWITT
MG
440
FREWITT
MGI-628
440
FREWITT
MGI-624
440
450
GERICKE
300x450 MK2
450
GERICKE
300x450 MK2
450
500
ALEXANDERWERK
RFG
750
800
Material
SS
ALU
SS
ALU
SS
SS
SS
SS
1.4404
SS
SS
SS
SS/ALU
SS
SS
SS
SS
SS
SS
SS
SS
AL/SS
SS
SS
1.4404
SS
SS
1.4571
1.4571
SS
SS
SS
ALU
1.4404
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS/MS
SS/MS
SS
SS
SS
Motor (KW)
1,1
0,92
Material
SS
SS
SS
SS
304
MS
SS
SS
SS
SS
SS
MS
MS
MS
MS
1.4301
Motor (KW)
0,75
2,2
1,5
2,2
2,2
3,0
0,75
0,75
0,75
0,75
2,2
5,5
5,5
5,5
5,5
6,5
0,75
0,37
7,4
0,37
1,5
2,2
1,4/1,8
1,35
2,2
2,0
7,5
CERAM FRANCE
CERAM FRANCE
CERAM FRANCE
CERAM FRANCE
GERICKE
GERICKE
POWTEK LTD
POWTEK LTD
BKG
Type
E-360 B1
Length (mm)
360
400
E-450 C1
450
CSM-722 Sifter
500
Spirosift 6000
650
750
TS-3
750
TS-3
750
TS-4
750
TS-4
750
800
CSM-15x42 MK2
920
CSM-15x42 MK2
920
15X42 Sifter
930
15X42 Sifter
930
TEW A-2000
1050
7,5
3,6
3,7
7,5
7,5
1,1
7,5
7,5
Tel. 0031 (0)342415551
Fax 0031 (0)342417845
228K113, 1 ROTATING SIEVE,
SPIROMATIC, type Spirosift
SS 6000 CL, stainless steel,
Dia. 245x650 mm, 2,2 kW.
± 2,2
0,75
1,1
1,1
1,1
1,1
0,75
4,0
4,0
9,0
0,75
0,75
YOU CAN FIND OUR COMPLETE LIST ON OUR WEBSITE
WWW.FOETH.COM
033H170, 1 CONICAL GRANULATING SIEVE, KEMUTEC,
type CM-340 UB, stainless steel,
Dia. 340x170 mm, 7,5 kW.
026H097, 1 ROTATING SIEVE,
KEK, type SO Sifter, double sieve,
Dia. 180x600 mm, 2x 2,5 kW.
Motor
0,5
0,4
0,5
4,0
1,5
1,35
3,0
3,6
5,5
7,5
4,0
3,6
3,6
ROTATING SIEVES
248K226, 1 VIBRO SIEVE,
JOEST, type SUZ, stainless
steel, 2 Decks, 2200x740 mm.
278K304, 1 ROTATING SIEVE,
AZO, type E360, stainless steel,
Dia. 100x360 mm, 0,75 kW.
058H374, 1 CONICAL
GRANULATING SIEVE, CMA,
type Taille 2, stainless steel,
Dia. 210x125 mm, 5,5 kW.
078F403, 1 ROTATING SIEVE,
stainless steel, Dia. 300x800 mm.
220K064, 1 ROTATING SIEVE,
GERICKE, type CSM 15x42 MK2,
mild steel, Dia. 380x920 mm,
5,5 kW.
244K212, 1 GRATER/SHREDDER, ALEXANDERWERK,
type R-300, stainless steel,
Dia. 300x150 mm.
E-mail:
[email protected]
Website: www.foeth.nl
JANUARI 2017
10
DISSOLVERS
Partnr.
041H139
061H257
058H304
014H034
125P535
041W205
041W203
104X548
018X282
018X281
098Y766
041W204
104X547
097Y712
229K103
020H051
002H003
008X018
141S644
039Z159
079Z306
101B581
070E255
070E254
082Z323
039Z160
146M522
091B561
079N315
044M160
074A364
090W549
036G117
036G116
146M525
090U654
090U655
126H658
Make
WMA GETZMANN
VMW GEZMANN
VMI RAYNERI
NIEMANN
NETZSCH
VOLLRATH
VOLLRATH
JOHANN KREUZIGER
VOLLRATH
JOHANN KREUZIGER
DRAIS
VOLLRATH
VOLLRATH
WILHELM NIEMANN
DOBY FRANCE
GRIESER GMBH
MOLTENI MILANO
MOLTENI
HUBBES
GRIESER
MTI MISCHTECHNIK
MASTERMIX
COATEMA GMBH
COATEMA GMBH
HUBBES
GRIESER
DRAIS
NIEMANN
DRAIS
NIEMANN
NIEMANN
GRIESER
WILHELM NIEMANN
WILHELM NIEMANN
MITRAS KUNSTSTOFFE
VOLLRATH
VOLLRATH
VIBRO-MAC
Partnr.
005S016
138M486
111N543
127X744
016G049
068X395
114X588
Make
VIBRO-MAC
VIBRO-MAC
MOLTENI
VIBRO-MAC
MOLTENI MILANO
VIBRO-MAC
MOLTENI
DISSOLVERS / BUTTERFLY MIXERS
Type
Capacity (Ltr.)
Dispermat VLE
Dispermat AE-1
Dynablock CB-25
KDV-790
606 (75)
VDSV-20
VDSV-30
DSH/250
VDSV-50
DSH 30079 ZV
RN 2/30 VAC
VDSVY-50E
VDD-40
201
Handymix
1,0
GFVDA 30L
5,0
TM 5-SV
5,0
Mescolatore
40,0
50,0
VPLD-60 S
62,0
P-Z9-100/A.D
100,0
250,0
400,0
400,0
HBR-Z-2 DR
500,0
VPLD-600
600,0
RSV 14
700,0
KDC 491-61 FU
850,0
ZH1000
1000,0
KDV 1000 S
1000,0
KDV-1000 95
1000,0
M3-1100
1200,0
VKDV-411
1500,0
VKDV-411
1500,0
2000,0
VDDY-60
4000,0
VDDY-60
4000,0
HS15/H
10.000,0
Material
SS
SS
SS
MS
MS
MS
SS
SS
SS
SS
SS
SS
SS
SS
304
304
SS
1.4541
MS
SS
304
SS
SS/MS
SS/MS
1.4541
1.4541
SS
Motor (KW)
1,1
1,5
0,75
58,0
55,0
15,0
24,0
50,0
36,0
58,0
30,0
36,0
30,0
11,0/18,0
0,55
3,0
0,8/0,95
1,5
5,0
5,5+11,0
6,8+2,2
8,0/4,0
18,5
18,5
75,0/6,8
90,0+30,0
10,0
45,0
45,0
70,0
70,0
80,0+17,5
30,0
30,0
75,0
44,0
55,0
Hydr.
020H051, 1 LAB. DISSOLVER,
GRIESSER, type GFVDA 30L,
stainless steel, 3 kW., vacuum.
BUTTERFLY-MIXERS
Type
Capacity (Ltr.)
Hydro Mix
Hydeo Mix
H.450
5,0
H-5 S.V.
5,0
30,0
PH/H-2000 SV
2000,0
Material
MS/SS
MS
SS
SS
SS
304
Motor (KW)
18,5
18,5
24,0
Hydr.Driv
0,75
5,5
Hydr.Driv
229K103, 1 DISSOLVER,
FACHES, stainless steel, 1 ltr.,
Jckt., 0,37 kW.
061H257, 1 DISSOLVER, VMA
GETZMANN, type AE-1, stainless steel, 1,5 kW.
041H139, 1 DISSOLVER, VMA
GETZMANN, type VLE-750C,
stainless steel, 0,18 kW.
070E254, 1 DISSOLVER,
COATEMA, stainless
steel, 400 ltr., Jckt., 18,5
kW, vacuum.
039Z159, 1 VACUUM
PLANETARY DISSOLVER, 62 ltr., 5,5 + 11 kW,
make Grieser, type
VPLD-60.
039C145, 1 IMMERSION
MILL, NETZSCH, type
TM50, stainless steel,
37 kW.
011Y102, 1 IMMERSION
MILL MIRODUR, type
Turbomill 50 HP, stainless
steel, 37 kW.
065H291, 1 IMMERSION
MILL, VIBRO MAC, type
submill SM-30, vacuum,
stainless steel, 22 kW.
091B561, 1 PHARMA DISSOLVER, NIEMANN, type
KDV-491-61 FU, stainless
steel, 850 ltr., 45 kW.
039Z160, 1 VACUUM
PLANETARY DISSOLVER, GRIESER, type VLD600, stainless steel, 640
ltr., Jckt., 90 kW + 30 kW.
014H034, 1 DISSOLVER,
NIEMANN, type KDV-790,
shaft length 1050 mm,
58 kW.
