Transcript Catalogo Listino Völkel V

VC 2016
VÖLKEL GmbH
Morsbachtalstraße 18
D-42855 Remscheid
Postfach 15 01 28
D-42828 Remscheid
Telefon +49 2191 490112
Telefax +49 2191 490125
E-Mail: [email protected]
Internet: www.voelkel.com
Wire Thread Inserts
Filetti Riportati
7
Thread Repair Kits
Kit Ripristina Filetti
19
Thread Repair Workshop Kits
Kit Ripristina Filetti
33
Inserting Tools
Utensili per il Montaggio
41
Tang Break Tools
Attrezzi rottura codolo
41
Extracting Tools
Estrattori
41
STI-Taps
Maschi STI
47
STI-Drills
Punte STI
47
Technical Information
Informazioni tecniche
63
Display
Espositore
67
COST EFFECTIVE REPAIR RATHER THAN EXPENSIVE REPLACEMENT
MEGLIO RIPARARE IN MODO ECONOMICO CHE SOSTITUIRE CON COSTI PIÙ
ELEVATI.
In the mechanical engineering and automotive sector damaged threads such as spark plugs, bolts, oil drain screw
threads, oxygen sensor or exhaust mounts lead to costly and
time-intensive item exchange. For parts with damaged or defective threads there is a second chance:
V-COIL Thread Insert System
Worn and damaged threads can be replaced by Inserts in
just four steps. They are stronger and with the same nominal
diameter as before.
simple handling
fast installation in just four steps
even in difficult to reach places
durable & high quality
cost & time saving
Also used daily in the electrical, medical, and aerospace
industry as a preventive measure.
Nel settore meccanico e automobilistico i filetti danneggiati di
candele, bulloni passanti, tappi di scarico dell'olio, sonde Lambda o del supporto di scarico del tubo di scappamento comportano costose e lunghe sostituzioni. Per pezzi che riportano
filetti logori, spanati o in genere danneggiati esiste una seconda
opzione:
Sistema a inserti filettati V-Coil
Grazie all’impiego di assortimenti filettati e in sole 4 operazioni
vecchi e logori filetti potranno essere completamente rigenerati
tornano al vecchio diametro nominale di partenza.
Facile utilizzo
Facile sostituzione in sole 4 operazioni
Per uso anche in luoghi ristretti
Lunga durata e di elevata qualità
Economico e veloce
Soddisfacente per l’utilizzatore, il cliente e le macchine
Utilizzabile anche per il rinforzo dei filetti in campo
elettrico, medico e aerospaziale
4
DRILLING
FORATURA
CHECK
CONTROLLI
TAPPING
FILETTO
INSTALL THE INSERT
INTRODUZIONE DELL'INSERTO
FILETTATO
Clear the damaged thread with a Standard Drill.
Up to M 12 (1/2") the KITS include the correct drill.
To repair a spark plug thread no pre-drilling is
necessary if using the special Spark Plug Tap.
Please pay attention that for Fluteless Taps bigger
holes are required.
Eliminare il filetto danneggiato con una punta normale. I nostri kit includono punte fino a M12 (1/2").
Nella sostituzione di una candela non è necessario
eseguire la preforatura se si usa lo speciale attrezzo
combinato per foratura e taglio. Nota bene: per i maschi per laminazione sono necessari fori più grandi.
Check that thread and pitch of the tap and the bolt
match.
Verificare che il maschio e il bullone abbiano lo stesso
filetto e lo stesso passo.
Use the special V-COlL-Taps for cutting the
holding thread into the cleared hole.
It is recommended to use a suitable cutting oil.
Utilizzando gli speciali maschi V-COIL, tagliare il filetto
di presa nel foro preforato. E' consigliabile l'uso di olio
da taglio adeguato.
Place insert on Installation Tool and position the
adjustable ring so that the insert tang is centred in
the tang slot. Wind the Insert in with a light downward
pressure until a half turn below the surface. Don’t
work against thread direction as the tang could break.
Porre il filetto sull'attrezzo di inserimento e posizionare l'anello regolabile in modo che il perno di trascinamento si incastri nella sede dell'apertura. Avvitare
quindi con una leggera pressione verso il basso fino a
mezzo giro sotto la superficie. Non avvitare in senso
opposto al filetto per evitare rotture del codolo.
TANG REMOVAL
ELIMINAZIONE DEL CODOLO
After finishing lift the Installation Tool and use the
Tang Break Tool to remove the tang. For bigger
sizes and Spark Plug Taps use Long Nose Pliers to
remove the tang.
Due to the narrow and exact tolerances the new
thread normally is stronger than the original one.
Una volta terminato l'inserimento del filetto, estrarre
l'attrezzo di inserimento ed eliminare il perno di trascinamento con l'attrezzo rottura codolo. Nel caso di
grandi dimensioni e di candele utilizzare pinze lunghe
per rimuovere il codolo. Grazie alle tolleranze ridotte
e precise, il nuovo riletto risulta normalmente più forte
dell'originale.
Application:
Applicazioni:
Thread Armour Plating. For material with low shear
strenght eg. aluminum-alloys and magnesium alloys. Used
in machine-building, electrical, automotive medical and
aerospace industries.
Thread Repair of damaged or worn-out threads.
Recovery of rejected items.
Rivestimento del filetto. Per materiali teneri, pr es. Le leghe di alluminio
e di magnesio. Utilizzati nella costruzione di macchine, nel settore elettrico,
automotibilistico, medico ed aerospaziale.
Riparazione di filetti danneggiati o usurati.
Recupero di pezzi di scarto.
5
WIRE THREAD INSERTS
FILETTI RIPORTATI
Manufactured from high quality chromium nickel stainless steel, V-Coil
inserts provide high strength internal threads that resist the effects of temperature and corrosion.
Their unique design ensures superior threads whose compound performance cannot be reproduced by any other single fastening method.
Available in two basic forms, free running or screw locking, they are much
lighter and less expensive than any other equivalent type of thread insert and
because of their compact size they can generally be incorporated into existing designs where no previous provision has been made.
Free Running - Type "S"
Produced from precision profiled austenitic stainless steel wire wound into
a helical spiral, V-Coil free running inserts have a spring like appearance.
When installed, using any one of a variety of manual or automatic tools, they
provide strong permanent internal threads which resist head and corrosion.
Once fitted, their position is maintained by the action of radial pressure
between their coils and the flanks of the tapped hole. This pressure exists
because their free diameter is larger, by a calculated amount, than their
installed diameter.
Screw Locking - Type "SL"
Screw locking (or prevailing torque) inserts are of particular value in applications subject to the effects of cyclic vibration or impact. In addition to the
benefits afforded by free running inserts, V-Coil screw locking inserts offer
the additional security of prevailing locking torque. This is achieved by the action of one or more polygonal grip coils positioned within the insert's length,
which exert radial pressure on the male thread. Each grip coil consists
of a number of tangential locking chords which protrude inside the minor
diameter of the normal free running coils. As the male thread passes through
these grip coils, the locking flats are displaced thus exerting radial pressure
or prevailing torque on the male thread. On removal of the male thread, the
locking coils relax to their original form permitting repeated assembly whilst
retaining a measurable level of prevailing torque.
Note: It is recommended that only close fit plated or lubricated bolts or
screws are used with screw locking inserts.
S
I filetti V-COIL, construiti con acciaio inox al nichelcromo, sono filetti interni
estremamente robusti, resistenti agli effetti della temperatura e della corrosione.
Il design unico garantisce filetti di qualità superiore le cui prestazioni combinate non sono imitabili da nessun altro metodo di fissaggio singolo.
Disponibili in due formati, a scorrimento libero o autofrenanti, i filetti V-COIL
sono molto più leggeri e convenienti di qualsiasi altro tipo equivalente di
filetto riportato.
Filetti a scorrimento libero - "free running"
SL
Prodotti da profilato di precisione in acciaio inox austenitico avvolti a spirale
elicoidale, i filetti riportati V-COIL hanno l'aspetto di una molla. Una volta
inserti usando un attrezzo a scelta da una selezione di utensili manuali o
automatici, essi sono filetti permanenti interni resistenti al calore e alla corrosione. Quando sono posizionati, la loro posizione è mantenuta dall'azione
della pressione radiale fa le bobine e i fianchi del foro filettato. Questa
pressione è data dal loro diametro libero che è maggiore, di una misura
calcolata, rispetto al diametro installato.
Filetti autofrenanti - "screw locking"
I filetti autofrenanti (o con coppia prevalente) sono particolarmente validi
nelle applicazioni soggette a vibrazioni cicliche o a impatti. Oltre ai vantaggi
garantiti dai filetti a scorrimento libero, i filetti autofrenanti V-COIL offrono
inoltre la sicurezza della coppia frenante prevalente. Questo grazie all'azione
di uno o più bobine di presa poligonali collocate sulla lunghezza dei filetti
che esercitano una pressione radiale sul filetto maschio. Ciascuna bobina di
presa è composta da un numero di filature di blocco che sporgono entro il
diametro inferiore delle normali bobine a scorrimento libero. Quando il filetto
maschio passa attraverso queste bobine di presa, si spostano i locking flats,
esercitando una pressione radiale o coppia prevalente sul filetto maschio.
Rimuovendo il filetto maschio, le bobine di presa tornano alla loro forma
originale permettendo il montaggio ripetuto mantenendo un livello misurabile
di coppia prevalente.
Nota: con i filetti autofrenanti si raccomanda l'uso esclusivo di bulloni o viti
close fit plated o lubrificati.
WIRE THREAD INSERTS
FILETTI RIPORTATI
M / MF
Typ S
Typ SL
Typ SP
Typ LS
8-9
13
14
14
UNC
10
UNF
10
UNx8
11
BSW
12
BSF
12
G (BSP)
9
Refill Pack
Confezioni ricarica
15 - 17
7
Wire Thread Inserts - Type "S"
"free running", stainless steel
Filetti Riportati - tipo standard
scorrimento libero, di acciaio inox
DIN 8140
Tol. ISO 2 (6H)
Nominal
Diameter D
M 2 x 0.4
M 2.2 x 0.45
M 2.5 x 0.45
M 3 x 0.5
M 3.5 x 0.6
M 4 x 0.7
M 5 x 0.8
M 6 x 1.0
M 7 x 1.0
M 8 x 1.25
M 8 x 1.0
M 9 x 1.25
M 10 x 1.5
M 10 x 1.25
M 10 x 1.0
M 11 x 1.5
M 12 x 1.75
M 12 x 1.5
M 12 x 1.25
M 12 x 1.0
M 14 x 2.0
M 14 x 1.5
M 14 x 1.25
M 14 x 1.0
M 16 x 2.0
M 16 x 1.5
M 18 x 2.5
M 18 x 2.0
M 18 x 1.5
M 20 x 2.5
M 20 x 2.0
M 20 x 1.5
M 22 x 2.5
M 22 x 2.0
M 22 x 1.5
M 24 x 3.0
M 24 x 2.0
M 24 x 1.5
1,0 D
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
50
50
50
50
50
50
25
25
25
25
25
25
10
10
10
10
10
10
Art.-No.
07202
07203
07204
07205
07206
07207
07208
07209
07210
07211
07212
07213
07215
07216
07217
07219
07221
07222
07223
07224
07225
07226
07227
07231
07234
07235
07236
07237
07238
07239
07240
07241
07242
07243
07244
07245
07246
07247
1,5 D
€/Piece
0,47
0,47
0,14
0,14
0,16
0,14
0,16
0,17
0,19
0,18
0,21
0,25
0,23
0,23
0,23
0,38
0,34
0,34
0,34
0,34
0,48
0,48
0,48
0,58
0,65
0,65
0,95
0,95
0,95
1,10
1,10
1,10
1,20
1,20
1,20
1,50
1,50
1,50
Art.-No.
07302
07303
07304
07305
07306
07307
07308
07309
07310
07311
07312
07313
07315
07316
07317
07319
07321
07322
07323
07324
07325
07326
07327
07331
07334
07335
07336
07337
07338
07339
07340
07341
07342
07343
07344
07345
07346
07347
2,0 D
€/Piece
0,61
0,61
0,15
0,15
0,17
0,15
0,13
0,14
0,23
0,18
0,21
0,34
0,25
0,25
0,25
0,43
0,39
0,39
0,39
0,39
0,55
0,55
0,55
0,60
0,68
0,68
1,10
1,10
1,10
1,40
1,40
1,40
1,50
1,50
1,50
1,60
1,60
1,60
Art.-No.
07402
07403
07404
07405
07406
07407
07408
07409
07410
07411
07412
07413
07415
07416
07417
07419
07421
07422
07423
07424
07425
07426
07427
07431
07434
07435
07436
07437
07438
07439
07440
07441
07442
07443
07444
07445
07446
07447
2,5 D
€/Piece
0,71
0,71
0,16
0,16
0,18
0,16
0,18
0,21
0,25
0,25
0,27
0,34
0,29
0,29
0,29
0,46
0,44
0,44
0,44
0,44
0,57
0,57
0,57
0,69
0,84
0,84
1,50
1,50
1,50
1,80
1,80
1,80
1,90
1,90
1,90
2,00
2,00
2,00
Wire Thread Inserts for Spark Plug
Filetti Riportati per filetti della candela di accensione
Nominal
8,40 mm
Diameter D
M 14 x 1.25
8
50
12,40 mm
16,40 mm
Art.-No. €/Piece
Art.-No. € /Piece
Art.-No. € /Piece
07128
07228
07328
0,55
0,55
0,55
Art.-No.
07502
07503
07504
07505
07506
07507
07508
07509
07510
07511
07512
07513
07515
07516
07517
07519
07521
07522
07523
07524
07525
07526
07527
07531
07534
07535
07536
07537
07538
07539
07540
07541
07542
07543
07544
07545
07546
07547
€/Piece
0,80
0,80
0,19
0,19
0,21
0,19
0,22
0,25
0,30
0,30
0,32
0,37
0,35
0,35
0,35
0,56
0,52
0,52
0,52
0,52
0,69
0,69
0,69
0,84
0,92
0,92
1,70
1,70
1,70
2,00
2,00
2,00
2,20
2,20
2,20
2,40
2,40
2,40
3,0 D
Art.-No.
07602
07603
07604
07605
07606
07607
07608
07609
07610
07611
07612
07613
07615
07616
07617
07619
07621
07622
07623
07624
07625
07626
07627
07631
07634
07635
07636
07637
07638
07639
07640
07641
07642
07643
07644
07645
07646
07647
€ /Piece
1,00
1,00
0,23
0,23
0,25
0,21
0,26
0,31
0,36
0,36
0,39
0,44
0,42
0,42
0,42
0,63
0,63
0,63
0,63
0,63
0,84
0,84
0,84
1,00
1,00
1,00
2,00
2,00
2,00
2,30
2,30
2,30
2,50
2,50
2,50
2,80
2,80
2,80
Wire Thread Inserts - Type "S"
"free running", stainless steel
Filetti Riportati - tipo standard
scorrimento libero, di acciaio inox
DIN 8140
Tol. ISO 2 (6H)
Nominal
1,5 D
Diameter D
Art.-No.
