Transcript 21-06-0813-01-0000-LB1a-handover-big-picture.ppt

• IEEE 802.21 MEDIA INDEPENDENT HANDOVER
• DCN:21-06-0813-01-0000-LB1a-handover-big-picture.ppt
• Title: LB 1a, Handover example flow with MIP
• Date Submitted: November, 2006
• Presented at IEEE 802.21 session #NN in Dallas, TX
• Authors or Source(s): Srinivas Sreemanthula
• Abstract: Study interactions with MIP
21-05-0813-01-0000
IEEE 802.21 presentation release statements
• This
document has been prepared to assist the IEEE 802.21 Working Group. It
is offered as a basis for discussion and is not binding on the contributing
•
•
individual(s) or organization(s). The material in this document is subject to
change in form and content after further study. The contributor(s) reserve(s)
the right to add, amend or withdraw material contained herein.
The contributor grants a free, irrevocable license to the IEEE to incorporate
material contained in this contribution, and any modifications thereof, in the
creation of an IEEE Standards publication; to copyright in the IEEE’s name
any IEEE Standards publication even though it may include portions of this
contribution; and at the IEEE’s sole discretion to permit others to reproduce in
whole or in part the resulting IEEE Standards publication. The contributor also
acknowledges and accepts that this contribution may be made public by IEEE
802.21.
The contributor is familiar with IEEE patent policy, as outlined in Section 6.3
of
the
IEEE-SA
Standards
Board
Operations
Manual
<http://standards.ieee.org/guides/opman/sect6.html#6.3>
and
in
Understanding Patent Issues During IEEE Standards Development
http://standards.ieee.org/board/pat/guide.html>
21-05-0813-01-0000
Motivation
• An example to capture current understanding of MIH
interworking with IP mobility signaling
• Intent is to utilize the flow for following purposes, to identify
• Any superfluous or mandatory functionality (that lead to
inefficiency)
• Any missing functionality that is required
• How do we deal with superfluous functionality?
• May be there are other IP mobility mechanisms that may find
it useful
• But, mechanisms that already has this functionality should not
be forced to use it
• Logical approach is to make them optional for efficient
interworking related to known mobility mechanisms
• Two flows are shown a) MN Initiated b) Network Initiated
21-05-0813-01-0000
a1)
Mobile Node
MN Initiated-I
MIH
User
MIH
F
Serving Network
MAC-1
MAC-2
Serving
POS
POA-S
MIH
User
Candidate Network 1
MIIS
Server
POAC1
Candidate
POS1
MIH
User
Candidate Access
Network 2
POAC2
Candidate
POS2
MIH
User
Traffic Flow between MN and Serving Network
Link_Parameters_Report.IND
MIH_Handover_Initiate.REQ
MIH_Handover_Initiate.IND
MIH_Handover_Prepare.REQ
MIH_Handover_Prepare.REQ
MIH_Handover_Prepare.REQ
MIH_Handover_Prepare.IND MIH_Handover_Prepare.IND
MIH_Handover_Prepare.RESP MIH_Handover_Prepare.RESPMIH_Handover_Prepare.RESP
MIH_Handover_Prepare.RESP
MIH_Handover_Prepare.CFM
MIH_Handover_Initiate.RESP
MIH_Handover_Initiate.RESP
MIH_Handover_Initiate.CFM
MIP_Proxy_Router_Adv
Decision
Results
in FBU
MIP_Fast_BU
?
MIP_Handover_initiate.REQ
Replace with
MIH_Handover_Commit.REQ
MIH_Handover_Commit.REQ
MIH_Handover_Commit.IND
MIH_Handover_Commit.RESP
MIH_Handover_Commit.RESP
MIP_Handover_initiate.ACK
MIH_Handover_Commit.CFM
21-05-0813-01-0000
This can be
optional since there
is equivalent
* Commit can be possibly be done after link establishment in target. mobility signaling
a2)
Mobile Node
MN Initiated-II
MIH
User
MIH
F
MAC-1
Serving Network
MAC-2
“Link-Connect”
Serving
POS
POA-S
MIH
User
MIP_Fast_BAck
Candidate Network 1
MIIS
Server
POAC1
Candidate
POS1
MIH
User
Candidate Access
Network 2
POAC2
Candidate
POS2
MIH
User
MIP_Fast_BAck
Link Establishment
MIH_Link_Up
MIH_Link_Up
Tunnel Packets
MIP_Fast_BU
Forward Packets
Replace with
?