074A364, 1 DISSOLVER,
NIEMANN, type KDV1000, vacuum, 70 kW.,
1000 ltr.
036G116, 1 DISSOLVER,
NIEMANN, type
VKDV411, vacuum,
1500 ltr., 30 kW.
PLEASE
OFFER US YOUR
SURPLUS MACHINERY
THREE ROLL MILLS
232K151, 1 THREE ROLL
MILL, OLIVER BATTLE, Dia.
120x180 mm, 2 kW.
090U654 and 090U655 2 DISSOLVERS, VOLLRATH, type
VDDY-60, stainless steel, 44 kW, 5100 ltr., Jckt.
276K288, 1 THREE ROLL MILL,
BÜHLER, type SDY-200, Dia.
150x200 mm, 2,2 kW.
Make
OLIVER Y BATTLE
BÜHLER
BÜHLER
BÜHLER
BÜHLER
BÜHLER
BÜHLER
BÜHLER
BÜHLER
LEHMANN
LEHMANN
LEHMANN
LEHMANN
Type
Tricilindrica
SDY-200
SDY-200
SDY-200
SDY-200
SDY-200
SDT-800
SDW-800
SDV-900
WD 13
WD 13E
WD-13
WD-13
Partnr.
120X674
065H292
039C145
120X675
177I547
065H297
070C324
041H138
016G043
274K293
118X749
038C078
016G046
016G047
002C003
028A127
078H350
078G375
078G376
070C323
122N606
056Z222
080G386
089N525
089I297
027A181
028R088
043R230
016G067
016G068
082W412
168P754
022Y162
038S118
268K299
011Y102
035B225
049E172
065H291
035E113
060U432
092A455
092A453
005S011
065H295
229K104
010Y160
005F011
005F010
005F009
013T741
010Y156
065H294
065H293
065H290
065H289
065H287
065H288
135N667
Make
VMA-GETZMANN
PROFARB
NETZSCH GMBH SELB
VMA-GETZMANN
WELTE
VIBRO-MAC
FRYMA AG
FRYMA AG
FRYMA AG
FRYMA GMBH
WAB
WAB
SUSSMEYER
SUSSMEYER
FRYMA AG
FRYMA AG
DRAISWERKE
DRAIS
DRAIS
FRYMA AG
NETZSCH
FRYMA AG
FRYMA AG
NETZSCH
NETSCH
NETZSCH
UNION PROCESS
DRAIS
FRYMA AG
FRYMA AG
WIENER
HOSOKAWA MICRON
COMEC SASSUOLO
DRAIS
ROMACO AG
MIRODUR SPA
NETZSCH
NETZSCH GMBH
VIBRO-MAC
DRAIS MANNHEIM
COMEC
DRAIS
DRAIS
NETZSCH
PROFARB
WAB BACHOFEN
NETZSCH
WAB
WAB
WAB
WIENER
NETZSCH
PROFARB
PROFARB
PROFARB
PROFARB
NETZSCH
NETZSCH
SUSSMEYER
Width (mm)
180
200
200
200
200
200
800
800
900
1300
1300
1300
1300
Dia. (mm) Motor (KW)
120
2,2
150
2,2
150
2,2
150
2,2
150
150
2,2
400
34,0
300
400
400
55,0
400
55,0
400
55,0
400
55,0
SAND MILLS
Type
Capacity (Ltr.)
Dispermat
PSB-20/EX
TM-50
Dispermat
RS 4
0,2
SM-Pilot
0,4
MSM-12
0,5
MSM-12
0,5
MSZ-12
0,5
MSZ-12
0,5
KDL-special
0,6
KDL-special
0,6
1,0
1,0
MS-18
1,1
MS-18
1,1
PM-1
1,2
PML H+V
1,2
PML H+V
1,2
MSM-32
2,4
LMJ 2 (506.02)
2,5
MSZ-32
3,0
MSZ-32
3,4
LME 4 (574.04)
4,0
05
5,0
KE-5 Molinex
5,0
B/SIZE 1-S
5,0
PM 5 TEX-H
6,0
MSZ-50
6,0
MSZ-50
6,0
W1S
6,5
AQ 5
7,9
Micronet M8
8,0
RS20
8,0
MS-50 Coball
9,8
Turbomill 50HP
10,0
LME-20
21,2
LME-20
21,2
SM-30 I/R/EX
21,5
PMC-25 TEX
25,0
Micronet 25
25,0
PMV-25 RL
26,0
PMV-25 RL
26,0
LMJ 35
35,0
PS-50/EX
44,0
KD-45 C
45,0
RM-50 GK
55,0
KD-60 C
60,0
KD-60 C
60,0
KD-60 C
60,0
W.15.S
100,0
RM-100 GK
100,0
PS-100/EX
113,0
PS-100/EX
113,0
PS-100/EX
113,0
PS-100/EX
113,0
LME-100 K
115,0
LME-100 K
115,0
HM 150 E.H.P.
150,0
A. Foeth b.v.
-
141S635, 1 THREE ROLL MILL,
LEHMANN, type WD 13, Dia.
400x1300 mm, 55 kW.
SAND MILLS
THREE ROLL MILLS
Partnr.
232K151
042G170
276K288
061H258
271K298
276K302
163P738
034G140
034G139
141S634
085S334
141S632
141S635
034G140, 1 THREE ROLL
MILL, BÜHLER, type SDW-800,
Dia. 300x800 mm.
Material
SS/Glass
SS
SS
SS/Glass
SS
304
MS
MS
MS
MS
SS
SS
1.4034
1.4034
SS
Ceramic
Ceramic
MS
SS
MS
MS
SS
SS
MS
Coating
SS
MS
MS
SS
SS
SS
Coated
SS
SS
MS
1.4571
304
1.4571
SS
MS
MS
MS
MS
MS
MS
MS
Rubber li
MS
MS
MS
MS
MS
MS
Motor (KW)
2,2
22,0
37,0
2,2
1,1
0,75
3,0
3,0
3,0
2,2
1,85
1,85
0,55
0,55
11,0+0,37
7,5+1,1
0,75
4,0
4,0
22,0
4,0
18,5
24,0
4,0
2,0
5,5
1,5
6,8
45,0
45,0
0,75
0,37
4,0
55,0
37,0
18,5
18,5
22,0
30,0
4,0
24,0
24,0
36,0
45,0
44,0
75,0
44,0
44,0
44,0
5,5
90,0
55,0
55,0
55,0
55,0
58,0
58,0
84,0
078G375, 1 SAND MILL (HOR./
VERT.), DRAIS, type PML H+V,
ceramic, 1,2 ltr., Jckt., 4 kW.
049E172, 1 HORIZONTAL
SAND MILL, NETZSCH, type
LME-20, stainless steel, 21,1 ltr.,
Jckt., 18,5 kW.
035E113, 1 HORIZONTAL
SAND MILL, DRAIS, type PMC25 TEX, stainless steel, 33,7 ltr.,
30 kW.
229K104, 1 HORIZONTAL
SAND MILL, WAB, type
KD-45-C, 45 ltr., Jckt., 44 kW.
065H295, 1 HORIZONTAL
SAND MILL, PROFARB, type
PS-50/EX, 44 ltr., Jckt., 45 kW.
005F011, 1 DYNO MILL, WAB,
type KD-60, 60 ltr., Jckt.,
44 kW.
065H287, 1 HORIZONTAL
SAND MILL, NETZSCH, type
LME-100K, 115 ltr., Jckt., 58 kW.
065H293, 1 HORIZONTAL
SAND MILL, PROFARB, type
PS 100/EX, 113 ltr., Jckt., 55 kW.
041H138, 1 COBALL
MILL, FRYMA, type
MSM-12, Jckt., 3 kW.
Barneveld
The Netherlands
-
070C324, 1 COBALL
MILL, FRYMA, type
MSM-12, Jckt., 3 kW.
028A127, 1 COBALL
MILL, FRYMA, MS-18,
Jckt., 7,5 kW.
Tel. 0031 (0)342415551
Fax 0031 (0)342417845
016G068, 1 COBALL
MILL, FRYMA, type MSZ50, 45 kW.
266K299, 1 COBALL
MILL, FRYMA, type
MS-50, 55 kW.
E-mail:
[email protected]
Website: www.foeth.nl
JANUARI 2017
11
SCREW PRESSES
PELLETISERS/ROLL COMPACTORS
042B299 KÖLLEMANN COMPACTING AND DE-WATERING
SCREW, stainless steel, motor 15 kW, built in 2006.
203K002 BEPEX ROLL COMPACTOR, type MS-75-520/160, roll dia.