€ /Piece
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
26 x 1.5
27 x 3.0
27 x 2.0
27 x 1.5
28 x 1.5
30 x 3.5
30 x 2.0
30 x 1.5
33 x 3.5
33 x 2.0
36 x 4.0
36 x 3.0
36 x 2.0
36 x 1.5
39 x 4.0
39 x 3.0
40 x 3.0
42 x 4.5
42 x 3.0
45 x 4.5
45 x 3.0
48 x 5.0
48 x 3.0
50 x 3.0
52 x 5.0
52 x 3.0
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
07349
07350
07351
07352
07353
07354
07355
07356
07357
07358
07360
07361
07362
07363
07364
07365
07368
07372
07373
07377
07378
07382
07383
07387
07390
07391
2,60
2,60
2,60
2,60
2,60
3,00
3,00
3,00
3,80
3,80
3,80
3,80
3,80
3,80
9,50
9,50
13,30
13,30
13,30
16,00
16,00
21,00
16,00
21,00
22,50
22,50
50
50
50
50
5
5
5
5
08380
08381
08382
08383
08384
08385
08386
08387
0,40
0,60
0,70
0,90
2,25
2,25
6,90
6,90
G (BSP)
1/8 x 28
1/4 x 19
3/8 x 19
1/2 x 14
5/8 x 14
3/4 x 14
7/8 x 14
1" x 11
9
Wire Thread Inserts - Type "S"
"free running", stainless steel
Filetti Riportati - tipo standard
scorrimento libero, di acciaio inox
DIN 8140
Tol. 2B Nominal
1,0 D
Diameter D
Art.-No. € /Piece
1,5 D
Art.-No. € /Piece
2,0 D
2,5 D
3,0 D
Art.-No. € /Piece
Art.-No. € /Piece
Art.-No. € /Piece
UNC
No. 2 x 56
No. 4 x 40
No. 5 x 40
No. 6 x 32
No. 8 x 32
No. 10 x 24
No. 12 x 24
1/4 x 20
5/16 x 18
3/8 x 16
7/16 x 14
1/2 x 13
9/16 x 12
5/8 x 11
3/4 x 10
7/8 x 9
1" x 8
1.1/8 x 7
1.1/4 x 7
1.3/8 x 6
1.1/2 x 6
100
100
100
100
100
100
100
100
100
100
100
100
50
50
25
10
10
5
5
5
5
08200
08201
08202
08203
08204
08205
08206
08207
08208
08209
08210
08211
08212
08214
08216
08218
08219
0,47
0,18
0,19
0,14
0,14
0,18
0,19
0,19
0,25
0,39
0,43
0,46
1,50
1,36
1,58
2,10
2,10
08300
08301
08302
08303
08304
08305
08306
08307
08308
08309
08310
08311
08312
08314
08316
08318
08319
08320
08321
08322
08323
0,55
0,17
0,20
0,16
0,16
0,18
0,21
0,21
0,30
0,39
0,52
0,52
2,00
1,82
2,15
3,15
3,15
5,10
5,60
6,20
7,20
08400
08401
08402
08403
08404
08405
08406
08407
08408
08409
08410
08411
08412
08414
08416
08418
08419
0,71
0,18
0,21
0,17
0,17
0,20
0,23
0,23
0,32
0,51
0,59
0,59
2,57
2,26
2,68
4,00
4,00
08500
08501
08502
08503
08504
08505
08506
08507
08508
08509
08510
08511
08512
08514
08516
08518
08519
0,80
0,21
0,25
0,19
0,19
0,24
0,28
0,28
0,38
0,58
0,70
0,70
2,94
2,71
3,18
4,73
4,73
08600
08601
08602
08603
08604
08605
08606
08607
08608
08609
08610
08611
08612
08614
08616
08618
08619
1,00
0,25
0,30
0,22
0,22
0,29
0,34
0,34
0,46
0,69
0,86
0,86
3,55
3,23
3,81
5,74
5,74
100
100
100
100
100
100
100
100
100
50
50
25
10
10
5
5
5
5
08290
08291
08292
08293
08225
08226
08227
08228
08229
08230
08231
08233
08235
08237
0,42
0,42
0,42
0,18
0,18
0,25
0,37
0,46
0,46
1,09
1,09
1,80
2,44
2,44
08390
08391
08392
08393
08325
08326
08327
08328
08329
08330
08331
08333
08335
08337
08396
08397
08398
08399
0,48
0,48
0,48
0,19
0,19
0,27
0,39
0,52
0,52
1,09
1,09
2,50
3,60
3,60
5,10
5,60
6,20
7,20
08490
08491
08492
08493
08425
08426
08427
08428
08429
08430
08431
08433
08435
08437
0,64
0,64
0,64
0,23
0,23
0,32
0,47
0,59
0,59
1,31
1,31
3,02
4,58
4,58
08590
08591
08592
08593
08525
08526
08527
08528
08529
08530
08531
08533
08535
08537
0,71
0,71
0,71
0,28
0,28
0,38
0,57
0,70
0,70
1,50
1,50
3,66
5,26
5,26
08690
08691
08692
08693
08625
08626
08627
08628
08629
08630
08631
08633
08635
08637
0,90
0,90
0,90
0,34
0,34
0,46
0,69
0,86
0,86
1,84
1,84
4,39
6,31
6,31
UNF
No. 4 x 48
No. 6 x 40
No. 8 x 36
No. 10 x 32
1/4 x 28
5/16 x 24
3/8 x 24
7/16 x 20
1/2 x 20
9/16 x 18
5/8 x 18
3/4 x 16
7/8 x 14
1" x 12
1.1/8 x 12
1.1/4 x 12
1.3/8 x 12
1.1/2 x 12
10
Wire Thread Inserts - Type "S"
"free running", stainless steel
Filetti Riportati - tipo standard
scorrimento libero, di acciaio inox
DIN 8140
Tol. 2B
Nominal
1,5 D
Diameter D
Art.-No.
€ /Piece
UNx8
1.1/8 x 8
1.1/4 x 8
1.3/8 x 8
1.1/2 x 8
1.5/8 x 8
1.3/4 x 8
1.7/8 x 8
2" x 8
5
5
5
5
5
5
5
5
08731
08732
08733
08734
08735
08736
08737
08738
5,10
5,60
6,20
7,20
10,30
11,20
12,00
16,10
11
Wire Thread Inserts - Type "S"
"free running", stainless steel
Filetti Riportati - tipo standard
scorrimento libero, di acciaio inox
DIN 8140
Nominal
1,0 D
Diameter D
Art.-No. €/Piece
1,5 D
Art.-No. €/Piece
2,0 D
Art.-No. € /Piece
2,5 D
3,0 D
Art.-No. € /Piece
Art.-No. € /Piece
BSW
1/8 x 40
3/16 x 24
1/4 x 20
5/16 x 18
3/8 x 16
7/16 x 14
1/2 x 12
9/16 x 12
5/8 x 11
3/4 x 10
7/8 x 9
1" x 8
100
100
100
100
100
100
100
50
50
25
10
10
08241
08242
08243
08244
08245
08246
08247
08248
08249
08251
08253
08255
0,55
0,55
0,24
0,28
0,49
0,60
0,60
1,50
1,50
1,94
2,50
2,70
08341
08342
08343
08344
08345
08346
08347
08348
08349
08351
08353
08355
0,64
0,64
0,26
0,32
0,53
0,66
0,66
2,10
2,10
2,50
3,50
4,00
08441
08442
08443
08444
08445
08446
08447
08448
08449
08451
08453
08455
1,00
1,00
0,30
0,35
0,62
0,76
0,76
2,47
2,47
3,05
4,37
4,37
08541
08542
08543
08544
08545
08546
08547
08548
08549
08551
08553
08555
1,13
1,13
0,40
0,42
0,73
0,90
0,90
2,94
2,94
3,66
5,26
5,26
08641
08642
08643
08644
08645
08646
08647
08648
08649
08651
08653
08655
1,21
1,21
0,43
0,51
0,88
1,10
1,10
3,60
3,60
4,39
6,31
6,31
100
100
100
100
100
100
50
50
25
10
10
08262 0,55
08263 0,24
08265 0,26
08266 0,49
08267 0,60
08268 0,60
08269 1,50
08270 1,50
08272 1,94
08274 2,50
08276 2,50
08362
08363
08365
08366
08367
08368
08369
08370
08372
08374
08376
0,64
0,26
0,32
0,53
0,66
0,66
2,00
2,00
2,50
3,50
3,50
08462
08463
08465
08466
08467
08468
08469
08470
08472
08474
08476
1,00
0,30
0,35
0,62
0,76
0,76
2,47
2,47
3,05
4,37
4,37
08562
08563
08565
08566
08567
08568
08569
08570
08572
08574
08576
1,13
0,36
0,42
0,73
0,90
0,90
2,94
2,94
3,66
5,26
5,26
08662
08663
08665
08666
08667
08668
08669
08670
08672
08674
08676
1,21
0,43
0,51
0,88
1,10
1,10
3,60
3,60
4,39
6,31
6,31
BSF
3/16 x 32
1/4 x 26
5/16 x 22
3/8 x 20
7/16 x 18
1/2 x 16
9/16 x 16
5/8 x 14
3/4 x 12
7/8 x 11
1" x 10
12
Wire Thread Inserts - Type "SL"
Screw Locking, stainless steel
red coloured
Filetti Riportati - tipo SL
Autofrenanti, di acciaio inox,
colore rosso
DIN 8140
Tol. ISO 2 (6H)
Nominal
1,0 D
Diameter D
Art.-No. €/Piece
1,5 D
Art.-No. €/Piece
2,0 D
Art.-No. €/Piece
M
M
M
M
M
M
M
M
M
M
3 x 0.5
4 x 0.7
5 x 0.8
6 x 1.0
8 x 1.25
10 x 1.5
12 x 1.75
14 x 2.0
16 x 2.0
100
100
100
100
100
100
100
50
50
05205
05207
05208
05209
05211
05215
05221
05225
05234
0,17
0,17
0,19
0,21
0,22
0,28
0,41
0,58
0,78
05305
05307
05308
05309
05311
05315
05321
05325
05334
0,18
0,18
0,20
0,23
0,25
0,30
0,47
0,66
0,82
05405
05407
05408
05409
05411
05415
05421
05425
05434
0,19
0,19
0,22
0,25
0,30
0,35
0,53
0,69
1,01
13
Solid Thread Inserts SP
stainless steel
Inserti filettati a bussola SP
in acciaio automatico zincato
Nominal
R
Diameter D
M
M
M
M
14 x1.25
14 x1.25
14 x1.25
14 x1.25
9.5 mm
11.2 mm
12.7 mm
17.5 mm
10
10
10
10
Art.-No.
Price
19136
19137
19138
19139
€
3,00
3,10
3,10
3,30
Solid Thread Inserts LS
stainless steel
inserti filetti LS
in acciaio inossidabile
Nominal
Diameter D
M 18 x1.5
R
9.0 mm
10
Art.-No.
Price
19147
€
8,90
Art.-No.
Price
19149
€
8,00
Wire Thread Inserts LS
INCONEL X750
Filetti Riportati LS
di INCONEL X750
Nominal
Diameter D
M18 x1.5
14
R
9.0 mm
10
Refill Pack
Wire Thread Inserts - Type “S”
Confezioni ricarica
Filetti Riportati - tipo standard
DIN 8140
Tol. ISO 2 (6H)
Nominal
Piece
1,0 D
1,5 D
2,0 D
2,5 D
3,0 D
Diameter D
pezzo
Art.-No. €
7,30
40202
7,30
40203
3,90
40204
3,90
40205
4,10
40206
3,90
40207
4,10
40208
4,20
40209
4,40
40210
4,30
40211
4,60
40212
3,70
40213
3,60
40215
40216
3,60
40217
3,60
40219
4,40
40221
4,20
40222
4,20
40223
4,20
40224
4,20
40225
4,90
40226
4,90
40227
4,90
40231
5,50
40234
5,80
40235
5,80
40236
7,40
40237
7,40
40238
7,40
40239
8,20
40240
8,20
40241
8,20
40242
8,70
40243
8,70
40244
8,70
40245
10,30
40246
10,30
40247
10,30
Art.-No. €
8,80
40302
8,80
40303
4,00
40304
4,00
40305
4,20
40306
4,00
40307
3,80
40308
3,90
40309
4,80
40310
4,30
40311
4,60
40312
4,20
40313
3,70
40315
40316
3,70
40317
3,70
40319
4,70
40321
4,50
40322
4,50
40323
4,50
40324
4,50
40325
5,30
40326
5,30
40327
5,30
40331
5,60
40334
6,00
40335
6,00
40336
8,20
40337
8,20
40338
8,20
40339
9,80
40340
9,80
40341
9,80
40342
10,30
40343
10,30
40344
10,30
40345
10,80
40346
10,80
40347
10,80
Art.-No. €
9,90
40402
9,90
40403
4,10
40404
4,10
40405
4,30
40406
4,10
40407
4,30
40408
4,60
40409
5,00
40410
5,00
40411
5,30
40412
4,20
40413
3,90
40415
40416
3,90
40417
3,90
40419
4,80
40421
4,70
40422
4,70
40423
4,70
40424
4,70
40425
5,40
40426
5,40
40427
5,40
40431
6,00
40434
6,80
40435
6,80
40436
10,30
40437
10,30
40438
10,30
40439
11,90
40440
11,90
40441
11,90
40442
12,40
40443
12,40
40444
12,40
40445
12,90
40446
12,90
40447
12,90
Art.-No. €
40502 10,80
40503 10,80
4,40
40504
4,40
40505
4,60
40506
4,40
40507
4,70
40508
5,00
40509
5,60
40510
5,60
40511
5,80
40512
4,40
40513
40515
4,30
40516
4,30
40517
4,30
40519
5,40
40521
5,10
40522
5,10
40523
5,10
40524
5,10
40525
6,00
40526
6,00
40527
6,00
40531
6,80
40534
7,20
40535
7,20
40536
11,30
40537
11,30
40538
11,30
40539
12,90
40540
12,90
40541
12,90
40542
14,00
40543
14,00
40544
14,00
40545
15,00
40546
15,00
40547
15,00
Art.-No. €
40602 12,90
40603 12,90
4,80
40604
4,80
40605
5,00
40606
4,60
40607
5,10
40608
5,70
40609
6,20
40610
6,20
40611
6,50
40612
4,70
40613
4,60
40615
40616
4,60
40617
4,60
40619
5,70
40621
5,70
40622
5,70
40623
5,70
40624
5,70
40625
6,80
40626
6,80
40627
6,80
40631
7,70
40634
7,70
40635
7,70
40636
12,90
40637
12,90
40638
12,90
40639
14,50
40640
14,50
40641
14,50
40642
15,50
40643
15,50
40644
15,50
40645
17,10
40646
17,10
40647
17,10
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
2 x 0,4
2,2 x 0,45
2,5 x 0,45
3 x 0,5
3,5 x 0,6
4 x 0,7
5 x 0,8
6 x 1,0
7 x 1,0
8 x 1,25
8 x 1,0
9 x 1,25
10 x 1,5
10 x 1,25
10 x 1,0
11 x 1,5
12 x 1,75
12 x 1,5
12 x 1,25
12 x 1,0
14 x 2,0
14 x 1,5
14 x 1,25
14 x 1,0
16 x 2,0
16 x 1,5
18 x 2,5
18 x 2,0
18 x 1,5
20 x 2,5
20 x 2,0
20 x 1,5
22 x 2,5
22 x 2,0
22 x 1,5
24 x 3,0
24 x 2,0
24 x 1,5
10
10
10
10
10
10
10
10
10
10
10
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
Thread Repair Kits for spark plug thread
Filetti Riportati per filetti della candela di accensione
Nominal
Piece
Diameter D
M 14 x 1,25
pezzo
5
8,40 mm
Art.-No.
40229
€
5,30
12,40 mm
Art.-No.
40228
€
5,30
16,40 mm
Art.-No.
