Transcript BENDING

http://b2b.op-srl.it/prodotti_stampa.asp?COD_Prodotto=CUR
Ref.nr.: 1476-CURCM42
BENDING
OP S.r.l.- Test machines, crimping, cutting and skiving flexible hose
Data sheet
BENDING MACHINE CM 42
This device was conceived for bending 6 to 42 mm diameter and 4 mm
maximum thickness rigid stainless steel (AISI 316 TI) and carbon steel
(ST 37.4) pipes.
The CM42 version can be fixed to any vice by means of the provided
fixing pin and it is actuated by a double effect manual pump.
bending
materials
dimensions l x w x h
weight
mechanical limit
switch
fixing pin
6 > 42x4 mm (0.236">1.654"x0.158")
AISI 316 TI - ST 37.4
420x780x710 mm
(16.535"x30.709"x27.952"")
40 KG (90 lbs)
incl.
incl.
OP S.r.l. Via Serpente, 97 - 25131 Brescia (Italy)- Tel. +39 030.3580401- Fax +39 030.3580838 - http://www.op-srl.it
Oud-Beijerland
Willem Beukelszstraat 1
3261 LV Oud-Beijerland
Nederland
Telefoon: +31(0)186 620 777
Brussel
Otto de Mentockplein 19
1853 Strombeek - Bever
België
Telefoon: +32(0)2 267 41 14
www.hydroflex.nl
Rotterdam
Geyssendorfferweg 63
3088GJ Rotterdam
Nederland
Telefoon: +31(0)10 283 90 00