Transcript LabVIEW Embedded Module for ARM Microcontrollers

LabVIEW Embedded Module for
ARM Microcontrollers
•
•
•
•
•
•
•
•
•
•
•
•
The NI LabVIEW Embedded Module for ARM Microcontrollers
offers a comprehensive graphical environment for programming
the world's most popular embedded 32-bit RISC processor. Jointly
developed by NI and ARM, the software seamlessly integrates
LabVIEW embedded technology and the ARM RealView
development environment to provide an out-of-the-box embedded
programming experience for targeting ARM7 and ARM9 family and
Cortex-M3 microcontrollers.
Package Contents
-LabVIEW
- LabVIEW Embedded Module for ARM Microcontrollers
- RealView Microcontroller Development Kit (MDK)
- Keil ULINK2 USB-JTAG Adapter
- Development Board
- Getting Started with the Embedded Module for ARM
Micocontrollers
제품 구매정보
http://sine.ni.com/nips/cds/view/p/lang/ko/nid/205040
평가 소프트웨어 다운로드
http://joule.ni.com/nidu/cds/view/p/id/1371/lang/ko
더 많은 정보 알아보기
http://www.ni.com/labview/arm/ko/
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Luminary Micro LM3S8962
Evaluation Board
Microcontroller Manufacturer: Luminary Micro
Evaluation Board Manufacturer: Luminary Micro
Processor Type: ARM Cortex-M3 LM3S8962
Evaluation Board features:
1 CAN interface
SD Card interface
OLED graphics display with 128 x 96 pixel resolution
User LED, navigation switches, and select pushbuttons
Ethernet
Analog Input
Processor Specifications:
256KB Flash ROM
64KB SRAM
50MHz
6 Motion Control PWM
Ethernet MAC + PHY
1 CAN
1 UART
8 10-bit ADC
1 Analog Comparator
38 GPIO Pins
Related LM3S8962 Links
Evaluation Board Information http://www.ti.com/tool/ek-lm3s8962
Processor Overview http://www.keil.com/dd/chip/4285.htm
Full Processor Specifications http://www.keil.com/dd/docs/datashts/luminary/lm3s8962.pdf
Keil MCB2300 Evaluation Board
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Microcontroller Manufacturer: NXP
Evaluation Board Manufacturer: Keil
Processor Type: ARM7 NXP LPC2378
Evaluation Board features:
2 Serial interfaces
Speaker
Analog Input (via potentiometer)
2 CAN interfaces
LCD
USB
Ethernet
8 LEDs
Processor Specifications:
512KB on-chip Flash ROM
58KB RAM
CPU clock up to 72 MHz
Ethernet 10/100 MAC with DMA
External Memory Controller for static devices such as Flash and SRAM
USB 2.0 Full Speed Device Controller
CAN 2.0B with two channels
4 UARTs
3 I2C serial interfaces
3 SPI/SSP serial interfaces
SD/MMC memory-card interface
10-bit ADC with 8 channels
10-bit DAC
PWM unit for three-phase motor control
General purpose I/O pins
Related MCB2300 Links
Evaluation Board Information http://www.keil.com/mcb2300/
Processor Overview http://www.keil.com/dd/chip/4153.htm
Full Processor Specifications http://www.keil.com/dd/docs/datashts/philips/lpc2378_ds.pdf
LabVIEW를 이용한 ARM 마이크로컨트롤러 제어
• LabVIEW 환경에서 ARM 마이크
로 컨트롤러 제어
• ARM7, ARM9, Cortex-M3 마이
크로 컨트롤러에 사용가능
• Luminary Micro, NXP 평가보드
의 Ethernet, CAN, SD Card,
Display, Analog Input/ Output,
GPIO, LED, UART 등을
LabVIEW 함수로 제어
• 기본적인 LabVIEW 프로그램에
대한 지식을 갖고, 직접 하드웨
어 레벨의 ARM 마이크로 컨트
롤러를 제어할 수 있게 함