40328
€
5,30
15
Refill Pack
Wire Thread Inserts - Type “S”
Confezioni ricarica
Filetti Riportati - tipo standard
DIN 8140
Tol. 2B
Nominal
Piece
Diameter D
pezzo
1,0 D
Art.-No. €
1,5 D
Art.-No. €
2,0 D
Art.-No. €
2,5 D
Art.-No. €
3,0 D
Art.-No. €
UNC
UNC No.2
UNC No.4
UNC No.5
UNC No.6
UNC No.8
UNC No.10
UNC No.12
UNC 1/4
UNC 5/16
UNC 3/8
UNC 7/16
UNC 1/2
UNC 9/16
UNC 5/8
UNC 3/4
UNC 7/8
UNC 1"
10
10
10
10
10
10
10
10
10
5
5
5
5
5
5
5
5
44200
44201
44202
44203
44204
44205
44206
44207
44208
44209
44210
44211
44212
44213
44216
44218
44219
7,40
4,30
4,40
3,90
3,90
4,30
4,40
4,40
5,00
4,50
4,70
4,80
10,30
9,60
10,70
13,40
13,40
44300
44301
44302
44303
44304
44305
44306
44307
44308
44309
44310
44311
44312
44314
44316
44318
44319
8,20
4,20
4,50
4,10
4,10
4,30
4,60
4,60
5,60
4,50
5,10
5,10
12,90
12,00
13,70
19,00
19,00
44400
44401
44402
44403
44404
44405
44406
44407
44408
44409
44410
44411
44412
44414
44416
44418
44419
9,90
4,30
4,60
4,20
4,20
4,50
4,80
4,80
5,80
5,10
5,50
5,50
15,90
14,30
16,50
23,40
23,40
44500
44501
44502
44503
44504
44505
44506
44507
44508
44509
44510
44511
44512
44513
44516
44518
44519
10,80
4,60
5,00
4,40
4,40
4,90
5,40
5,40
6,40
5,50
6,10
6,10
17,90
16,60
19,10
27,30
27,30
44600
44601
44602
44603
44604
44605
44606
44607
44608
44609
44610
44611
44612
44614
44616
44618
44619
12,90
5,00
5,60
4,70
4,70
5,50
6,00
6,00
7,20
6,00
6,90
6,90
21,10
19,40
22,40
32,60
32,60
10
10
10
10
10
10
5
5
5
5
5
5
5
5
44221
44222
44223
44224
44225
44226
44227
44228
44229
44230
44231
44233
44235
44237
6,80
6,80
6,80
4,30
4,30
5,00
4,40
4,80
4,80
8,10
8,10
11,90
15,20
15,20
44321
44322
44323
44324
44325
44326
44327
44328
44329
44330
44331
44333
44335
44337
7,50
7,50
7,50
4,40
4,40
5,30
4,50
5,10
5,10
8,10
8,10
15,50
21,30
21,30
44421
44422
44423
44424
44425
44426
44427
44428
44429
44430
44431
44433
44435
44437
9,10
9,10
9,10
4,80
4,80
5,80
4,90
5,50
5,50
9,30
9,30
18,30
26,50
26,50
44521
44522
44523
44524
44525
44526
44527
44528
44529
44530
44531
44533
44535
44537
9,90
9,90
9,90
5,40
5,40
6,40
5,40
6,10
6,10
10,30
10,30
21,60
30,00
30,00
44621
44622
44623
44624
44625
44626
44627
44628
44629
44630
44631
44633
44635
44637
11,90
11,90
11,90
6,00
6,00
7,20
6,00
6,90
6,90
12,10
12,10
25,50
35,50
35,50
UNF
UNF No.4
UNF No.6
UNF No.8
UNF No.10
UNF 1/4
UNF 5/16
UNF 3/8
UNF 7/16
UNF 1/2
UNF 9/16
UNF 5/8
UNF 3/4
UNF 7/8
UNF 1"x12
16
Refill Pack
Wire Thread Inserts - Type “S”
Confezioni ricarica
Filetti Riportati - tipo standard
DIN 8140
Nominal
Piece
Diameter D
pezzo
BSW
BSW
BSW
BSW
BSW
BSW
BSW
BSW
BSW
BSW
BSW
BSW
BSW
BSF
BSF
BSF
BSF
BSF
BSF
BSF
BSF
BSF
BSF
BSF
BSF
1,0 D
1,5 D
2,0 D
2,5 D
3,0 D
Art.-No. €
Art.-No. €
Art.-No. €
Art.-No. €
Art.-No. €
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1"
10
10
10
10
5
5
5
5
5
5
5
5
44241
44242
44243
44244
44245
44246
44247
44248
44249
44251
44253
44255
8,20
8,20
4,90
5,40
5,00
5,60
5,60
10,30
10,30
12,60
15,50
16,60
44341
44342
44343
44344
44345
44346
44347
44348
44349
44351
44353
44355
9,10
9,10
5,10
5,80
5,20
5,90
5,90
13,40
13,40
15,50
20,80
23,40
44441
44442
44443
44444
44445
44446
44447
44448
44449
44451
44453
44455
12,90
12,90
5,60
6,10
5,70
6,40
6,40
15,40
15,40
18,40
25,40
25,40
44541
44542
44543
44544
44545
44546
44547
44548
44549
44551
44553
44555
14,30
14,30
6,60
6,80
6,30
7,10
7,10
17,90
17,90
21,60
30,00
30,00
44641
44642
44643
44644
44645
44646
44647
44648
44649
44651
44653
44655
15,10
15,10
6,90
7,80
7,00
8,20
8,20
21,30
21,30
25,50
35,50
35,50
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1"
10
10
10
5
5
5
5
5
5
5
5
44262
44263
44265
44266
44267
44268
44269
44270
44272
44274
44276
8,20
4,90
5,10
5,00
5,60
5,60
10,30
10,30
12,60
15,50
15,50
44362
44363
44365
44366
44367
44368
44369
44370
44372
44374
44376
9,10
5,10
5,80
5,20
5,90
5,90
12,90
12,90
15,50
20,80
20,80
44462
44463
44465
44466
44467
44468
44469
44470
44472
44474
44476
12,90
5,60
6,10
5,70
6,40
6,40
15,40
15,40
18,40
25,40
25,40
44562
44563
44565
44566
44567
44568
44569
44570
44572
44574
44576
14,30
6,20
6,80
6,30
7,10
7,10
17,90
17,90
21,60
30,00
30,00
44662
44663
44665
44666
44667
44668
44669
44670
44672
44674
44676
15,10
6,90
7,80
7,00
8,20
8,20
21,30
21,30
25,50
35,50
35,50
44380
44381
44382
44383
4,50
5,60
6,10
7,10
G(BSP)
G
G
G
G
1/8
1/4
3/8
1/2
5
5
5
5
17
THREAD REPAIR KITS
KIT RIPRISTINA FILETTI
= application flexibility
= Flessibilità di utilizzo
Advantages:
• all tools with 1/4“ Hexagon Drive
• to be used by hand or cordless powertool
• no adjustment by hand while assembling
• handy, even in awkward places
Vantaggi:
• Tutti gli utensili con attacco esagonale da ¼
• Per uso a mano o per uso con avvitatori a batteria
• Nessun tipo di regolazione a mano durante l’impiego
• A mano per uso anche in luoghi ristretti
= three drive changes
= tre sistemi di manovra
18
THREAD REPAIR KITS
KIT RIPRISTINA FILETTI
M / MF
V-COIL
V-COIL rapid
V-COIL Automotive
21 - 23
20
29 - 32
UNC
24
UNF
25
UNx8
26
BSW
27
BSF
27
G (BSP)
28
19
Thread Repair Kits V-COIL rapid
Wire Thread Inserts 1,5 D
Kit Ripristina Filetti V-COIL rapid
Filetti Riportati - tipo standard 1,5 D
Art.-No.
€
04303
04305
04307
04309
04310
04312
04316
04321
20,60
20,60
20,60
21,40
23,10
29,40
31,40
35,20
M
M 2.5 x 0.45
M 3 x 0.5
M 4 x 0.7
M 5 x 0.8
M 6 x 1.0
M 8 x 1.25
M 10 x 1.5
M 12 x 1.75
2.6 mm
3.2 mm
4.2 mm
5.2 mm
6.3 mm
8.3 mm
10.4 mm
12.4 mm
08090
08091
08092
08093
08094
08095
08096
08097
07090
07091
07092
07093
07094
07095
07096
07097
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
10
10
10
10
10
10
10
6
1/4"
20
Thread Repair Kits
Wire Thread Inserts 1,5 D
Kit Ripristina Filetti
Filetti Riportati - tipo standard 1,5 D
Art.-No.
€
04001
04003
04005
04006
04007
04009
04010
04011
04012
04013
04014
04016
04017
04018
04019
04021
04022
04023
04024
04028
04029
04030
04031
04032
04033
04034
04035
04036
04037
04038
04039
04040
04041
04042
04043
04044
04045
20,60
20,60
20,60
20,60
20,60
21,40
23,10
29,40
29,40
29,40
32,60
31,40
31,40
31,40
35,20
35,20
35,20
35,20
35,20
39,40
39,40
39,40
39,40
47,70
47,70
56,60
56,60
56,60
61,30
61,30
61,30
70,60
70,60
70,60
81,40
81,40
81,40
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
2 x 0.4
2.5 x 0.45
3 x 0.5
3.5 x 0.6
4 x 0.7
5 x 0.8
6 x 1.0
7 x 1.0
8 x 1.25
8 x 1.0
9 x 1.25
10 x 1.5
10 x 1.25
10 x 1.0
11 x 1.5
12 x 1.75
12 x 1.5
12 x 1.25
12 x 1.0
14 x 2.0
14 x 1.5
14 x 1.25
14 x 1.0
16 x 2.0
16 x 1.5
18 x 2.5
18 x 2.0
18 x 1.5
20 x 2.5
20 x 2.0
20 x 1.5
22 x 2.5
22 x 2.0
22 x 1.5
24 x 3.0
24 x 2.0
24 x 1.5
2.1 mm
2.6 mm
3.2 mm
3.7 mm
4.2 mm
5.2 mm
6.3 mm
7.3 mm
8.3 mm
8.3 mm
9.3 mm
10.4 mm
10.3 mm
10.3 mm
11.4 mm
12.4 mm
12.4 mm
12.3 mm
12.3 mm
No. 2
No. 3
No. 4
No. 5
No. 6
No. 8
No. 9
No. 10
No. 11
No. 11
No. 12
No. 13
No. 13
No. 13
No. 14
No. 15
No. 15
No. 15
No. 15
No. 16
No. 16
No. 17
No. 17
No. 18
No. 18
No. 20
No. 20
No. 20
No. 21
No. 21
No. 21
No. 22
No. 22
No. 22
No. 23
No. 23
No. 23
No. 2
No. 3
No. 4
No. 5
No. 6
No. 8
No. 9
No. 11
No. 11
No. 11
No. 12
No. 13
No. 13
No. 13
No. 14
No. 15
No. 15
No. 15
No. 15
20
20
20
20
20
20
20
20
20
20
15
15
15
15
10
10
10
10
10
10
10
10
10
10
10
5
5
5
5
5
5
5
5
5
5
5
5
21
Thread Repair Kits
STI-taps, sets of 2 pcs.
Inserting Tool with Hexagon Drive
Wire Thread Inserts 1,5 D
Kit Ripristina Filetti
Maschi STI, set di 2 pz.
Utensile per il Montaggio con attacco esagonale
Filetti Riportati - tipo standard 1,5 D
Size
Art.-No.
€
04049
04050
04051
04052
04053
04054
04055
04056
04057
04058
04060
04061
04062
04063
04231
04232
04233
04234
04235
04236
04237
04238
04239
04240
04241
04242
250,00
250,00
250,00
250,00
250,00
295,00
295,00
295,00
305,00
305,00
325,00
325,00
325,00
325,00
470,00
410,00
470,00
630,00
470,00
650,00
570,00
795,00
590,00
630,00
990,00
850,00
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
22
26 x 1.5
27 x 3.0
27 x 2.0
27 x 1.5
28 x 1.5
30 x 3.5
30 x 2.0
30 x 1.5
33 x 3.5
33 x 2.0
36 x 4.0
36 x 3.0
36 x 2.0
36 x 1.5
39 x 4.0
39 x 3.0
40 x 3.0
42 x 4.5
42 x 3.0
45 x 4.5
45 x 3.0
48 x 5.0
48 x 3.0
50 x 3.0
52 x 5.0
52 x 3.0
03049
03050
03051
03052
03053
03054
03055
03056
03057
03058
03060
03061
03062
03063
03064
03065
03066
03067
03068
03069
03070
03071
03072
03073
03074
03075
08024
08025
08026
08027
08028
08029
08030
08031
08032
08033
08034
08035
08036
08037
08038
08039
08040
08041
08042
08043
08044
08045
08046
08047
08048
08049
07349
07350
07351
07352
07353
07354
07355
07356
07357
07358
07360
07361
07362
07363
07364
07365
07368
07372
07373
07377
07378
07382
07383
07387
07390
07391
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
Thread Repair Kits
with Machine Inserting Tool
and STI-Machine Tap (Spiral Point)
Kit Ripristina Filetti
con utensile per il montaggio a macchina
e Maschi STI a Macchina (Forma B)
Art.-No.
€
04070
04071
04072
04073
04074
04075
04076
23,90
23,90
24,70
26,30
33,70
36,40
40,70
M
M 3 x 0.5
M 4 x 0.7
M 5 x 0.8
M 6 x 1.0
M 8 x 1.25
M 10 x 1.5
M 12 x 1.75
3.2 mm
4.2 mm
5.2 mm
6.3 mm
8.3 mm
10.4 mm
12.4 mm
No. 4
No. 6
No. 8
No. 9
No. 11
No. 13
No. 15
20
20
20
20
20
15
10
23
Thread Repair Kits
Wire Thread Inserts 1,5 D
Kit Ripristina Filetti
Filetti Riportati - tipo standard 1,5 D
Art.-No
€
UNC
No. 2 x 56
No. 4 x 40
No. 5 x 40
No. 6 x 32
No. 8 x 32
No. 10 x 24
No. 12 x 24
1/4 x 20
5/16 x 18
3/8 x 16
7/16 x 14
1/2 x 13
9/16 x 12
5/8 x 11
3/4 x 10
7/8 x 9
1" x 8
2.4 mm
3.1 mm
3.4 mm
3.8 mm
4.4 mm
5.2 mm
5.8 mm
6.7 mm
8.3 mm
9.9 mm
11.6 mm
13.0 mm
No. 2
No. 4
No. 4
No. 5
No. 6
No. 7
No. 8
No. 9
No. 10
No. 12
No. 14
No. 15
No. 16
No. 18
No. 20
No. 22
No. 23
No. 2
No. 4
No. 4
No. 5
No. 6
No. 6
No. 8
No. 9
No. 10
No. 12
No. 14
No. 15
20
20
20
20
20
20
20
20
20
15
10
10
10
10
5
5
4
04100
04101
04106
04102
04103
04104
04105
04107
04108
04109
04110
04111
04112
04113
04114
04115
04116
30,00
27,10
27,10
27,10
27,10
27,10
27,10
24,40
29,90
31,90
35,80
39,30
52,50
52,50
67,00
81,40
77,60
Thread Repair Kits
STI-taps, sets of 2 pcs.
Inserting Tool with Hexagon Drive
Wire Thread Inserts 1,5 D
Kit Ripristina Filetti
Maschi STI, set di 2 pz.
Utensile per il Montaggio con attacco esagonale
Filetti Riportati - tipo standard 1,5 D
Size
Art.-No.
€
04117
04118
04119
04135
272,00
300,00
336,00
402,00
Dimensioni
UNC
1.1/8" x 7
1.1/4" x 7
1.3/8" x 6
1.1/2" x 6
24
03117
03118
03119
03120
08050
08051
08052
08053
08320
08321
08322
08323
10
10
10
10
Thread Repair Kits
Wire Thread Inserts 1,5 D
Kit Ripristina Filetti
Filetti Riportati - tipo standard 1,5 D
Art.-No.
€
04120
04121
04122
04123
04125
04126
04127
04128
04129
04130
04131
04132
04133
04134
27,10
27,10
27,10
27,10
24,40
29,90
31,90
35,80
39,30
52,50
52,50
67,00
81,40
77,60
Art.-No.
