Transcript Document 7476333

Chapter 19:
Network Management
Business Data Communications, 4e
Network Management
Requirements
Fault Management
Accounting Management
Configuration and Name Management
Performance Management
Security Management
Business Data Communications, 4e
2
Fault Management
A fault is an abnormal condition that requires
management attention (or action) to repair
Fault is usually indicated by failure to operate
correctly or by excessive errors
Users expect quick and reliable resolution
Business Data Communications, 4e
3
Responding to Faults
When faults occur, it is critical to quickly:
Determine exactly where the fault is
Isolate the rest of the network from the failure so that it
can continue to function without interference
Reconfigure or modify the network to minimize the effect
of removing the failed component(s)
Repair or replace the failed components to restore the
network to its initial state
Business Data Communications, 4e
4
Accounting Management
Reasons for accounting management:
Internal chargebacks on network use
User(s) may be abusing access privileges and burdening
the network at the expense of other users
Users may be making inefficient use of the network, and
the network
The network manager is in a better position to plan for
network growth if user activity is known in sufficient
detail.
Business Data Communications, 4e
5
Configuration Management
Concerned with:
initializing a network and grace-fully shutting down part
or all of the network
maintaining, adding, and updating the relationships
among components and the status of components
themselves during network operation
Business Data Communications, 4e
6
Performance Management
Issues of concern to the network manager include:
What is the level of capacity utilization?
Is there excessive traffic?
Has throughput been reduced to unacceptable levels?
Are there bottlenecks?
Is response time increasing?
Network managers need performance statistics to
help them plan, manage, and maintain large
Business Data Communications, 4e
networks
7
Security Management
Concerned with
generating, distributing, and storing encryption keys
monitoring and controlling access to networks
access to all or part of the network management
information
collection, storage, and examination of audit records and
security logs
Business Data Communications, 4e
8
Network Management Systems
Collection of tools for network monitoring and
control, integrated in these ways:
A single user-friendly operator interface for performing
most or all network management tasks
A minimal amount of separate equipment
consists of incremental hardware and software
additions implemented among existing network
components
Business Data Communications, 4e
9
Network Management System Architecture
Business Data Communications, 4e
10
Components of the NMS
All nodes run the Network Management Entity
(NME) software
Network control host or manager runs the Network
Management Application (NMA)
Other nodes are considered agents
Business Data Communications, 4e
11
Network Management Entity
Collection of software contained in each network
node, devoted to the network management task
Performs the following tasks:
Collect statistics on communications and network-related
activities.
Store statistics locally
Respond to commands from the network control center
Send messages to NCC when local conditions undergo a
significant change
Business Data Communications, 4e
12
IBM Network Management
Architecture and NetView
Associated with IBM’s Systems Network
Architecture (SNA)
IBM wants to provide the single, unifying
framework into which all other network
management products feed and from which all the
equipment in a user’s network can be controlled
Business Data Communications, 4e
13
Network Management Categories
SNA network management is composed of:
Problem management
Change management
Configuration management
Performance and accounting management
Business Data Communications, 4e
14
Problem Management
Problem determination
Problem diagnosis
Problem bypass and recovery
Problem resolution
Problem tracking and control
Business Data Communications, 4e
15
Change Management
Software change control
Microcode change control
Hardware change control
Business Data Communications, 4e
16
Configuration Management
Physical/logical resource identification
Resource relationship identification
Business Data Communications, 4e
17
Performance & Accounting
Management
Response-time monitoring
Availability monitoring
Utilization monitoring
Component delay monitoring
Performance tuning
Performance tracking and control
Accounting
Business Data Communications, 4e
18
NetView Software
 Control facility
 Status monitor
 Provides the capability to
operate the network.
 Hardware monitor
 collects notifications of failures
or significant events
 Session monitor
 Collects session-related
information on logical
components of the network;
includes measurements of data
on response time, session failure
 Displays status information;
reactivates network resources
following failures
 Help facilities
 Descriptions of fields on
displays, and a systematic
problem-solving facility
 Customization facilities:
 Permits a user to tailor NetView
Business Data Communications, 4e
19
Technical Control
Automatic and remote testing and monitoring of the
system, to reduce downtime due to the need to locate
service personnel
Restoring and/or reconfiguring the system upon
failure in real time
Providing network performance and functioning
statistics to facilitate planning and management for
high availability
Business Data Communications, 4e
20
Component-Level Technical
Control
Line Monitors
Captures the signal between a host system and the
network
Generally employed only on the network end
Protocol Analyzers
Can also simulate various network components
Can test communication protocols and codes
Typically handles up to layer 3 of the OSI architecture
Business Data Communications, 4e
21
Network Technical Control Systems
 Integrate control devices and centralize the control of the network
Business Data Communications, 4e
22
Performance Monitoring
After availability, the second most important
characteristic of a network is performance
Performance data must be available in sufficient
detail to be able to assess the bottleneck that is
causing the problem and to plan appropriate
remedial action
Business Data Communications, 4e
23
Component-Level Monitoring
Response-time monitors
Measures, displays, and records response time of each
transaction and the average response time
Hardware monitors
Events: Number of occurrences of specific events
Timing: Timing the duration of a specific signal
Software monitors
Gathers and reports statistics on hardware and systems
and applications software activity
Business Data Communications, 4e
24
Network Monitoring Systems
Business Data Communications, 4e
25
Indicators Reported by
Network Monitors
Service Parameters
Availability
Response Time
Accuracy and Integrity
Efficiency Parameters
Througput
Polling
Utilization
Business Data Communications, 4e
26
Simple Network Management
Protocol (SNMP)
Network Management Model
Management station
Management agent
Management information base
Network management protocol
Business Data Communications, 4e
27
Role of SNMP
Business Data Communications, 4e
28
Protocol Specification
Transmission of a message
Receipt of a message
Variable bindings
Business Data Communications, 4e
29
SNMPv2
Released in 1992, revised in 1996
Addressed functional deficiencies in SNMP
Accommodates decentralized network management
Improves efficiency of data transfer
Business Data Communications, 4e
30
SNMPv3
Released in 1998, addressed security deficiencies in
SNMP and SNMPv2
Does not provide a complete SNMP capability;
defines an overall SNMP architecture and a set of
security capabilities for use with SNMPv2
Provides three important services: authentication,
privacy, and access control
Business Data Communications, 4e
31