520x200 mm, carbon steel, – RECONDITIONED –
067F315 VETTER/ANHYDRO KASSEL DE-WATERING PRESS,
type Vetter CV, screw dia. 250-150 mm, screw length 1500 mm, stainless steel. – RECONDITIONED –
101Y726 HAENDLE SCREW PRESS, type EDR 21-A, stainless
steel, twin screw, screw dia. 210 mm, jacket, built in 2000, motor
22 kW.
217K044 ALEXANDERWERK ROLL COMPACTOR, type
WP-330x200 V, roll dia. 330x200 mm, with 2 granulators,
– RECONDITIONED –.
068E252 FREUND ROLL
COMPACTOR, type TF-mini
roller compactor, roll dia.
100x25 mm.
065E267 ALEXANDERWERK
ROLL COMPACTOR, type
WP-50, roll dia. 150x50 mm.
106X694 HUTT ROLL COMPACTOR, type L200/50, roll dia.
200x50 mm.
067E260 ALEXANDERWERK
ROLL COMPACTOR, type
WP-150x120 V, roll dia.
150x120 mm.
031A171, ALEXANDERWERK
MOIST GRANULATOR WITH
GRANULATING SIEVE, type
GA65/RSA, with 7 dies.
168N773, ALEXANDERWERK
MOIST GRANULATOR, type
G1/168. – RECONDITIONED –
050G197 HEESEN
GRANULATOR, type Monoroll,
roll dia. 130 mm.
085G407 ALEXANDERWERK
ROLL COMPACTOR, type
WP-150, roll dia. 150x120 mm.
– RECONDITIONED –
SCRAPED SURFACE HEAT EXCHANGERS
034G143 ALFA
LAVAL SCRAPED
SURFACE HEAT
EXCHANGER
(2 pieces), type
Contherm 6x3, heating surface 0,279 m2
each.
067H309 ALFA LAVAL SCRAPED SURFACE HEAT EXCHANGER
(3 pieces), type Contherm 6x9, heating surface 0,836 m2 each.
222K086 ALFA LAVAL SCRAPED SURFACE HEAT EXCHANGER,
type Contherm 6x3, heating surface 0,279 m2.
SPHERONIZERS
061G280 NARA MACHINERY HYBRIDIZATION SYSTEM, type
NHS-3, stainless steel, with filter, Jacketed.
A. Foeth b.v.
-
101Y722 GLATT SPHERONIZER, type P-140, disc dia. 1400 mm,
stainless steel (1.4571), built in 2000.
Barneveld
The Netherlands
-
Tel. 0031 (0)342415551
Fax 0031 (0)342417845
090Y679 GLATT SPHERONIZER, type P-180, disc dia. 1800 mm,
stainless steel (316L), built 2001, with switchgear.
E-mail:
[email protected]
Website: www.foeth.nl
JANUARI 2017
12
NUTSCHE FILTERS
Partnr.
098F493
237K245
029G100
074S263
078H347
237K244
069C510
011B205
091F466
053T220
071E284
044U254
058F283
229K159
123X732
007C015
133X767
050C542
060C277
015A081
047U528
007X508
047U529
085X493
026F096
081R360
079H363
048H204
001B018
074S262
008Y104
070H311
078Z367
024Z175
100P664
054E247
028Y276
226K090
013X084
075B450
082C469
Make
ROSENMUND VTA
OLSA SPA ITALY
SEITZ WERKE
SEITZ WEGA
ROSENMUND AG
E.F.C.I. FRANCE
SCHENK GMBH
SEITZ ENZINGER
GUEDU
FILTROBA TECHNIK AG
KÜHNI AG
FILTROBA
SEITZ ENZINGER
SEITZ WERKE
W. STÖCKLIN
SEITZ-WERKE
SEITZ WERKE
APACO A.G.
SEITZ
SEITZ WERKE
SEITZ
SEITZ WERKE
SEITZ
SEITZ ENZINGER
SCHENK/EKATO
SEITZ ENZINGER
GUEDU
SEITZ ENZINGER
DIDIER FILTERTECHNIK
SEITZ
ROSENMUND AG
RITTER
GIOVANOLA S.A.
ROSENMUND AG
DIDIER FILTERTECHNIK
SEITZ ENZINGER
SEITZ ENZINGER
3V COGEIM SPA
ROSENMUND
COMBER SPA
A. MEILI S.A. BEX
Type
Surface (M2)
RSD 0,1
0,1
Dryfilter 70
0,1
EF30/30 CW
0,1
EFT 30.52
0,1
RSD 0,2-759-93
0,2
Filtre monoplaq
0,2
PEF-450/120
0,2
TERRA EFT-45
0,2
FILTRE PILOT`
0,2
Schraubenfilter
0,3
0,3
Schraubenfilter
0,3
EFA 60/125
0,3
TerraEF 60/125
0,3
0,3
EFT 60/180 CW
0,3
EF 60/120 CW
0,3
FILTER 600
0,3
EF60/120 CW
0,3
EF60/120 CW
0,3
EF60/120C
0,3
EF60/120CW
0,3
EF60/120C
0,3
EFA 80/320 CWIF
0,5
ESF 800/300 RZ
0,5
EF 80/350
0,5
ML-500
0,5
EF 80/320 CWF
0,5
3.57-80-300/HZ
0,5
EFR 100.500
0,6
RND 0,6-262-81
0,6
0,6
0,8
RND 1-131-74
1,0
DN 1200
1,1
EFT-125 PHARMA
1,1
EFR 125/1500 CW
1,1
FPP 200-FM-XD
1,8
RND 4-118-72
4,0
PF-5000
4,5
6,0
Material
Hastelloy
316L
1.4401
SS
1.4435
Hastelloy
1.4401
1.4571
Hastelloy
SS
1.4435
1.4435
1.4571
1.4571
SS
1.4571
1.4571
1.4435
1.4401
1.4401
1.4401
1.4401
1.4401
1.4571
1.4571
1.4571
316TI
1.4571
1.4571
1.4571
1.4435
1.4571
1.4435
Hastelloy
1.4571
1.4404
1.4539
Hastelloy
1.4435
1.4539
1.4541
Motor (KW)
4,0
Manual
0,6/0,75
5,7
2,2
0,7
2,2
3,0
3,0
3,0/5,2
5,5
4,0
4,0
13,2
Hydr.driv.
3,0
Hydraulic
2,5
091F466 GUEDU NUTSCHE
FILTER, type Filtre Pilot, filter
surface 0,17 m2, contact parts in
Hastelloy execution.
237K245 OLSA NUTSCHE
FILTER/DRYER, type Dryfilter
70, filter surface 0,07 m2, stainless steel (316L).
18,5
3,6/5,3
30,0
2x 6,8
Hydr.driv.
24,0
226K090 3V COGEIM NUTSCHE FILTER/DRYER, type Filtrodry
FPP 200-FM-XD, filter surface 1,75 m2, in Hastelloy Execution.
237K244 EFCI EQUIPMENT FOR CHEMICAL INDUSTRIES
NUTSCHE FILTER/DRYER, type Filtre Monoplaque sécheur, filter
surface 0,22 m2, contact parts in Hastelloy C-22 Execution.
VACUUM BELT FILTERS
078H347 ROSENMUND AG NUTSCHE FILTER/DRYER, RSD 0,2,
filter surface 0,2 m2, side discharge, hydraulic drive, stainless steel
(1.4435).
033H160 PANNEVIS VACUUM BELT FILTER IN GASTIGHT
HOUSING, filter surface 1,0 m2, in Hastelloy Execution,
type RT 0,25x4,0 M.
029G110 3V COGEIM NUTSCHE FILTER/DRYER, type FPP-030,
filter surface 0,3 m2, stainless steel (316), vessel capacity 310 ltr.,
hydraulic driven.
068G306 BHS SONTHOFEN VACUUM BELT FILTER, type BF 100065, filter surface 6,5 m2, contact parts in polypropylene, complete
line with vacuum pump and controls. – FILTER HAS NEVER BEEN
USED –
069C510 SCHENK NUTSCHE
FILTER/DRYER, type
DEF450/120, filter surface
0,15 m2.
075B450 COMBER NUTSCHE FILTER, type PF-5000, filter surface
4,5 m2, stainless steel (1.4539=904L high alloy austenitic), vessel
capacity 7200 ltr.. – RECONDITIONED –
011B205 SEITZ ENZINGER
NOLL NUTSCHE FILTER/
DRYER, type Terra EFR-45,
stainless steel (1.4571), filter surface 0,16 m2
FILTER PRESSES
Partnr.
217K043
188P134
058W240
023C102
050C545
023C097
169P802
068G300
068G301
118K372
068G299
169P803
Make
Type
Surface (M2)
BHS SONTHOFEN GMBH Autopress 300
0,5
LAROX
PF 2,5 A1
2,5
FILTRI DIEMME
F-500 KE
2,6
SCHENK
4,0
BHS SONTHOFEN GMBH Autopress 500
4,7
BECO FILTERTECHNIK Integra-4000
6,7
HOLSTEIN+KAPPERT.
