Transcript MF software upgrade procedure

MF software version 23
Instructions :
- Unzip the attached ZIP file in a folder
- Copy the entire contents of the folder onto a EMPTY USB stick . ATTENTION! Copy only the
files not the folder!!!
- Unplug the unit in order to turn off the power on the MF
- Press the two keys
shown in the picture and at the same time plug in the
power cord. Continue to press until the display shows "Press START to format...."
- Press START
- Wait...after cancellation the display shows: "Erase completed. Please reboot..."
- Unplug the power cord on the MF.
- Insert the USB stick (where you copied all the files) in the USB port behind the front grill.
- Plug in the power cord and wait.
- The electronic board will start to make "bip-bip" sound and the display screen will be white,
and then the display will turn black, WAIT!
- The unit will begin to upload all the cycles in the memory stick including images ...
- After the upload is complete the display will show the number of the copied files and will instruct
you to unplug the power cord and remove the USB stick.
- Unplug the power cord
- Remove the USB stick.
- Plug in the power cord.
- The MF is ready .
____________________________________
Massimo Maso
Responsabile Ufficio Tecnico Abbattitori
IRINOX spa
Via Madonna di Loreto, 6/b, 31010 Corbanese (TV), Italy
Phone: +39 0438 2020
Fax: +39 0438 2023
Mobile: +39 335 7858610
Videoconference: +39 0438 933029
Email: [email protected]
Web: http://www.irinox.com
____________________________________
This e-mail and any attachments are confidential and contain information intended for the addressee(s)
only.
Read, copy, disclosure or use by anybody else is unathorised.
If you are not the intended recipient, please delete this message and any attachment and advise the sender
by return e-mail.
____________________________________
Il contenuto di questo messaggio elettronico è riservato ed è rivolto esclusivamente al/ai destinatario/i
identificato/i.
Pertanto è probito leggerlo, copiarlo, divulgarlo o utilizzarlo da parte di chiunque salvo il/i
destinatario/i.
Se non siete il destinatario, vi invitiamo a cancellare il messaggio ed eventuali allegati e a darne
immediatamente comunicazione al mittente a mezzo posta elettronica.