Transcript Update primary numbers active part amdb_simrec.r.02.02: Difference with amdb_simrec.r.01.01 (ATL-CSC-01-00-00)

Update primary numbers
active part
Is the name really 02.02 ?
I lost release 02.01

amdb_simrec.r.02.02:

Difference with amdb_simrec.r.01.01 (ATL-CSC-01-00-00)

new 1 BIM with HV <-> RO inverted

new 6 BIR with HV <-> RO inverted + correction 75mm

BIS8 bad positioning

BML sector 13 add hole corresponding to elevator place12345 -> 12367

BOG bad positioning

BMF1,BMF2,BMF3 LB2->LB1

BOG1,BOG2,BOG4,BOG5 RPC size W PRC8, RPC17

BOS2,BOS3,BOF1->BOF8 1868->1853 (+3mm? should be checked)

BOS1 asymmetric CMI +803mm
Update primary numbers
dead matter part
Maybe
02-01 was the version with only updates to active
geometry compared to 01.01 ?

amdb_simrec.r.02.02:

saddle

Forward MDT support

Forward TGC support ?

Feet struts

ID patch panel 2

MDT BOL support

Tie rod

S13 passerel

Passerels
in GeoModel
R14 probable
> R14
amdb_simrec.r.01.01
amdb_simrec.r.02.02
Feet struts
Detector description parameters chain: present situation
Primary numbers
AMDB
Oracle
GeoModel
G4
Active part
Dead Matter
automatic-translation
Reconstruction
24/05/2016
5
Work...

validation of new set of primary numbers


simulation
No body working on this!

reconstruction
No body working on this!
Graphical tool to debug GeoModel (find automatically clashes)


converter GeoModel Object to XML file to use Persint clashes tool
O.Fedin 10%
Simulation in the spectrometer (avoid G4 clashes):

G4 expert to test boolean + brep's: time consuming + physics

Converter Primary numbers to GeoModel on fly:



No body working on this!
easy dead matter update
present solution is a dead end
need to have somebody to check the objects weight in GeoModel/G4 w.r.t the reality
No body working on this!

ex: barrel coil in reality~90 tons and in G4?

Tomograph informations to Primary Numbers

Geometers' informations:

T.Nikitina 10%
P.Schune 10%
Nobody working on this!
absolutely needed for alignment and magnetic field reconstruction!
Active part: MuonGeoModel updates and
plans for 14.x.x
Provide XxxDetectorElements with granularity of Data Collections


allows muon code optimization (mainly timing in data access !) useful not critical

big project (but details of the implementation are under control):


XxxDetectorElements inherit from the TrkDetElementBase ( provide all generic tracking interfaces
+ technology specific methods)

hold short arrays of “current” XxxReadoutElements and delegate to them the real work
the plan: deliver the functionality for 14.0.0 in MuonGeoModel, while keeping existing
interfaces for clients

Realistic effects: A/B-lines, wire sag


need to be there for real data
B-lines:

handled in the new convention (Sept 2007) in 13.x.0

physical validation (against AMDC implementation) to come for

provide access to deformation parameters from the cond. DB for FDR2
FDR2

A-lines prove to be able to read them from COOL in simulation – hopefully in a few days

wire sag is already addressed on the side of MuonGeoModel + MuonDigitization

some design optimization is possible – not critical – can come after release 14
Active part: MuonGeoModel updates and
plans for 14.x.x
Clashes in the active, active-dead sector


clashes seem not to be a major problem now:


the usual few (!) known do not cause job crashes – at current default simulation parameters
automatic cutouts still to be introduced not critical
No defined time scale yet
Validation


Check-fix small inconsistencies of active sector in MuonGeoModel vs Amdc
 not
critical (~10 microns)
Memory vs cpu-time


caching can be turned on/off - cache can be built at initialization already in 13.2.0
Range Checks



methods to check validity of identifiers based on the detector element they are
associated with already in 13.2.0
used in MuonXxxRdoToPrepData (Xxx = Mdt, Rpc, Csc) already in 13.2.0

identifiers (from rdo decoding / cabling) inconsistent with geometry layout do not produce prd
Man Power (1)


Primary numbers update

nobody: Tomograph data

LC
Software to update Oracle DB : Active part


Software to update Oracle DB : Dead matter part


A.Barashkou
Validation Primary numbers to Oracle / GeoModel: Active part


S.Spagnolo, V.Tsulaia
GeoModel Dead matter part


JF.Laporte,A.Barashkou,LC
GeoModel Active part


JF.Laporte,V.Tsulaia
JF.Laporte & S.Spagnolo
Validation Primary numbers to GeoModel/G4: Dead matter part

nobody:

Global validation G4

Global validation reconstruction
24/05/2016
9
Man Power (3)
Today

A.Barashkou
30 %

JF.Laporte
10 %

S.Spagnolo
30 %

V.Tsulaia

L.Chevalier
5 %
25 %
Total FTE : 1.00 !!!!
~50 000 parameters
~7000 m2 chambers
~1000 tons of dead matter
24/05/2016
10
Summary

Release 14


update amdb active part

Station position corrections from the drawings

A lines will correct these numbers (even it is the huge correction ~10mm)
missing big dead matter parts:


saddle , MDT supports, Tie rod, pp2 (only 1 over 12)

already in amdb need to put in GeoModel

Proceeds through the “old” way for R14: dead end

Automatic xml  GeoModel converter is mandatory
missing big dead matter part not yet in amdb:


Permanent MDT chamber construction defects not yet before R15


16 vacuum pumps, brackets, eta=0 services, passerel support,
From Tomograph and cosmics analysis
need to have somebody to check the objects weight in GeoModel/G4 w.r.t the
reality

ex: barrel coil in reality~90 tons and in G4?
Summary

Release 14

1/ update amdb active part


2/ missing big dead matter parts:



saddle , MDT supports, Tie rod, pp2 (only 1 over 12)

already in amdb need to put in GeoModel

Proceeds through the “old” way for R14

Automatic xml  GeoModel converter for R15
missing big dead matter part NOT yet in amdb:

TGC supports, eta=0 services, return flux disk: A rough model which can account for the total amount
of matter can be provided for R14

MDT barrel chamber support brackets, vacuum pump: R15
3/ Permanent MDT chamber construction defects not yet before R15


Station position corrections from the drawings (completed in the next days)
From Tomograph and cosmics analysis
Remarks: need to have somebody to check the objects weight in GeoModel/G4 w.r.t the
reality

ex: barrel coil in reality~90 tons and in G4?
Wrong place in GeoModel/G4
Good place in Primary numbers
24/05/2016
14
24/05/2016
15
Backup slides
24/05/2016
16
24/05/2016
17