Getra 1000
62,0
FILOX FILTERTECHNIK KF100.050-060
78,1
FILOX FILTERTECHNIK KF100.050-060
78,1
RITTERSHAUS
Aehis 800
100,0
FILOX FILTERTECHNIK KF100.070-074
117,3
HOLSTEIN+KAPPERT
Getra 1000
133,0
Material Pressure (Bar)
1.4571
SS
12
PP
15
SS
1.4404
1.4435
6
SS
Polypropy
16
Polypropy
16
PP
15
Polypropy
16
SS
050C545 BHS SONTHOFEN, type autopress AP-500, filter surface
4,7 m2, stainless steel (1.4404), from 2005.
A. Foeth b.v.
-
023C097 BECO FILTERTECHNIK FILTER PRESS, type
Integra-4000, filter surface 6,7 m2, stainless steel (1.4435), cake
capacity 47,5 ltr., jacketed plates & frames.
023C102, SCHENK PLATE AND FRAME FILTER PRESS, stainless steel, filter surface 4,0 m2, cake capacity 70 ltr., plate size
400x400 mm.
068G301 FILOX CHAMBER FILTER PRESS, type KF 100.050,
polypropylene plates, filter surface 78,1 m2. – FILTER HAS NEVER
BEEN USED –
068G299, FILOX CHAMBER FILTER PRESS, type KF 100.070,
polypropylene plates, filter surface 117,3 m2, with Abel pump.
– FILTER HAS NEVER BEEN USED –
Barneveld
The Netherlands
-
Tel. 0031 (0)342415551
Fax 0031 (0)342417845
E-mail:
[email protected]
Website: www.foeth.nl
JANUARI 2017
13
ROTATING VACUUM FILTERS
Partnr.
015E073
014X083
081B448
030F133
052F265
024C144
024C157
Make
SEITZ WERKE
SCHENK FILTERBAU
SEITZ ENZINGER
DELLA TOFFOLA
SEITZ ENZINGER
PADOVAN TMCI
PADOVAN TMCI
Type
Surface (M2)
Vacubloc
6,0
VDF-6M2 HW
6,0
Vacubloc
8,0
Filtro EC-10
9,0
Vacubloc 12 M2
12,0
Taylo 50
50,0
Taylo 50
50,0
015E073 SEITZ WERKE ROTATING VACUUM FILTER, type
Vacubloc Drehfilter, filter surface
6 m2, stainless steel (304).
PEELING CENTRIFUGES
Material
304
304
304
316
SS
304
304
Motor (KW)
0,18
0,55
0,75
0,75
0,75
3,0
3,0
Partnr.
078H359
071G332
001B020
026F086
001A023
085X518
048H205
071E300
225K092
033H187
226K091
031X141
Make
KRAUSS MAFFEI
HEINE GMBH
KRAUSS MAFFEI
KRAUSS MAFFEI
KRAUSS MAFFEI
KRAUSS MAFFEI
HEINE ZENTRIFUG
KRAUSS MAFFEI
GFT VIERSEN
ELLERWERK
FERRUM AG
HEINE ZENTRIFUGEN
Type
Dia. (mm)
HZ-40 SI
400
405
500
HZ-63 SI
630
HZ-630 PH
630
HZ-63
630
HZ-630-PH
630
408
800
HZ-80/1 SI
800
H-10
1000
938-H
1300
HSZ-PH R1400
1400
416
1600
BASKET CENTRIFUGES
Material
1.4581
1.4571
1.4571
Hastelloy
1.4571
Hastelloy
1.4539
1.4571
Hastelloy
1.34571
1.4404
1.4571
Motor (KW)
11,0
11,0
Hydr. dr.
22,0
Hydraulic
18,5
30,0
37,0
30,0
45,0
55,0
75,0
Partnr.
013X039
071F406
071H366
069C511
042F190
041G195
110S495
026F093
098F494
088F461
085X542
085X520
012R039
071F407
043R201
004Y027
037E123
013U050
071E291
008H016
071U491
071E298
085X519
040G124
106T689
071E299
008H017
050C334
117W596
Make
HEINKEL
FIMA PROCESS
HEINKEL AG
GFT TRENNTECHNIK
ELLERWERK
ELLERWERK
ELLERWERK
ELLERWERK
ELLERWERK
CEPA CARL PADBE
HEINKEL
HEINKEL
ALA
ELLERWERK
ELLERWERK
ELLERWERK
ROUSSELET
FERRUM AG
FERRUM AG
FERRUM AG
FERRUM AG
FERRUM AG
ELLERWERK
ELLERWERK
FERRUM AG
FERRUM AG
FERRUM AG
FERRUM AG
KRAUSS MAFFEI
Type
Dia. (mm)
HF-300
300
TZT-400X300
400
HF-450.1
450
V-50 U
500
931 L-II
500
931 L-II
500
931 L II
500
931-L
500
931-L
500
TZ-5
500
HF-600
600
HF-600
600
CPT-630
630
733 C-R
630
WFZ 630
630
733 C
630
Rapide SC 70,3
700
DSZ-OR 800
800
DSZ-O 800
800
POT-1000
1000
POT-1000
1000
DSZ-O 1000
1000
735-C
1000
735-CR
100
POR-1000
1000
pu 1200/600
1200
POR-1200
1200
PUR-1200/600
1200
VZO-125/2,5
1250
Material
Motor (KW)
1.4571
Hydr.
Hastelloy
7,5
1.4539
22,0
Hastelloy
5,5
SS/Coated
5,5
316
5,5
SS
5,5
SS
4,0
1.4539
5,5
SS
4,0
1.4571
22,0
1.4571
22,0
SS
4,0
Hastelloy
5,5
Hastelloy
22,0
SS
Hydr.
SS
3,0/4,0
SS/Halar
5,5
1.4435
5,5
1.4435
No motor
1.4435
6,8
SS/Halar
7,5
1.4571
15,0
Hastelloy
Hydr. driv.
1.4435
6,8
SS/Halar
22,0
1.4435
10,0
1.4435
22,0
1.4571
17,0/30,0
081B448 SEITZ ROTATING VACUUM FILTER, type Vacubloc, filter
surface 8 m2, stainless steel (304).
225K092 GFT TRENNTECHNIK HORIZONTAL PEELER CENTRIFUGE, type Schälzentrifuge H-10, basket dia. 1000x630 mm,
in Hastelloy (2.4602) execution.
030F133 DELLA TOFFOLA
ROTATING VACUUM FILTER,
type EC-10, filter surface 9,0 m2,
stainless steel 316.
071F406 FIMA PROCESS GMBH BASKET CENTRIFUGE/DRYER,
type TZT-400x300, basket dia. 400 mm, contact parts in Hastelloy
(2.4602) execution.
052F265 SEITZ ENZINGER
NOLL ROTATING VACUUM FILTER, type Vacublock Drehfilter,
filter surface 12 m2.
226K091 FERRUM AG HORIZONTAL SCRAPING CENTRIFUGE,
type HSZ-PH-R1400, basket dia. 1400x700 mm, stainless steel
(1.4401).
098F494 ELLERWERK BASKET CENTRIFUGE, type 913L
Universal Zentrifuge, basket dia.
500 mm, contact parts in 1.4539.
024C144 PADOVAN TMCI ROTATING VACUUM FILTER, type Taylo
50, filter surface 50 m2, stainless steel (304), 2 pieces available.
COLLOID MILLS
069C511 GFT BASKET CENTRIFUGE, type V-504, basket
dia. 500 mm, HASTELLOY
EXECUTION.
DECANTERS
032C141 FERRUM PUSHER CENTRIFUGE, type P-500/2 system
Escher Wyss, basket dia. 410/500 mm, motor 15+22 kW.
Partnr.
075B490
040U250
209K030
078B464
250K255
071G333
017X191
089B545
209K018
Make
GEA WESTFALIA
BIRD KHD HUMBOLDT
FLOTTWEG GMBH
KHD HUMBOLDT
KHD HUMBOLDT
WESTFALIA
WESTFALIA
WESTFALIA
WESTFALIA AG
Type Capacity (Ltr./Hr.)
SCA 220-02-33
SC-3044
Z 18-3/401
S 2-11
S 2-11
CA 226-110
10.000
CA 365-010
25.000
CA-365-03-00
25.000
CA 3675-01-02
25.000
Material
SS
1.4462
1.4463
1.4408
1.4408
SS
SS
SS
Motor (KW)
4,0+15,0
18,5+55,0
7,5+4,5
20,0
15,0+4,0
11,0+5,5
30,0
26,0
30,0
PISTON HOMOGENISERS
078F404 FRYMA VACUUM
EMULSIFYING SYSTEM
“DELMIX”, type MZM-VK 7
081F398 FRYMA VACUUM
EMULSIFYING SYSTEM
“DELMIX”, MZM-VK 25.
