P1 Chapters 1-3 Revision Key points
Download
Report
Transcript P1 Chapters 1-3 Revision Key points
P1 Chapter 1 Energy Transfer by
Heating
1.1 INFRARED RADIATION
1.2 SURFACES AND RADIATION
1.3 STATES OF MATTER
1.4 CONDUCTION
1.5 CONVECTION
1.6 EVAPORATION AND CONDENSATION
1.7 ENERGY TRANSFER BY DESIGN
1.8 SPECIFIC HEAT CAPACITY
1.9 HEATING AND INSULATING BUILDINGS
1.1 Infrared Radiation
Key Points
Infrared radiation is energy transfer by electromagnetic waves
All objects emit infrared radiation
The hotter an object is the more infrared radiation it emits in a
given time
Remember that transfer of energy by infrared
radiation does not involve particles
Q1 – How does the temperature of an object affect the
rate at which it emits infrared radiation?
Q2 – What is a vacuum?
1.2 Surfaces and Radiation
Key Points
Dark, matt surfaces emit infrared radiation more quickly than
light shiny surfaces
Dark, matt surfaces absorb infrared radiation more quickly
than light shiny surfaces
light shiny surfaces reflect more infrared radiation then dark,
matt surfaces
Q1 – Why are houses in hot countries often painted
white?
Q2 – Why are the pipes on the back of a fridge usually
painted black?
1.3 States of Matter
Key Points
Flow, shape and volume are the properties used to describe
each state of matter
The particles in a solid are held next to one another, vibrating
in fixed positions
The particles in a liquid move about at random and are in
contact with each other
The particles in a gas move about randomly and are much
farther apart than particles in a liquid or a solid
Make sure you can describe the arrangements.
Highers you need to be able to talk about the forces
of attraction between the particles!
1.4 Conduction
Key Points
Metals are the best conductors
Materials such as wool and fibreglass are good insulators.
Conduction in a metal is mainly due to free electrons
transferring energy inside the metal
Non-metals are poor conductors because they do not contain
free electrons.
Know some examples of insulators and how they are
used
1.5 Convection
Key Points
Convection is the circulation of fluid (liquid or gas) caused by
heating it
Convection takes place only in liquids or gases.
Heating a liquid makes it less dense so it rises and causes
circulation
Remember that convection cannot occur in solids
Make sure you can explain how convection currents
are set up, in terms of changes in density when a
fluid is heated
Q – Why does a fluid become less dense when heated?
1.6 Evaporation and Condensation
Key Points
Evaporation is when a liquid turns into a gas
Condensation is when a gas turns into a liquid
Make sure you know the factors that affect the rate of
evaporation and condensation
Q1 – What effect would decreasing the surface area of
a liquid have on its rate of evaporation?
Q2 – What effect would decreasing the surface area of
a liquid have on its rate of condensation?
1.7 Energy transfer by design
Key Points
The rate of energy transfer to or from an object depends on:
The shape, size and type of material
The materials the object is in contact with
The temperature difference between the object and the
surroundings
Be prepared to apply your knowledge of energy
transfer to different situations. These might include
animal adaptations to hot or cold climates
1.8 Specific heat capacity
Key Points
The greater the mass of an object, the more slowly its
temperature increases when it is heated
The rate of temperature change in a substance when heated
depends on the energy transferred to it, its mass and its
specific heat capacity
E=mxcxθ
Q – The specific heat capacity of oil is 2100 J/kgoC.
How much energy is needed to raise the temperature
of 1kg of oil by 1oC?
1.9 Heating and insulating buildings
Key Points
The rate of energy transfer to or from our homes can be
reduced
U-values tell us how much energy per second passes through
different materials. The lower the U-value the better the
insulator
Solar panels do not use fuel to heat water but they are
expensive to buy and install
P1 Chapter 2 Using Energy
2.1 FORMS OF ENERGY
2.2 CONSERVATION OF ENERGY
2.3 USEFUL ENERGY
2.4 ENERGY AND EFFICIENCY
2.1 Forms of energy
Key Points
Energy exists in different forms
Energy can be transformed from one form into another
When an object falls and gains speed, its gravitational potential
energy decreases and its kinetic energy increases
Make sure you are familiar with different forms that
energy can take and know some examples of each of
them!
Q1 – What form of energy does a compressed spring have?
Q2 – Where does the chemical energy stored in your
muscles come from?
2.2 Conservation of energy
Key Points
Energy can be transformed from one form to another, or one place or
another
Energy cannot be created or destroyed
Conservation of energy applies to all energy changes
Conservation of energy is an extremely important idea in
physics, so it will often come up in exam questions!
Q1 – What energy transfers take place when you turn on a
torch?
Q2 – In terms of energy, what happens when you burn a
fuel?
2.3Useful energy
Key Points
Useful energy is energy in the place we want it and the form we need
it.
Wasted energy is energy that is not useful energy.
Useful energy and wasted energy both end up being transferred to
the surroundings, which become warmer
As energy spreads out, it gets more difficult to use for further energy
transfers
Q1 – What happens to the wasted energy from a light bulb?
Q2 – Why should we talk about energy being ‘wasted’ not
energy being ‘lost’.
2.4 Energy and efficiency
Key Points
The efficiency of an appliance = useful energy transferred by the
appliance ÷ total energy supplied to the appliance (x100%)
No machine can be more than 100% efficient
Measures to make machines more efficient include reducing:
Friction
Air resistance
Electrical resistance
Noise due to vibrations
Q1 – In a light bulb, for every 25 joules of energy that are
supplied to the bulb, 5 joules are transferred into light
energy. What is the efficiency of the bulb?
Q2 – A machine is adjusted so that it wastes less energy
because of friction. What happens to the efficiency of the
machine?
P1 Chapter 3 Electrical energy
3.1 ELECTRICAL APPLIANCES
3.2 ELECTRICAL POWER
3.3 USING ELECTRICAL ENERGY
3.4 COST EFFECTIVENESS MATTERS
3.1 Electrical appliances
Key Points
Electrical appliances can transfer useful energy
Uses include heating, lighting, making objects move
An electrical appliance is designed for a particular purpose and
should waste as little energy as possible
Make sure you are confident with your energy
transfers!
Q – What useful energy transfers take place in an
electric drill?
3.2 Electrical power
Key Points
Power is the rate of transfer of energy
P = E/t
Efficiency = useful power out/total power in (x 100%)
Practise using the equation!
Q1 – How many watts are equivalent to 12 kilowatts?
Q2 – An electric motor transfers 48kJ of electrical
energy into kinetic energy in 2 minutes. What is the
useful power output of the motor?
3.3 Using electrical energy
Key Points
The kilowatt-hour is energy supplied to a 1kW appliance in 1
hour
E=Pxt
Total cost = number of kWh x cost per kWh
Remember that the kilowatt-hour is a unit of energy
Q – How much electrical energy, in kWh, is
transferred when a 9kW shower is used for 15
minutes?
3.4 Cost effectiveness
Key Points
Cost effectiveness means getting the best value for money
To compare the cost effectiveness of different appliances, we
need to take into account a number of different costs.
Make sure you can work out the payback time for
different appliances or methods of insulation!
Payback time = initial cost/savings per year
Q – Loft insulation costs £600 including installation.
It saves £80 per year on the fuel bill. How long is the
payback time?