Transcript WELKOM BIJ

WELKOM BIJ
Department MS3
DEPARTMENT MS3
MECHANICS OF SOLIDS, SURFACES AND SYSTEMS
Organisatie:
Voorzitter Prof.dr.ir. D.J. Schipper
Onderzoekscoordinator Dr.ir. V.T. Meinders
Onderwijscoordinator Prof.dr.ir. A. de Boer
Contact:
1. Mw. Bruinink, [email protected], 0534895630
2. Mw. Ter Horst, [email protected], 0534893596
3. Mw. Tjapkes, [email protected], 0534892502
4. Mw. Zimmerman van Woesik, [email protected],
WWW.UTWENTE.NL/CTW/MS3
0534892460
18-6-2014
Leerstoel versus Departement
2
Leerstoelen betrokken bij MS3
 Elastomer Technology and Engineering (ETE) headed by Prof.dr. A. Blume. (2)
Faculteit
 Mechanical Automation and Mechatronics (MA) headed by Dr.ir. R.G.K.M. Aarts. (3)
 Design of Mechanisms and Robotics (DMR) headed by Prof.dr.ir. J.L. Herder. (3)
Depatement1
Departement i
 Applied Laser Technology (LT) headed by Prof.dr.ir. A.J. Huis in ’t Veld. (3)
Departement n
 Production Technology (PT) headed by Prof.dr.ir. R. Akkerman. (1)
 Surface Technology and Tribology (STT) headed by Prof.dr.ir. D.J. Schipper. (1)
Leerstoel1
Leerstoel i
 Skin Tribology (ST) headed by Prof.dr.ir. E. van der Heide. (1)
Leerstoel12
 Tribology Based Maintenance (TBM) headed by Prof.dr.ir. P.M. Lugt. (1)
 Nonlinear Solid Mechanics (NSM) headed by Prof.dr.ir. A.H. van den Boogaard. (4)
Onderzoek en
geven onderwijs in
BSc en MSc
 Structural Dynamics & Acoustics (SDA) headed by Prof.dr.ir. A. de Boer. (4)
 Dynamics Based Maintenance (DBM) headed by Prof.dr.ir. T. Tinga. (4)
18-6-2014
3
18-6-2014
4
1
MASTERPROGRAM ME
Departement MS3
 Master is two year
 One year courses (60 ec)
Bij het department Mechanics of Solids, Surfaces & Systems
kies je in eerste instantie voor meerdere specialisaties.
 Plus one year practical training & assignment (60 ec)
Na een halfjaar (wanneer je meer inzicht hebt) kies je voor een
specialisatie.
Als je nu al voor 100% de specialisatie weet geef dat door
i.v.m. plannen kennismakingsgesprek
18-6-2014
MASTERPROGRAM MS3
5
6
MASTERPROGRAM ME
 Competence profiles (3 O’s):
1st
2nd
year
 Research & Development
year
 Design & Construction
Profile courses
25 EC
Department courses
 Organization & Management
Internship
Thesis
40 EC
20 EC
20 EC
Elective courses
15 EC
8
2
MASTERPROGRAM ME
Profile courses
http://www.utwente.nl/me/master_programme/study-programme-2014-2015/
R&D (4*5 = 20 EC)
- Fluid Mechanics 2
Q1
- Transport Phenomena
Q1
- Linear Solid Mechanics
Q3
- System Identification & Parameter Estimation
S2
- Solids and Surfaces
S1
- Numerical Methods in Mechanical Engineering
S1
Ander profiel (1*5 = 5 EC)
- Design Principles of Precision Mechanisms
S2
OF
- Numerical Methods in Mechanical Engineering
S1
9
Profile courses
Department courses (4 out of 5 = 20 EC)
D&C (4*5 = 20 EC)
- Design of Biomedical Products
Q1
- Product Design
Q1
- Process Equipment Design
Q3
- Design, Production & Materials
Q2+Q3
- Design Principles of Precision Mechanisms
S2
- Numerical Methods in Mechanical Engineering
S1
Ander profiel (1*5 = 5 EC)
- Linear Solid Mechanics
Q3
- System Identification & Parameter Estimation
S2
- Computational Structural Optimization
Q2
- Dynamics & Control
S1
- Nonlinear Solid Mechanics
Q4
- Plastic and Elastomer Engineering
S1
- Experimental Methods
S2
3
Elective courses (15 EC) (R&D, D&C)
• Elastomeric Technology
• Composites
• Rheology and Processing of Thermoplastics
•
•
•
•
•
•
•
•
•
•
Motion and Vibration Control
Dynamics of Machines
Engineering Acoustics
Multi Body Dynamics (under development)
Signal Processing for Acoustics & Vibrations
Composites Forming
Moulding Technology (under development)
Laser Material Processing
Tribology
Surface Technology
Profile courses
R&D eerste semester
Q1 Q2
- Fluid Mechanics 2 of Transport Phenomena
5
- Solids and Surfaces
2,5 2,5
- Numerical Methods in Mechanical Engineering
2,5 2,5
- Dynamics & Control
2,5 2,5
- Plastic and Elastomer Engineering
2,5 2,5
- Computational Structural Optimization
-
Totaal
5
15
15
• Failure mechanisms & life prediction
• Structural Health & Condition monitoring
• Capita Selecta
Profile courses
Kennismakingsgesprekken
D&C eerste semester
Q1 Q2
- Product Design
5
- Design, Production & Materials
- Numerical Methods in Mechanical Engineering
2,5 2,5
- Dynamics & Control
2,5 2,5
- Plastic and Elastomer Engineering
2,5 2,5
- Computational Structural Optimization
Totaal
- Keuzevak
 Met één van de leerstoelhouders/ afstudeerhoogleraren
2,5
 Beperkte mogelijkheid in eerste 2 weken juli
5
12,5
 In tweede helft augustus
15
5
4
Assignment Specializations
Second Year ME
• Internship
- Applied Laser Technology
• 3 months in a company abroad or in The Netherlands
- Design of Mechanisms and Robotics
- Elastomer Technology and Engineering
• Assignment
- Mechanical Automation & Mechatronics
• Internal within one of the MS3 research groups
• External within a company or research institute with which
MS3 groups collaborate
- Nonlinear Solid Mechanics
- Production Technology (Composites & Smart Fibres)
- Dynamics & Tribology Based Maintenance
- Structural Dynamics & Acoustics
- Surface Technology and Tribology & Skin Tribology
MECHANICS OF SOLIDS,
SURFACES & SYSTEMS
w w w . u t w e n t e . n l / c t w / M S 3
6/18/2014
19
5