Location map with superimposed top Frio structure (depth feet subsea)00 # # # 400 # # 410 0 ##4800420045000 #0460040 # #45004700100 #48 00 #4700# # ## #490049 SGH# 2 # SGH# 1? P&A Clea red pad SGH# 4 mo ni to.
Download ReportTranscript Location map with superimposed top Frio structure (depth feet subsea)00 # # # 400 # # 410 0 ##4800420045000 #0460040 # #45004700100 #48 00 #4700# # ## #490049 SGH# 2 # SGH# 1? P&A Clea red pad SGH# 4 mo ni to.
Location map with superimposed top Frio structure (depth feet subsea) 44 00 4500 4600 # # 4900 # 3900 40 0 0 # # 410 0 # 0 # 4 4800 300 420 440 0 0 450 430 0 0 0 #0 4400 460 49 0 48 40 # # 00 4500 00 4700 4 100 # 4600 48 00 # 4200 4700 4900 # # # 4300 # # 4800 4900 4400 00 49 5300 SGH# 2 # 5000 5000 SGH# 1? P&A Clea red pad SGH# 4 mo ni to r # INe wwell i je ctor n well # # 4500 5000 SGH #3 # Experiment 4600 # 4700 # 51 0 00 # 41 0 42 0 39 5100 520 0 4700 # 0 470 5000 FM 1409 4600 4 600 4800 # 4500 4700 # 0 390 00 40 CR 460 Dugat Road 42 00 4300 440 0 4800 00 # 0 520 4900 00 50 2000 0 2000 4000 Feet Setting: The Gulf Coast is host to many heavy industries deeply involved with carbon fuels. This photo shows one of the tubular (pipe) suppliers that supports the oil and gas industries, several refineries, and a gas-fired power plant on US 90 as you drive to the site. Photo: SDH BEG The Trinity River flood plain is wetland. The site is on the terrace marginal to the wetland and is prone to flooding during heavy rain and high water. Photo: SDH BEG Texas American tank battery. Oil production has dominated land use for 50 years. Photo: SDH BEG Access to site is typical oil-field road Photo: P. R. Knox Sun-Gulf-Humble #4, condition before project start. This well has now been recompleted as an observation well in the Frio. Photo: P. R. Knox Well pad of Sun-Gulf-Humble #4, looking south condition before project start Photo: P. R. Knox The well pad was extended, bermed and additional gravel and cement added to stabilize wet clay soils. Onsite pit for cuttings disposal behind, Photo: SDH BEG cellar for new well in foreground . Research team visit to pad 4/19/02 SGH #4 workover to convert it from oil production to a research observation well. The well was plugged at 5650 feet and the casing perforated to squeeze cement behind casing in the injection zone Photo: Spud Miller, Sandia Technologies Surface conductor was hammered to refusal at 113 feet. This large diameter pipe prevents wash-out of near surface sediment when the well was being drilled. Photo: Spud Miller, Sandia Technologies Rigging up Nicklos #1 to drill the injection test well Photo M. H. Holtz, BEG Sandia Technologies assistant site manager David Freeman working with drilling foreman to control drilling and select data collection points Drilling is a 24 hour operation Photo: S.D. Hovorka, BEG Activities on the derrick floor – setting surface casing Photo: S.D. Hovorka, BEG Spud Miller, Sandia Technologies site manger shows visitors from Japan the drill bit used to drill the surface hole. Photo: S.D. Hovorka, BEG To collect core the drill pipe is pulled back to the surface and the drilling bit replaced by a coring bit, which has a hole in the center. Photo: S.D. Hovorka, BEG Core recovered from selected intervals will be used to understand how CO2 moves underground. This core is from the Anahuac shale that limits upward movement of CO2. Brown ooze is drilling mud with red tracer (Rhodamine WT) in it. Photo: Spud Miller, Sandia Technologies Technicians from Core Lab quick freeze the core using dry ice (a use of CO2). This is needed because the Frio sandstone are poorly indurated and would break and shift during shipping if not frozen. Photo: S.D. Hovorka, BEG Core has been slabbed while still frozen, and samples cut for various types of analysis. Photo: S.D. Hovorka, BEG Schlumberger lifts logging tools to the drill platform in preparation for lowering them down the borehole on wireline. Photo: S.D. Hovorka, BEG Collecting MDT data. Tool is hung on wire to a depth of 5050 feet while data are collected in the truck. Injection well Resulting logs Top A ss Top B ss Top C ss Proposed injection zone Prepared by Mark Holtz Observation well C Sand Core Log Depth CORE GR 5050 5060 5070 5080 Prepared by Shinichi Sakurai Log GR & FMI Image Samples of fluid collected at depth are kept at pressure and shipped to Yousif Kharaka at USGS for chemical analysis of natural gas and water composition. Brines were found to be reasonable representative of subsurface conditions and near saturation with methane. Photo: S.D. Hovorka, BEG When the borehole was drilled to total depth of 5753 feet and well casing installed, cement was circulated behind the casing to fill annular space. The well is not yet completed. We still have to perforate the casing and so that brine from the rocks can enter the wells. Here rig hands install the cement shoe. Photo: S.D. Hovorka, BEG Staff from Lawrence Berkeley National Lab set up to collect downhole geophysics including VSP and crosswell data. Photo: S.D. Hovorka, BEG