€
UNF
No. 4 x 48
No. 6 x 40
No. 8 x 36
No. 10 x 32
1/4 x 28
5/16 x 24
3/8 x 24
7/16 x 20
1/2 x 20
9/16 x 18
5/8 x 18
3/4 x 16
7/8 x 14
1" x 12
3.0 mm
3.8 mm
4.4 mm
5.1 mm
6.7 mm
8.3 mm
9.8 mm
11.5 mm
13.0 mm
No. 4
No. 5
No. 6
No. 8
No. 9
No. 11
No. 13
No. 14
No. 15
No. 16
No. 18
No. 21
No. 22
No. 23
No. 4
No. 5
No. 6
No. 8
No. 9
No. 11
No. 13
No. 14
No. 15
20
20
20
20
20
20
15
10
10
10
10
5
5
4
Thread Repair Kits
STI-taps, sets of 2 pcs.
Inserting Tool with Hexagon Drive
Wire Thread Inserts 1,5 D
Kit Ripristina Filetti
Maschi STI, set di 2 pz.
Utensile per il Montaggio con attacco esagonale
Filetti Riportati - tipo standard 1,5 D
Size
Dimensioni
UNF
1.1/8" x 12
1.1/4" x 12
1.3/8" x 12
1.1/2" x 12
03166
03167
03168
03169
08060
08061
08062
08063
08396
08397
08398
08399
10
10
10
10
04136
04137
04138
04139
272,00
300,00
336,00
402,00
25
Thread Repair Kits
STI-taps, sets of 2 pcs.
Inserting Tool with Hexagon Drive
Wire Thread Inserts 1,5 D
Kit Ripristina Filetti
Maschi STI, set di 2 pz.
Utensile per il Montaggio con attacco esagonale
Filetti Riportati - tipo standard 1,5 D
Size
Art.-No.
€
Dimensioni
UNx8
1.1/8 x 8
1.1/4 x 8
1.3/8 x 8
1.1/2 x 8
1.5/8 x 8
1.3/4 x 8
1.7/8 x 8
2" x 8
26
03191
03192
03193
03194
03195
03196
03197
03198
08741
08742
08743
08744
08745
08746
08747
08748
08731
08732
08733
08734
08735
08736
08737
08738
10
10
10
10
10
10
10
10
04731
04732
04733
04734
04735
04736
04737
04738
272,00
300,00
336,00
402,00
432,00
540,00
540,00
780,00
Thread Repair Kits
Wire Thread Inserts 1,5 D
Kit Ripristina Filetti
Filetti Riportati - tipo standard 1,5 D
Art.-No.
€
BSW
1/8 x 40
3/16 x 24
1/4 x 20
5/16 x 18
3/8 x 16
7/16 x 14
1/2 x 12
9/16 x 12
5/8 x 11
3/4 x 10
7/8 x 9
1" x 8
BSF
3/16 x 32
1/4 x 26
5/16 x 22
3/8 x 20
7/16 x 18
1/2 x 16
9/16 x 16
5/8 x 14
3/4 x 12
7/8 x 11
1" x 10
3.4 mm
5.0 mm
6.7 mm
8.3 mm
9.9 mm
11.5 mm
13.0 mm
No. 4
No. 8
No. 9
No. 10
No. 12
No. 14
No. 15
No. 16
No. 18
No. 20
No. 22
No. 23
No. 4
No. 8
No. 9
No. 11
No. 12
No. 14
No. 15
20
20
20
20
15
10
10
10
10
5
5
4
04141
04142
04143
04144
04145
04146
04147
04148
04149
04150
04151
04152
27,10
27,10
24,40
29,90
31,90
35,80
39,30
52,50
52,50
67,00
81,40
77,60
5.0 mm
6.6 mm
8.3 mm
9.9 mm
11.5 mm
13.0 mm
No. 7
No. 9
No. 11
No. 13
No. 14
No. 15
No. 16
No. 18
No. 20
No. 22
No. 23
No. 6
No. 9
No. 11
No. 13
No. 14
No. 15
20
20
20
15
10
10
10
10
5
5
4
04162
04163
04165
04166
04167
04168
04169
04170
04172
04174
04176
27,10
24,40
29,90
31,90
35,80
39,30
52,50
52,50
67,00
81,40
77,60
27
Thread Repair Kits
STI-taps, sets of 2 pcs.
Inserting Tool with Hexagon Drive
Wire Thread Inserts 1,5 D
Kit Ripristina Filetti
Maschi STI, set di 2 pz.
Utensile per il Montaggio con attacco esagonale
Filetti Riportati - tipo standard 1,5 D
Size
Art.-No.
€
04190
04191
04192
04193
04194
04195
04196
04197
60,00
68,00
75,00
96,00
199,00
199,00
278,00
281,00
Dimensioni
G (BSP)
G 1/8 x 28
G 1/4 x 19
G 3/8 x 19
G 1/2 x 14
G 5/8 x 14
G 3/4 x 14
G 7/8 x 14
G 1" x 11
28
03311
03312
03313
03314
03315
03316
03318
03317
08080
08081
08082
08083
08084
08085
08086
08087
08380
08381
08382
08383
08384
08385
08386
08387
10
10
10
10
10
10
10
10
Thread Repair Kits
for spark plug threads
Wire Thread Inserts
STI-Spark Plug Taps with Pilot Nose
Kit Ripristina Filetti
per filetti della candela di accensione
Filetti Riportati
Maschi combinati STI
M 6 x 1.0
M 8 x 1.25
M 10 x 1.5
M 10 x 1.25
M 10 x 1.0
M 12 x 1.25
M 14 x 1.25
M 18 x 1.5
No. 9
No. 11
No. 13
No. 13
No. 13
No. 15
No. 17
No. 20
1,5 D
10
10
10
10
10
10
8,40 mm
5
5
12,40 mm
5
Art.-No.
€
04090
04091
04092
04093
04094
04095
04096
04097
34,00
34,00
36,00
36,00
36,00
42,00
48,50
59,00
16,40 mm
5
29
Thread Repair Kits
for spark plug thread M 14x1,25
HexTap SP
Solid Thread Inserts SP
Kit Ripristina Filetti
per filetti della candela di accensione M 14x1,25
HexTap SP
inserti filetti SP
9,5 mm
16-XL
16-2M
16-4
16-2L
10-S
10-M
10-L
10-XL
10-2L
30
M 16 x 1.25
M 16 x 1.25
M 16 x 1.25
M 16 x 1.25
M 16 x 1.25
M 16 x 1.25
M 16 x 1.25
M 16 x 1.25
M 16 x 1.25
5
4
11,2 mm
4
12,7 mm
11
4
8
17,5 mm
16
4
8
10
10
10
5
10
5
Art.-No.
€
19111
19112
19113
19114
19115
19116
19117
19118
19119
50,00
50,00
50,00
50,00
40,00
40,00
40,00
40,00
40,00
Oil Sump Repair Kits
for oil drain screw threads
HexTap OS, screws and retainer ring
Gamma riparazione coppa olio
per filetti do parafuso de drenagem do òleo
HexTap OS, viti e anelli di tenuta
M 13 x 1.5
M 15 x 1.5
M 17 x 1.5
M 20 x 1.5
M 24 x 1.5
15
15
15
5
5
CU
15
15
15
10
10
Art.-No.
€
19125
19126
19127
19128
19129
40,00
40,00
40,00
40,00
40,00
Alu
10
10
31
Thread Repair Kits
for oxygen sensor thread M 18x1,5
HexTap LS and LSN
Wire Inserts LS Inconel X750 (19149),
Solid Inserts LS (19147)
Kit Ripristina Filetti
per filetti sonda Lambda M 18x1,5
HexTap LS e LSN
Filetti Riportati LS Inconel X750 (19149)
inserti filetti LS (19147)
10E
5EB
10B
32
LSN
M 18 x 1.5
M 18 x 1.5
M 18 x 1.5
LS
M 20 x 1.5
M 20 x 1.5
M 20 x 1.5
19147
5
10
19149
10
5
Art.-No.
€
19102
19104
19106
75,00
80,00
85,00
THREAD REPAIR WORKSHOP KITS
KIT RIPRISTINA FILETTI
V-COIL
M
BSW/BSF
UNC/UNF
34 - 35
37
37
V-COIL rapid
36
with Machine Inserting Tool
con utensile per il montaggio a
macchina
38
38
V-COIL Automotive
39
39
33
Thread Repair Workshop Kits
Kit Ripristina Filetti
Art.-No.
VC80 / M 5 - M 12
M 5 x 0.8
5.2 mm
M 6 x 1.0
6.3 mm
M 8 x 1.25
8.3 mm
M 10 x 1.5
10.4 mm
M 12 x 1.75
12.4 mm
34
No. 8
No. 9
No. 11
No. 13
No. 15
No. 8
No. 9
No. 11
No. 13
No. 15
1,0
1,5
2,0
10
10
10
10
5
10
10
10
10
5
10
10
10
10
5
04080
€
165,00
Thread Repair Workshop Kits
Kit Ripristina Filetti
Art.-No.
VC81 / M 5 - M 12
M 5 x 0.8
M 6 x 1.0
M 8 x 1.25
M 10 x 1.5
M 12 x 1.75
5.2 mm
6.3 mm
8.3 mm
10.4 mm
12.4 mm
No. 8
No. 9
No. 11
No. 13
No. 15
No. 8
No. 9
No. 11
No. 13
No. 15
25
25
25
25
10
VC82 / M 6 - M 14 x 1.25 / NP
M 6 x 1.0
6.3 mm
M 8 x 1.25
8.3 mm
M 10 x 1.5
10.4 mm
M 12 x 1.75
12.4 mm
M 14 x 1.25
No. 9
No. 11
No. 13
No. 15
No. 17
No. 9
No. 11
No. 13
No. 15
25
25
25
10
10
No. 9
No. 11
No. 13
No. 15
25
25
25
10
10
No. 9
No. 11
No. 13
25
25
25
VC83 / M 6 - M 14 x 1.25 / PT (*Spark Plug / per candele)
M 6 x 1.0
6.3 mm
No. 9
M 8 x 1.25
8.3 mm
No. 11
M 10 x 1.5
10.4 mm
No. 13
M 12 x 1.75
12.4 mm
No. 15
M 14 x 1.25*
No. 17
VC85 / M 6 - M 10
M 6 x 1.0
M 8 x 1.25
M 10 x 1.5
6.3 mm
8.3 mm
10.4 mm
No. 9
No. 11
No. 13
€
04081
149,50
04082
164,80
04083
170,00
04085
95,00
35
Thread Repair Workshop Kits V-COIL rapid
Wire Thread Inserts 1,5 D
Kit Ripristina Filetti V-COIL rapid
Filetti Riportati - tipo standard 1,5 D
Art.-No.
€
149,50
VC381 / M 5 - M 12
M 5 x 0.8
5.2 mm
M 6 x 1.0
6.3 mm
M 8 x 1.25
8.3 mm
M 10 x 1.5
10.4 mm
M 12 x 1.75
12.4 mm
08093
08094
08095
08096
08097
07093
07094
07095
07096
07097
1/4"
1/4"
1/4"
1/4"
1/4"
10
10
10
10
10
VC385 / M 6 - M 10
M 6 x 1.0
6.3 mm
M 8 x 1.25
8.3 mm
M 10 x 1.5
10.4 mm
08094
08095
08096
07094
07095
07096
1/4"
1/4"
1/4"
10
10
10
04381
04385
1/4"
36
95,00
Thread Repair Workshop Kits
Wire Thread Inserts 1,5 D
Kit Ripristina Filetti
Filetti Riportati - tipo standard 1,5 D
Art.-No.
UNC 1/4 - 1/2"
UNC 1/4 x 20
UNC5/16 x 18
UNC 3/8 x 16
UNC7/16 x 14
UNC 1/2 x 13
6.7 mm
8.3 mm
9.9 mm
11.6 mm
13.0 mm
No. 9
No. 10
No. 12
No. 14
No. 15
No. 9
No. 11
No. 12
No. 14
No. 15
25
25
25
10
10
UNF 1/4 - 1/2"
UNF 1/4 x 28
UNF 5/16 x 24
UNF 3/8 x 24
UNF 7/16 x 20
UNF 1/2 x 20
6.7 mm
8.3 mm
9.8 mm
11.5 mm
13.0 mm
No. 9
No. 11
No. 13
No. 14
No. 15
No. 9
No. 11
No. 13
No. 14
No. 15
25
25
25
10
10
BSW 1/4 - 1/2"
BSW 1/4 x 20
BSW5/16 x 18
BSW 3/8 x 16
BSW7/16 x 14
BSW 1/2 x 12
6.7 mm
8.3 mm
9.9 mm
11.5 mm
13.0 mm
No. 9
No. 10
No. 12
No. 14
No. 15
No. 9
No. 11
No. 12
No. 14
No. 15
25
25
25
10
10
BSF 1/4 - 1/2"
BSF 1/4 x 26
BSF 5/16 x 22
BSF 3/8 x 20
BSF 7/16 x 18
BSF 1/2 x 16
6.6 mm
8.3 mm
9.9 mm
11.5 mm
13.0 mm
No. 9
No. 11
No. 12
No. 14
No. 15
No. 9
No. 11
No. 12
No. 14
No. 15
25
25
25
10
10
€
04184
185,40
04185
185,40
04186
185,40
04187
185,40
37
Thread Repair Workshop Kits
with Machine Inserting Tools
and STI-Machine Taps (Spiral Point)
Kit Ripristina Filetti
con utensile per il montaggio a macchina
e Maschi STI a Macchina con imbocco corretto
VC87 / M 5 - M 12
M 5 x 0.8
M 6 x 1.0
M 8 x 1.25
M 10 x 1.5
M 12 x 1.75
38
5.2 mm
6.3 mm
8.3 mm
10.4 mm
12.4 mm
M 5
M 6
M 8
M 10
M 12
No. 8
No. 9
No. 11
No. 13
No. 15
25
25
25
25
10
Art.-No.
€
04087
180,00
Oil Sump Repair Workshop Kits
for oil drain screw threads
HexTap OS, screws and retainer ring
Gamma riparazione coppa olio
per filetti do parafuso de drenagem do òleo
HexTap OS, viti e anelli di tenuta
Art.-No.
CU
OS 20
M 13 x 1.5
M 15 x 1.5
M 17 x 1.5
5
5
5
10
10
10
OS 21
M 20 x 1.5
M 24 x 1.5
5
5
10
10
OS 22
M 13 x 1.5
M 15 x 1.5
M 17 x 1.5
M 20 x 1.5
M 24 x 1.5
3
3
3
3
3
3
3
3
3
3
€
Alu
19120
65,00
19121
65,00
19122
110,00
10
10
3
3
39
INSERTING TOOLS
UTENSILI PER IL MONTAGGIO
Advantages:
• easy handling
• one tool for various dimensions
Vantaggi:
• Facile utilizzo
• Un unico utensile per più grandezze
Advantages:
• with Hexagon Drive
• to be used by hand or cordless powertool
• no adjustment by hand while assembling
• handy, even in awkward places
Vantaggi:
• Con attacco esagonale
• Per uso a mano o per uso con avvitatori a batteria
• Nessun tipo di regolazione a mano durante l’impiego
• A mano per uso anche in luoghi ristretti
40
INSERTING TOOLS
UTENSILI PER IL MONTAGGIO
Inserting Tools with locking ring
Utensili per il Montaggio manuale con anello d'arresto
Inserting Tools with Hexagon Drive
Utensile per il Montaggio con attacco esagonale
42
43 - 44
Machine Inserting Tool
Utensile per il Montaggio a Macchina
45
Tang Break Tools
Attrezzi rottura codolo
46
Extracting Tools
Estrattori
46
41
Inserting Tools
with locking ring
Utensili per il Montaggio manuale
con anello d'arresto
Metric
UNC / UNF
Metrico
BSW / BSF
2
M 2 x 0.4
M 2.2 x 0.45
UNC
3
M 2.5 x 0.45
No.
