Model 8000 - Sierra Monitor
Download
Report
Transcript Model 8000 - Sierra Monitor
FieldServer Technologies
The gateway for device and
system interoperability
Networks
Devices
Company Introduction
Worldwide Operation
Division of Sierra Monitor Corporation
Headquartered in California’s Silicon Valley
Offices in major cities in the U.S.
Factory trained representatives throughout
the U.S., Europe, Latin America and
Asia/Pacific
Company Introduction
Sierra Monitor Corporation
Micro-cap Public Company – SRMC-OB
Headquarters - Milpitas CA
Design Center – Johannesburg South
Africa
Manufacturing – Milpitas CA
ISO 9001 and TUV Certified Panel Shop
Corporate Culture
Quality Products
•
•
•
•
•
•
•
•
ISO 9001;2000 Registered
FM Approval
UL Recognized
CE Mark
City of Los Angeles Approved
Mil Spec Approved
Bellcore Approval
Quality award from Defense Department
Communication Challenges
Various systems in a plant or building must
communicate with each other or to a
common control system
No common protocol in the industry
No single hardware supplier can provide
devices for all factory functions
Real world is not a controller speaking only
to a chain of slave devices
Data must be accessible at different points
for different uses
Company Introduction
FieldServer Solution
Protocol inter-communication is our
business, not a sideline
A solution system, not a one-of-a-kind patch
Experienced in driver development and
protocol translation – building automation
and industrial automation industries
Robust, reliable hardware combined with
proven software results in adaptability for
any interface challenge
Ease of start-up combined with proven aftersale factory support
Company Introduction
FieldServers
FieldServer – the Interoperability Solution
Wide range of products
• QuickServer – low cost, 250 points,
Building Automation protocols
• FS-B20 – 500-1000 points, all protocols
fully-configurable
• FS-B35 – multiple serial & Ethernet
ports, ControlNet, Profibus, DeviceNet
• FS-B40 – 10 ports, multiple devices
Largest driver library in the industry
Company Introduction
FS-B30 Series
Interoperability Solution
Single device to device interface
Compact Size
Four Serial Port
Two Ethernet
LonWorks Option
ControlNet, DeviceNet
& Profibus
Internal buffering
Company Introduction
FS-B30 Interface
Power
Connection
RS-232 or RS-485
Serial Port
Ethernet Port
LonWorks
Connection
Company Introduction
How it Works
User configurable
• Poll times
• Protocols
• Port usage
Data caching
BACnet
Bridge
Data Array
Scan
Blocks
Modem support
Notifier
Communications Bridge
Modbus
LonWorks
FieldServer Architecture
Building
Management
System
Plant Controls
(BACnet IP, Modbus TCP,
or other Ethernet protocols)
BACnet MS/TP
LonWorks
Modbus
Profibus
Metasys
Proprietary Protocol
BAS Devices/Drivers
BAS Devices/Drivers
Comprehensive BAS driver library for:
•
•
•
•
•
•
•
•
•
•
•
Distributed Control Systems
AC Controls
Chillers
Boiler controls
Fume Hood Controllers
Energy Management Systems
Fire Alarm Panels
Variable Frequency Drives (VFD)
Fume Hood Controllers
Building Automation Systems
....
Current Drivers
Building Automation Control Drivers
BACnet
Fire Alarm Panels
Canatal
Grinnell TFX - Minerva
Caterpillar
EST3 & EST Quickstart
Cleaver Brooks Hawk
Notifier – AFP, INA, AM
Data Aire
FCI 7100/7200
Carrier
Fike Cheetah
McQuay
Secutron
Lutron
Simplex 4100
LonWorks
Siemens MXL & XLS
Metasys N2
Vesda
Yorktalk
Current Drivers
Company Specific Drivers
SMC 2460
ATMI
Zellweger System 16
ILCO
Zellweger CM4
Pneumatic Products
SGS Ethernet
United Power
Weightronics
Cyberex
Telosense TGM/ACM
Spectronics
Gardner Denver
RussElectric
Canatel
Current Drivers
Process Control Drivers
Allen Bradley DF1
Allen Bradley DH+
Allen Bradley TCP
ControlNet
DNP 3.0
GE Mark IV
Opto 22
Modbus ASCII
Modbus RTU
Modbus TCP
Modbus Plus
GE-SRTP
OPC
Profibus DP and MS
SNMP
Telnet
TL1
DDE
GE-SNP
FieldServer Options
Custom Configuration
• User supplies point information, FieldServer will configure the
system with mapping of all desired points
Memory upgrade –
• Standard FS-B20 is for 500 points – upgrade to 1000 points
• Standard FS-B30 is 1000 points – upgrades to 10,000 points
• Standard FS-B40 is 1000 points – upgrades to 10,000 points
Mounting
• FS-B20 – DIN rail mounting option
• FS-B30 - DIN rail mounting option
• FS-B40 – 19 inchRack mount or wall mounting options
Factory Training
Extended Warranty
Custom Configuration
FST provides a custom configuration service in
which we will map the LonWorks data to the other
protocol and download and test it on the
FieldServer prior to shipment
Information provided to FieldServer
• Network diagram/topology indicating Server and
Client side network connections, media type,
protocol identification, master/slave relationships
and routing devices
• LonWorks node descriptions and network variable
descriptions (data points, node name, input/output,
SNVT type
• Non-LonWorks node descriptions and variable
descriptions (if FieldServer is client to that network)
FST Support
Inter-communications is the business of
FieldServer Technologies, our only business
We can offer standardized gateways
With factory configurations or factory trained
personnel, installation is made easy
The future is unlimited in the capability to
interface to other building control and
automation devices and networks
Proven factory support before, during and
after the sale
Associations
Company Introduction
Approvals
CE Marked
UL 1950 – FS-X40
Tested to
Comply with
FCC part 15
UL 916 – FS-X20
Company Introduction
Quality Policy
The Quality of
FieldServer Technologies
Products and Services
will Meet or Exceed
our Customer’s Requirements
FieldServer Technologies’ Quality
System is ISO 9001 Registered
Company Introduction