Transcript Unix programming INDEX UNIT-I PPT SLIDES Srl. No. Module as per Session planner 1.

Unix programming
1
INDEX
UNIT-I PPT SLIDES
Srl. No.
Module as per Session planner
1. Introduction to Unix file system
2. vi editor
Lecture No.
L1
L2
PPT Slide No.
1-8
9-15
3. file handling utilities-cp, mv,ln
L3
16-19
4. Rm, unlink, mkdir, rmdir, find
L4
20-24
5. security by file permissions
L5
25-30
6. process utilities
L6
31-33
7 .disk utilities
L7
34-38
8. ulimit , unmask
L8
39-40
9. networking commands
L9
4146
2
What is UNIX?
• A computer operating system. It is
designed to be used by many people
at the same time (multi-user).
• Runs on a variety of processors
• It provides a number of facilities:
– management of hardware resources
– directory and file system
– loading / execution / suspension of
programs
3
1.3. Why Use UNIX?
•
•
•
•
•
multi-tasking / multi-user
networking capability
graphical (with command line)
easy to program
portable (PCs, mainframes,
super-computers)
continued
4
• File: s a container for storing
information.
• A file is of 3 types.
• Ordinary file: It contains data as a
stream of characters. It is of 2 types.
• Text file: contains printable characters.
• Binary file: contains both printable &
non printable characters.
• Directory file: contains no data but it
maintains some details of the files &
subdirectories that it contains.
5
• Every directory entry contains 2
components.
• 1.file name.
• 2.a unique identification number for the
file or directory.
• Device file: It represents the device or
peripheral.
6
The UNIX File System
• A simplified UNIX directory/file
system:
/
bin
...
dev
lib
usr
User
User1
User2
tmp
...
User3
7
• /Bin: contains executable files for most of the
unix commands.
• /Dev: contain files that control various input
& output devices.
• /Lib: contains all the library functions in
binary form.
• /Usr: contains several directories each
associated with a particular user.
• /Tmp: contain the temporary files created by
unix or by any user.
• /Etc: contains configuration files of the
system.
8
vi Editor
• vi is a full screen text editor. It was
created by Bill Joy.
• Bram Moolenaor improved it and
called it vim (vi improved).
• Invoking vi:
• $Vi file name
9
Modes of operation
• Vi has 3 mode of operation.
• 1.Command mode: In this mode all the
keys pressed by the user are
interpreted as commands. It may
perform some actions like move
cursor, save, delete text, quit vi, etc.
2.Input/Insert mode: used for
inserting text.
– start by typing i; finish with ESC
10
Modes of operation
• Ex mode or last line mode:
• Used for giving commands at
command line.
• The bottom line of vi is called the
command line.
11
Basic Cursor Movements
h
j
k
l
w
b
move cursor one place to left
down one
up one
right one
move forward one word
back one word
12
Finishing a vi Session
• Get to command mode (press ESCs)
ZZ
save changes to the file and
quit
(no RETURN)
:q!
quit without saving
(press RETURN)
:wq! Saves the file & quit.
13
Inserting Text
No RURN
• Move to insertion point
• Switch to input mode:
i
• Start typing; BACKSPACE or DELETE
for deletion
• ESC
mode
finish; back in command
14
Deletion
• Must be in command mode.
x
dd
D
u
Delete character that cursor is on.
Delete current line.
Delete from cursor position to
end of line
Undo last command
15
File handling utilities
• Cp (Copying Files)
– To create an exact copy of a file you can
use the “cp” command. The format of this
command is:
cp [-option] source destination
Eg:
Cp file1 file2
Here file1 is copied to file2.
Eg:
Cp file1 file2 dir
File1 file2 are copied to dir.
16
• Copying Files
Cp turns to interactive when –i option is
used & destination file also exists.
$cp -i file1 file2
overwrite file2 (yes/no)?
Y at this prompt overwrites the
file.
17
• mv (Moving and Renaming Files)
Used to rename the
files/directories.
$mv test sample
Here test is renamed as sample.
18
• ln (link):
• Used to create links (both soft & hard
links).
• It creates the alias & increase the link
count by one.
• $ln file1 file2
• ln won’t work if the destination file also
exists.
19
• Rm (Deleting Files and Directories)
– To delete or remove a file, you use the
“rm” command. For example,
$rm my. listing
will delete “my.listing”.
With –i option removes the files
interactively.
$rm –i file1
With –r option recursively removes
directories.
$rm –r dir1
20
• mkdir: used to create one or more
directories.
• $mkdir book
Creates the directory named book.
• $mkdir dbs doc dmc
Creates three directories.
21
• rmdir (remove directories ):
• Removes empty directories.
• $rmdir book
removes directory named book if it is
empty.
• $rmdir dbs doc dmc
Removes 3 directories.
22
• find: It recursively examines a directory
tree to look for matching some criteria
and then takes some action on the
selected files.
Syntax:
• find path_list selection_criteria action
• To locate all files named a. out use
$find / -name a. out –print
• ‘/’ indicates search should start from
root directory.
23
• To locate all c files in current directory
$find . -name “*.c” –print
• To find all files begin with an uppercase
letter use
$find . –name ‘[A-Z]*’ –print
Find operators:
Find uses 3 operators
!,-a ,-o
24
Security by file permissions
Unix follows a 3-tiered file protection
system.
owner’s permission other’s permission
-rwx
Type of file
r-x r-group’s permissions
Each group represents a category. There
are 3 categories-owner ,group ,others.
