Life is like riding a bicycle – in order to keep your balance, you must keep moving

Quick reference card for mounting the removable display for the torque sensor

Display unit to mount on the bike’s steering. Cable connector. Steer mounting kit. Cable connector. Plug the cable with the connector. Mounting the display on the mounting kit. First hook the front of the display on the mounting kit. Second, gently push the display down until it locks. To release the display, press on the marked point to release. Gently take the display from the mounting kit. Shinga BV | Molendijk Zuid 23B, 5482 WZ Schijndel | Nederland | Telefoon: +3185 401 2738 | Email: [email protected] | KVK.: 62140957 Quick reference card for mounting the display for torque sensor Aug 2016 V1.docx

Life is like riding a bicycle – in order to keep your balance, you must keep moving

You can tilt the display to your desired position. After mounting the display, the display should look like this.

For your information:

Gently releasing the cable is not harmfull for the elektronic system and will not lead to resetting the settings. Shinga BV | Molendijk Zuid 23B, 5482 WZ Schijndel | Nederland | Telefoon: +3185 401 2738 | Email: [email protected] | KVK.: 62140957 Quick reference card for mounting the display for torque sensor Aug 2016 V1.docx