Transcript Cisco_UCM_SIP_Trunking

AARNet Copyright 2011
Cisco Unified
Communications Manager
SIP Trunking
Network Operations
Bill Efthimiou
APAN33 SIP workshop
February 2012
AARNet Copyright 2011
Agenda
• Basic CUCM setup
• Partitions
• Calling Search Spaces
• Number Manipulation
• SIP trunking
• Early offer vs Delayed offer
• Demo call via workshop SIP server.
2
AARNet Copyright 2011
Basic CUCM Setup – Activate required services
3
AARNet Copyright 2011
Basic CUCM Setup – Cisco Unified CM
Auto Registration
4
AARNet Copyright 2011
Basic CUCM Setup – Cisco Unified CM Group
•Redundancy
•primary vs
secondary
5
AARNet Copyright 2011
Basic CUCM Setup – Phone NTP References
6
AARNet Copyright 2011
Basic CUCM Setup – Date/Time Groups
7
AARNet Copyright 2011
Basic CUCM Setup – Locations (Call Admission Control)
Use locations to implement
call admission control in a
centralized call-processing
system. Call admission
control enables you to
regulate audio quality and
video availability by limiting
the amount of bandwidth that
is available for audio and
video calls over links
between the locations.
8
AARNet Copyright 2011
Basic CUCM Setup – Device Pool
AARNet Copyright 2011
Basic CUCM Setup – Enable CDR
AARNet Copyright 2011
Basic CUCM Setup – Media Resource Group
AARNet Copyright 2011
Basic CUCM Setup – Media Resource Group List
12
AARNet Copyright 2011
CUCM Partitions
The dial plan entries that you may place in a partition include IP
phone directory numbers, translation patterns, route patterns, CTI
route points, and voicemail ports. If two or more dial plan entries
(directory numbers, route patterns, or so forth) overlap, Unified CM
selects the entry with the closest match (most specific match) to the
dialed number. In cases where two dial plan entries match the dialed
pattern equally, Unified CM selects the dial plan entry that appears
first in the calling search space of the device making the call.
Source: Cisco Unified Communications System 8.x SRND
AARNet Copyright 2011
CUCM Calling Search Spaces
A calling search space defines which partitions are accessible to a
particular device. Devices that are assigned a certain calling search
space can access only the partitions listed in that calling search space.
Attempts to dial a DN in a partition outside that calling search space
will fail, and the caller will hear a busy signal. If you configure a
calling search space both on an IP phone line and on the device (phone)
itself, Unified CM concatenates the two calling search spaces and
places the line's calling search space in front of the device's calling
search space.
Source: Cisco Unified Communications System 8.x SRND
AARNet Copyright 2011
CUCM – Partition Order
Source: Cisco Unified Communications System 8.x SRND
15
AARNet Copyright 2011
CUCM – Concatenation of Line and Device CSS
Source: Cisco Unified Communications System 8.x SRND
16
AARNet Copyright 2011
Number Manipulation – Route Pattern
AARNet Copyright 2011
Number Manipulation – Translation Pattern
AARNet Copyright 2011
Number Manipulation – Route List Detail
AARNet Copyright 2011
SIP Trunking – CUCM 8.5
SIP trunks provide connectivity to other SIP devices such as gateways, SIP proxies,
applications, and other Unified CM clusters. Today, SIP is arguably the most commonly
chosen protocol when connecting to service providers and Unified Communications
applications. Cisco Unified CM 8.5 and later releases provide the following SIP trunk
and call routing enhancements:
• Can run on all Unified CM nodes
• Up to 16 destination IP addresses per trunk
• SIP OPTIONS ping keepalives
• SIP Early Offer support for voice and video calls (insert MTP if needed)
• QSIG over SIP
• SIP trunk normalization and transparency
• Supports the use of route lists on all Unified CM nodes
The SIP trunk features available in the current release of Unified CM make SIP the
preferred choice for new and existing trunk connections.
Source: Cisco Unified Communications System 8.x SRND
AARNet Copyright 2011
SIP Trunk Configuration – 8.0
AARNet Copyright 2011
SIP Trunk Configuration – 8.0 (continued)
AARNet Copyright 2011
SIP Trunk Security Profile
AARNet Copyright 2011
Delayed offer vs Early offer
• Delayed offer = NO SDP in original SIP INVITE
• Early offer = SDP included as part of original SIP INVITE
• With delayed offer, caller makes the final codec decision.
• With early offer, called makes the final codec decision.
• Prior to CUCM version 8.5, SIP trunk only supported delayed offer.
• AARNet’s experience with delayed offer was, issues when calling MCUs.
MCU’s support many codec’s. Therefore, the responding SIP/SDP body,
is very large and causes massive fragmentation issues. Signaling or
negotiation would often fail.
AARNet Copyright 2011
Delayed offer- trace
25
AARNet Copyright 2011
Early offer- trace
26
AARNet Copyright 2011
CUCM Early Offer enabled
Copy “Standard SIP Profile”
Standard SIP Profile  Standard SIP Profile- w early offer.
27
AARNet Copyright 2011
CUCM Early Offer enabled
<snip>
28
AARNet Copyright 2011
Thank you
29
Questions
?