MSDS - ADA Flexitank

Download Report

Transcript MSDS - ADA Flexitank

MATERIAL SAFETY DATA SHEET
SECTION 1
PRODUCT AND COMPANY IDENTIFICATION
PRODUCT
Product Name
Product Description
Capacity
Intended use
:
:
:
:
COMPANY IDENTIFICATION
Supplier
:
ADA Flexitank
Multilayered, Single-use, Food grade, Disposable Flexitank
12,000 to 24,000 litres
Bulk liquid transportation
Qingdao ADA Flexitank Co.,Ltd
No.1 RoadJinLing Industrial Park, Jihongtan Subdistrict,
Chengyang District, Qingdao, China.
TEL/FAX:0086 532 68663876
SECTION 2
COMPOSITION / INFORMATION ON INGREDIENT
Component
Outer Layer
Material
Ultra high tensile Woven Polypropylene 230 GSM
Inner Layer
4 layers, Food grade Polyethylene liner (125µm, 125µm,125µm,125µm)
Gland
Valve
Food grade Polyethylene
Food grade Polypropylene
SECTION 3
HAZARDS IDENTIFICATION
This material is not considered to be hazardous according to regulatory guidelines.
SECTION 4
FIRST AID MEASURES
No specific measures required.
SECTION 5
FIRE FIGHTING MEASURES
EXTINGUISHING MEDIA
Appropriate Extinguishing Media: Use water fog, foam, dry chemical or carbon dioxide (CO2) to
extinguish flames
FIRE FIGHTING
Fire Fighting Instructions: Fire fighters should use standard protective equipment and in enclosed
spaces, self-contained breathing apparatus (SCBA).
Page 1 of 3
SECTION 6
ACCIDENTAL RELEASE MEASURES
Not applicable
SECTION 7
HANDLING AND STORAGE
HANDLING
Avoid rough handling and prevent from dropping and contact with sharp objects.
STORAGE
Store in cool and dry place. Do not store under direct sunlight.
SECTION 8
EXPOSURE CONTROLS / PERSONAL PROTECTION
Additional Information about design of technical systems
No further data
General protective and hygiene measures
Usual precautionary measures should be adhered to.
Respiratory Equipment
Recommended use of approved respirator in the event of dust appearing
Hand Protection
Not required
Eye Protection
Not required with proper use
Skin and Body Protection
Not required
SECTION 9
PHYSICAL AND CHEMICAL PROPERTIES
As per material used for each component described in SECTION 2.
SECTION 10
STABILITY AND REACTIVITY
As per material used for each component described in SECTION 2.
SECTION 11
DISPOSAL CONSIDERATION
Used flexitanks are to be incinerated or buried in landfill as permitted by local regulations.
Page 2 of 3
SECTION 12
TRANSPORT INFORMATION
Not regulated
SECTION 13
DISCLAIMER OF LIABILITY
The information contained in this document is based upon data believed to be reliable at the time of going to
the press and relates only to matters specifically mentioned in this document. Although BRAID has used
reasonable skill and care in the preparation of this information, in the absence of any overriding obligations
arising under a specific contract, no representation, warranty (expressed or implied), or guarantee is made as
to the suitability, accuracy, reliability or completeness of the information; nothing in this document shall
reduce the user’s responsibility to satisfy itself as to the suitability, accuracy, reliability, and completeness of
such information for its particular use; there is no warranty against intellectual property infringement; and
Braid shall not be liable for any loss, damage or injury that may occur from the use of this information other
than death or personal injury caused by its negligence. No statement shall be construed as an endorsement of
any product or process. For greater certainty, before use of this information contained in this document,
particularly if the product is used for a purpose or under conditions which are abnormal or not reasonably
foreseeable, this information must be reviewed with the supplier of such information.
Page 3 of 3