Process Capability for chemistry control
Download
Report
Transcript Process Capability for chemistry control
PROCESS CAPABILITY ANALYSIS
FOR CHEMISTRY CONTROL
AT
NORTH STAR STEEL , BEAUMONT
A PROJECT BY GRADUATE STUDENTS OF LAMAR UNIVERSITY FALL 2001
TEAM-1
Course: ENGR 5312- Quality Assurance
Submitted on: Dec 3,2001
Project title: Control charts and process capability by crew- for meeting
guideline aim ranges of controllable elements C, Mn and Si of steel, a study
carried out at NSS.
Team members:
Anshu Srivastava
Suresh Putcha
E-mail:
E-mail:
[email protected]
[email protected]
Project Sponsor at NSS:
Pete Power
E-mail: [email protected]
PROBLEM DEFINITION
At North Star Steel, four crews namely A, B, C & D
are working on a large number of grades .
They try to achieve the constituents of steel set by
the customer to the closest standards. i.e. they try to
hit the target set for each element(C, Mn, Si…).
In this project we quantify the success achieved by
each crew in attaining this objective.
TERMINOLOGY
•Grade: specifies type of steel based on the
percentage of C, Mn, Si…. present in it.
Grade1012KZ-1 : C-0.135%, Mn0.55%, Si-0.14%)
Target or AIM: It is the exact percentage of a
constituent to be achieved in a specified grade of
steel.
SPEC: This is customer specified limit or range
within which the crew has to hit the target. USLupper limit, LSL-lower limit
DATA COLLECTED
SPEC and AIM values for 57 grades of steel
The heat chemistry analysis report that shows the
percentage of each element actually achieved by a
crew in a heat was collected.
the
This log of steel chemistry was printed for all
heats for three months August, September and October
2001.
DATA COLLECTED
GRADE
1006M6-2
1008A2-1
1008A39-1
1008A4-1
1008AISI1
1008AISI1
1008AS-2
1008AZB
1008M10-2
1008M11-2
1008M12-2
1008M13-1
1008M14-2
1008M15-1
1008M16-1
1008M-19-1
1008M20-1
1008M21-2
1008M22-2
1008M23-2
1008M4-1
1008M5-2
1008M6-1
1008M7-2
1008M9-2
1008MA-2
1008MB-2
1008MBR-3
1010A2-1
1010M11-2
1010M4-1
1010M5-1
1010M7-1
1010M8-1
1010M9-1
1012A3-2
1012AZB
1012B2
1012KZ-1
1012KZ-1
1012M11-2
1012M1-2
1012M12-2
1012M3-2
1012M7-3
1012M9-1
1013A1-2
1013AISI1
1013M4-1
1013M5-1
1013M6-2
1015A1-1
1015AISI1
1015KZ-1
1015M4-1
DW170
WXW10WZ-1
C-AIM
0.050
0.080
0.060
0.060
0.060
0.060
0.090
0.045
0.070
0.090
0.070
0.060
0.065
0.060
0.090
0.070
0.070
0.080
0.080
0.090
0.080
0.090
0.070
0.070
0.060
0.060
0.050
0.100
0.090
0.090
0.095
0.090
0.090
0.090
0.090
0.125
0.135
0.070
0.135
0.135
0.130
0.135
0.130
0.120
0.120
0.130
0.130
0.130
0.120
0.140
0.120
0.160
0.140
0.150
0.140
0.810
0.085
Mn-AIM
0.35
0.35
0.35
0.37
0.35
0.35
0.45
0.35
0.40
0.33
0.35
0.44
0.33
0.44
0.35
0.35
0.13
0.40
0.42
0.47
0.40
0.45
0.33
0.35
0.35
0.35
0.33
0.60
0.35
0.35
0.35
0.35
0.35
0.50
0.45
0.50
0.50
0.45
0.55
0.56
0.50
0.50
0.55
0.50
0.47
0.50
0.70
0.70
0.45
0.62
0.54
0.55
0.55
0.53
0.45
0.70
0.83
Si-AIM
0.10
0.11
0.10
0.11
0.09
0.09
0.11
0.12
0.25
0.09
0.10
0.10
0.17
0.13
0.14
0.13
0.13
0.10
0.20
0.20
0.11
0.11
0.10
0.10
0.10
0.13
0.13
0.18
0.13
0.13
0.12
0.10
0.17
0.10
0.11
0.20
0.15
0.14
0.14
0.14
0.18
0.20
0.09
0.03
0.03
0.12
0.13
0.13
0.14
0.17
0.18
0.18
0.15
0.12
0.14
0.24
0.10
The AIM targets for
% carbon
% manganese
% silicon
Assumption :
limits for the
error graph to
around 25% on
of the Aim.