MIP_Fast_BU
MIH_Handover_Complete.REQ
MIH_Handover_Complete.REQ
MIH_Handover_Complete.IND
MIH_Handover_Complete.REQ
MIH_Handover_Complete.REQ
MIH_Handover_Complete.IND
MIH_Handover_Complete.RESP
MIH_Handover_Complete.RESP
MIH_Handover_Complete.CFM
MIH_Handover_Complete.RESP
MIH_Handover_Complete.RESP
MIH_Handover_Complete.CFM
21-05-0813-01-0000
This can be
optional since there
is equivalent
mobility signaling
b1)
Mobile Node
NET Initiated-I
MIH
User
MIH
F
MAC-1
Serving Network
MAC-2
Serving
POS
POA-S
MIH
User
Candidate Network 1
MIIS
Server
POAC1
Candidate
POS1
MIH
User
Candidate Access
Network 2
POAC2
Candidate
POS2
MIH
User
Traffic Flow between MN and Serving Network
Link_Parameters_Report.IND
MIH_Link_Parameters_Report.IND
MIH_Link_Parameters_Report.IND
MIH_Handover_Initiate.REQ MIH_Handover_Initiate.REQ
MIH_Handover_Initiate.IND
MIH_Handover_Initiate.RESP
MIH_Handover_Initiate.RESP
MIH_Handover_Initiate.CFM
MIH_Handover_Prepare.REQ
MIH_Handover_Prepare.REQ
MIH_Handover_Prepare.REQ
MIH_Handover_Prepare.IND
MIH_Handover_Prepare.IND
MIH_Handover_Prepare.RESP MIH_Handover_Prepare.RESP MIH_Handover_Prepare.RESP
MIH_Handover_Prepare.RESP
MIH_Handover_Prepare.CFM
MIP_Proxy_Router_Adv
MIH_Handover_Commit.REQ
MIH_Handover_Commit.REQ
MIH_Handover_Commit.IND
MIP_Fast_BU
MIH_Handover_Commit.RESP
MIH_Handover_Commit.RESP
MIP_Handover_initiate.REQ
MIP_Handover_initiate.ACK
MIH_Handover_Commit.CFM
21-05-0813-01-0000
* In this case, Handover commit is useful since Proxy-Adv cannot serve as a commit
b2)
Mobile Node
NET Initiated-II
MIH
User
MIH
F
Serving Network
MAC-1
MAC-2
“Link-Connect”
Serving
POS
POA-S
MIH
User
MIP_Fast_BAck
Candidate Network 1
MIIS
Server
POAC1
Candidate
POS1
MIH
User
Candidate Access
Network 2
POAC2
Candidate
POS2
MIH
User
MIP_Fast_BAck
Link Establishment
MIH_Link_Up
MIH_Link_Up
Forward Packets
MIP_Fast_BU
Tunnel Packets
MIP_Fast_BU
Replace with
?
This can be
optional since there
is equivalent
mobility signaling
MIH_Handover_Complete.REQ
MIH_Handover_Complete.REQ
MIH_Handover_Complete.IND
MIH_Handover_Complete.REQ
MIH_Handover_Complete.REQ
MIH_Handover_Complete.IND
MIH_Handover_Complete.RESP
MIH_Handover_Complete.RESP
MIH_Handover_Complete.CFM
MIH_Handover_Complete.RESP
MIH_Handover_Complete.RESP
MIH_Handover_Complete.CFM
21-05-0813-01-0000
Conclusion
• Some remote MIH HO command signaling can be optimized with
use of the necessary MIP signaling by generating local events
from MIP (MIH-User) to MIHF
• Considering this optimization is MIP specific, the use of these
MIH commands can be made optional
• Events or notifications from MIH-User to MIHF is missing,
adding this to the MIH functionality is useful
21-05-0813-01-0000