Transcript Document 7928452

INDEX
•
•
•
•
•
•
•
•
•
•
•
•
WELCOME DISPLAY
DEFAULT DISPLAY
MAIN DISPLAY
SYSTEM LAYOUT – P105 to P104
SYSTEM LAYOUT – P109 to P106
ROOMS P-109 to P-104 DISPLAY
CHANGE SET POINTS
MAIN DATA TRENDING
TEMP. DATA TRENDING
HUM. DATA TRENDING
ALARMS
A/C UNIT CONTROL
WELCOME DISPLAY
Touch this button to shutdown
current application and access
panel view configuration
settings.
Touch any of these buttons to go
to the project of your preference.
DEFAULT DISPLAY
Touch this button to shutdown
current application and
access panel view
configuration settings.
If this message is shown it
means that one of the rooms’
alarm has been activated.
(Refer to ALARMS button)
Indicates User. Default is shown
when nobody is logged in.
Touch this button to go back to
Welcome Screen
This is the first display that it’s shown
when you choose our project on the
welcome screen. You have to Login to be
able to access the other displays.
Project Website
Touch this button to Login.
There are 3 types of accounts:
Login Banner.
Indicates you have to use Login Button to
be able to access the other displays.
•Administrator
•Power User
•Guest
MAIN DISPLAY
Touch this button to shutdown
current application and
access panel view
configuration settings.
Indicates User.
Default is shown when
nobody is logged in.
If this message is shown it
means that one of the rooms’
alarm has been activated.
(Refer to ALARMS button)
These buttons are shown once the user logs in. They
allow access into other displays or to change the
current user’s password is admin is logged on.
SYSTEM LAYOUT
These buttons allow the
Administrator or Power
User to change the status
of the system in each
room.
Touching the layout allows
user to go directly to the
corresponding system
layout.
Indicates room actual temperature
and humidity reading.
These buttons allow to
visit the room shown and
layout for others rooms.
Key shows how each component
works.
Touch these buttons to display the
respective page. Administrator is the
only user with access to the Change
Set Point Display and A/C Unit
Control.
Touch these buttons to login or
logout user.
SYSTEM LAYOUT
These buttons allow the
Administrator or Power
User to change the status
of the system in each
room.
Touching the layout allows
user to go directly to the
corresponding system
layout.
Indicates room actual temperature
and humidity reading.
These buttons allow to
visit the room shown and
layout for others rooms.
Key shows how each component
works.
Touch these buttons to display the
respective page. Administrator is the
only user with access to the Change
Set Point Display and A/C Unit
Control.
Touch these buttons to login or
logout user.
ROOMS P-109 to P-104 DISPLAY
Lets user know in what room display he is in.
Shows room actual
temperature and
humidity reading
with their
respective set
points.
If this message
is shown it
means that the
room’s alarm is
activated.
Touch this button to
go to the Renewable
Energy project.
Administrator can
click on top of this
area and it will
direct him to the
Change Set Point
Display.
The layout shows
what’s happening
in that room.
Allows user to go
directly to the
system layout.
This button
allows
Administrator or
Power User to
turn ON/OFF
the room lights
when system is
in Remote.
Touch these buttons to display the
respective page. Administrator is the
only user with access to the Change
Set Point Display and A/C Unit
Control.
These buttons allow the
Administrator or Power
User to change the
status of the system.
Also indicates actual
operator
Touch these buttons to login or
logout user.
CHANGE SET POINTS
This table shows
week and
weekends
Temperature &
Humidity Set
Points for the
different rooms.
Administrator can
enter the new Set
Point.
NOTE:
Administrator is
the only user with
access to change
data in this
display.
Shows Temperature
& Humidity
recommended set
point values.
Touch this button
to restore default
set point values.
If this message
is shown it
means that the
room’s alarm is
activated.
Touch these buttons to display the respective page.
Administrator is the only user with access to the Change
Set Point Display and A/C Unit Control.
Touch these buttons to login or
logout user.
MAIN DATA TRENDING
Touch any of
these buttons
to observe the
temperature
or humidity
data trending.
If this message
is shown, it
means that a
room alarm is
activated.
Touch these buttons to display the respective page.
Administrator is the only user with access to the Change
Set Point Display and A/C Unit Control.
Touch these buttons to login or
logout user.
TEMP. DATA TRENDING
Trends Temperature
Values.
It shows all the
history of the
Trending.
If this message
is shown, it
means that a
room alarm is
activated.
Touch this button to
go back to main
Touch these buttons to display the respective page.
Administrator is the only user with access to the Change
Set Point Display and A/C Unit Control.
Touch these buttons to login or
logout user.
HUM. DATA TRENDING
Trends Temperature
Values.
It shows all the
history of the
Trending.
If this message
is shown, it
means that a
room alarm is
activated.
Touch this button to
go back to main.
Touch these buttons to display the respective page.
Administrator is the only user with access to the Change
Set Point Display and A/C Unit Control.
Touch these buttons to login or
logout user.
ALARMS
These buttons allow the
Administrator or Power
User to change the status
of the system.
Allows to have more
visibility of the system.
Touch these buttons to
display the respective
room page.
This button stops
blinking the alarm,
but doesn’t resolve it.
Shows Alarms
Summary. Actual
Alarms are the ones
blinking red and
yellow.
This button let you
sort the way to see
the alarms.
Touch these buttons to display the
respective page. Administrator is the only
user with access to the Change Set Point
Display.
Touch these buttons to
login or logout user.
A/C UNIT CONTROL
These buttons
allows the
Administrator to
change the status
of the system.
Allows to have more
visibility of the system.
Touch these buttons to
display the respective
room page.
These buttons let
control the
Variable
Frequency Drive.
This button allows
Administrator turn
ON/OFF the A/C unit
in rooms P-109
through P-106. The
four rooms needs to
be in Remote Mode.
Touch these buttons to display the
respective page. Administrator is
the only user with access to the
Change Set Point Display.
Indicates if the a/c is ON/OFF.
YELLOW = ON, WHITE = OFF
Touch these buttons
to login or logout user.