DAY 22: OVERVIEW OF ADVANTAGES OF CERAMICS temperature resistance high hardness low density corrosion resistance
Download ReportTranscript DAY 22: OVERVIEW OF ADVANTAGES OF CERAMICS temperature resistance high hardness low density corrosion resistance
DAY 22: OVERVIEW OF ADVANTAGES OF CERAMICS temperature resistance high hardness low density corrosion resistance SPECIAL DESIGN CONSIDERATIONS FOR CERAMICS brittleness difficulty of manufacture. Material Melting Temperature Melting Temperature, C NaCl 801 Iron, Fe 1535 Aluminum Ni based superalloy 1260-1335 W 3300 Al2O3 2045 SiC 2500* Si3N4 1900* ZrO2 2700 Thermal Expansion Material Linear Thermal Exp. Coef. (cm/cm C x 106) NaCl 40 Nylon 6,6 144 Polycarbonate 122 Fe alloys 12 Al alloys 21-24 Ni based superalloy 12-17 W 4.5 Al2O3 7-8 SiC 4.1-4.6 Si3N4 2.7-3.1 ZrO2 9-10 Modulus of Elasticity Material NaCl Nylon 6,6 Polycarbonate Elastic Modulus (psi x 106) 6.4 1.6-3.8 1.9-3 Fe alloys 30 Al alloys 10 Ni based superalloy W 30.4 58 Al2O3 40-55 SiC 30-70 Si3N4 44 ZrO2 20 Electrical Conductivity Material Resistivity (ohm-m) Nylon 6,6 1012 Polycarbonate 1014 Fe alloys 10-7 Al alloys 10-8 Ni based superalloy 10-7 W 10-8 Al2O3 1014 SiC 109 Si3N4 1014 ZrO2 1010 Thermal Conductivity Material Thermal Conductivity W/m-K Nylon 6,6 0.24 Polycarbonate 0.20 Fe alloys 52 Al alloys 130-220 Ni based superalloy W 10-20 155 Al2O3 16-40 SiC 70-80 Si3N4 10-30 ZrO2 2-3 Graphite 100-190 Diamond 1500-4700 http://americas.kyocera.com/kicc/pdf/Kyocera_Material_Characteristics.pdf Ductility Material Nylon 6,6 Polycarbonate Fracture Toughness MPam 2.5-3 2.2 Ni based superalloy 60-75 Al alloys 20-60 Fe metal 20-100 ZrO2 7-12 SiC 5-6 Si3N4 4-6 Al2O3 4-6 Strength Richerson, 1992 Richerson, 1992 COMMON STRUCTURAL CERAMICS silicon carbide (SiC) silicon nitride (Si3N4) zirconia (ZrO2) alumina (Al2O3) Property Ceralloy 147-31E Ceralloy 147-31N Ceralloy 147-1E Ceralloy 147-1 Process Sinter Sinter Hot Press Reaction Bonded Density (g/cc) 3.25 3.21 3.1 2.4 Density (% Theoretical) >99.3 >99.5 >98.5 75 Flexural Strength (MPa) @ RT 700 800 700 240 Weibull Modulus 10-15 15-30 18 10 Elastic Modulus (GPa) 310 310 310 175 Poisson's Ratio 0.27 0.27 0.27 0.22 Hardness HV(0.3) Kg/mm2 1800 1800 1800 800 Fracture Toughness (MPa m1/2) 6.0 5.8 5.0 2.5 Abrasive Wear Resistance Parameter *** 1130 1110 1120 360 Thermal Exp Coeff. 106/C; 3.1 3.1 3.2 3.2 Thermal Cond (W/mK) @ 25 C 26 26 42 14 Thermal Shock Parameter (C)** 530 610 540 330 Elecrical Resistivity (ohmcm) 10^14 10^14 10^14 10^14 Applications Cutting Tools, Wear Components Automotive Components, Bearings, Wear Components Semiconductor Components, Wear Components Electrical Insulators, Sputtering Targets, Semiconductor Components Key Features Impact Strength, Net Shape Fabrication Strength, Hertzian Contact Strength, Structural Reliability, Net Shape Fabrication High Purity, Excellent Mechanical Properties High Purity, Net Shape Fabrication MANUFACTURING CERAMICS The following methods are used to shape the ceramics. Please not that (wetted) powder is key. SINTERING This is a process in which the small chunks of powder loose their identity, as the whole (porous) part is bonded. Temperature and often pressure are needed. Shrinkage has to be understood. DIE PRESSING (UNIAXIAL PRESSING) Most common and rapid for small ceramic components where speed of manufacture means more than strength and uniformity. Pressure, and densification is variable through the mold. The object will have varying properties, and maybe differential shrinkage on sintering. Hot pressing is a combination of sintering and die-pressing happening at once. ISOTACTIC PRESSING Pressure transmitted to the powder from a compressed fluid. More uniformity, less porosity An elastomer (rubber mold) serves as the interface. Slower rate of production. Best for cylindrical shapes, eg. Spark plug. Hot isotact pressing (HIP) combines sintering and isotactic pressing. EXTRUSION We add a plasticizing agent, which is later cooked away during sintering. SLIP CASTING Make a slurry by adding liquid to the powder. Pour into a porous mold. Fluid is absorbed by the mold leaving a drier layer of powder along the walls. Pour off remaining slurry, slip. Opening the mold reveals the thin-walled object. Ready to be sintered. INJECTION MOLDING This method holds the most promise for mass production of complex shapes as evidenced by its use in producing ceramic turbocharger rotors. A combination of 60-70% powder mixed with an organic binder to provide flow is injected into a mold. Prior to sintering, burnout of the binder must be done. Current restrictions include small wall thickness. Because of the cost of equipment, this is only cost-effective for large volumes, and for simple shapes, the dry pressing methods are more cost-effective. REACTION BONDING A solid powder and a gas or liquid react during sintering to densify and bond. In Reaction