25
Security by file permissions
• Each category contains read ,write
,execute permissions .
• rwx->presence of all permissions.
• r-x->absence of write permission
• r-- -> absence of write ,execute
permission
• Chmod: changing file permission
chmod sets a file’s permissions (read,
write and execute) for all three
categories of users (owner, group and
26
• Syntax:
chmod category operation permission file(s)
The command contains three
components:
• category of a user (owner, group or
others)
• operation to be performed (assign or
remove a permission)
• Permission type (read, write or execute)
27
• Abbreviations used by chmod:
Category
operation
u-user
+-assign permission
g-group
--remove permission
o-others
=-assigns absolute
permission
a-all
permissions
r-read permission
w-write permission
x-execute permission
28
• Absolute assignment:
Absolute assignment by chmod is done
with the = operator. Unlike the + or –
operator s, it assigns only those
permissions that are specified along
with it and removes other permissions.
If u want to assign only read permission
to all three categories and remove all
other permissions from the file small
use
chmod g-wx,o-x small
Or simply use = operator in any of the 29
chmod ugo=r small
chmod a=r small
Chmod =r small
The octal notation:
Chmod also takes a numeric argument
that describes both the category and
the permission. The notation uses octal
numbers. Each permission is assigned
a number like
read permission-4, write permission-2,
execute permission-1
30
Process utilities
• Ps (process status):
• Display some process attributes.
• $ps
PID TTY TIME CMD
1078 pts/2 0:00 bash
• Ps presents a snapshot of the process
table.
31
Process utilities
• Ps with –f option displays a fuller
listing that includes the PPID.
• Ps with –u option followed by user-id
displays the processes owned by the
user-id.
• Ps with –e option displays the system
processes.
32
• Who: know the users
• Displays the users currently logged in
the system.
• $who
• Whoami: Show you the owner of this
account
• $whoami
• W: Tell you who is logging in and doing
what!
• $w
33
• Finger: Displays the information about
the users.
• $finger user
Find out the personal information of a
user
• $finger name
Try to find the person’s info. by his/her
name
• finger email-address
Try to find the person’s info across the
network
34
Disk utilities
• Du: disk usage
• Du estimate the file space usage on the
disk.
• It produces a list containing the usage
of each subdirectory of its argument
and finally produces a summary.
• $du /home/usr1
35
Disk utilities
• Df: displays the amount of free space
available on the disk. The output
displays for each file system
separately.
• $df
• Mount:
• Used to mount the file systems.
• Takes 2 arguments-device name ,mount
point.
36
Disk utilities
• Mount uses an option to specify the
type of file system.
• To mount a file system on the /oracle
directory on Linux system use
$mount –t ext2 /dev/hda3 /oracle
$mount –t iso9660 /dev/cdrom /mnt
/cdrom
$mount –t vfat /dev/hda1 /msdos
$mount –t msdos /dev/fd0 /floppy
37
Disk utilities
• Umount: unmounting file systems
• Unmounting is achieved with the
umount command. which requires
either file system name or the mount
point as argument.
• $umount /oracle
• $umount /dev/hda3
• Unmounting a file system is not
possible if the file is opened.
38
• ulimit: user limit
• It contains a value which signifies the
largest file that can be created by the
user in the file system.
• When used by itself it displays the
current setting.
• $ulimit
unlimited
User can also set the ulimit value by
using
$ulimit 10
39
unmask:
When u create files and directories, the
default permissions that are assigned
to them depend on the system’s default
setting. Actually this default is
transformed
By subtracting the user mask from it to
remove one or more permissions. This
value is evaluated by umask without
arguments.
$umask
40
022
Networking commands
• ftp: file transfer protocol
• ftp is used to transfer files. It can be
used
with host name.
$ftp Saturn
Connected to Saturn
220 Saturn ftp server
Name (Saturn: summit ): Henry
Password: ******
41
• To quit ftp use close and then bye or
quit.
• ftp>close
221 good bye
• ftp>bye
• Transferring files:
Files can be of 2 types.
• Uploading( put & mput):
• To upload ur web pages & graphic files
to website.
The put command sends a single file to
the remote machine.
42
• ftp>binary
200 type set to I
• ftp>put penguin. gif
To copy multiple files use mput.
• ftp>mput t*.sql
• Downloading files: get & mget
• To download the files from remote
machine use get & mget.
• ftp>get ls-lR.gz
• ftp>_
43
Networking commands
telnet: Remote login
If u have an account on the host in a local
network (or on internet ),u can use this
with the host name or the ip address as
argument.
$telnet Saturn
Trying to 192.168.0.1…
Connected to Saturn
44
• Login:---• Password:----• U can quit telnet by using exit
command.
• telnet prompt:
When telnet used without Ip address the
system displays a telnet> prompt . U
can invoke a login session from here
with open.
telnet> open 192.168.0.8
Trying to 192.168.0.8…
Connected to 192.168.0.8
45
Networking commands
• rlogin: remote login without password
• rlogin is the Berkley's implementation of the
remote login facility.
• U can log on to ur own identical remote
account without using either the user name
or password.
• $rlogin Jupiter
• Last login :….
• rlogin is terminated with ctrl+d or exit or
logout.
46