Art.No.
No. 2
€
08002
5,70
08003
5,70
08004
5,70
4
M
3 x 0.5
UNC
No. 5
UNC/UNF No. 4
5
M 3.5 x 0.6
UNC/UNF No. 6
08005
5,70
6
M
UNC/UNF
BSW 3/16
UNC
UNF
UNC
UNC/UNF
BSW/BSF
No. 8
08006
5,70
No. 10
No. 10
No. 12
1/4
1/4
08007
5,70
08008
5,70
08009
5,70
UNC/BSW 5/16
08010
6,50
UNF/BSF 5/16
08011
6,50
UNC/BSW 3/8
08012
7,00
UNF/BSF
UNC/UNF
BSW/BSF
UNC/UNF
BSW/BSF
UNC/UNF
BSW/BSF
3/8
7/16
7/16
1/2
1/2
9/16
9/16
08013
7,00
08014
8,20
08015
8,20
08016
9,80
08017
9,80
UNC/UNF
BSW/BSF
UNC
BSW/BSF
5/8
5/8
3/4
3/4
08018
10,80
08020
10,80
UNF
UNC/UNF
BSW/BSF
UNC/UNF
BSW/BSF
3/4
7/8
7/8
1"
1"
08021
10,80
08022
13,60
08023
13,60
4 x 0.7
7
8
M
5 x 0.8
9
M
6 x 1.0
10
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
7 x 1.0
8 x 1.25
8 x 1.0
9 x 1.25
9 x 1.0
10 x 1.5
10 x 1.0
11 x 1.5
11 x 1.25
12 x 1.75
12 x 1.25
14 x 2.0
14 x 1.5
14 x 1.25
14 x 1.0
16 x 2.0
16 x 1.5
18 x 2.5
18 x 2.0
20 x 2.5
20 x 2.0
22 x 2.5
22 x 2.0
24 x 3.0
24 x 2.0
11
12
13
14
15
16
17
18
20
21
22
23
42
M 10 x 1.25
M 12 x 1.5
M 12 x 1.0
M 18 x 1.5
M 20 x 1.5
M 22 x 1.5
M 24 x 1.5
BSW 1/8
BSF 3/16
Inserting Tools
with Hexagon Drive
Utensile per il Montaggio
con attacco esagonale
Nominal
Art.No.
€
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
08090
08091
08092
08093
08094
08095
08096
08097
08024
08025
08026
08027
08028
08029
08030
08031
08032
08033
08034
08035
08036
08037
08038
08039
08040
08041
08042
08043
08044
08045
08046
08047
08048
08049
5,70
5,70
5,70
5,70
5,70
6,50
7,00
8,20
15,50
15,50
15,50
15,50
15,50
18,60
18,60
18,60
21,60
21,60
21,60
21,60
21,60
21,60
30,00
30,00
30,00
35,00
35,00
35,00
35,00
37,00
37,00
42,00
42,00
42,00
1/4"
1/4"
1/4"
1/4"
1/2"
1/2"
1/2"
1/2"
08080
08081
08082
08083
08084
08085
08086
08087
9,30
9,30
10,80
12,40
15,50
15,50
21,60
21,60
Diameter D
M
M 2.5 x 0.45
M 3 x 0.5
M 4 x 0.7
M 5 x 0.8
M 6 x 1.0
M 8 x 1.25
M 10 x 1.5
M 12 x 1.75
M 26 x 1.5
M 27 x 3.0
M 27 x 2.0
M 27 x 1.5
M 28 x 1.5
M 30 x 3.5
M 30 x 2.0
M 30 x 1.5
M 33 x 3.5
M 33 x 2.0
M 36 x 4.0
M 36 x 3.0
M 36 x 2.0
M 36 x 1.5
M 39 x 4.0
M 39 x 3.0
M 40 x 3.0
M 42 x 4.5
M 42 x 3.0
M 45 x 4.5
M 45 x 3.0
M 48 x 5.0
M 48 x 3.0
M 50 x 3.0
M 52 x 5.0
M 52 x 3.0
G (BSP)
1/8 x 28
1/4 x 19
3/8 x 19
1/2 x 14
5/8 x 14
3/4 x 14
7/8 x 14
1" x 11
43
Inserting Tools
with Hexagon Drive
Utensile per il Montaggio
con attacco esagonale
Nominal
Art.No.
€
1/2"
1/2"
1/2"
1/2"
08050
08051
08052
08053
18,60
18,60
21,60
21,60
1/2"
1/2"
1/2"
1/2"
08060
08061
08062
08063
18,60
18,60
21,60
21,60
1/2"
1/2"
1/2"
1/2"
3/4"
3/4"
3/4"
3/4"
08741
08742
08743
08744
08745
08746
08747
08748
18,60
18,60
21,60
21,60
35,00
40,00
42,00
49,50
Diameter D
UNC
1.1/8 x 7.0
1.1/4 x 7.0
1.3/8 x 6.0
1.1/2 x 6.0
UNF
1.1/8 x 12
1.1/4 x 12
1.3/8 x 12
1.1/2 x 12
UNx8
1.1/8 x 8
1.1/4 x 8
1.3/8 x 8
1.1/2 x 8
1.5/8 x 8
1.3/4 x 8
1.7/8 x 8
2" x 8
44
Machine Inserting Tool
with 1/4" Hexagon Drive
Utensile per il Montaggio a Macchina
con attacco esagonale 1/4"
Nominal
L1
Art.No.
€
08070
08071
08072
08073
08074
08075
08076
8,00
8,00
8,00
8,00
9,80
10,80
12,00
Diameter D
M
M 3 x 0.5
M 4 x 0.7
M 5 x 0.8
M 6 x 1.0
M 8 x 1.25
M 10 x 1.5
M 12 x 1.75
46
56
62
76
85
96
107
6
7
8
10
12
14
16
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
45
Tang Break Tools
Attrezzi rottura codolo
No.
Metric
UNC / UNF
Metrico
M 2.2 x 0.45
BSW / BSF
UNC
No. 2
M 8 x 1.25
M 9 x 1.25
UNC/UNF
UNC/UNF
UNC
UNC/UNF
UNF
UNC
UNC/UNF
UNC/UNF
BSW/BSF
UNC
No. 4
No. 6
No. 10
No. 8
No. 10
No. 12
1/4
5/16
5/16
3/8
M 10 x 1.25
M 11 x 1.25
M 12 x 1.5
M 12 x 1.0
UNF
UNC/UNF
UNC/UNF
BSW/BSF
3/8
7/16
1/2
1/2
2
3
4
5
M 2 x 0.4
M 2.5 x 0.45
M 3 x 0.5
M 3.5 x 0.6
6
M
4 x 0.7
8
9
M
M
M
M
M
M
M
M
M
M
5 x 0.8
6 x 1.0
7 x 1.0
8 x 1.0
9 x 1.0
10 x 1.5
10 x 1.0
11 x 1.5
12 x 1.75
12 x 1.25
11
12
13
14
15
V-COIL rapid
3
M 2,5 x 0.45
4
M 3 x 0.5
6
M 4 x 0.7
8
M 5 x 0.8
9
M 6 x 1.0
11
M 8 x 1.25
13
M 10 x 1.5
15
M 12 x 1.75
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
Art.No.
€
07002
07003
07004
07005
2,40
2,40
2,40
2,40
BSF 3/16
07006
2,40
BSW 3/16
BSW/BSF 1/4
07008
07009
2,40
2,40
BSW/BSF 3/8
07011
07012
2,70
2,70
BSW/BSF 7/16
07013
07014
2,70
3,25
07015
3,25
07090
07091
07092
07093
07094
07095
07096
07097
2,40
2,40
2,40
2,40
2,40
2,70
2,70
3,25
Extracting Tools
Estrattori
No.
Metric
Inch
Metrico
pollice
2
M
3
M 11 - M 24
46
3 - M 10
Art.-No.
€
3/16 - 3/8
07052
12,00
3/8 - 1"
07053
14,60
STI-TAPS
MASCHI STI
M
MF
BSW
BSF
UNC
UNF
UNX8
G
BSP
Second Lead (Form D)
Imbocco Forma D
48
52
50
54
Sets of 2 pcs.
Set di 2 pz.
49
51
53
Spiral Point
Imbocco coretto
56
Spiral Flute
Elicoidali
57
Spark Plug Taps
Maschi combinati STI per candele
55
Fluteless Taps
Maschi a rullare
58
STI-Drills
Punte STI
61
V-COIL rapid + AUTOMOTIVE
STI-Taps
Maschi STI
59
STI-Drills
Punte STI
59
HexTap OS
HexTap SP
HexTap LS
60
60
60
Oil Drain Screws
Tappo di scarico dell'olio
62
Retainer Ring OS
anelli di tenuta
62
47
STI-Taps (Second Lead)
for Wire-Thread-Inserts ISO 2 (6H)
Maschi STI
per inserti riportati dopo ISO 2 (6H)
Form D
Nominal
Diameter D
M 2
M 2.5
M 3
M 3.5
M 4
M 5
M 6
M 7
M 8
M 8
M 9
M 10
M 10
M 10
M 11
M 12
M 12
M 12
M 12
M 14
M 14
M 14
M 14
M 16
M 16
M 18
M 18
M 18
M 20
M 20
M 20
M 22
M 22
M 22
M 24
M 24
M 24
48
HSS-G
M
Tol. ISO1 (4H)
P
B
L1
L2
D2
x 0.40
x 0.45
x 0.5
x 0.6
x 0.7
x 0.8
x 1.0
x 1.0
x 1.25
x 1.0
x 1.25
x 1.5
x 1.25
x 1.0
x 1.5
x 1.75
x 1.5
x 1.25
x 1.0
x 2.0
x 1.5
x 1.25
x 1.0
x 2.0
x 1.5
x 2.5
x 2.0
x 1.5
x 2.5
x 2.0
x 1.5
x 2.5
x 2.0
x 1.5
x 3.0
x 2.0
x 1.5
2.5
3.1
3.6
4.3
4.9
6.0
7.3
8.3
9.6
9.3
10.6
11.9
11.6
11.3
12.9
14.3
14.0
13.6
13.3
16.6
16.0
15.6
15.3
18.6
18.0
21.3
20.6
20.0
23.3
22.6
22.0
25.3
24.6
24.0
27.9
26.6
26.0
44.5
48.0
53.0
53.0
58.0
66.0
72.0
72.0
80.0
80.0
85.0
89.0
85.0
85.0
89.0
95.0
95.0
95.0
95.0
102.0
102.0
102.0
102.0
112.0
104.0
118.0
104.0
104.0
118.0
113.0
113.0
130.0
120.0
120.0
138.0
127.0
120.0
9.5
11.0
13.0
13.0
16.0
19.0
22.0
22.0
24.0
24.0
25.0
29.0
25.0
25.0
29.0
30.0
30.0
30.0
30.0
32.0
32.0
32.0
32.0
37.0
29.0
38.0
29.0
29.0
38.0
33.0
33.0
45.0
35.0
35.0
48.0
37.0
35.0
2.8
3.15
4.0
4.5
5.0
6.3
8.0
9.0
10.0
10.0
8.0
9.0
8.0
8.0
9.0
11.2
11.2
11.2
11.2
12.5
12.5
12.5
12.5
14.0
14.0
16.0
14.0
14.0
16.0
16.0
16.0
18.0
18.0
18.0
20.0
20.0
18.0
2.24
2.50
3.15
3.55
4.00
5.00
6.30
7.10
8.00
8.00
6.30
7.10
6.30
6.30
7.10
9.00
9.00
9.00
9.00
10.00
10.00
10.00
10.00
11.20
11.20
12.50
11.20
11.20
12.50
12.50
12.50
14.00
14.00
14.00
16.00
16.00
14.00
Art.-No.
€
03001
03003
03005
03006
03007
03008
03009
03010
03011
03012
03013
03015
03016
03017
03018
03020
03021
03022
03023
03027
03028
03029
03030
03033
03034
03035
03036
03037
03038
03039
03040
03041
03042
03043
03044
03045
03046
6,60
6,60
5,80
5,80
5,80
5,80
5,80
7,20
7,20
7,20
8,80
8,80
8,80
8,80
10,00
10,00
12,20
12,20
12,20
13,90
13,90
13,90
13,90
17,50
17,50
22,00
22,00
22,00
24,30
24,30
24,30
28,00
28,00
28,00
35,30
35,30
35,30
STI-Taps, set of 2 pcs.
for Wire-Thread-Inserts ISO 2 (6H)
Maschi STI, Set di 2 pz.
per inserti riportati dopo ISO 2 (6H)
Nominal
Diameter D
M 26
M 27
M 27
M 27
M 28
M 30
M 30
M 30
M 33
M 33
M 36
M 36
M 36
M 36
M 39
M 39
M 40
M 42
M 42
M 45
M 45
M 48
M 48
M 50
M 52
M 52
HSS-G
M
Tol. ISO1 (4H)
P
B
L1
L2
D2
x 1.5
x 3.0
x 2.0
x 1.5
x 1.5
x 3.5
x 2.0
x 1.5
x 3.5
x 2.0
x 4.0
x 3.0
x 2.0
x 1.5
x 4.0
x 3.0
x 3.0
x 4.5
x 3.0
x 4.5
x 3.0
x 5.0
x 3.0
x 3.0
x 5.0
x 3.0
28.0
30.9
29.6
29.0
30.0
34.6
32.6
32.0
37.6
35.6
41.2
39.9
38.6
38.0
44.2
42.9
43.9
47.9
45.9
50.9
48.9
54.5
51.9
53.9
58.5
55.9
127
151
127
127
127
162
137
137
162
144
170
170
150
150
187
149
149
187
165
200
175
200
175
175
221
193
37
51
37
37
37
57
37
37
57
37
60
60
39
39
67
39
39
67
45
70
45
70
45
45
76
48
20.0
22.4
20.0
20.0
20.0
25.0
22.4
22.4
25.0
25.0
28.0
28.0
28.0
28.0
31.5
28.0
28.0
31.5
31.5
35.5
35.5
35.5
35.5
35.5
40.0
40.0
16.0
18.0
16.0
16.0
16.0
20.0
18.0
18.0
20.0
20.0
22.4
22.4
22.4
22.4
28.0
26.0
26.0
28.0
28.0
31.0
31.0
31.0
31.0
31.0
34.0
34.0
Art.-No.
€
03049
03050
03051
03052
03053
03054
03055
03056
03057
03058
03060
03061
03062
03063
03064
03065
03066
03067
03068
03069
03070
03071
03072
03073
03074
03075
115,00
115,00
115,00
115,00
115,00
151,00
151,00
151,00
158,00
158,00
175,00
175,00
175,00
175,00
270,00
230,00
230,00
380,00
250,00
380,00
290,00
470,00
320,00
350,00
650,00
550,00
49
STI-Taps (Second Lead)
for Wire-Thread-Inserts Tolerance 2B
Maschi STI
per inserti riportati dopo tolleranza 2B
Form D
Nominal
HSS-G
UNC/UNF
Tol. 3B
B
L1
L2
D2
2.8
3.7
4.0
4.5
5.2
6.2
6.9
8.0
9.8
11.6
13.5
15.2
17.0
18.9
22.4
25.9
29.5
48.0
53.0
53.0
58.0
62.0
66.0
66.0
72.0
80.0
85.0
95.0
102.0
112.0
112.0
118.0
130.0
138.0
10.0
13.0
13.0
16.0
17.0
19.0
19.0
22.0
24.0
25.0
30.0
32.0
37.0
37.0
38.0
45.0
48.0
3.15
4.0
4.0
5.0
5.6
6.3
7.1
8.0
10.0
8.0
11.2
12.5
14.0
14.0
16.0
18.0
20.0
3.5
4.3
5.1
5.9
7.5
9.3
10.9
12.8
14.4
16.1
17.7
21.1
24.6
28.2
27.8
53.0
53.0
62.0
66.0
69.0
76.0
82.0
84.0
90.0
104.0
104.0
104.0
120.0
127.0
127.0
13.0
13.0
17.0
19.0
19.0
20.0
22.0
24.0
25.0
29.0
29.0
29.0
35.0
37.0
37.0
4.0
4.5
5.6
6.3
8.0
10.0
8.0
9.0
11.2
12.5
14.0
14.0
18.0
20.0
20.0
Art.-No.