Bonded Silicon Nitride, silicon powder is fired in the presence of high pressure nitrogen gas, and the reaction forms Si3N4. Advantage: very low shrinkage. Disadvantage: high porosity and lower strengths. MORE REACTION BONDING Reaction bonded silicon carbide, RBSC, is made by infiltrating liquid silicon into a compact of carbon and silicon carbide. The Si reacts with the carbon to form SiC which then bonds with the original SiC particles. Pores are filled with liquid Si. Consequently, high temperature strength falls off at silicon's melting temperature. Dimensional changes with RBSC can be less than 1%. One interesting variation is to use carbon fibers rather than carbon particles. ENGINE PRODUCTS Kyocera engine products include cam rollers, turbocharger rotors, glow plugs, cylinder liners, seals, pistons, piston pins, valve and valve guides, fuel injection parts and various custom made components made from a wide selection of advanced ceramic materials. Ceramic Piston Head and Rings Ceramic Cam Roller Ceramic Seal Assembly Ceramic Turbocharger Rotor TEXTILE MANUFACTURING Kyocera's wide range of ceramic materials, such as alumina, cermet, sapphire, zirconia and silicon nitride, coupled with excellent forming and finishing capabilities provides the basis for expanding the applications of ceramic textile components. Guides and Finish Tips http://americas.kyocera.com/kicc/industrial/textiles.html SEAL, PUMP AND VALVE Kyocera seal, pump and valve products include alumina faucet discs, alumina and silicon carbide automotive water pump seals, alumina appliance seals, alumina blood seals, zirconia containment shells and various custom made components made from a wide range of advanced ceramic materials. Shafts and Valves Pump Parts http://americas.kyocera.com/kicc/industrial/seal.html Hip implants Advantages of Ceramics •Low friction •Biocompatibility •Compressive strength http://ceramics.org/ceramictechtoday/tag/capacitor/ http://www.amjorthopedics.com/html/new/0605.asp Hip implants Disadvantage of Ceramics •Low Ductility http://emedicine.medscape.co m/article/398669-media ARMOR http://www.coorstek.com/resources/8510-091_Ceramic_Armor.pdf ARMOR http://www.coorstek.com/resources/8510-091_Ceramic_Armor.pdf THERMAL SHOCK RESISTANCE http://americas.kyocera.com/kicc/industrial/seal.html ALUMINA Alumina is the most widely used advanced ceramic material. It offers very good performance in terms of wear resistance, corrosion resistance and strength at a reasonable price. Its high dielectric properties are beneficial in electronic products. Applications include armor, semiconductor processing equipment parts, faucet disc valves, seals, electronic substrates and industrial machine components. http://americas.kyocera.com/kicc/industrial/types.html SILICON CARBIDE Silicon carbide has the highest corrosion resistance of all the advanced ceramic materials. It also retains its strength at temperatures as high as 1400°C and offers excellent wear resistance and thermal shock resistance. Applications include armor, mechanical seals, nozzles, silicon wafer polishing plates and pump parts. http://americas.kyocera.com/kicc/industrial/types.html SILICON NITRIDE Silicon nitride exceeds other ceramic materials in thermal shock resistance. It also offers an excellent combination of low density, high strength, low thermal expansion and good corrosion resistance and fracture toughness. Applications include various aerospace and automotive engine components, papermaking machine wear surfaces, armor, burner nozzles and molten metal processing parts. http://americas.kyocera.com/kicc/industrial/types.html ZIRCONIA Zirconia has the highest strength and toughness at room temperature of all the advanced ceramic materials. The fine grain size allows for extremely smooth surfaces and sharp edges. Applications include scissors, knifes, slitters, pump shafts, metal-forming tools, fixtures, tweezers, wire drawing rings, bearing sleeves and valves. http://americas.kyocera.com/kicc/industrial/types.html SUMMARY OF MATERIALS Hot-pressed silicon nitride (HPSN) has the strongest specific strength (strength/density) at 600oC of any material. It has excellent thermal shock resistance. Sintered silicon nitride (SSN) has high strength and can be formed into complex shapes. Reaction-bonded silicon nitride (RSBN) can be formed into complex shapes with no firing shrinkage. Hot-pressed silicon carbide (HPSC) is the strongest of the silicon carbide family and maintains strength to very high temperatures (1500oC). Sintered silicon carbide (SSC) has high temperature capability and can be formed into complex shapes Reaction-bonded silicon carbide (RSBC) can be formed into complex shapes and has high thermal conductivity. Partially stabilized zirconia (PSZ) is a good insulator and has high strength and toughness. It has thermal expansion close to iron, facilitating shrink fit attachments.