Transcript Logistic Regression Psy 524 Ainsworth What is Logistic Regression? • • Form of regression that allows the prediction of discrete variables by a mix of continuous and.

Logistic Regression
Psy 524
Ainsworth
What is Logistic Regression?
•
•
Form of regression that allows the
prediction of discrete variables by a mix
of continuous and discrete predictors.
Addresses the same questions that
discriminant function analysis and
multiple regression do but with no
distributional assumptions on the
predictors (the predictors do not have to
be normally distributed, linearly related or
have equal variance in each group)
What is Logistic Regression?
•
Logistic regression is often used because
the relationship between the DV (a
discrete variable) and a predictor is nonlinear
•
Example from the text: the probability of
heart disease changes very little with a tenpoint difference among people with low-blood
pressure, but a ten point change can mean a
drastic change in the probability of heart
disease in people with high blood-pressure.
Questions
•
Can the categories be correctly predicted
given a set of predictors?
•
•
•
Usually once this is established the predictors
are manipulated to see if the equation can be
simplified.
Can the solution generalize to predicting new
cases?
Comparison of equation with predictors plus
intercept to a model with just the intercept
Questions
•
What is the relative importance of each
predictor?
•
•
How does each variable affect the outcome?
Does a predictor make the solution better or
worse or have no effect?
Questions
•
Are there interactions among predictors?
•
•
•
•
Does adding interactions among predictors
(continuous or categorical) improve the
model?
Continuous predictors should be centered
before interactions made in order to avoid
multicollinearity.
Can parameters be accurately predicted?
How good is the model at classifying
cases for which the outcome is known ?
Questions
•
What is the prediction equation in the presence
of covariates?
Can prediction models be tested for relative fit
to the data?
•
•
•
So called “goodness of fit” statistics
What is the strength of association between the
outcome variable and a set of predictors?
•
Often in model comparison you want non-significant
differences so strength of association is reported for
even non-significant effects.
Assumptions
•
The only “real” limitation on logistic
regression is that the outcome must
be discrete.
Assumptions
•
•
If the distributional assumptions are met
than discriminant function analysis may
be more powerful, although it has been
shown to overestimate the association
using discrete predictors.
If the outcome is continuous then
multiple regression is more powerful
given that the assumptions are met
Assumptions
•
Ratio of cases to variables – using
discrete variables requires that there are
enough responses in every given
category
•
•
If there are too many cells with no responses
parameter estimates and standard errors will
likely blow up
Also can make groups perfectly separable
(e.g. multicollinear) which will make
maximum likelihood estimation impossible.
Assumptions
•
Linearity in the logit – the regression
equation should have a linear
relationship with the logit form of the
DV. There is no assumption about the
predictors being linearly related to
each other.
Assumptions
•
•
•
Absence of multicollinearity
No outliers
Independence of errors – assumes a
between subjects design. There are
other forms if the design is within
subjects.
Background
•
Odds – like probability. Odds are usually
written as “5 to 1 odds” which is
equivalent to 1 out of five or .20
probability or 20% chance, etc.
•
•
The problem with probabilities is that they
are non-linear
Going from .10 to .20 doubles the probability,
but going from .80 to .90 barely increases
the probability.
Background
•
Odds ratio – the ratio of the odds over
1 – the odds. The probability of
winning over the probability of losing.
5 to 1 odds equates to an odds ratio
of .20/.80 = .25.
Background
•
Logit – this is the natural log of an
odds ratio; often called a log odds
even though it really is a log odds
ratio. The logit scale is linear and
functions much like a z-score scale.
Background