the SPEC
percentage
be spread
either side
DATA COLLECTED
C
0.125
0.131
0.133
0.133
0.133
0.126
0.143
0.121
0.120
0.079
0.092
0.074
0.035
0.039
0.045
0.044
0.048
0.048
0.048
0.079
0.057
0.043
0.038
0.045
0.119
0.112
0.112
0.117
0.116
0.112
0.112
0.110
0.070
0.073
0.077
0.060
0.058
0.054
0.054
0.060
0.137
0.138
0.137
0.129
0.129
0.138
0.142
0.132
0.126
C-AIM
0.135
0.135
0.135
0.135
0.135
0.135
0.135
0.120
0.120
0.080
0.080
0.080
0.060
0.060
0.060
0.060
0.060
0.060
0.060
0.060
0.060
0.060
0.060
0.060
0.120
0.120
0.120
0.120
0.120
0.120
0.120
0.120
0.070
0.070
0.070
0.060
0.060
0.060
0.060
0.060
0.130
0.130
0.130
0.130
0.130
0.130
0.130
0.130
0.130
Mn
0.58
0.60
0.56
0.64
0.58
0.60
0.59
0.48
0.44
0.41
0.38
0.40
0.38
0.34
0.37
0.35
0.33
0.34
0.33
0.36
0.35
0.36
0.35
0.33
0.44
0.46
0.44
0.46
0.40
0.43
0.46
0.46
0.44
0.44
0.46
0.38
0.38
0.36
0.38
0.36
0.55
0.56
0.54
0.60
0.60
0.57
0.57
0.60
0.66
Mn-AIM
0.55
0.55
0.55
0.55
0.55
0.55
0.55
0.45
0.45
0.42
0.42
0.42
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.45
0.45
0.45
0.37
0.37
0.37
0.37
0.37
0.55
0.55
0.55
0.55
0.55
0.55
0.55
0.55
0.55
Si
0.12
0.16
0.14
0.14
0.17
0.19
0.17
0.15
0.15
0.18
0.17
0.20
0.08
0.09
0.09
0.10
0.09
0.15
0.14
0.11
0.09
0.08
0.08
0.09
0.15
0.14
0.14
0.14
0.14
0.16
0.16
0.15
0.14
0.13
0.14
0.09
0.12
0.12
0.10
0.12
0.11
0.11
0.09
0.11
0.11
0.10
0.09
0.12
0.10
Si-AIM Group
0.14
0.14
0.14
0.14
0.14
0.14
0.14
0.14
0.14
0.20
0.20
0.20
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.14
0.14
0.14
0.11
0.11
0.11
0.11
0.11
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.09
A
A
A
A
A
A
A
A
C
D
D
D
B
B
B
B
D
D
D
D
D
D
D
D
B
B
B
D
D
D
D
D
C
C
C
A
A
A
A
A
C
C
C
C
C
C
C
C
A
• Heat chemistry for three
months – August , Sept.
and October 2001 were
taken for analysis .
• A sample size of 125
heats for each crew was
analyzed .
PROCESS CAPABILITY
Cpk : Capability Analysis index.
It compares natural tolerances (6) of the
process with the specification range.
It is a ratio of the tolerance (the width of the
specification limits) to the actual spread.