202K001 APV RANNIE PISTON HOMOGENIZER, type
LAB 12.51, max. 200 ltr., max.
1000 bar.
069F393 FRYMA COLLOID
MILL, type MZ-190/A, stainless
steel, rotor Dia. 190 mm.
SEPARATORS
221K081 KORUMA COLLOID MILL, type T-3, carborundum rotor, Dia. 180 mm,
RECONDITIONED.
035F144 KORUMA VACUUM DISPERSING & HOMOGENISING
UNIT, type Disho V100/45, vessel capacity 45 ltr.
A. Foeth b.v.
-
250K260 ALFA LAVAL PISTON
HOMOGENIZER, type SHL-05,
max. 400 ltr./Hr., max. 200 bar.
047E178 GEA WESTFALIA
SELF CLEANING DISC SEPARATOR, type OSC-4-91-006.
Barneveld
The Netherlands
-
088F464 WESTFALIA SEPARATOR, type CSA 19-06-476.
Tel. 0031 (0)342415551
Fax 0031 (0)342417845
017G333 WESTFALIA
DECANTER, type CA-226-110,
gastight, motor 11 + 5,5 kW.,
capacity 10.000 ltr./Hr.
209K030 FLOTTWEG
DECANTER, type Z 18-3/401,
motor 7,5+4,0 kW, stainless steel
(1.4463).
209K018 WESTFALIA AG OELDE, CLARIFYING DECANTER, type
CA 365-01-02, 2 phase, motor 30,0 kW, with seepex pump.
E-mail:
[email protected]
Website: www.foeth.nl
JANUARI 2017
14
FLUIDBED DRYERS BATCH
Partnr.
015C036
001A026
036F160
037G121
095B568
005B167
095X524
074H313
263K280
025H058
013B034
038X263
098Z383
071Z285
055A268
050F242
065M185
021B076
072X409
039B234
049Z226
026A303
090Y683
001A026 NIRO AEROMATIC
COATER/GRANULATOR, type
Combi coata 1, pan capacity
2,5 ltr., with electric heating, pan
material glass.
Make
AEROMATIC AG
NIRO AEROMATIC AG
GLATT GMBH
AEROMATIC AG
GLATT
GLATT AG
EUROVENT
GLATT GMBH
GLATT GMBH
GLATT GMBH
GLATT
GLATT
GLATT GMBH
GLATT GMBH
AEROMATIC
GEA AEROMATIC
GLATT
AEROMATIC
GLATT
GLATT GMBH
GLATT AG
AEROMATIC
GLATT
Type
Capacity (Ltr.)
Strea-1
2,0
Combi Coata 1
2,0
Uni-glatt
2,0
Strea-1
2,0
Uniglatt
3,0
Uniglatt
3,0
CPSG-1
6,0
GPCG-3
7,0
GPCG-3
8,5
GPCG-3
8,5
WSG-5
20,0
WSG-5
20,0
GPCG-5
22,0
GPCG-5 Spezial
22,0
S-2
25,0
TSG-2 B5 F4
47,0
WSLD 40
130,0
S-4
210,0
WSG-60
220,0
Wurster 32”
417,0
WST-CD 120/200
500,0
S-7
790,0
GPCG-1000
5243,0
Material
Plastic
SS/Glass
1.4404
Plastics
SS
SS
316
1.4301
SS
1.4301
SS
SS
SS
1.4301
SS
SS
SS
SS
SS
SS
316
SS
316L
PLATE DRYERS
Motor (KW)
0,37
1,1
1,1
1,1
1,1
2,2
3,0
2,2
2,2
2,5
11,0
11,0
18,5
3,3
Partnr.
048B330
026H093
026H094
080B466
102S440
Make
BABCOCK-BSH
KRAUSS MAFFEIGT
KRAUSS MAFFEIGT
KRAUSS MAFFEI
KRAUSS MAFFEI
Type
T-3/2000
GTT 20/8
GTT 20/8
VTT 20/23
GTT 27/29
Surface (M2)
7,5
20,0
20,0
57,5
145,0
Material
SS
1.4571
1.4571
1.4404
1.4571
Motor (KW)
3,0
1,5
1,5
4,0
6,8
10,0
15,0
47,0
200,0
095X524 EUROVENT FLUIDBED DRYER/GRANULATOR,
type CPSG-6, pan capacity 6 ltr.,
electric heating.
048B330 BSH-BABCOCK
PLATE DRYER, type Tellertrockner T-3/200, heating surface
7,5 m2.
263K280 GLATT FLUIDBED
DRYER/GRANULATOR, type
GPCG-3, with 3 pans, steam
heated.
102S440 KRAUSS MAFFEI
GAS TIGHT PLATE DRYER,
type GTT 27/29, heating surface
145 m2, stainless steel (1.4435).
036F160 GLATT FLUIDBED
DRYER, type Uni-Glatt, pan
capacity 2 ltr., with wurster pan.
061H331 NIRO ATOMIZER COPENHAGEN FLUIDBED DRYER,
type VF size 5, surface 5,0 m2, stainless steel.
026H093 KRAUSS MAFFEI GAS TIGHT PLATE DRYER, type GTT
20/8, heating surface 20 m2, stainless steel (1.4571).
FILM EVAPORATOR
Partnr.
168N768
073H321
017C109
115S448
195D865
042B291
102S396
041U332
036F156 VIBRA SCHULTHEIS FLUIDBED DRYER, type VF 50/15,
stainless steel (1.4301), surface 6,5 m2, bed size 5000x1500 mm,
Conidur plate, with end dryer DVW-10, with 3 fans, with heat
exchangers.
050F242 GEA AEROMATIC
FIELDER FLUIDBED DRYER,
type TSG-2, complete with heat
exchanger, fan and control cabinet, pan 47 ltr.
Make
LUWA
BUSS-SMS
LUWA-SMS GMBH
LUWA
LUWA
BUSS-SMS
LUWA AG
BUSS-SMS
Type
Surface (M2)
KV 40
0,4
LN-0050
0,5
LN-0050
0,5
NL 210-1600-10
1,0
D
1,2
LB-0200
2,0
MLK4-600SPEZ
5,3
HS-1200
12,0
Material
SS
1.4404
1.4571
SS
SS 316
1.4571
316
MS/316L
Motor (KW)
3,0
2,0
1,25/2,0
3,0
No motor
18,4
280,0
055A268 AEROMATIC FLUIDBED DRYER, type S-2, pan
capacity 25 ltr., steam heated,
with sprayer.
017C109 LUWA-SMS FILM EVAPORATOR, type LN-0050, heating
surface 0,5 m2, stainless steel (1.4571), with condenser.
071Z285 GLATT PARTICLE
COATER GRANULATOR,
GPCG-5, pan cap. 22 ltr.,
Stainless steel (1.4301) Electric
heating, with fan.
039B234 GLATT FLUID BED
DRYER, type Wurster 32”, pan
capacity 417 ltr., steam heated,
with fan.
239K197 VENTILEX CONTINUOUS FLUID BED DRYER, type FBD
9,6/1,7, bed size 8000x1200 mm, surface 9,6 m2, with fans.
073H321 BUSS-SMS BUTZBACH FILM EVAPORATOR, type
LN-0050, heating surface 0,5 m2, stainless steel (1.4404).
090Y683 GLATT FLUIDBED DRYER, type GPCG-1000, stainless
steel (316L), pan capacity 5243 ltr., with sprayer, fan (200 kW) and
filters.
081F396 NIRO ATOMIZER COPENHAGEN CONTINUOUS
FLUIDBED DRYER, type Vibro-Fluidizer M77, heating surface
11,0 m2, without fans and heat exchanger.
A. Foeth b.v.
-
Offer us your surplus equipment
Barneveld
The Netherlands
-
Tel. 0031 (0)342415551
Fax 0031 (0)342417845
023C129 RUTZ INDUSTRIEANLAGEN FALLING FILM EVAPORATOR, type DN-400, stainless steel (1.4571), heating surface 12,5 m2.
E-mail:
[email protected]
Website: www.foeth.nl
JANUARI 2017
15
TRAY DRYERS
098F495 PROVATECH VACUUM TRAY DRYER, type VTP
700/930, heating surface 1,0 m2,
electric heating.
DRYING OVENS
057H233 VÖTSCH VACUUM
TRAY DRYER, type VHT 65/50,
heating surface 1,25 m2, stainless steel.
049E168 PINK VACUUM TRAY DRYER, type VSD 850-950-200-5,
heating surface 4 m2, with oil heater, stainless steel (1.4571), 5 trays
each 900x940 mm.
