Transcript 下載/瀏覽
Thermosensitive chitosan–Pluronic hydrogel as an injectable cell delivery carrier for cartilage regeneration Kyung Min Park a, Sang Young Lee b, Yoon Ki Joung a, Jae Sik Na c, Myung Chul Lee b, Ki Dong Park a,* Received 25 July 2008; received in revised form 6 January 2009; accepted 26 January 2009 Available online 4 February 2009 指導老師:林鴻儒 博士 姓名:徐楓茜 日期:98.09.29 Outline Introduction Materials and method Result and discussion Conclusion Introduction 軟骨的疾病,例如:骨關節炎,會使病人 感到疼痛,又因軟骨自我修復的能力差, 沒辦法根治。 近幾年利用合成的支架有兩種,1.天然材料, 2.合成與天然混合而成材料,皆廣泛的應用 於軟骨組織工程中,其中並利用細胞當作 媒介植覆於支架中,觀察其支架是否是一 個良好的材料。 近幾年利用常水膠來修補關節軟骨是因為, 水膠為3-D結構使細胞可以先在體外培養在 植覆於體內,因此水膠廣泛的應用於組織 工程中。 Pluronic + Succinic anhydride + DMAP + TEA CP Copolymer Dioxane Room temperature, 24h 0.01M PBS MP Stored 0-4℃ EDC + NHS + MES + HCl 30℃, 24h CP Copolymer In 37℃ oven allow gel Result and discussion Fig. 1. Synthesis of the CP copolymer by grafting monocarboxylated Pluronic F127 onto chitosan using EDC/NHS in 0.1M MES. Fig. 2. The hydrogel formation of the thermosensitive CP hydrogel in aqueous solution via the hydrophobic interaction of a PPO group in Pluronic and the dehydrated chitosan chain. Fig. 3. The swelling ratio and degradation behavior of the CP hydrogel in PBS buffer (0.01 M and pH 7.4) at 37 C with different polymer concentration (-e-, 16 wt.%; -h-, 18 wt.%; -4-, 20 wt.%). Fig. 5. The storage modulus (G0) and loss modulus (G00) of the 16 wt.% (a) and 20 wt.% (b) CP hydrogel in PBS buffer (0.01M and pH 7.4). A frequency of 0.1 Hz and a strain of 0.1% were applied. Fig. 4. SEM images of the surface morphology of the lyophilized CP hydrogel at different concentration: (a) 16 wt.%, (b) 18 wt.% and (c) 20 wt.%. Fig. 6. The chondrocyte proliferation MTS assay: alginate hydrogel (white bar) and the CP hydrogel (black bar), *P < 0.05. Fig. 7. Fluorescent microscopy images of bovine chondrocytes in the CP hydrogel: (a) after 1 day and (b) after 3 days; alginate hydrogel; (c) after 1 day and (d) after 3 days by Live/Dead assay. Fig. 8. Amount of GAG synthesized in the alginate hydrogel (white bar) and in the CP hydrogel (black bar) by DMB assay, *P < 0.05. Fig. 9. The gene expression of type II collagen and aggrecan of chondrocytes cultured in the CP and alginate hydrogels according to RT-PCR after 28 days, *P < 0.05. Table 1 Polymerase chain reaction primer sequences. Conclusion CP水膠改善了機械性質、穩定性及生物相 容性。 雖然CP水膠在25℃已為凝膠態,但轉變的 時間足夠的時間可注入超過25℃的目標位置。 CP水膠的軟骨細胞增生率比使用Alginate的 好。