DATA ANALYSIS
GROUP
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
CARBON C-AIM
C-DEVIATIONMANGENESE MN-AIM
MN-DEV
SILICON SI-AIM
SI-DEV
0.125
0.135
0.074
0.58
0.55
-0.055
0.12
0.14
0.143
0.131
0.135
0.030
0.60
0.55
-0.091
0.16
0.14
-0.143
0.133
0.135
0.015
0.56
0.55
-0.018
0.14
0.14
0.000
0.133
0.135
0.015
0.64
0.55
-0.164
0.14
0.14
0.000
0.133
0.135
0.015
0.58
0.55
-0.055
0.17
0.14
-0.214
0.126
0.135
0.067
0.60
0.55
-0.091
0.19
0.14
-0.357
0.143
0.135
-0.059
0.59
0.55
-0.073
0.17
0.14
-0.214
0.121
0.120
-0.008
0.48
0.45
-0.067
0.15
0.14
-0.071
0.060
0.060
0.000
0.38
0.37
-0.027
0.09
0.11
0.182
0.058
0.060
0.033
0.38
0.37
-0.027
0.12
0.11
-0.091
0.054
0.060
0.100
0.36
0.37
0.027
0.12
0.11
-0.091
0.054
0.060
0.100
0.38
0.37
-0.027
0.10
0.11
0.091
0.060
0.060
0.000
0.36
0.37
0.027
0.12
0.11
-0.091
0.126
0.130
0.031
0.66
0.55
-0.200
0.10
0.09
-0.111
0.138
0.130
-0.062
0.66
0.55
-0.200
0.11
0.09
-0.222
0.128
0.130
0.015
0.60
0.55
-0.091
0.10
0.09
-0.111
0.140
0.130
-0.077
0.55
0.55
0.000
0.10
0.09
-0.111
0.063
0.070
0.100
0.38
0.35
-0.086
0.14
0.13
-0.077
0.071
0.070
-0.014
0.33
0.35
0.057
0.13
0.13
0.000
0.066
0.070
0.057
0.36
0.35
-0.029
0.15
0.13
-0.154
0.066
0.070
0.057
0.36
0.35
-0.029
0.13
0.13
0.000
0.069
0.070
0.014
0.37
0.35
-0.057
0.13
0.13
0.000
0.071
0.070
-0.014
0.35
0.35
0.000
0.12
0.13
0.077
0.062
0.070
0.114
0.36
0.35
-0.029
0.13
0.13
0.000
0.061
0.070
0.129
0.37
0.35
-0.057
0.12
0.13
0.077
0.072
0.070
-0.029
0.37
0.35
-0.057
0.13
0.13
0.000
0.064
0.070
0.086
0.38
0.35
-0.086
0.10
0.13
0.231
0.041
0.130
0.685
0.33
0.50
0.340
0.10
0.09
-0.111
0.040
0.130
0.692
0.38
0.50
0.240
0.09
0.09
0.000
Assumption :
SPEC limits for the percentage error graph to
be spread around 25% on either side of the
target AIM.
RESULTS -Carbon
CAPABILITY ANALYSIS FOR CARBON(PERCENTAGE ERROR)
LSL
Process
USL Data
0.250000
Target
0.000000
LSL
-0.250000
Target
USL
B
C
A
D
-0.50
0.00
-0.25
Cpk
CREW
0.87 >
D
0.73 >
A
0.25
0.64 >
C
0.50
0.50
B
RESULTS -Manganese
CAPABILITY ANALYSIS FOR Mn(PERCENTAGE ERROR)
LSL
Process
USL Data
0.250000
Target
0.000000
LSL
-0.250000
Target
USL
B
A
C
D
-0.50
-0.25
Cpk
CREW
1.68 >
C
0.00
1.48 >
B
0.25
1.53 >
A
1.20
D
0.50
RESULTS - Silicon
CAPABILITY ANALYSIS FOR Si(PERCENTAGE ERROR)
LSL
Process
USL Data
0.250000
Target
0.000000
LSL
-0.250000
Target
USL
B
C
-0.50
A
D
-0.25
Cpk
CREW
0.00
0.58 >
A
0.56 >
C
0.25
0.51
B
> 0.36
D
0.50
RESULTS – CREW -A
CAPABILITY ANALYSIS FOR CREW-A
LSL
Process
USL Data
0.250000
Target
0.000000
LSL
-0.250000
USL
Mn
C
Cpk
C
Si
Mn
Target
Si
0.73
0.58
1.53
-0.50
-0.25
0.00
0.25
0.50
RESULTS – CREW -B
CAPABILITY ANALYSIS FOR CREW-B
LSL
Process
USL Data
0.250000
Target
0.000000
LSL
-0.250000
Target
USL
Mn
C
Si
Cpk
C
Si
Mn
0.50
0.51
1.48
-0.50
-0.25
0.00
0.25
0.50
RESULTS – CREW -C
CAPABILITY ANALYSIS FOR CREW-C
LSL
Process
USL Data
0.250000
Target
0.000000
LSL
-0.250000
USL
C
Si
Cpk
C
Si
Mn
Target
Mn
0.64
0.56
1.68
-0.50
-0.25
0.00
0.25
0.50
RESULTS – CREW -D
CAPABILITY ANALYSIS FOR CREW-D
LSL
Process
USL Data
0.250000
Target
0.000000
LSL
-0.250000
Target
Mn
Cpk
C
Si
Mn
USL
C
Si
0.87
0.36
1.20
-0.50
-0.25
0.00
0.25
0.50
RESULTS
We have graded the crews on a 4-point
scale.
CREW
CARBON
MANGANESE
SILICON
Total
Points
A
3
2
4
9
B
1
3
2
6
C
2
4
3
9
D
4
1
1
6
Ranking can be awarded as A >C > D > B
CONCLUSIONS
•A hits the target very well .
•D is good in hitting carbon only .
•B is average across all the grades .
•C has to improve on hitting carbon %
•Looks like Silicon % is a low priority
across crews .
THANK YOU !