€
2.5
3.15
3.15
4.00
4.50
5.00
5.60
6.30
8.00
6.30
9.00
10.00
11.20
11.20
12.50
14.00
16.00
03100
03101
03102
03103
03104
03105
03106
03107
03108
03109
03110
03111
03112
03113
03114
03115
03116
8,80
8,80
8,80
8,80
8,80
8,80
8,80
5,80
6,30
6,60
8,80
10,00
16,60
20,50
24,90
36,00
36,00
3.15
3.55
4.50
5.00
6.30
8.00
6.30
7.10
9.00
10.00
11.20
11.20
14.00
16.00
16.00
03151
03152
03153
03154
03155
03156
03157
03158
03159
03160
03161
03162
03163
03164
03165
8,80
8,80
8,80
8,80
5,80
6,30
6,60
8,80
10,00
16,60
20,50
24,90
36,00
36,00
36,00
Diameter D
UNC/NC
No. 2 x 56
No. 4 x 40
No. 5 x 40
No. 6 x 32
No. 8 x 32
No. 10 x 24
No. 12 x 24
1/4 x 20
5/16 x 18
3/8 x 16
7/16 x 14
1/2 x 13
9/16 x 12
5/8 x 11
3/4 x 10
7/8 x 9
1" x 8
UNF/NF
No. 4 x 48
No. 6 x 40
No. 8 x 36
No. 10 x 32
1/4 x 28
5/16 x 24
3/8 x 24
7/16 x 20
1/2 x 20
9/16 x 18
5/8 x 18
3/4 x 16
7/8 x 14
1" x 12
1" x 14
50
STI-Taps, sets of 2 pcs.
for Wire-Thread-Inserts Tolerance 2B
Maschi STI, Set di 2 pz.
per inserti riportati dopo tolleranza 2B
HSS-G
Nominal
UNC/UNF
Tol. 3B
B
Art.-No.
L1
L2
D2
33.3
36.5
40.4
43.6
151
162
170
187
51
57
60
67
22.4
25.0
28.0
31.5
18.0
20.0
22.4
25.0
03117
03118
03119
03120
107,00
130,00
157,00
210,00
31.3
34.5
37.7
40.9
137
144
150
150
37
39
39
39
22.4
25.0
28.0
28.0
18.0
20.0
22.4
22.4
03166
03167
03168
03169
107,00
130,00
157,00
210,00
1.1/4
1.3/8
1.1/2
1.5/8
1.3/4
1.7/8
2"
2.1/8
151
162
170
170
187
187
200
200
51
57
60
60
67
67
70
70
22.4
25.0
28.0
28.0
31.5
31.5
35.5
35.5
18.0
20.0
22.4
22.4
25.0
25.0
28.0
28.0
03191
03192
03193
03194
03195
03196
03197
03198
107,00
130,00
157,00
210,00
220,00
320,00
320,00
635,00
€
Diameter D
UNC/NC
1.1/8 x 7
1.1/4 x 7
1.3/8 x 6
1.1/2 x 6
UNF/NF
1.1/8 x 12
1.1/4 x 12
1.3/8 x 12
1.1/2 x 12
UNx8
1.1/8 x 8
1.1/4 x 8
1.3/8 x 8
1.1/2 x 8
1.5/8 x 8
1.3/4 x 8
1.7/8 x 8
2" x 8
51
STI-Taps (Second Lead)
for Wire-Thread-Inserts
Maschi STI
per inserti riportati
Form D
Nominal
BSW/BSF
HSS-G
B
Art.-No.
L1
L2
D2
3.9
6.0
7.8
9.6
11.4
13.2
15.2
16.8
18.6
20.2
22.0
25.5
29.1
53.0
56.0
72.0
80.0
85.0
95.0
102.0
102.0
112.0
112.0
118.0
130.0
138.0
13.0
19.0
22.0
24.0
25.0
30.0
32.0
32.0
37.0
37.0
38.0
45.0
48.0
4.0
6.3
8.0
10.0
8.0
11.2
12.5
12.5
14.0
14.0
16.0
18.0
20.0
3.15
5.00
6.30
8.00
6.30
9.00
10.00
10.00
11.20
11.20
12.50
14.00
16.00
03201
03202
03203
03204
03205
03206
03207
03208
03209
03210
03211
03212
03213
5,80
5,80
5,80
6,30
6,60
8,80
10,00
16,60
20,50
24,90
24,90
36,00
36,00
5.7
7.5
9.3
11.0
12.8
14.6
16.2
18.0
19.6
21.5
24.9
28.4
66.0
72.0
80.0
85.0
89.0
95.0
102.0
112.0
112.0
118.0
130.0
138.0
19.0
22.0
24.0
25.0
29.0
30.0
32.0
37.0
37.0
38.0
45.0
48.0
6.3
8.0
10.0
8.0
9.0
11.2
12.5
14.0
14.0
16.0
18.0
20.0
5.00
6.30
8.00
6.30
7.10
9.00
10.00
11.20
11.20
12.50
14.00
16.00
03251
03253
03255
03256
03257
03258
03259
03260
03261
03262
03264
03265
5,80
5,80
6,30
6,60
8,80
10,00
16,60
20,50
24,90
24,90
36,00
36,00
€
Diameter D
BSW
1/8 x 40
3/16 x 24
1/4 x 20
5/16 x 18
3/8 x 16
7/16 x 14
1/2 x 12
9/16 x 12
5/8 x 11
11/16 x 11
3/4 x 10
7/8 x 9
1" x 8
BSF
3/16 x 32
1/4 x 26
5/16 x 22
3/8 x 20
7/16 x 18
1/2 x 16
9/16 x 16
5/8 x 14
11/16 x 14
3/4 x 12
7/8 x 11
1" x 10
52
STI-Taps, sets of 2 pcs.
for Wire-Thread-Inserts
Maschi STI, Set di 2 pz.
per inserti riportati
G (BSP)
HSS-G
Nominal
B
L1
L2
D2
59
67
75
87
91
96
102
109
15
19
21
26
26
28
29
33
8.0
11.2
14.0
16.0
18.0
20.0
22.4
25.0
Art.-No.
€
03311
03312
03313
03314
03315
03316
03318
03317
16,50
21,00
27,30
44,50
65,20
65,20
104,00
104,00
Diameter D
G (BSP)
1/8 x 28
1/4 x 19
3/8 x 19
1/2 x 14
5/8 x 14
3/4 x 14
7/8 x 14
1" x 11
10.8
14.7
18.3
23.1
25.1
28.6
32.4
36.0
6.3
9.0
11.2
12.5
14.0
16.0
18.0
20.0
53
STI-Taps (Second Lead)
for Wire-Thread-Inserts
Maschi STI
per inserti riportati
Form D
Nominal
HSS-G
B
Art.-No.
L1
L2
D2
10.8
14.7
18.3
23.1
25.0
28.6
36.0
59.0
67.0
75.0
87.0
91.0
96.0
109.0
15.0
19.0
21.0
26.0
26.0
28.0
33.0
8.0
11.2
14.0
16.0
18.0
20.0
25.0
6.30
9.00
11.20
12.50
14.00
16.00
20.00
03301
03302
03303
03304
03305
03306
03307
8,30
10,50
13,60
22,20
32,60
32,60
52,00
7.1
5.6
4.4
3.4
66.0
66.0
53.0
50.0
19.0
19.0
13.0
13.0
7.1
6.3
4.5
3.55
5.60
5.00
3.55
2.80
03321
03323
03325
03327
5,80
5,80
5,80
5,80
7.5
9.1
10.7
12.3
13.9
69.0
76.0
82.0
84.0
90.0
19.0
20.0
22.0
24.0
25.0
8.0
10.0
8.0
9.0
11.2
6.30
8.00
6.30
7.10
9.00
03341
03342
03343
03344
03345
7,50
8,30
8,80
11,20
16,50
€
Diameter D
G (BSP)
1/8 x 28
1/4 x 19
3/8 x 19
1/2 x 14
5/8 x 14
3/4 x 14
1" x 11
BA
BA 0
BA 2
BA 4
BA 6
BS. Brass
1/4 x 26
5/16 x 26
3/8 x 26
7/16 x 26
1/2 x 26
54
STI-Spark Plug Taps with Pilot Nose
for Wire-Thread-Inserts ISO 2 (6H)
Maschi combinati STI per candele
per inserti riportati dopo ISO 2 (6H)
HSS-G
Nominal
Diameter D
M 6
M 8
M 10
M 10
M 10
M 12
M 14
M 18
M
Tol. ISO 1 (4H)
P
x 1.0
x 1.25
x 1.5
x 1.25
x 1.0
x 1.25
x 1.25
x 1.5
B1
B2
L3
L2
L1
D2
7.3
9.6
11.9
11.6
11.3
13.6
15.6
20.0
6
8
10
10
10
12
14
18
7
9
9
8
8
9
10
10
28
32
37
30
30
32
45
47
70
75
80
74
74
75
90
116
8
8
9
8
8
9
12
16
6.3
6.3
7.1
6.3
6.3
7.1
9.2
12.5
Art.-No.
€
03630
03631
03632
03637
03633
03634
03635
03636
11,00
12,00
15,40
15,40
15,40
20,00
23,20
33,20
55
STI-Machine Taps (Spiral Point)
for Wire-Thread-Inserts ISO 2 (6H)
Maschi STI a Macchina con imbocco coretto
per inserti riportati dopo ISO 2 (6H)
Form B
Nominal
Diameter D
M 3
M 3.5
M 4
M 5
M 6
M 7
M 8
M 8
M 10
M 10
M 12
M 12
M 12
M 14
M 14
M 14
M 16
56
HSS-E
M
Tol. ISO 1 (4H)
P
B
L1
L2
D2
x 0.5
x 0.6
x 0.7
x 0.8
x 1.0
x 1.0
x 1.25
x 1.0
x 1.5
x 1.0
x 1.75
x 1.5
x 1.25
x 2.0
x 1.5
x 1.25
x 2.0
3.6
4.3
4.9
6.0
7.3
8.3
9.6
9.3
11.9
11.3
14.3
14.0
13.6
16.6
16.0
15.6
18.6
53.0
53.0
58.0
66.0
72.0
72.0
80.0
80.0
89.0
85.0
95.0
95.0
95.0
102.0
102.0
102.0
112.0
13.0
13.0
16.0
19.0
22.0
22.0
24.0
24.0
29.0
25.0
30.0
30.0
30.0
32.0
32.0
32.0
37.0
4.0
4.5
5.0
6.3
8.0
9.0
10.0
10.0
9.0
8.0
11.2
11.2
11.2
12.5
12.5
12.5
14.0
3.15
3.55
4.00
5,00
6.40
7.10
8.00
8.00
7.10
6.30
9.00
9.00
9.00
10.00
10.00
10.00
11.20
Art.-No.
€
03505
03506
03507
03508
03509
03510
03511
03512
03515
03517
03520
03521
03522
03527
03528
03529
03533
6,60
6,60
6,60
7,50
7,80
9,50
9,50
9,50
12,00
12,00
18,00
18,30
18,30
21,50
21,50
21,50
22,50
STI-Machine Taps (Spiral Flute)
for Wire-Thread-Inserts ISO 2 (6H)
Maschi STI a Macchina Elicoidali
per inserti riportati dopo ISO 2 (6H)
Form C/35°RSP
Nominal
Diameter D
M 3
M 3.5
M 4
M 5
M 6
M 7
M 8
M 8
M 10
M 10
M 12
M 12
M 12
M 14
M 14
M 14
M 16
P
x 0.5
x 0.6
x 0.7
x 0.8
x 1.0
x 1.0
x 1.25
x 1.0
x 1.5
x 1.0
x 1.75
x 1.5
x 1.25
x 2.0
x 1.5
x 1.25
x 2.0
HSS-E
B
3.6
4.3
4.9
6.0
7.3
8.3
9.6
9.3
11.9
11.3
14.3
14.0
13.6
16.6
16.0
15.6
18.6
M
Tol. ISO 1 (4H)
L1
L2
D2
53.0
53.0
58.0
66.0
72.0
72.0
80.0
80.0
89.0
85.0
95.0
95.0
95.0
102.0
102.0
102.0
112.0
13.0
13.0
16.0
19.0
22.0
22.0
24.0
24.0
29.0
25.0
30.0
30.0
30.0
32.0
32.0
32.0
37.0
4.0
4.5
5.0
6.3
8.0
9.0
10.0
10.0
9.0
8.0
11.2
11.2
11.2
12.5
12.5
12.5
14.0
3.15
3.55
4.00
5,00
6.40
7.10
8.00
8.00
7.10
6.30
9.00
9.00
9.00
10.00
10.00
10.00
11.20
Art.-No.
€
03705
03706
03707
03708
03709
03710
03711
03712
03715
03717
03720
03721
03722
03727
03728
03729
03733
6,60
6,60
6,60
7,20
7,50
9,50
9,50
9,50
11,40
11,40
18,00
18,30
18,30
21,30
21,30
21,30
22,50
57
STI-Fluteless Taps
for Wire-Thread-Inserts ISO 2 (6H)
Maschi a rullare STI
per inserti riportati dopo ISO 2 (6H)
HSS-E
Nominal
M
Tol. ISO 1 (4H)
P
B
L1
L2
D2
53.0
58.0
66.0
72.0
80.0
89.0
95.0
13.0
16.0
19.0
22.0
24.0
29.0
30.0
4.0
5.0
6.3
8.0
10.0
9.0
11.2
Art.-No.
€
03605
03607
03608
03609
03611
03615
03620
10,00
10,80
10,80
12,40
14,90
17,60
24,90
Diameter D
x 0.5
x 0.7
x 0.8
x 1.0
x 1.25
x 1.5
x 1.75
M 3
M 4
M 5
M 6
M 8
M 10
M 12
3.6
4.9
6.0
7.3
9.6
11.9
14.3
3.15
4.00
5,00
6.40
8.00
7.10
9.00
RECOMMENDED CORE HOLE DIAMETER
PREFORI PER MASCHI RACCOMANDATO
58
D
M3
M4
M5
M6
M8
M 10
M 12
Ø
3,4
4,6
5,6
6,8
9,0
11,2
13,4
STI-Taps V-COIL rapid
for Wire-Thread-Inserts ISO 2 (6H)
Maschi STI V-COIL rapid
per inserti riportati dopo ISO 2 (6H)
Form D
Nominal
HSS-G
M
Tol. ISO 1 (4H)
B
L1
L2
3.1
3.6
4.9
6.0
7.3
9.6
11.9
14.3
36.0
36.0
36.0
36.0
36.0
42.0
50.0
50.0
11.0
11.0
13.0
16.0
17.0
20.0
24.0
29.0
Art.-No.
€
03090
03091
03092
03093
03094
03095
03096
03097
3,50
3,50
3,70
3,70
5,40
7,30
9,70
10,50
Art.-No.