048H198 BABCOCK-BSH
VACUUM TRAY DRYER, type
vakuum Schrank Trockner
11/75/100/3, heating surface
8,25 m2, stainless steel (1.4571).
048H196 PINK THERMOSYSTEME WERTHEIM
VACUUM TRAY DRYER, type
VSD 1020-1000-120-9, heating
surface 9,18 m2, Contact parts
in 1.4539/904 L.
Partnr.
026E105
010Z049
069P338
264K291
264K290
264K292
044F204
044F208
044F206
044F205
061H245
044B259
044B258
061H244
056F372
061H266
040F258
061H261
037H103
061H243
119E566
061H265
061H264
061H268
061H260
044B254
044F200
061H262
075F381
061H270
050F250
019Y152
004F006
044F197
016G050
050F236
050F237
079B442
044B263
044B253
046C160
106Z375
050F238
060X712
050A271
036A191
036A192
Make
EVANS LTD LEEDS
HERAEUS VÖTSCH
HERAEUS
NABERTHERM
NABERTHERM
NABERTHERM
NABERTHERM
NABERTHERM
NABERTHERM
NABERTHERM
SALVIS AG
NABERTHERM
NABERTHERM
HERAEUS/THERMO
GALLENKAMP UK
HERAEUS HANAU
NARCO
HERAEUS HANAU
KENDRO LABORATO
HERAEUS HANAU
GEMCO
MEMMERT GMBH
MEMMERT GMBH
BINDER GMBH
BINDER GMBH
NABERTHERM
NABERTHERM
HERAEUS HANAU
HERAEUS HANAU
HERAEUS/THERMO
SALVIS RENGGLI
WTB BINDER
VOETSCH GMBH
ROHDE GMBH
VÖTSCH GMBH
GLATT PRATTELN
GLATT PRATTELN
LYTZEN DENMARK
NABERTHERM
NABERTHERM
HERAEUS HANAU
LB BOHLE
GLATT PRATTELN
HERMANN WALDNER
D.O.S. DUTCH OVEN
LYTZEN DENMARK
LYTZEN HERLEV
Type
Capacity (Ltr.)
Zinc cricible
Umluftofen
MR-170
4,0
N 770/65 HAS
770
N 770/65 HAS
770
N 770/65 HAS
770
N-11/R
11,0
N-11/R
11,0
N-11/R
11,0
N-11/HR
11,0
KVTS-11
20,0
N-20/HR
20,0
N-20/H
20,0
VT-6025
25,0
OVA 031.XX 1.5
25,0
T-6030
30,0
36,0
VTR-5036
45,0
VT-6060 M
50,0
VT-5042 EK
50,0
50,0
ULM-400
53,0
UM-400
53,0
MK-53
53,0
VD-53
53,0
N-60/HR
60,0
LH-60/14
60,0
UT-6120
75,0
BTR-5050
125,0
VT-6130 P
128,0
TKL/G 154
140,0
140,0
NTU 60/40/60
144,0
KE-250 S
250,0
EFU 60/60
250,0
GHT-200
900,0
GHT-200
900,0
C
1000,0
1000,0
W-1000/H
W-1000/H
1000,0
STUF-D
1500,0
LS-30
1800,0
GHT-400
1800,0
HC-15.2 N
1885,0
2500,0
3000,0
H-1
3000,0
Material
1.4301
MS
MS
MS
SS
SS
SS
SS
Aliminium
SS
SS
MS
SS
SS
SS
SS
SS
SS/ALU
SS
SS
Copper
1.4301
MS
1.4301
1.4301
SS
SS
1.4301
1.4301
1.4571
MS
SS
SS
Temp. (ºC.)
250
1000
650
650
650
1100
1100
1100
1280
150
1340
1340
200
200
250
120
180
200
250
850
220
200
–40/+180
200
1340
1400
300
180
300
90
180
400
1320
500
100
100
300
1340
1340
230
061H268 BINDER TEMPERATURE TEST CHAMBER, type
MK-53, capacity 53 ltr., temperature range –40/+180 ºC.
100
100,0
200
200
264K292 NABERTHERM FORCED CONVECTION OVEN, type
N-770/65 HAS, max. 650ºC, capacity 770 ltr.
050F237 GLATT DRYING OVEN,
type GHT-200, capacity 900 ltr.,
steam heated, max. 100 ºC.
061H270 HERAEUS THERMO
ELECTRON VACUUM DRYING
OVEN, type VT-6130 P, heated
shelves, max. 300 ºC.
004F006 VÖTSCH DRYING
OVEN type NTU 60/40/60-SGMP, max. 400ºC, capacity
144 ltr., electric heating, 21,6 kW.
010Z049 HERAEUS VÖTSCH PATERNOSTER OVEN, type 40-4050-1800 Umluftofen, max. 250 ºC, electric heating, 38 grates each
1800x800 mm.
034F278 LEIBLEIN GMBH INFRARED-DRYING DRUM/EVAPORATOR, type IR Verdampfer 1200-3000 E, stainless steel, roll dia.
1200x3000 mm.
EVAPORATOR
029G095 BÜCHI ROTAVAPOR, type R-187 Ex,
capacity 50 ltr., with condensor and 2 receiving
flasks.
061C294 VÖTSCH TRAY DRYER, type NTW-100/150, heating surface 10 m2, 11 trays each 950x980 mm, with oil heater.
044B253 NABERTHERM DRYING OVEN, type W-1000h, max. temperature, 1340 ºC capacity 1000 ltr., electric heating (75 kW).
CENTRIFUGAL DRYER
004B190 BKG BRUCKMANN & KREYENBORG CENTRIFUGAL
050F341 SCHERRER AG VACUUM TRAY DRYER, heating surface
10 m2, 8 trays, each 1250x1000 mm, stainless steel with halar coating. DRYER, with tempered water system, type TWE A-2000.
A. Foeth b.v.
-
Barneveld
The Netherlands
-
Tel. 0031 (0)342415551
Fax 0031 (0)342417845
ROTATING DRUM DRYER
029H148 ROTATING DRUM DRYER/COOLER, make unknown,
stainless steel, drum dia. 1950x8000 mm.
E-mail:
[email protected]
Website: www.foeth.nl
JANUARI 2017
16
PADDLE DRYERS
053F255 LITTLEFORD DAY PLOUGH
SHARE DRYER, type FM-130D, useful
capacity 85 ltr., jacket 5 bar, stainless steel
(304).
068G310 CONTINUOUS DRYER/SPIRAL ELEVATOR MAKE JÖST
DÜLMEN, type WUFS 600/1400, stainless steel (1.4301), jacket
(5 bar). HAS NEVER BEEN USED.
268K300 GLATT INOX PADDLE DRYER,
type IST-2000, capacity 2000 ltr., stainless
steel, hydraulic drive.
021C037 LIST CONTINUOUS PADDLE DRYER, type DTB-1000
Conti Discotherm, capacity 1180 ltr., stainless steel (1.4571), motor
37 kW.
051H193 AVA-HUEP PADDLE DRYER, type HTC-VT 250, capacity
250 ltr., stainless steel, with vacuum pump, – RECONDITIONED –.
028Y275 DRAIS VACUUM PADDLE DRYER, type HT-160, stainless
steel (1.4571), easy clean, capacity 160 ltr., motor 12 kW.
090B548 LÖDIGE PADDLE DRYER, type VT-2000, stainless steel
(1.4571), jacket (6 bar), capacity 2000 ltr., motor 45 kW.
016A123 LÖDIGE PADDLE DRYER, type Druvatherm
DVT-6300, capacity 6300 ltr., vac./6 bar, stainless steel (1.4571)
– RECONDITIONED –.
101Y787 BUS-SMS ’ROVACTOR’ DISC SEGMENTS DRYER, type
NCE-3800-CD/CF, stainless steel (1.4571), cap. 3950 ltr., heated shaft,
jacket (16 bar), max. temperature 250 ºC + heating surface ± 40 m2.
VERTICAL PROCESS DRYERS
071H365 LÖDIGE PADDLE DRYER, type
DVT-130 Druvatherm, capacity 130 ltr., stainless steel (1.4571), – RECONDITIONED –.
PLEASE READ
Since we buy, sell and change listings daily, all items listed are subject to prior sale, withdrawal, or other disposition. And, while we
strive for complete accuracy, we cannot be responsible for errors or omissions in equipment, discriptions, typographical errors etc.
244K214 ECI LUSSAN ADEILHAC PADDLE DRYER, type Secheur
a palette, capacity 250 ltr., in hastelloy C-22 execution, shaft can
be heated.
045C405 FORBERG TWIN SHAFT PADDLE DRYER, type F-1000,
capacity 1000 ltr., stainless steel (316), – RECONDITIONED.