LOGITS ARE CONTINOUS, LIKE Z
SCORES
p = 0.50, then logit = 0
p = 0.70, then logit = 0.84
p = 0.30, then logit = -0.84
Plain old regression
•
Y = A BINARY RESPONSE (DV)
•
•
•
•
•
1 POSITIVE RESPONSE (Success) P
0 NEGATIVE RESPONSE (failure) Q = (1-P)
MEAN(Y) = P, observed proportion of
successes
VAR(Y) = PQ, maximized when P = .50,
variance depends on mean (P)
XJ = ANY TYPE OF PREDICTOR 
Continuous, Dichotomous, Polytomous
Plain old regression
Y | X  B0  B1 X1  
•
and it is assumed that errors are
normally distributed, with mean=0
and constant variance (i.e.,
homogeneity of variance)
Plain old regression
ˆ
E(Y | X )  B0  B1 X1
• an expected value is a mean, so
•
ˆ
(Y  ˆ )  PY 1 | X
The predicted value equals the proportion of
observations for which Y|X = 1; P is the
probability of Y = 1(A SUCCESS) given X, and
Q = 1- P (A FAILURE) given X.
Plain old regression
• For any value of X, only two errors ( Y  Y)ˆ
are possible, 1  ˆ AND 0  ˆ . Which
occur at rates P|X AND Q|X and with
variance (P|X)(Q|X)
Plain old regression
•
Every respondent is given a probability
of success and failure which leads to
every person having drastically
different variances (because they
depend on the mean in discrete cases)
causing a violation of the
homoskedasticity assumption.
Plain old regression
•
Long story short – you can’t use
regular old regression when you have
discrete outcomes because you don’t
meet homoskedasticity.
An alternative – the ogive
function
• An ogive function is a curved s-shaped
function and the most common is the
logistic function which looks like:
The logistic function
The logistic function
u
e
Yi 
u
1 e
• Where Y-hat is the estimated probability
that the ith case is in a category and u
is the regular linear regression
equation:
u  A  B1 X1  B2 X 2 
 BK X K
The logistic function
b0 b1 X1
e
ˆi  b0 b1X1
1 e
The logistic function
•
•
Change in probability is not constant
(linear) with constant changes in X
This means that the probability of a
success (Y = 1) given the predictor
variable (X) is a non-linear function,
specifically a logistic function
The logistic function
•
•
It is not obvious how the regression
coefficients for X are related to
changes in the dependent variable (Y)
when the model is written this way
Change in Y(in probability units)|X
depends on value of X. Look at Sshaped function
The logistic function
•
The values in the regression equation
b0 and b1 take on slightly different
meanings.
•
b0  The regression constant (moves
curve left and right)
• b1 <- The regression slope (steepness of
bcurve)
b
•
 The threshold, where probability of
success = .50
0
1
Logistic Function
• Constant regression
constant different
slopes
• v2: b0 = -4.00
b1 = 0.05 (middle)
• v3: b0 = -4.00
b1 = 0.15 (top)
• v4: b0 = -4.00
b1 = 0.025 (bottom)
1.0
.8
.6
.4
V4
V1
V3
.2
V1
V2
V1
0.0
30
40
50
60
70
80
90
100
Logistic Function
• Constant slopes with
different regression
constants
• v2: b0 = -3.00
b1 = 0.05 (top)
• v3: b0 = -4.00
b1 = 0.05 (middle)
• v4: b0 = -5.00
b1 = 0.05 (bottom)
1.0
.9
.8
.7
.6
.5
.4
V4
.3
V1
.2
V3
V1
.1
V2
V1
0.0
30
40
50
60
70
80
90
100
The Logit
•
By algebraic manipulation, the logistic
regression equation can be written in
terms of an odds ratio for success:
 P(Y  1| X i )   ˆ 

   ˆ   exp(b0  b1 X1i )
 (1  P(Y  1| X i ))   (1   ) 
The Logit
•
•
Odds ratios range from 0 to positive
infinity
Odds ratio: P/Q is an odds ratio; less
than 1 = less than .50 probability,
greater than 1 means greater than .50
probability
The Logit
•
Finally, taking the natural log of both
sides, we can write the equation in
terms of logits (log-odds):
 P(Y  1| X )   ˆ 
ln 

ln

b

b
X
0
1
1



 (1  P(Y  1| X ))   (1  ˆ ) 
For a single predictor
The Logit
 ˆ 
ln 
 b0  b1 X1  b2 X 2  bk X k

ˆ
(1


)

• For multiple predictors
The Logit
•
Log-odds are a linear function of the
predictors
The regression coefficients go back to
their old interpretation (kind of)
•
•
•
The expected value of the logit (logodds) when X = 0
Called a ‘logit difference’; The amount
the logit (log-odds) changes, with a one
unit change in X; the amount the logit
changes in going from X to X + 1
Conversion
•
•
EXP(logit) or = odds ratio
Probability = odd ratio / (1 + odd
ratio)