€
Diameter D
M 2.5 x 0.45
M 3 x 0.5
M 4 x 0.7
M 5 x 0.8
M 6 x 1.0
M 8 x 1.25
M 10 x 1.5
M 12 x 1.75
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
STI-Drills V-COIL rapid
Punte STI V-COIL rapid
Nominal
L1
S2
36.0
36.0
36.0
46.0
46.0
46.0
50.0
50.0
16.0
16.0
16.0
26.0
26.0
26.0
33.5
33.5
Diameter D
2.6 mm
3.2 mm
4.2 mm
5.2 mm
6.3 mm
8.3 mm
10.4 mm
12.4 mm
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
03080
03081
03082
03083
03084
03085
03086
03087
3,60
3,60
3,60
3,60
3,60
4,60
6,00
7,10
59
HexTap OS
for oil drain screw threads
HexTap OS
per filetti do parafuso de drenagem do òleo
Multi-Drive
HSS-G
Tol. ISO2 (6H)
Nominal
Typ
L1
L2
SW 1
SW 2
Diameter D
M 13 x 1.5
M 15 x 1.5
M 17 x 1.5
M 20 x 1.5
M 24 x 1.5
OS
OS
OS
OS
OS
50
50
50
50
50
21
21
21
21
21
16
16
16
16
16
4
4
5
6
8
Art.-No.
€
19002
19003
19004
19005
19006
17,50
17,50
20,00
24,00
29,00
Art.-No.
€
19001
29,50
HexTap SP
for spark plug thread M 14x1,25
HexTap SP
per filetti della candela di accensione M 14x1,25
Multi-Drive
HSS-G
Tol. ISO2 (6H)
Nominal
Typ
L1
L2
SW 1
SW 2
Diameter D
M 16 x 1.25
SP
70
41
16
4
HexTap LS
for oxygen sensor thread M 18x1,5
HexTap LS
per filetti sonda Lambda M 18x1,5
LS
Multi-Drive
Nominal
Diameter D
M 18 x 1,5
M 20 x 1,5
60
HSS-G
LSN
Tol. ISO2 (6H)
Typ
L1
L2
SW 1
SW 2
LSN
LS
40
50
27
21
14
14
6,3
6,3
Art.-No.
€
19008
19007
18,00
25,00
STI-Drills
Punte STI
Nominal
Art.No.
€
VC 021
VC 023
VC 024
VC 026
VC 030
VC 031
VC 032
VC 034
VC 037
VC 038
VC 042
VC 044
VC 045
VC 050
VC 051
VC 052
VC 058
VC 059
VC 060
VC 062
VC 063
VC 066
VC 067
VC 073
VC 083
VC 093
VC 098
VC 099
VC 103
VC 104
VC 114
VC 115
VC 116
VC 123
VC 124
VC 130
0,80
0,80
0,80
1,00
1,00
1,10
1,10
1,10
1,15
1,15
1,30
1,30
1,30
1,40
1,70
1,70
1,90
1,90
1,90
2,20
2,20
2,40
2,40
2,70
4,20
4,20
4,60
4,60
6,00
6,00
7,60
7,60
7,60
9,50
9,50
9,50
Diameter D
2.1 mm
2.3 mm
2.4 mm
2.6 mm
3.0 mm
3.1 mm
3.2 mm
3.4 mm
3.7 mm
3.8 mm
4.2 mm
4.4 mm
4.5 mm
5.0 mm
5.1 mm
5.2 mm
5.8 mm
5.9 mm
6.0 mm
6.2 mm
6.3 mm
6.6 mm
6.7 mm
7.3 mm
8.3 mm
9.3 mm
9.8 mm
9.9 mm
10.3 mm
10.4 mm
11.4 mm
11.5 mm
11.6 mm
12.3 mm
12.4 mm
13.0 mm
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
5
5
5
5
5
5
5
5
61
Oil Drain Screws
for oil sump threads
Tappo di scarico dell'olio
per filetti de drenagem do òleo
A
B
Nominal
Type
Piece
Art.-No.
price
Diameter D
M 13 x 1.5
M 15 x 1.5
M 17 x 1.5
M 20 x 1.5
M 24 x 1.5
Tipo
A
A
B
B
B
pezzo
10
10
10
10
10
19130
19131
19132
19133
19134
€
26,00
26,00
26,00
26,00
26,00
Retainer Ring OS
for oil drain screws
from copper (CU) and aluminium (ALU)
anelli di tenuta OS
per tappo di scarico dell'olio
di rame (CU) ed aluminio (Alu)
Size
15 x 19 x 1.5 mm
17 x 21 x 1.5 mm
20 x 24 x 1.5 mm
20 x 24 x 1.5 mm
24 x 29 x 2.0 mm
24 x 29 x 2.0 mm
62
Type
for screws
Piece
Tipo
per vite
pezzo
CU
CU
CU
ALU
CU
ALU
M 13 x 1.5 M 15 x 1.5
M 17 x 1.5
M 20 x 1.5
M 20 x 1.5
M 24 x 1.5
M 24 x 1.5
25
25
25
25
25
25
Art.-No.
19140
19141
19142
19143
19144
19145
price
€
8,00
8,00
8,00
7,50
8,00
7,50
RECOMMENDED TAPPING DRILL SIZES V-COIL
PREFORI PER MASCHI RACCOMANDATO V-COIL
D
P
Ø
D
mm
2 x 0.4
2.5 x 0.45
3 x 0.5
3.5 x 0.6
4 x 0.7
5 x 0.8
6 x 1.0
7 x 1.0
8 x 1.25
8 x 1.0
9 x 1.25
10 x 1.5
10 x 1.25
10 x 1.0
11 x 1.5
12 x 1.75
12 x 1.5
12 x 1.25
12 x 1.0
14 x 2.0
14 x 1.5
14 x 1.25
14 x 1.0
16 x 2.0
16 x 1.5
18 x 2.5
18 x 2.0
18 x 1.5
20 x 2.5
20 x 2.0
20 x 1.5
22 x 2.5
22 x 2.0
22 x 1.5
24 x 3.0
24 x 2.0
24 x 1.5
26 x 1.5
27 x 1.5
27 x 2.0
27 x 3.0
28 x 1.5
30 x 1.5
30 x 2.0
30 x 3.5
33 x 2.0
33 x 3.5
36 x 1.5
36 x 2.0
36 x 3.0
36 x 4.0
2.10
2.60
3.20
3.70
4.20
5.20
6.30
7.30
8.30
8.30
9.30
10.40
10.30
10.30
11.40
12.40
12.40
12.30
12.30
14.50
14.40
14.40
14.30
16.50
16.40
18.60
18.50
18.50
20.60
20.50
20.50
22.60
22.50
22.50
24.75
24.50
24.50
26.50
27.50
27.50
27.75
28.50
30.50
30.50
31.00
33.50
34.00
36.50
36.50
37.00
37.00
UNC
No.
2 x 56
No.
4 x 40
No.
5 x 40
No.
6 x 32
No.
8 x 32
No. 10 x 24
No. 12 x 24
1/4 x 20
5/16 x 18
3/8 x 16
7/16 x 14
1/2 x 13
9/16 x 12
5/8 x 11
3/4 x 10
7/8 x 9
1" x 8
1.1/8 x 7
1.1/4 x 7
1.3/8 x 6
1.1/2 x 6
M/MF
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
P
UNF
No.
No.
No.
No.
4 x 48
6 x 40
8 x 36
10 x 32
1/4 x 28
5/16 x 24
3/8 x 24
7/16 x 20
1/2 x 20
9/16 x 18
5/8 x 18
3/4 x 16
7/8 x 14
1" x 12
1.1/8 x 12
1.1/4 x 12
1.3/8 x 12
1.1/2 x 12
Ø
mm
2.4
3.0
3.4
3.7
4.4
5.1
5.7
6.7
8.3
9.9
11.60
13.00
14.80
16.50
19.75
23.00
26.25
29.50
33.00
36.00
39.50
3.0
3.7
4.4
5.1
6.6
8.2
9.8
11.50
13.00
14.80
16.25
19.50
22.75
26.00
29.00
32.50
35.50
38.50
D
Ø
D
BSW
1/8 x 40
3/16 x 24
1/4 x 20
5/16 x 18
3/8 x 16
7/16 x 14
1/2 x 12
9/16 x 12
5/8 x 11
3/4 x 10
7/8 x 9
1" x 8
mm
3.4
5.1
6.7
8.3
9.9
11.6
13.0
14.8
16.7
20.0
23.0
26.5
G(BSP)
1/8 x 28
1/4 x 19
3/8 x 19
1/2 x 14
5/8 x 14
3/4 x 14
7/8 x 14
1" x 11
BSF
3/16 x 32
1/4 x 26
5/16 x 22
3/8 x 20
7/16 x 18
1/2 x 16
9/16 x 16
5/8 x 14
3/4 x 12
7/8 x 11
1" x 10
5.0
6.6
8.3
9.9
11.6
13.0
14.8
16.4
19.5
22.7
26.5
UNx8
1.1/8 x
1.1/4 x
1.3/8 x
1.1/2 x
1.5/8 x
1.3/4 x
1.78 x
2" x
P
8
8
8
8
8
8
8
8
P
Ø
mm
10.00
13.60
17.10
21.50
23.40
27.00
30.60
33.70
28.75
31.75
35.00
38.00
41.50
44.50
47.75
50.90
63
TECHNICAL DATA FOR WIRE-THREAD-INSERTS ACC. TO DIN 8140
DATI TECNICI FILETTI RIPORTATI DIN 8140
S (mm)
M
M 2 x 0.40
M 2.5 x 0.45
M 3 x 0.50
1D
3.80
4.52
5.25
1.5D
4.80
5.77
6.75
2D
5.80
7.02
8.25
M 3.5 x 0.60
M 4 x 0.70
M 5 x 0.80
M 6 x 1.00
M 7 x 1.00
M 8 x 1.25
M 8 x 1.00
M 9 x 1.25
M 9 x 1.00
M 10 x 1.50
M 10 x 1.25
M 10 x 1.00
M 11 x 1.50
M 11 x 1.25
M 12 x 1.75
M 12 x 1.50
M 12 x 1.25
M 14 x 2.00
M 14 x 1.50
M 14 x 1.25
M 16 x 2.00
M 16 x 1.50
M 18 x 2.50
M 18 x 2.00
M 20 x 2.50
M 20 x 2.00
M 20 x 1.50
M 22 x 2.50
M 22 x 2.00
M 22 x 1.50
M 24 x 3.00
M 24 x 2.00
M 27 x 3.00
M 27 x 2.00
M 30 x 3.50
M 30 x 3.00
M 33 x 3.50
M 36 x 4.00
M 36 x 3.00
M 39 x 4.00
M 42 x 4.50
M 42 x 3.00
6.20
7.15
8.60
10.50
11.50
13.62
12.50
14.62
13.50
16.75
15.62
14.50
17.75
16.62
19.87
18.75
17.62
23.00
20.75
19.62
25.00
22.75
29.25
27.00
31.25
29.00
26.75
33.25
31.00
28.75
37.50
33.00
40.50
36.00
45.75
43.50
48.75
54.00
49.50
57.00
62.25
55.50
7.95
9.15
11.10
13.50
15.00
17.62
16.50
19.12
18.00
21.75
20.62
19.50
23.25
22.12
25.87
24.75
23.62
30.00
27.75
26.62
33.00
30.75
38.25
36.00
41.25
39.00
36.75
44.25
42.00
39.75
49.50
45.00
54.00
49.50
60.75
58.50
65.25
72.00
67.50
76.50
83.25
76.50
9.70
11.15
13.60
16.50
18.50
21.62
20.50
23.62
22.50
26.75
25.62
24.50
28.75
27.62
31.87
30.75
29.62
37.00
34.75
33.62
41.00
38.75
47.25
45.00
51.25
49.00
46.75
55.25
53.00
50.75
61.50
57.00
67.50
63.00
75.75
73.50
81.75
90.00
85.50
96.00
104.25
97.50
S Drilling Length
T Tapping Length
R Installation Length
64
T (mm)
2.5D
3D
6.80
7.80
8.27
9.52
9.75 11.25
11.45
13.15
16.10
19.50
22.00
25.62
24.50
28.13
27.00
31.75
30.62
29.50
34.25
33.12
37.87
36.75
35.62
44.00
41.75
40.62
49.00
46.75
56.25
54.00
61.25
59.00
56.75
66.25
64.00
61.75
73.50
69.00
81.00
76.50
90.75
88.50
98.25
108.00
103.50
115.50
125.25
118.50
13.20
15.15
18.60
22.50
25.50
29.62
28.50
32.62
31.50
36.75
35.62
34.50
39.75
38.62
43.87
42.75
41.62
51.00
48.75
47.62
57.00
54.75
65.25
63.00
71.25
69.00
66.75
77.25
75.00
72.75
85.50
81.00
94.50
90.00
105.75
103.50
114.25
126.00
121.50
135.00
146.25
139.50
1D
3.40
4.07
4.75
1.5D
4.40
5.32
6.25
2D
5.40
6.57
7.75
5.60
6.45
7.80
9.50
10.50
12.37
11.50
13.37
12.50
15.25
14.37
13.50
16.25
15.37
18.12
17.25
16.37
21.00
19.25
18.37
23.00
21.25
26.75
25.00
28.75
27.00
25.25
30.75
29.00
27.25
34.50
31.00
37.50
34.00
42.25
40.50
45.25
50.00
46.50
53.00
57.75
52.50
7.35
8.45
10.30
12.50
14.00
16.37
15.50
17.87
17.00
20.25
19.37
18.50
21.75
20.87
24.12
23.25
22.37
28.00
26.25
25.37
31.00
29.25
35.75
34.00
38.75
37.00
35.25
41.75
40.00
38.25
46.50
43.00
51.00
47.50
57.25
55.50
61.25
68.00
64.50
72.50
78.75
73.50
9.10
10.45
12.80
15.50
17.50
20.37
19.50
22.37
21.50
25.25
24.37
23.50
27.25
26.37
30.12
29.25
27.37
35.00
33.25
32.37
39.00
37.25
44.75
43.00
48.75
47.00
45.25
52.75
51.00
49.25
58.50
55.00
64.50
61.00
72.25
70.50
78.25
86.00
82.50
92.00
99.75
94.50
R (mm)
2.5D
3D
6.40
7.40
7.82
9.07
9.25 10.75
10.85
12.45
15.30
18.50
21.00
24.37
23.50
26.87
26.00
30.25
29.37
28.50
32.75
31.87
36.12
35.25
34.37
42.00
40.25
39.37
47.00
45.25
53.75
52.00
58.75
57.00
55.25
63.75
62.00
60.25
70.50
67.00
78.00
74.50
87.25
85.50
94.75
104.00
100.50
111.50
120.75
115.50
12.60
14.45
17.80
21.50
24.50
28.37
27.50
31.37
30.50
35.25
34.37
33.50
38.25
37.37
42.12
41.25
40.37
49.00
47.25
46.37
55.00
53.25
62.75
61.00
68.75
67.00
65.25
74.75
73.00
71.25
82.50
79.00
91.50
88.00
102.25
100.50
111.25
122.00
118.50
131.00
141.75
136.50
1D
2.00
2.50
3.00
3.50
4.00
5.00
6.00
7.00
8.00
8.00
9.00
9.00
10.00
10.00
10.00
11.00
11.00
12.00
12.00
12.00
14.00
14.00
14.00
16.00
16.00
18.00
18.00
20.00
20.00
20.00
22.00
22.00
22.00
24.00
24.00
27.00
27.00
30.00
30.00
33.00
36.00
36.00
39.00
42.00
42.00
1.5D
3.00
3.75
2D
4.00
5.00
2.5D
5.00
6.25
3D
6.00
7.50
4.50
5.25
6.00
7.50
9.00
10.50
12.00
12.00
13.50
13.50
15.00
15.00
15.00
16.50
16.50
18.00
18.00
18.00
21.00
21.00
21.00
24.00
24.00
27.00
27.00
30.00
30.00
30.00
33.00
33.00
33.00
36.00
36.00
40.50
40.50
45.00
45.00
49.50
54.00
54.00
58.50
63.00
63.00
6.00
7.00
8.00
10.00
12.00
14.00
16.00
16.00
18.00
18.00
20.00
20.00
20.00
22.00
22.00
24.00
24.00
24.00
28.00
28.00
28.00
32.00
32.00
36.00
36.00
40.00
40.00
40.00
44.00
44.00
44.00
48.00
48.00
54.00
54.00
60.00
60.00
66.00
72.00
72.00
78.00
84.00
84.00
7.50
8.75
10.00
12.50