053F257 DRAIS WERKE TURBULENT VACUUM DRYER, type
HT-1000 A “Easy clean”, capacity 1000 ltr., stainless steel (1.4541),
jacket, motor 50/70 kW – RECONDITIONED –.
237K180 ROSENMUND GUEDU
PAN DRYER, type GRD-90B,
capacity 90 ltr., with chopper.
A. Foeth b.v.
-
Barneveld
The Netherlands
-
233K176 GMF GOUDSCHE MACHINE FABRIEK TWINSHAFT
NARA PADDLE DRYER, type 10W80, capacity 6500 ltr., total heating surface 79,1 m2.
042B311 KÖLLEMANN 4-SHAFT SCREW DRYER, type AJK-QTHSF-DN600 Schneckenwärme
tauscher, built in 2004, stainless steel (304), 2 pieces available, motor 15 kW.
Tel. 0031 (0)342415551
Fax 0031 (0)342417845
E-mail:
[email protected]
Website: www.foeth.nl
JANUARI 2017
17
COATING PANS
201K004 WALTER BRUCKS COATING
PAN, type Modell 11, drum dia. 1200 mm,
batch size ± 130 kg.
043E202 MANESTY ACCELA-COTA 60",
SUGAR- AND FILM COATER, drum dia.
1525 mm, motor 7,5 kW.
056C286 GLATT AG DRUM COATER, type GC-490/500/600/750
(7 interchangable drums included), stainless steel (1.4435), steam
heated.
270K282 WALTER BRUCKS COATING
PAN, modell X, drum dia. 1600 mm, batch
size ± 250 kg.
055H286 IMA INDUSTRIA MACCHINE AUTOMATICHE DRUM
COATER, type GS Evolution HT-600F “Solid wall”, drum dia.
2000 mm, batch size 350-600 ltr.
CONTINUOUS REACTORS
051G200 WERKHUIZEN SCHEPENS CONTINUOUS DRUM COATER, drum Dia. 1200x6000 mm, closed drum, motor 11 kW.
043E201 HÜTTLIN FILM COATING LINE, type Butterfly HB-750,
drum dia. 2070 mm, electric heating, batch size 200-600 kg, with fan
and filters.
STAINLESS STEEL STORAGE TANKS/SILO’S
071E296 DE DIETRICH VERTICAL PRESSURE
TANK, glass lined, capacity 2530 ltr., vac./6 bar.
039E134 BÄUCHLE HORIZONTAL TANK with
jacket, stainless steel (1.4571), capacity 7500 ltr.
215K048 IKA WERKE DISPAX REACTOR, type
DR-2000, Rotor dia. 280 mm, motor 90 kW.
062Y365 IKA-JANKE & KUNKEL DISPAX REACTOR, type DRS 2-10, rotor Dia. 65 mm, motor
15,0 kW.
VARIOUS PACKAGING MACHINERY
218K052 BINDER VERTICAL
PRESSURE
TANK, capacity
1000 ltr., Jacket,
in Hastelloy
(2.4610) execution.
113Z448 ORTMANS HORIZONTAL PRESSURE
VESSEL, capacity 10.000 ltr., stainless steel
(1.4404).
014Y168
OMVE NETHERLANDS
CARBONISATION UNIT,
type Carbo-Fill
CF-97 SF, with
capper.
240K185
TONAZZI
TUBE FILLER,
type Colibri-40,
for aluminium
tubes.
DE-AERATORS
CANDLE FILTERS
AERATING SYSTEMS
237K243 EATON HAYWARD
MAXILINE MULTI BAG FILTER,
type VMBF-0802, filter surface
4,0 m2.
018X238 KORUMA VACUUM DE-AERATOR, type
ERV-4, capacity 1500-3500 ltr./Hr, centrifugal disc.
A. Foeth b.v.
-
115Z441 MONDOMIX LABORATORY AERATOR,
Type A-05 mini compact, capacity 5-45 Kg/Hr.
Barneveld
The Netherlands
-
090F475 HOSOKAWA MICRON
EUROPE CANDLE FILTER
WITH ROTARY VALVE, filter surface 2,5 m2, stainless steel.
078B465 DRM DR MÜLLER FUNDABAC FILTER,
type R-10.3, stainless steel (1.4571), filter surface
10,3 m2.
Tel. 0031 (0)342415551
Fax 0031 (0)342417845
091F470 DRM DR. MÜLLER
FUNDABAC FILTER, filter surface 1,2 m2 – Contact parts in
Hastelloy (2.4602).
095F510 BHS SONTHOFEN CANDLE FILTER,
type KT-19-12, stainless steel (1.4571), filter surface 6,0 m2, various available.
E-mail:
[email protected]
Website: www.foeth.nl
JANUARI 2017
18
CONICAL DRYERS
185M695
ENGELSMANN
SCREW
DRYER, type
VT-KSM 2800,
capacity 3900
ltr., stainless
steel (1.4541),
motor 22 kW,
shaft can be
heated, with
filter.
075G368 BOLZ CONICAL DRYER, type MF-125, capacity 1000 ltr.,
stainless steel (1.4301), cantilevered screw – RECONDITIONED –.
036E161 BOLZ CONICAL RIBBON DRYER, type ML-0015,
capacity 25 ltr., contact parts in
HASTELLOY.
113Z445 BOLZ GMBH
WANGEN, CONICAL DRYER,
type MF-030, capacity 300 ltr.,
stainless steel (1.4404/316L).
012E078 VRIECO CONICAL DRYER, type T60 RB-3, capacity
6000 ltr., stainless steel (1.4571), with filter, motor 11 kW.
SPRAY DRYERS
065E265 & 065E266 ROTARY
ATOMISER FOR SPRAY
DRYER, make Niro Atomizer
Denmark, Type F-60 BBE16,
atomiser Dia. 210 mm, motor
44 kW, 2 pieces available.
Machinehandel A. Foeth B.V.
dealers in used process
equipment since 1908!
058H375 HOSOKAWA MICRON EUROPE CONICAL DRYER, type
40-VDC-26, capacity 4000 ltr., stainless steel (304), 2 pieces available – RECONDITIONED –.
091F525 VRIECO CONICAL DRYER, type 20 VB-S, stainless
steel (316), capacity 2000 ltr., vac./6 bar, cantilevered screw.
– RECONDITIONED –
TUMBLER DRYERS
Partnr.
054S182
050F334
073H318
050C396
018W114
017U147
040B265
093X473
227K088
079G384
010F038
120S473
120S472
033H112
079G412
079G385
091F527
006X014
040G133
006X013
016A189
044U272
178P855
093Z368
026Z151
Make
PATTERSON & KELLEY
DE DIETRICH
ITALVACUUM
EDAK AG DACHSEN
APEX
ALB. KLEIN
KLEIN GMBH
DE DIETRICH
ITALVACUM
ITALVACUUM
ITALVACUUM
ENGELSMANN
ENGELSMANN
DE DIETRICH
ITALVACUUM
ITALVACUUM
DE DIETRICH
DE DIETRICH
DE DIETRICH
DE DIETRICH
PFAUDLER WERKE
PFAUDLER
PFAUDLER
ENGELSMANN
KLEIN FREUNDENBE
Type
Capacity (Ltr.)
11,0
SR-250
285,0
Criox RBG-350 H
350,0
500,0
GR 311-565
565,0
1000,0
DKT-1000
1000,0
SR-1000
1040,0
RBGS-3000
1200,0
Criox RB-1500
1500,0
RBG-2000
2052,0
2070,0
2070,0
SR-2500
2500,0
Criox RB-2500
2500,0
Criox RB-2500
2500,0
SR
2550,0
SR-2500
2550,0
SR-2500
2550,0
SR-2500
2550,0
MT-3000
3180,0
MT-4000
4100,0
7000,0
TM-10.000
10.000,0
10.000,0
Material
SS
Glass
Hastelloy
1.4435
316
1.4435
1.4571
Glass
316
316L
316
SS
SS
Glass
316L
316L
Glass
Glass
Glass
Glass
Glass
Glass
Glass
1.4571
1.4571
Motor (KW)
0,75
1,1
0,75
2x 11,0
1,5
2,0
3,0
0,47/0,95
1,5
3,0
4,0
1,5
5,5
4,0
4,0
0,55
1,5
0,55
7,5
12,0
1,5
22,0
5,5
050F334 DE DIETRICH GLASS LINED DOUBLE CONE TUMBLER
DRYER, type SR-250, capacity 285 ltr., vac./6 bar, motor 0,75 kW,
jacket vac./10 bar.
ROLL DRYERS
079C354 GMF GOUDSCHE
MACHINE FABRIEK ROLL
COOLER/FLAKER, type KBO
5/5, single roll, surface 0,785 m2.
017C091 SULZER-ESCHER WYSS COOLING DRUM/FLAKER,
type EKO-1890, roll surface 18,95 m2, roll dia. 1500x4000 mm.
A. Foeth b.v.
-
073H318 ITALVACUUM DOUBLE CONE TUMBLER DRYER, type
Criox RBG-350, capacity 350 ltr., with 2 choppers, in Hastelloy
(2.4602) Execution.
033H112 DE DIETRICH GLASS-LINED DOUBLE CONE TUMBLER
DRYER, type SR-2500, reglassed in 2008, unused ever since.
010F038 ITALVACUUM DOUBLE CONE TUMBLER DRYER, capacity 2052 ltr., stainless steel, (316), with condenser.
093Z368 ENGELSMANN TUMBLER DRYER, type TM-10.000,
capacity 9700 ltr., vac./4 bar, stainless steel (1.4571).
Barneveld
The Netherlands
-
Tel. 0031 (0)342415551
Fax 0031 (0)342417845
E-mail:
[email protected]
Website: www.foeth.nl
JANUARI 2017
19
029H145 WERNER & PFLEIDERER TWIN SCREW EXTRUDER,
type Continua 120/16 D, screw dia. 120 mm, DC-motor 225 kW.
066Z352 BUSS COMPOUNDING SYSTEMS, Co-kneader, type
Eco 46p, with Jacket, motor 11 kW, with PW-50 discharge unit.
042B319 BERSTORFF TWIN SCREW EXTRUDER, type ZE-130R,
screw dia. 150 mm, L/D 10, motor 90 kW.
HOT MIXERS
Partnr.
049C229
016G044
019E087
107Z384
207K158
207K157
098W473
017N092
031T112
135P600
029U175
079B430
049P215
087S299
079B431
062F296
049A277
041F169
015U088
021S067
Make
MTI MISCHTECHNIK
THERMO ELECTRON
MTI MISCHTECHNIK
PAPENMEIER
CACCIA ITALY
CACCIA ITALY
DIOSNA
SPANGENBERG
PAPENMEIER
PAPENMEIER
HIKARI
HENSCHEL
THYSSEN HENSCHEL
HENSCHEL
THYSSEN HENSCHEL
MTI MISCHTECHNI
DIOSNA OSNABRÜCK
PAPENMEIER
THYSSEN HENSCHEL
THYSSEN-HENSCHEL
Partnr.
004U064
004U068
030H080
099Y827
040C133
049A278
083G411
094F478
005H005
044W198
053E226
053E227
014F047
Make
THYSSEN HENSCHEL
THYSSEN HENSCHEL
MIXACO GMBH
MIXACO
MIXACO GMBH
MIXACO
DIOSNA
GEBR. RUBERG
DIOSNA
PRECI-MECA
MIXACO
MIXACO
MIXACO
Type
Capacity (Ltr.)
M 1,5
1,5
Prism Pilot 3
2,0
M3
3,0
TGHK-8
8,0
Labo-10
10,0
Labo-10
10,0
R10-A
10,0
SD 20/FT
20,0
TSEH/KGU
35,0
NOSHK 75/90
90,0
D-100
100,0
FM-150 D
150,0
FM 200
200,0
250,0
FM-250 MB
250,0
EM-300 B
300,0
R-600 A
600,0
N-TSHK 630/HCC 630,0
FM-1000 E
1000,0
FM 1500
1500,0
Material
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
1.4571
SS
SS
Motor (KW)
2,2
1,1
1,5
3,0
3,3/4,0
3,3/4,0
1,6/3,2
1,85
11,0/3,5
7,5/9,0
11,0
22,0/32,0
37,0
63,0/85,0
36,0/50,0
11,0
52,0/80,0
145+37
70/110
100/132
Material
SS
1.4541
SS
SS
SS
SS
SS
1.4301
SS
304L
SS
SS
SS
Motor (KW)
15,0+30,0
15,0+5,5
4,0
3,0
3,0
4,0
3,7/4,4
7,5
13,0/16,0
18,5+5,5
22,0
37,0
90,0
Material
SS
Motor (KW)
3,0
75,0
COLD MIXERS
047F218 WERNER & PFLEIDERER TWIN SCREW EXTRUDER,
type Continua 37/14 D, screw dia. 37 mm, – RECONDITIONED –.
Type
Capacity (Ltr.)
TK/D 250
TK/D 125
7,5
LAB CM 6-12
12,0
LAB CM-12-DISP
12,0
LAB CM 3-12-D
12,0
CM-50
50,0
V-100
100,0
FCM-200 SR
200,0
V-400A
400,0
VL-II 400
400,0
CM-100
800,0
CM-1000 S
800,0
CM-2000 D
1600,0
094F478 RUBERG BARREL
BATCH MIXER, type FCM200 SR, with lump breaker.
207K158 CACCIA ENGINEERING HOT MIXER, type LABO-10
Turbo mixer, motor 3,4/4,0 kW.
INTERNAL MIXERS
Partnr.
Make
Type
049N155 MEILI
CK 1
007X316 WERNER&PFLEIDERER LH-20
Capacity (Ltr.)
1,0
20,0
PELLETISERS
Partnr.
Make
063S235 SCHEER&CIE
Type
HSG400
Width (mm)
400
Dia. (mm) Motor (KW)
200
22,0
GRANULATORS
Partnr.
063B352
003U028
032S114
026N542
038Z214
167K644
038Z213
038Z215
004K022 KRAFTANLAGEN HEIDELBERG SINGLE SHAFT PIN
EXTRUDER, type ST-350/6D, with DC motor 180 kW.
Make
PALLMANN
DREHER
DREHER
TRIA
PALLMANN
PALLMANN
PALLMANN KG
PALLMANN KG
Type
Width (mm)
PS-2
105
S34/41 GF
410
S 26/41 GFS-RS
410
400/ELR
420
PS 8-12
1200
PS 8-12
1200
PS 8-15
1500
PS 12-18
1800
Dia. (mm) Motor (KW)
165
3,0
340
18,5
260
5,5
400
15,0
800
132,0
800
No motor
800
155,0
1200
315,0
YOU CAN FIND OUR COMPLETE LIST ON OUR
WEBSITE WWW.FOETH.COM
027H067 LEISTRITZ TWIN SCREW EXTRUDER, type ZSE-40
GL/48D, screw dia. 40 mm, electric heating, motor 45 kW.
063B352 PALLMANN GRANULATOR, type PS-2, stainless
steel, rotor dia. 165 mm, motor
3,0 kW.
041F169 PAPENMEIER MASCHINENBAU “PXX COMPOUNDER”,
type N-TSHK-630/HCC-2000, capacity high speed mixer 630 ltr.,
capacity cooling mixer 2000 ltr., motor 115/145 kW.
004B190 BKG BRUCKMANN & KREYENBORG CENTRIFUGAL
DRYER, type TWE/A-2000, with tempered water system.
A. Foeth b.v.
-
Barneveld
The Netherlands
-
009U020 PALLMANN GRANULATOR, type PS-200/300, rotor
dia 200 mm, motor 4,0 kW.
Tel. 0031 (0)342415551
Fax 0031 (0)342417845
005H005 DIOSNA UNIVERSAL MIXER, type V-400 A, capacity
400 ltr., stainless steel, with chopper.
038Z215 PALLMANN ZWEIBRÜCKEN GRANULATOR, type
PS 12-18, rotor dia. 1200x1800 mm, motor 315 kW.
014F047 MIXACO NEUENRADE CONTAINER MIXER, type
CM-2000D, motor 90 kW, capacity 1600 ltr. – RECONDITIONED –
E-mail:
[email protected]
Website: www.foeth.nl
JANUARI 2017
20
Premises in Barneveld – the Netherlands
with a total area of 32,000 sq.m.
Type
HV
HV
HV
HV
HV
HV
HV
Working Total Cone Diameter Motor Weight
capac- height height (in mm) (kw) (kgs)
ity
(A)
(B)
(C)
50*
50 1222
860
300
300 2415 1530
600
600 2729 1844
1000
1000 3069 2184
1500
1500 3425 2500
2000
2000 3725 2800
3000
3000 4125 3200
* HV 50 Standard with legs
730
1300
1492
1560
1753
1936
2180
0,75
3,0
3,0
3,0
4,0
4,0
5,5
250
600
650
700
800
900
1000
Some additional
information:
Material of construction:
stainless steel 304
Speeds HV50: arm 5 rmp,
screw 85 rpm
Speeds HV200-3000: arm 2 rpm,
screw 60 rpm
All mixers will be offered without
electrical controls and legs with
the exception of the HV50 which is
offered with legs.
A. Foeth b.v.
-
Barneveld
The Netherlands
-
Tel. 0031 (0)342415551
Fax 0031 (0)342417845
E-mail:
[email protected]
Website: www.foeth.nl