15.00
17.50
20.00
20.00
22.50
22.50
25.00
25.00
25.00
27.50
27.50
30.00
30.00
30.00
35.00
35.00
35.00
40.00
40.00
45.00
45.00
50.00
50.00
50.00
55.00
55.00
55.00
60.00
60.00
67.50
67.50
75.00
75.00
82.50
90.00
90.00
97.50
105.00
105.00
9.00
10.50
12.00
15.00
18.00
21.00
24.00
24.00
27.00
27.00
30.00
30.00
30.00
33.00
33.00
36.00
36.00
36.00
42.00
42.00
42.00
48.00
48.00
54.00
54.00
60.00
60.00
60.00
66.00
66.00
66.00
72.00
72.00
81.00
81.00
90.00
90.00
99.00
108.00
108.00
117.00
126.00
126.00
S Lunghezza del Foro
T Lunghezza della Maschiatura
R Lunghezza utile del Filetto Riportato
TECHNICAL DATA FOR WIRE-THREAD-INSERTS ACC. TO DIN 8140
DATI TECNICI FILETTI RIPORTATI DIN 8140
S (Inch / pollice)
UNF
T (Inch / pollice)
1D
.156
.179
.206
.227
.250
.289
.331
.411
.500
1.5D
.199
.229
.262
.290
.319
.371
.426
.536
.656
2D
.242
.278
.318
.352
.388
.453
.521
.661
.812
2.5D
.285
.328
.374
.414
.457
.535
.616
.786
.969
3D
.328
.377
.430
.477
.526
.617
.711
.911
1.125
3/8 - 24
7/16 - 20
1/2 - 20
9/16 - 18
5/8 - 18
3/4 - 16
7/8 - 14
1" - 12
1"1/8 - 12
1"1/4 - 12
1"3/8 - 12
1"1/2 - 12
.562
.662
.725
.811
.874
1.031
1.196
1.375
1.500
1.625
1.750
1.875
.750
.881
.975
1.093
1.187
1.406
1.634
1.875
2.062
2.250
2.438
2.625
.937
1.100
1.225
1.374
1.500
1.781
2.071
2.375
2.625
2.875
3.125
3.375
1.124
1.319
1.475
1.655
1.812
2.156
2.509
2.875
3.187
3.500
3.813
4.125
UNC
2 - 56
3 - 48
4 - 40
5 - 40
6 - 32
8 - 32
10 - 24
12 - 24
1/4 - 20
5/16 - 18
3/8 - 16
7/16 - 14
1/2 - 13
9/16 - 12
5/8 - 11
3/4 - 10
7/8 - 9
1" - 8
1"1/8 - 7
1"1/4 - 7
1"3/8 - 6
1"1/2 - 6
.166
.193
.224
.237
.279
.305
.377
.403
.475
.562
.656
.758
.846
.937
1.034
1.200
1.375
1.562
1.768
1.893
2.125
2.250
.209
.242
.280
.300
.348
.387
.472
.511
.600
.718
.844
.977
1.096
1.219
1.347
1.575
1.812
2.062
2.330
2.518
2.812
3.000
.252
.292
.336
.362
.417
.469
.567
.619
.725
.875
1.031
1.196
1.346
.1500
1.659
1.950
2.250
2.562
2.893
3.143
3.500
3.750
.295
.341
.392
.425
.486
.551
.662
.727
.850
1.031
1.219
1.415
1.596
1.781
1.972
2.325
2.687
3.062
3.455
3.768
4.187
4.500
2 - 64
3 - 56
4 - 48
5 - 44
6 - 40
8 - 36
10 - 32
1/4 - 28
5/16 - 24
S Drilling Length
T Tapping Length
R Installation Length
R (Inch / pollice)
1D
.141
.161
.185
.204
.225
.261
.299
.375
1.5D
.184
.210
.241
.267
.294
.343
.394
.500
2D
.227
.260
.297
.329
.363
.425
.489
.625
2.5D
.270
.310
.353
.391
.432
.507
.584
.750
3D
.313
.359
.409
.454
.501
.589
.679
.875
1D
.086
.099
.112
.125
.138
.164
.190
.250
1.5D
.129
.148
.168
.187
.207
.246
.285
.375
2D
.172
.198
.224
.250
.276
.328
.380
.500
2.5D
.215
.247
.280
.312
.345
.410
.475
.625
3D
.258
.297
.336
.375
.414
.492
.570
.750
1.312
1.537
1.725
1.936
2.124
2.531
2.946
3.375
3.750
4.125
4.500
4.875
.458
.521
.612
.675
.756
.819
.969
1.125
1.292
1.417
1.542
1.667
1.792
.614
.708
.831
.925
1.038
1.132
1.344
1.562
1.792
1.979
2.167
2.354
2.542
.771
.896
1.050
1.175
1.319
1.444
1.719
2.000
2.292
2.542
2.792
3.042
3.292
.927
1.083
1.269
1.425
1.600
1.757
2.094
2.437
2.792
3.104
3.417
3.729
4.042
1.083
1.271
1.487
1.675
1.881
2.069
2.469
2.875
3.292
3.667
4.042
4.417
4.792
.312
.375
.437
.500
.562
.625
.750
.875
1.000
1.125
1.250
1.375
1.500
.469
.562
.656
.750
.844
.937
1.125
1.312
1.500
1.687
1.875
2.062
2.250
.625
.750
.875
1.000
1.125
.1250
1.500
1.750
2.000
2.250
2.500
2.750
3.000
.781
.937
1.094
1.250
1.406
1.562
1.875
2.187
2.500
2.812
3.125
3.437
3.750
.937
1.125
1.312
1.500
1.687
1.875
2.250
2.625
3.000
3.375
3.750
4.125
4.500
.338
.391
.448
.487
.555
.633
.757
.835
.975
1.187
1.406
1.633
1.846
2.062
2.284
2.700
3.125
3.562
4.018
4.393
4.875
5.250
.148
.172
.199
.212
.247
.273
.336
.362
.425
.507
.594
.687
.769
.854
.943
1.100
1.264
1.437
1.625
1.750
1.958
2.083
.191
.221
.255
.275
.316
.355
.431
.470
.550
.663
.781
.906
1.019
1.135
1.256
1.475
1.701
1.937
2.187
2.375
2.646
2.833
.234
.271
.311
.337
.385
.437
.526
.578
.675
.819
.969
1.125
1.269
1.417
1.568
1.850
2.139
2.437
2.750
3.000
3.333
3.583
.277
.320
.367
.400
.454
.519
.621
.686
.800
.975
1.156
1.344
1.519
1.698
1.881
2.225
2.576
2.937
3.312
3.625
4.021
4.333
.320
.370
.423
.462
.523
.601
.716
.794
.925
1.132
1.344
1.562
1.769
1.979
2.193
2.600
3.014
3.437
3.875
4.250
4.708
5.083
.086
.099
.112
.125
.138
.164
.190
.216
.250
.312
.375
.437
.500
.562
.625
.750
.875
1.000
1.125
1.250
1.375
1.500
.129
.148
.168
.187
.207
.246
.285
.324
.375
.469
.562
.656
.750
.844
.937
1.125
1.312
1.500
1.687
1.875
2.062
2.250
.172
.198
.224
.250
.276
.328
.380
.432
.500
.625
.750
.875
1.000
1.125
1.250
1.500
1.750
2.000
2.250
2.500
2.750
3.000
.215
.247
.280
.312
.345
.410
.475
.540
.625
.781
.937
1.094
1.250
1.406
1.562
1.875
2.187
2.500
2.812
3.125
3.437
3.750
.258
.297
.336
.375
.414
.492
.570
.648
.750
.937
1.125
1.312
1.500
1.687
1.875
2.250
2.625
3.000
3.375
3.750
4.125
4.500
S Lunghezza del Foro
T Lunghezza della Maschiatura
R Lunghezza utile del Filetto Riportato
65
TECHNICAL DATA FOR WIRE-THREAD-INSERTS ACC. TO DIN 8140
DATI TECNICI FILETTI RIPORTATI DIN 8140
S (Inch / pollice)
BSF
3/16 - 32
1/4 - 26
5/16 - 22
3/8 - 20
7/16 - 18
1/2 - 16
9/16 - 16
5/8 - 14
3/4 - 12
7/8 - 11
1" - 10
1"1/8 - 9
1"1/4 - 9
1"3/8 - 8
1"1/2 - 8
BSW
1/8 - 40
3/16 - 24
1/4 - 20
5/16 - 18
3/8 - 16
7/16 - 14
1/12 - 12
9/16 - 12
5/8 - 11
3/4 - 10
7/8 - 9
1" - 8
1"1/8 - 7
1"1/4 - 7
1"1/2 - 6
G(BSP)
1/8 - 28
1/4 - 19
3/8 - 19
1/2 - 14
5/8 - 14
3/4 - 14
7/8 - 14
1"- 11
1"1/4 - 11
1"1/2 - 11
R (Inch / pollice)
1D
1.5D
2D
2.5D
3D
1D
1.5D
2D
2.5D
3D
1D
1.5D
2D
2.5D
3D
.328
.423
.517
.600
.687
.781
.844
.946
1.125
1.284
1.450
1.625
1.750
1.937
2.062
.422
.548
.673
.787
.906
1.031
1.125
1.259
1.500
1.722
1.950
2.187
2.375
2.625
2.812
.515
.673
.829
.975
1.124
1.281
1.406
1.571
1.875
2.159
2.450
2.750
3.000
3.312
3.562
.609
.798
.986
1.162
1.343
1.531
1.687
1.884
2.250
2.596
2.950
3.312
3.625
4.000
4.312
.703
.923
1.142
1.350
1.562
1.781
1.969
2.196
2.625
3.034
3.450
3.875
4.250
4.687
5.062
.297
.385
.472
.550
.632
.719
.781
.875
1.042
1.193
1.350
1.514
1.639
1.812
1.937
.390
.510
.628
.737
.851
.969
1.062
1.187
1.417
1.631
1.850
2.076
2.264
2.500
2.687
.484
.635
.784
.925
1.069
1.219
1.344
1.500
1.792
2.068
2.350
2.639
2.889
3.187
3.437
.578
.760
.940
1.112
1.288
1.469
1.625
1.812
2.167
2.506
2.850
3.201
3.514
3.875
4.187
.672
.885
1.096
1.300
1.507
1.719
1.906
2.125
2.542
2.943
3.350
3.764
4.139
4.562
4.937
.187
.250
.312
.375
.437
.500
.562
.625
.750
.875
1.000
1.125
1.250
1.375
1.500
.281
.375
.469
.562
.656
.750
.844
.937
1.125
1.312
1.500
1.687
1.875
2.062
2.250
.375
.500
.625
.750
.875
1.000
1.125
1.250
1.500
1.750
2.000
2.250
2.500
2.750
3.000
.469
.625
.781
.937
1.094
1.250
1.406
1.562
1.875
2.187
2.500
2.812
3.125
3.437
3.750
.562
.750
.937
1.125
1.312
1.500
1.687
1.875
2.250
2.625
3.000
3.375
3.750
4.125
4.500
.237
.375
.475
.562
.656
.758
.875
.937
1.034
1.200
1.375
1.562
1.768
1.893
2.250
.300
.469
.600
.718
.844
.977
1.125
1.219
1.347
1.575
1.812
2.062
2.330
2.518
3.000
.362
.562
.725
.875
1.031
1.196
1.375
1.500
1.659
1.950
2.250
2.562
2.893
3.143
3.750
.425
.656
.850
1.031
1.219
1.415
1.625
1.781
1.972
2.325
2.687
3.062
3.455
3.768
4.500
.487
.750
.975
1.187
1.406
1.633
1.875
2.062
2.284
2.700
3.125
3.562
4.018
4.393
5.250
.212
.333
.425
.507
.594
.687
.792
.854
.943
1.100
1.264
1.437
1.625
1.750
2.083
.275
.427
.550
.663
.781
.906
1.042
1.135
1.256
1.475
1.701
1.937
2.187
2.375
2.833
.337
.521
.675
.819
.969
1.125
1.292
1.417
1.568
1.850
2.139
2.437
2.750
3.000
3.583
.400
.614
.800
.975
1.156
1.344
1.542
1.698
1.881
2.225
2.576
2.937
3.312
3.625
4.333
.462
.708
.925
1.132
1.344
1.562
1.792
1.979
2.193
2.600
3.014
3.437
3.875
4.250
5.083
.125
.187
.250
.312
.375
.437
.500
.562
.625
.750
.875
1.000
1.125
1.250
1.500
.187
.281
.375
.469
.562
.656
.750
.844
.937
1.125
1.312
1.500
1.687
1.875
2.250
.250
.375
.500
.625
.750
.875
1.000
1.125
1.250
1.500
1.750
2.000
2.250
2.500
3.000
.312
.469
.625
.781
.937
1.094
1.250
1.406
1.562
1.875
2.187
2.500
2.812
3.125
3.750
.375
.562
.750
.937
1.125
1.312
1.500
1.687
1.875
2.250
2.625
3.000
3.375
3.750
4.500
.286
.348
.411
.437
.536
.250
.312
.375
.437
.500
.125
.187
.250
.312
.375
.487
.612
.737
.862
.987
.434
.559
.684
.809
.934
.250
.375
.500
.625
.750
.612
.799
.987 1.174 1.362
.559
.747
.934 1.122 1.309
.375
.562
.750
.937 1.125
.821 1.071 1.321 1.571 1.821
.750 1.000 1.250 1.500 1.750
.500
.750 1.000 1.250 1.500
.946 1.258 1.571 1.883 2.196
.875 1.187 1.500 1.812 2.125
.625
.937 1.250 1.562 1.875
1.071 1.446 1.821 2.196 2.571 1.000 1.375 1.750 2.125 2.500
.750 1.125 1.500 1.875 2.250
1.196 1.634 2.071 2.509 2.946 1.125 1.562 2.000 2.437 2.875
.875 1.312 1.750 2.187 2.625
1.409 1.909 2.409 2.909 3.409 1.318 1.818 2.318 2.818 3.318 1.000 1.500 2.000 2.500 3.000
1.660 2.284 2.909 3.534 4.159 1.568 2.193 2.818 3.443 4.068 1.250 1.875 2.500 3.125 3.750
1.909 2.659 3.409 4.159 4.909 1.818 2.568 3.318 4.068 4.818 1.500 2.250 3.000 3.750 4.500
Recess
tacca
Follower pin
codolo
66
T (Inch / pollice)
Display VC 900
Espositore VC 900
Size
Qty.
Dimensioni
Quantità
M
M 5
M 6
M 8
M 10
M 12
M 14 x 1.25
M 5 - 12
5
5
5
5
5
3
3
Art.-No.
04009
04010
04012
04016
04021
04096
04081
Price
Total Price
€
€
21,40
23,10
29,40
31,40
35,20
48,50
149,50
107,00
115,50
147,00
157,00
176,00
145,50
448,50
1296,50
67
VÖLKEL GmbH
Morsbachtalstraße 18
D-42855 Remscheid
Telefon +49 2191 490112
Telefax +49 2191 490125
Postfach 15 01 28
D-42828 Remscheid
Email: [email protected]
Internet: www.voelkel.com